相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。Corrosion behaviors of 316 stainless steel and Inconel 625 alloy in chloride molten salts for solar energy storage
Mingjing Wang et al.
HIGH TEMPERATURE MATERIALS AND PROCESSES (2020)
Bimetallic metal-organic framework derived FeOx/TiO2 embedded in mesoporous carbon nanocomposite for the sensitive electrochemical detection of 4-nitrophenol
Minghua Wang et al.
SENSORS AND ACTUATORS B-CHEMICAL (2019)
Hot corrosion studies of boiler steels exposed to different molten salt mixtures at 950 °C
Sumit Mahajan et al.
ENGINEERING FAILURE ANALYSIS (2019)
Novel solid-solid phase-change cascade systems for high-temperature thermal energy storage
Alicia Bayon et al.
SOLAR ENERGY (2019)
Study of Material Compatibility for a Thermal Energy Storage System with Phase Change Material
Songgang Qiu et al.
ENERGIES (2018)
Interaction between austein-ferrite phases on passive performance of 2205 duplex stainless steel
Xuequn Cheng et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2018)
Role of copper/vanadium on the optoelectronic properties of reactive RF magnetron sputtered NiO thin films
Vengatesh Panneerselvam et al.
APPLIED NANOSCIENCE (2018)
THICKNESS DETERMINATION OF CORROSION LAYERS ON IRON USING XPS DEPTH PROFILING
Lukas Kalina et al.
MATERIALI IN TEHNOLOGIJE (2018)
Investigation into the behaviour of aluminium and steel under melt/freeze cyclic conditions
Rhys Jacob et al.
JOURNAL OF ENERGY STORAGE (2018)
Binderless, Free-Standing Porous Interconnects of Ni-Fe Alloy Decorated Reduced Graphene Oxide for Oxygen Evolution Reaction
Naveen Chandrasekaran et al.
LANGMUIR (2017)
Experimental research on the corrosion of X series pipeline steels under alternating current interference
Yanbao Guo et al.
ENGINEERING FAILURE ANALYSIS (2017)
Sigma Phase in Superduplex Stainless Steel: Formation, Kinetics and Microstructural Path
Glaucio Soares da Fonseca et al.
MATERIALS RESEARCH-IBERO-AMERICAN JOURNAL OF MATERIALS (2017)
Green one-pot synthesis of flowers-like Fe3O4/rGO hybrid nanocomposites for effective electrochemical detection of riboflavin and low-cost supercapacitor applications
Rajesh Madhuvilakku et al.
SENSORS AND ACTUATORS B-CHEMICAL (2017)
Stress assisted oxidative failure of Inconel 601 for thermal energy storage
Madjid Sarvghad et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2017)
A eutectic salt high temperature phase change material: Thermal stability and corrosion of SS316 with respect to thermal cycling
Ming Liu et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2017)
Corrosion of steel alloys in eutectic NaCl + Na2CO3 at 700 οC and Li2CO3 + K2CO3 + Na2CO3 at 450 οC for thermal energy storage
Madjid Sarvghad et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2017)
Materials selection of steam-phase change material (PCM) heat exchanger for thermal energy storage systems in direct steam generation facilities
F. Javier Ruiz-Cabanas et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2017)
Evaluation of corrosion resistance of A516 Steel in a molten nitrate salt mixture using a pilot plant facility for application in CSP plants
G. Garcia-Martin et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2017)
Corrosion resistance of alumina-forming alloys against molten chlorides for energy production. I: Pre-oxidation treatment and isothermal corrosion tests
J. C. Gomez-Vidal et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2017)
Cr2O3/carbon nanosheet composite with enhanced performance for lithium ion batteries
Zhiqin Cao et al.
RSC ADVANCES (2017)
In situ growth of NiO nanoparticles on carbon paper as a cathode for rechargeable Li-O-2 batteries
Hong-qiang Wang et al.
RSC ADVANCES (2017)
Mesoporous high surface area NiO synthesized with soft templates: Remarkable for catalytic CH4 deep oxidation
Xianglan Xu et al.
MOLECULAR CATALYSIS (2017)
Investigation on Ti6Al4V-V-Cr-Fe-SS316 Multi-layers Metallic Structure Fabricated by Laser 3D Printing
Wei Li et al.
SCIENTIFIC REPORTS (2017)
Preparation of high quality Microgranulate CrO3 based on green process design
Wenwen Cui et al.
CANADIAN JOURNAL OF CHEMICAL ENGINEERING (2017)
Thermal analysis of Al-Si alloys as high-temperature phase-change material and their corrosion properties with ceramic materials
Ryo Fukahori et al.
APPLIED ENERGY (2016)
Thermal energy storage using chloride salts and their eutectics
Philip D. Myers et al.
APPLIED THERMAL ENGINEERING (2016)
Investigation of sodium insertion into tetracyanoquinodimethane (TCNQ): results for a TCNQ thin film obtained by a surface science approach
R. Precht et al.
PHYSICAL CHEMISTRY CHEMICAL PHYSICS (2016)
Durability studies of solar reflectors: A review
A. Garcia-Segura et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2016)
Effective tube-in-tank PCM thermal storage for CSP applications, Part 1: Impact of tube configuration on discharging effectiveness
M. Belusko et al.
SOLAR ENERGY (2016)
Effective tube-in-tank PCM thermal storage for CSP applications, Part 2: Parametric assessment and impact of latent fraction
M. Belusko et al.
SOLAR ENERGY (2016)
Ni-loaded nanocrystalline ceria-zirconia solid solutions prepared via modified Pechini route as stable to coking catalysts of CH4 dry reforming
Vladislav A. Sadykov et al.
OPEN CHEMISTRY (2016)
Heat transfer fluids for concentrating solar power systems - A review
K. Vignarooban et al.
APPLIED ENERGY (2015)
Nanocrystalline Fe-Fe2O3 particle-deposited N-doped graphene as an activity-modulated Pt-free electrocatalyst for oxygen reduction reaction
Vishal M. Dhavale et al.
NANOSCALE (2015)
Determination of thermo-physical properties and stability testing of high-temperature phase-change materials for CSP applications
Ming Liu et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2015)
Corrosion behaviour of carbon materials exposed to molten lithium chloride-potassium chloride salt
Jagadeesh Sure et al.
CARBON (2014)
Colour performance investigation of a Cr2O3 green pigment prepared via the thermal decomposition of CrOOH
Shu-ting Liang et al.
CERAMICS INTERNATIONAL (2014)
A photoelectron spectroscopy study of lava stones
Domenico Andrea Cristaldi et al.
ANALYTICAL METHODS (2013)
Corrosion of a stainless steel and nickel-based alloys in high temperature supercritical carbon dioxide environment
V. Firouzdor et al.
CORROSION SCIENCE (2013)
Charge competition with oxygen molecules determines the growth of gold particles on doped CaO films
Yi Cui et al.
FARADAY DISCUSSIONS (2013)
Effects of laser peening on stress corrosion cracking (SCC) of ANSI 304 austenitic stainless steel
J. Z. Lu et al.
CORROSION SCIENCE (2012)
Molecular Structure of 3-Aminopropyltriethoxysilane Layers Formed on Silanol-Terminated Silicon Surfaces
Robert G. Acres et al.
JOURNAL OF PHYSICAL CHEMISTRY C (2012)
Review on storage materials and thermal performance enhancement techniques for high temperature phase change thermal storage systems
Ming Liu et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2012)
Carburization behavior of AISI 316LN austenitic stainless steel - Experimental studies and modeling
C. Sudha et al.
JOURNAL OF NUCLEAR MATERIALS (2010)
High-temperature phase change materials for thermal energy storage
Murat M. Kenisarin
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2010)
Detection of Sigma Phase in 22% Cr Duplex Stainless Steel by Electrochemical Methods
S. I. Cristini et al.
RUSSIAN JOURNAL OF ELECTROCHEMISTRY (2010)
Investigation of multiplet splitting of Fe 2p XPS spectra and bonding in iron compounds
AP Grosvenor et al.
SURFACE AND INTERFACE ANALYSIS (2004)
Compatibility of steel No. 1.4970 with liquid sodium at high temperatures
HU Borgstedt
JOURNAL OF NUCLEAR MATERIALS (2003)
Effects of temperature and partial pressure of CO2/O2 on corrosion behaviour of stainless-steel in molten Li/Na carbonate salt
TH Lim et al.
JOURNAL OF POWER SOURCES (2000)