4.8 Article

SiOx Anode: From Fundamental Mechanism toward Industrial Application

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Engineering, Environmental

Carbon dioxide solid-phase embedding reaction of silicon-carbon nanoporous composites for lithium-ion batteries

Zhiwei Yang et al.

Summary: This study prepared an in-situ doped Si/carbon anode material using SiO2 and CO2 as raw materials, achieving nanosizing of silicon and construction of a 3D carbon network, which improved electrical conductivity and cycling performance of the battery. The simple preparation method provides a new idea for modifying silicon-based anode materials, offering valuable insights for further research on carbon doping.

CHEMICAL ENGINEERING JOURNAL (2021)

Article Chemistry, Multidisciplinary

Pre-Lithiating SiO Anodes for Lithium-Ion Batteries by a Simple, Effective, and Controllable Strategy Using Stabilized Lithium Metal Powder

Ben Huang et al.

Summary: The researchers proposed a simple and effective pre-lithiation strategy using SST as a relatively stable pre-lithiation reagent to improve SiO anodes, successfully adjusting ICE to 60-120%. Pre-lithiation is considered as an important way to improve ICE and reduce lithium loss.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2021)

Article Chemistry, Physical

The structural origin of enhanced stability of Na3.32Fe2.11Ca0.23(P2O7)2 cathode for Na-ion batteries

Yumei Liu et al.

Summary: By selectively doping calcium, a sodium-deficient Na3.32Fe2.11Ca0.23(P2O7) (2) cathode with exceptional stability has been prepared. This engineered electrode material shows high reversibility and good structural reversibility, achieving a capacity retention of 81.7% after 1000 cycles at 1 C, which is significantly better than that of the undoped electrode.

NANO ENERGY (2021)

Article Chemistry, Physical

In-Situ Polymerized Binder: A Three-in-One Design Strategy for All-Integrated SiOx Anode with High Mass Loading in Lithium Ion Batteries

Shuxing Wu et al.

Summary: This study introduces a three-in-one design strategy for binder systems in SiOx electrodes, utilizing hard PFA and soft TPU interweaved in a 3D conformation to confine SiOx particles through in-situ polymerization. This collaborative approach results in an areal capacity of 2.4 mAh cm(-2) at a high mass loading of >3.0 mg cm(-2) after 100 cycles, and can be extended to other metal oxides anodes such as Fe2O3 and SnO2, shedding light on the rational design of functional polymer binders for high-areal-capacity electrodes.

ACS ENERGY LETTERS (2021)

Article Chemistry, Multidisciplinary

A Ge/Carbon Atomic-Scale Hybrid Anode Material: A Micro-Nano Gradient Porous Structure with High Cycling Stability

Zhiwei Yang et al.

Summary: By selecting a suitable carbon source and introducing an active medium, Ge/carbon doping at the atom level was achieved, leading to excellent electrochemical performance. The Ge/carbon anode maintained a reversible capacity of 1127 mAh g(-1) after 1000 cycles with a retention of 84% compared to the second cycle, while the SEI thickness was only 17.4 nm after 1000 cycles, reflecting the material's application potential.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2021)

Article Chemistry, Physical

Unlocking multiphysics design guidelines on Si/C composite nanostructures for high-energy-density and robust lithium-ion battery anode

Xiang Gao et al.

Summary: The study established an electro-chemo-mechanical model and found that yolk-shell and dual-shell structures of Si/C composite materials are more robust. The yolk-shell structure was identified as the best in terms of electrochemical performance among the five compared Si/C composites.

NANO ENERGY (2021)

Article Engineering, Chemical

Exposing microstructure evolution of Ni-Rich Ni-Co-Al hydroxide precursor

Lang Qiu et al.

Summary: This study systematically investigated the structural evolution of Ni-rich Ni-Co-Al hydroxide precursor under different synthesis conditions, revealing the impact of pH on ammonia concentration, particle size, composition, and space group of the precursor. The results provide significant guidance for the design of a precursor with a specific structure to improve cycle life of high-energy-density cathode materials.

CHEMICAL ENGINEERING SCIENCE (2021)

Article Energy & Fuels

Continuous SO2 absorption and desorption in regenerable flue gas desulfurization with ethylenediamine-phosphoric acid solution: A rate-based dynamic modeling

Jie Zhu et al.

Summary: The study developed a system model for continuous SO2 absorption and desorption processes using amine-based flue gas desulfurization, revealing the dynamic characteristics and parameter evolution mechanism. Results show good agreement between simulation and experimental data, indicating that reducing reboiler duty and adjusting solvent flow can maintain normal desulfurization operation.
Article Chemistry, Physical

A Novel NASICON-Typed Na4VMn0.5Fe0.5(PO4)3 Cathode for High-Performance Na-Ion Batteries

Chunliu Xu et al.

Summary: A novel ternary NASICON-type Na4VMn0.5Fe0.5(PO4)(3)/C cathode is designed with large reversible capacity, high voltage, and good stability. The cathode exhibits excellent rate capacity and cycling durability, outperforming Na4VFe(PO4)(3)/C and Na4VMn(PO4)(3)/C. The synergetic contributions of multimetal ions and facilitated Na+ migration are confirmed, providing new perspectives for high-performance Na-ion batteries.

ADVANCED ENERGY MATERIALS (2021)

Review Chemistry, Multidisciplinary

Progress in the sustainable recycling of spent lithium-ion batteries

Min Fan et al.

Summary: The article summarizes the recent progress of recycling spent LIBs, especially focusing on green innovations. The sustainability of the recycling process has become an important factor in the field.

SUSMAT (2021)

Review Chemistry, Multidisciplinary

Hard carbon for sodium storage: mechanism and optimization strategies toward commercialization

Dequan Chen et al.

Summary: Sodium-ion batteries have potential in grid-scale energy storage, with hard carbon as a promising anode material for commercialization, requiring in-depth understanding of storage mechanism and performance optimization. Future research and commercialization efforts can focus on increasing specific capacity, optimizing rate performance, and enhancing initial coulombic efficiency.

ENERGY & ENVIRONMENTAL SCIENCE (2021)

Article Chemistry, Multidisciplinary

Demystifying the catalysis in lithium-sulfur batteries: Characterization methods and techniques

Chuannan Geng et al.

Summary: This review provides a comprehensive overview of characterization techniques on the catalyst in lithium-sulfur batteries, emphasizing their significance and calling for more efforts in developing precise and fast techniques. Future developments are envisioned for a better understanding of catalysis towards practical lithium-sulfur batteries.

SUSMAT (2021)

Article Chemistry, Multidisciplinary

Electrolyte and anode-electrolyte interphase in solid-state lithium metal polymer batteries: A perspective

Heng Zhang et al.

Summary: The interest in solid-state lithium metal batteries, utilizing solid polymer electrolytes, has been growing due to their higher energy density and improved safety. Research focuses on improving the ionic conductivity of SPEs and their interface stability with lithium anodes, as well as exploring advanced characterizing techniques for in-depth understanding of the battery interphases.

SUSMAT (2021)

Article Chemistry, Multidisciplinary

Deciphering an Abnormal Layered-Tunnel Heterostructure Induced by Chemical Substitution for the Sodium Oxide Cathode

Yao Xiao et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2020)

Review Chemistry, Multidisciplinary

Exploring Anomalous Charge Storage in Anode Materials for Next-Generation Li Rechargeable Batteries

Hyunwoo Kim et al.

CHEMICAL REVIEWS (2020)

Article Chemistry, Multidisciplinary

Molecularly Tailored Lithium-Arene Complex Enables Chemical Prelithiation of High-Capacity Lithium-Ion Battery Anodes

Juyoung Jang et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2020)

Article Engineering, Environmental

Enhanced sodium storage property of sodium vanadium phosphate via simultaneous carbon coating and Nb5+ doping

Xiaohong Liu et al.

CHEMICAL ENGINEERING JOURNAL (2020)

Review Chemistry, Multidisciplinary

Towards practical lithium-metal anodes

Xin Zhang et al.

CHEMICAL SOCIETY REVIEWS (2020)

Article Chemistry, Physical

A Stable Layered Oxide Cathode Material for High-Performance Sodium-Ion Battery

Yao Xiao et al.

ADVANCED ENERGY MATERIALS (2019)

Article Nanoscience & Nanotechnology

High-Performance Lithiated SiOx Anode Obtained by a Controllable and Efficient Prelithiation Strategy

Qinghai Meng et al.

ACS APPLIED MATERIALS & INTERFACES (2019)

Review Materials Science, Multidisciplinary

A review of rechargeable batteries for portable electronic devices

Yeru Liang et al.

INFOMAT (2019)

Review Chemistry, Multidisciplinary

Silicon oxides: a promising family of anode materials for lithium-ion batteries

Zhenhui Liu et al.

CHEMICAL SOCIETY REVIEWS (2019)

Review Chemistry, Physical

Li-free Cathode Materials for High Energy Density Lithium Batteries

Liping Wang et al.

Review Chemistry, Physical

The Challenge of Lithium Metal Anodes for Practical Applications

Yuqing Chen et al.

SMALL METHODS (2019)

Article Engineering, Environmental

Creating graphene-like carbon layers on SiO anodes via a layer-by-layer strategy for lithium-ion battery

Jinlong Han et al.

CHEMICAL ENGINEERING JOURNAL (2018)

Review Engineering, Environmental

A review on anode for lithium-sulfur batteries: Progress and prospects

Huijuan Zhao et al.

CHEMICAL ENGINEERING JOURNAL (2018)

Article Engineering, Environmental

Core-shell SiO@F-doped C composites with interspaces and voids as anodes for high-performance lithium-ion batteries

Lingzhi Guo et al.

CHEMICAL ENGINEERING JOURNAL (2018)

Article Chemistry, Multidisciplinary

Vertical Graphene Growth on SiO Microparticles for Stable Lithium Ion Battery Anodes

Liurong Shi et al.

NANO LETTERS (2017)

Review Nanoscience & Nanotechnology

Reviving the lithium metal anode for high-energy batteries

Dingchang Lin et al.

NATURE NANOTECHNOLOGY (2017)

Article Multidisciplinary Sciences

Three-dimensional stable lithium metal anode with nanoscale lithium islands embedded in ionically conductive solid matrix

Dingchang Lin et al.

PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2017)

Article Electrochemistry

A SiOx-Based Anode in a High-Voltage Lithium-Ion Battery

Giuseppe Antonio Elia et al.

CHEMELECTROCHEM (2017)

Review Chemistry, Physical

Lithium sulfur and lithium oxygen batteries: new frontiers of sustainable energy storage

Lorenzo Carbone et al.

SUSTAINABLE ENERGY & FUELS (2017)

Article Chemistry, Multidisciplinary

Generalized Synthesis of Metal Oxide Nanosheets and Their Application as Li-Ion Battery Anodes

Ayman A. AbdelHamid et al.

ADVANCED MATERIALS (2017)

Review Chemistry, Multidisciplinary

Toward Safe Lithium Metal Anode in Rechargeable Batteries: A Review

Xin-Bing Cheng et al.

CHEMICAL REVIEWS (2017)

Article Chemistry, Physical

Atomic-Level Understanding toward a High-Capacity and High Power Silicon Oxide (SiO) Material

Sung Chul Jung et al.

JOURNAL OF PHYSICAL CHEMISTRY C (2016)

Article Nanoscience & Nanotechnology

Layered reduced graphene oxide with nanoscale interlayer gaps as a stable host for lithium metal anodes

Dingchang Lin et al.

NATURE NANOTECHNOLOGY (2016)

Article Multidisciplinary Sciences

Atomic-scale disproportionation in amorphous silicon monoxide

Akihiko Hirata et al.

NATURE COMMUNICATIONS (2016)

Article Electrochemistry

The Stability of Carbonaceous Electrodes in Ether Based Electrolyte Solutions for Advanced Li Batteries

D. Hirshberg et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2015)

Article Materials Science, Multidisciplinary

Li-ion battery materials: present and future

Naoki Nitta et al.

MATERIALS TODAY (2015)

Article Chemistry, Physical

Electrochemical in situ investigations of SEI and dendrite formation on the lithium metal anode

Georg Bieker et al.

PHYSICAL CHEMISTRY CHEMICAL PHYSICS (2015)

Article Multidisciplinary Sciences

High rate and stable cycling of lithium metal anode

Jiangfeng Qian et al.

NATURE COMMUNICATIONS (2015)

Article Chemistry, Physical

Reversible Storage of Lithium in Three-Dimensional Macroporous Germanium

Haiping Jia et al.

CHEMISTRY OF MATERIALS (2014)

Review Chemistry, Multidisciplinary

Lithium metal anodes for rechargeable batteries

Wu Xu et al.

ENERGY & ENVIRONMENTAL SCIENCE (2014)

Article Chemistry, Multidisciplinary

Silicon Monoxide at 1 atm and Elevated Pressures: Crystalline or Amorphous?

Khalid AlKaabi et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2014)

Article Chemistry, Physical

Detection of subsurface structures underneath dendrites formed on cycled lithium metal electrodes

Katherine J. Harry et al.

NATURE MATERIALS (2014)

News Item Multidisciplinary Sciences

Tanks for the Batteries

Robert F. Service

SCIENCE (2014)

Review Chemistry, Multidisciplinary

Understanding Li Diffusion in Li-Intercalation Compounds

Anton Van der Ven et al.

ACCOUNTS OF CHEMICAL RESEARCH (2013)

Article Chemistry, Physical

Reduction effect of irreversible capacity on SiO anode material heat-reacted with Fe2O3

H. Yamamura et al.

JOURNAL OF POWER SOURCES (2013)

Article Chemistry, Physical

Modified SiO as a high performance anode for Li-ion batteries

Yoon Hwa et al.

JOURNAL OF POWER SOURCES (2013)

Article Electrochemistry

Low-cost SiO-based anode using green binders for lithium ion batteries

Xuejiao Feng et al.

JOURNAL OF SOLID STATE ELECTROCHEMISTRY (2013)

Article Chemistry, Multidisciplinary

SBR-PVDF based binder for the application of SLMP in graphite anodes

Lei Wang et al.

RSC ADVANCES (2013)

Article Chemistry, Physical

Reaction mechanism and enhancement of cyclability of SiO anodes by surface etching with NaOH for Li-ion batteries

Byeong-Chul Yu et al.

JOURNAL OF MATERIALS CHEMISTRY A (2013)

Article Chemistry, Multidisciplinary

Nano-Structured Phosphorus Composite as High-Capacity Anode Materials for Lithium Batteries

Li Wang et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2012)

Article Chemistry, Physical

Conversion of Hydroperoxoantimonate Coated Graphenes to Sb2S3@Graphene for a Superior Lithium Battery Anode

Petr V. Prikhodchenko et al.

CHEMISTRY OF MATERIALS (2012)

Article Chemistry, Multidisciplinary

Improving the Electrode Performance of Ge through Ge@C Core-Shell Nanoparticles and Graphene Networks

Ding-Jiang Xue et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2012)

Article Chemistry, Multidisciplinary

Direct Calculation of Li-Ion Transport in the Solid Electrolyte Interphase

Siqi Shi et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2012)

Article Chemistry, Physical

7Li MRI of Li batteries reveals location of microstructural lithium

S. Chandrashekar et al.

NATURE MATERIALS (2012)

Article Multidisciplinary Sciences

A high-rate and long cycle life aqueous electrolyte battery for grid-scale energy storage

Mauro Pasta et al.

NATURE COMMUNICATIONS (2012)

Review Chemistry, Multidisciplinary

Nanostructured silicon for high capacity lithium battery anodes

Jeannine R. Szczech et al.

ENERGY & ENVIRONMENTAL SCIENCE (2011)

Article Chemistry, Physical

Study on Polymer Binders for High-Capacity SiO Negative Electrode of Li-Ion Batteries

Shinichi Komaba et al.

JOURNAL OF PHYSICAL CHEMISTRY C (2011)

Review Chemistry, Multidisciplinary

Li-alloy based anode materials for Li secondary batteries

Cheol-Min Park et al.

CHEMICAL SOCIETY REVIEWS (2010)

Article Chemistry, Physical

Porous Si anode materials for lithium rechargeable batteries

Jaephil Cho

JOURNAL OF MATERIALS CHEMISTRY (2010)

Article Chemistry, Physical

Influence of Nonaqueous Solvents on the Electrochemistry of Oxygen in the Rechargeable Lithium-Air Battery

Cormac O. Laoire et al.

JOURNAL OF PHYSICAL CHEMISTRY C (2010)

Article Chemistry, Physical

Electrochemical behavior of a silicon monoxide and Li-powder double layer anode cell

Il Won Seong et al.

JOURNAL OF POWER SOURCES (2010)

Article Electrochemistry

Threefold Increase in the Young's Modulus of Graphite Negative Electrode during Lithium Intercalation

Yue Qi et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2010)

Article Chemistry, Physical

In situ NMR observation of the formation of metallic lithium microstructures in lithium batteries

Rangeet Bhattacharyya et al.

NATURE MATERIALS (2010)

Article Chemistry, Physical

Electrochemical behavior of a lithium-pre-doped carbon-coated silicon monoxide anode cell

Il Won Seong et al.

JOURNAL OF POWER SOURCES (2009)

Article Chemistry, Multidisciplinary

Silicon Nanotube Battery Anodes

Mi-Hee Park et al.

NANO LETTERS (2009)

Article Chemistry, Multidisciplinary

Three-Dimensional Porous Silicon Particles for Use in High-Performance Lithium Secondary Batteries

Hyunjung Kim et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2008)

Article Chemistry, Multidisciplinary

High capacity Li ion battery anodes using Ge nanowires

Candace K. Chan et al.

NANO LETTERS (2008)

Article Multidisciplinary Sciences

Building better batteries

M. Armand et al.

NATURE (2008)

Article Chemistry, Physical

Enhanced cycle performance of SiO-C composite anode for lithium-ion batteries

Jae-Hun Kim et al.

JOURNAL OF POWER SOURCES (2007)

Article Electrochemistry

An in situ X-ray diffraction study of the reaction of Li with crystalline Si

Jing Li et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2007)

Article Electrochemistry

Solid-state NMR and electrochemical dilatometry study on Li+ uptake/extraction mechanism in SiO electrode

Taeahn Kim et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2007)

Review Chemistry, Physical

Nano- and bulk-silicon-based insertion anodes for lithium-ion secondary cells

Uday Kasavajjula et al.

JOURNAL OF POWER SOURCES (2007)

Article Electrochemistry

Nano Si cluster-SiOx-C composite material as high-capacity anode material for rechargeable lithium batteries

T Morita et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2006)

Article Electrochemistry

Analysis of SiO anodes for lithium-ion batteries

M Miyachi et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2005)

Review Materials Science, Ceramics

Thermodynamics and phase stability in the Si-O system

SM Schnurre et al.

JOURNAL OF NON-CRYSTALLINE SOLIDS (2004)

Review Chemistry, Multidisciplinary

NMR studies of cathode materials for lithium-ion rechargeable batteries

CP Grey et al.

CHEMICAL REVIEWS (2004)

Article Electrochemistry

Structural changes in silicon anodes during lithium insertion/extraction

MN Obrovac et al.

ELECTROCHEMICAL AND SOLID STATE LETTERS (2004)

Article Electrochemistry

Structural analysis of pure and electrochemically lithiated SiO using neutron elastic scattering

Y Nagao et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2004)

Article Electrochemistry

In situ XRD and electrochemical study of the reaction of lithium with amorphous silicon

TD Hatchard et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2004)

Review Chemistry, Multidisciplinary

Lithium batteries and cathode materials

MS Whittingham

CHEMICAL REVIEWS (2004)

Article Materials Science, Ceramics

TEM investigation on the structure of amorphous silicon monoxide

K Schulmeister et al.

JOURNAL OF NON-CRYSTALLINE SOLIDS (2003)

Review Materials Science, Ceramics

An interface clusters mixture model for the structure of amorphous silicon monoxide (SiO)

A Hohl et al.

JOURNAL OF NON-CRYSTALLINE SOLIDS (2003)

Article Chemistry, Multidisciplinary

Synthesis of tin-encapsulated spherical hollow carbon for anode material in lithium secondary batteries

KT Lee et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2003)

Article Chemistry, Physical

SiOx-based anodes for secondary lithium batteries

J Yang et al.

SOLID STATE IONICS (2002)

Article Electrochemistry

Staging phase transitions in LixCoO2

ZH Chen et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2002)

Article Chemistry, Physical

Lithium diffusion mechanisms in layered intercalation compounds

A Van der Ven et al.

JOURNAL OF POWER SOURCES (2001)

Article Electrochemistry

Anode properties of amorphous 50SiO•50SnO powders synthesized by mechanical milling

H Morimoto et al.

ELECTROCHEMICAL AND SOLID STATE LETTERS (2001)

Article Electrochemistry

Lithium diffusion in layered LixCoO2

A Van der Ven et al.

ELECTROCHEMICAL AND SOLID STATE LETTERS (2000)