相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。Direct Ink Writing of Mineral Materials: A review
Liang Hao et al.
INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING-GREEN TECHNOLOGY (2021)
Limpet Tooth-Inspired Painless Microneedles Fabricated by Magnetic Field-Assisted 3D Printing
Xiangjia Li et al.
ADVANCED FUNCTIONAL MATERIALS (2021)
In fl uence of sub-monolayer quantities of carbon nanoparticles on the melting and crystallization behavior of polyamide 12 powders for additive manufacturing
Alexander Sommereyns et al.
MATERIALS & DESIGN (2021)
Hierarchically Structured Composite Fibers for Real Nanoscale Manipulation of Carbon Nanotubes
Weiheng Xu et al.
ADVANCED FUNCTIONAL MATERIALS (2021)
3D Particle-Free Printing of Biocompatible Conductive Hydrogel Platforms for Neuron Growth and Electrophysiological Recording
Chen Wang et al.
ADVANCED FUNCTIONAL MATERIALS (2021)
The effect of interfacial resistance and crystallinity on heat transfer mechanism in carbon nanotube reinforced polyethylene
Georgios Konstantopoulos et al.
MATERIALS & DESIGN (2021)
Controlled self-assembly of plasmon-based photonic nanocrystals for high performance photonic technologies
Ashish Yadav et al.
NANO TODAY (2021)
A gill-mimicking thermoelectric generator (TEG) for waste heat recovery and self-powering wearable devices
Yuxiang Zhu et al.
JOURNAL OF MATERIALS CHEMISTRY A (2021)
Process-Structure-Properties in Polymer Additive Manufacturing via Material Extrusion: A Review
G. D. Goh et al.
CRITICAL REVIEWS IN SOLID STATE AND MATERIALS SCIENCES (2020)
An artificial immune and incremental learning inspired novel framework for performance pattern identification of complex electromechanical systems
RongXi Wang et al.
SCIENCE CHINA-TECHNOLOGICAL SCIENCES (2020)
3D printing of electrically conductive hydrogels for tissue engineering and biosensors - A review
Thomas Distler et al.
ACTA BIOMATERIALIA (2020)
Micro-/Nanostructured Interface for Liquid Manipulation and Its Applications
Yinxiu Zuo et al.
SMALL (2020)
3D Printing in Medicine for Preoperative Surgical Planning: A Review
A. Tejo-Otero et al.
ANNALS OF BIOMEDICAL ENGINEERING (2020)
Stimuli induced cellulose nanomaterials alignment and its emerging applications: A review
Qianqian Zhu et al.
CARBOHYDRATE POLYMERS (2020)
Rheological Considerations for Binder Development in Direct Ink Writing of Energetic Materials
Hannah Woods et al.
PROPELLANTS EXPLOSIVES PYROTECHNICS (2020)
Materials as Machines
Joselle M. McCracken et al.
ADVANCED MATERIALS (2020)
3D Printed Microfluidics
Anna V. Nielsen et al.
ANNUAL REVIEW OF ANALYTICAL CHEMISTRY, VOL 13 (2020)
High thermal conductive epoxy based composites fabricated by multi-material direct ink writing
Junchao Liu et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2020)
Quantifying macro- and microscale alignment of carbon microfibers in polymer-matrix composite materials fabricated using ultrasound directed self-assembly and 3D-printing
K. Niendorf et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2020)
Mechanical behaviour of 3D printed composite parts with short carbon fiber reinforcements
M. Somireddy et al.
ENGINEERING FAILURE ANALYSIS (2020)
A review on computer-aided design and manufacturing of patient-specific maxillofacial implants
Afaque Rafique Memon et al.
EXPERT REVIEW OF MEDICAL DEVICES (2020)
Preferred orientation of chopped fibers in polymer-based composites processed by selective laser sintering and fused deposition modeling: Effects on mechanical properties
Claudio Badini et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2020)
Photoinduced Proton-Transfer Polymerization: A Practical Synthetic Tool for Soft Lithography Applications
Hyunki Yeo et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2020)
High thermal conductivity polylactic acid composite for 3D printing: Synergistic effect of graphene and alumina
Jun Jiang et al.
POLYMERS FOR ADVANCED TECHNOLOGIES (2020)
3D Printing of Polyethylene Terephthalate Glycol-Sepiolite Composites with Nanoscale Orientation
Hoon Kim et al.
ACS APPLIED MATERIALS & INTERFACES (2020)
A Review of 3D Printing Technologies for Soft Polymer Materials
Lu-Yu Zhou et al.
ADVANCED FUNCTIONAL MATERIALS (2020)
4D Printing of Hydrogels: A Review
Mathilde Champeau et al.
ADVANCED FUNCTIONAL MATERIALS (2020)
Differential effect of magnetic alignment on additive manufacturing of magnetocaloric particles
Karam N. Al-Milaji et al.
AIP ADVANCES (2020)
Dendritic Nanostructured Waste Copper Wires for High-Energy Alkaline Battery
Nilesh R. Chodankar et al.
NANO-MICRO LETTERS (2020)
Polymer composites with enhanced thermal conductivity via oriented boron nitride and alumina hybrid fillers assisted by 3-D printing
Mengjing Liu et al.
CERAMICS INTERNATIONAL (2020)
Movable cross-linked elastomer with aligned carbon nanotube/nanofiber as high thermally conductive tough flexible composite
Taku Goto et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2020)
Direct Patterning and Spontaneous Self-Assembly of Graphene Oxide via Electrohydrodynamic Jet Printing for Energy Storage and Sensing
Bin Zhang et al.
MICROMACHINES (2020)
Spontaneous Alignment of Graphene Oxide in Hydrogel during 3D Printing for Multistimuli-Responsive Actuation
Mingchao Zhang et al.
ADVANCED SCIENCE (2020)
3D printing by fused deposition modeling of single- and multi-compartment hollow systems for oral delivery - A review
Alice Melocchi et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2020)
Manufacturing bioinspired flexible materials using ultrasound directed self-assembly and 3D printing
Paul Wadsworth et al.
MATERIALS & DESIGN (2020)
Enhanced thermal conductivity of alumina and carbon fibre filled composites by 3-D printing
Jiacheng Ji et al.
THERMOCHIMICA ACTA (2020)
Scalable Alignment and Selective Deposition of Nanoparticles for Multifunctional Sensor Applications
Sayli Jambhulkar et al.
NANO LETTERS (2020)
3D printing of clay for decorative architectural applications: Effect of solids volume fraction on rheology and printability
Shareen S. L. Chan et al.
ADDITIVE MANUFACTURING (2020)
Weak polyelectrolyte-based multilayers via layer-by-layer assembly: Approaches, properties, and applications
Weiyong Yuan et al.
ADVANCES IN COLLOID AND INTERFACE SCIENCE (2020)
A smoothed particle hydrodynamics study of a non-isothermal and thermally anisotropic fused deposition modeling process for a fiber-filled composite
Zhenyu Ouyang et al.
PHYSICS OF FLUIDS (2020)
Additive-manufactured (3D-printed) electrochemical sensors: A critical review
Rafael M. Cardoso et al.
ANALYTICA CHIMICA ACTA (2020)
Uniaxially stretched polyethylene/boron nitride nanocomposite films with metal-like thermal conductivity
Ri-Chao Zhang et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2020)
In-situ X-ray scattering study of isotactic polypropylene/graphene nanocomposites under shear during fused deposition modeling 3D printing
Yuval Shmueli et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2020)
Arranging Ellipsoidal Particles in Three-Dimensional User-Specified Orientations with Ultrasound-Directed Self-Assembly
M. Prisbrey et al.
PHYSICAL REVIEW APPLIED (2020)
Direct Ink Writing Based 4D Printing of Materials and Their Applications
Xue Wan et al.
ADVANCED SCIENCE (2020)
3D printing: Principles and pharmaceutical applications of selective laser sintering
Atheer Awad et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2020)
Bioinspired, Mechanically Robust Chemiresistor for Inline Volatile Organic Compounds Sensing
Weiheng Xu et al.
ADVANCED MATERIALS TECHNOLOGIES (2020)
Direct ink writing of hierarchical porous alumina-stabilized emulsions: Rheology and printability
Shareen S. L. Chan et al.
JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2020)
Prediction of mechanical properties of fused filament fabricated structures via asymptotic homogenization
Aslan Nasirov et al.
MECHANICS OF MATERIALS (2020)
FDM-Based 3D Printing of Polymer and Associated Composite: A Review on Mechanical Properties, Defects and Treatments
Sachini Wickramasinghe et al.
POLYMERS (2020)
Bioinspired composites reinforced with ordered steel fibers produced via a magnetically assisted 3D printing process
Yunhai Ma et al.
JOURNAL OF MATERIALS SCIENCE (2020)
A Review of Inkjet Printed Graphene and Carbon Nanotubes Based Gas Sensors
Twinkle Pandhi et al.
SENSORS (2020)
A review of 3D and 4D printing of natural fibre biocomposites
Antoine Le Duigou et al.
MATERIALS & DESIGN (2020)
A Review of Stereolithography: Processes and Systems
Jigang Huang et al.
PROCESSES (2020)
Polymer-inorganic hybrid colloids for ultraviolet-assisted direct ink write of polymer nanocomposites
Philip J. Scott et al.
ADDITIVE MANUFACTURING (2020)
Facile and scalable fabrication of highly thermal conductive polyethylene/graphene nanocomposites by combining solid-state shear milling and FDM 3D-printing aligning methods
Jingjing Jing et al.
CHEMICAL ENGINEERING JOURNAL (2020)
Enabling future nanomanufacturing through block copolymer self-assembly: A review
Cian Cummins et al.
NANO TODAY (2020)
Direct ink writing of ceramics for bio medical applications - A Review
Utsav Golcha et al.
3RD INTERNATIONAL CONFERENCE ON ADVANCES IN MECHANICAL ENGINEERING (ICAME 2020), PTS 1-6 (2020)
Recent Progress in Cellulose Nanocrystal Alignment and Its Applications
Ragesh Prathapan et al.
ACS APPLIED BIO MATERIALS (2020)
3D printing of carbon black/polypropylene composites with excellent microwave absorption performance
Lei Lei et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2020)
Engineering materials with light: recent progress in digital light processing based 3D printing
Zhi Zhao et al.
JOURNAL OF MATERIALS CHEMISTRY C (2020)
Direct Embedment and Alignment of Silver Nanowires by Inkjet Printing for Stretchable Conductors
Karam Nashwan Al-Milaji et al.
ACS APPLIED ELECTRONIC MATERIALS (2020)
Functional inks and extrusion-based 3D printing of 2D materials: a review of current research and applications
Kamrul Hassan et al.
NANOSCALE (2020)
Polymer-guided assembly of inorganic nanoparticles
Chenglin Yi et al.
CHEMICAL SOCIETY REVIEWS (2020)
Integrating 3D printing and self-assembly for layered polymer/nanoparticle microstructures as high-performance sensors
Sayli Jambhulkar et al.
JOURNAL OF MATERIALS CHEMISTRY C (2020)
Projection micro stereolithography based 3D printing and its applications
Qi Ge et al.
INTERNATIONAL JOURNAL OF EXTREME MANUFACTURING (2020)
3D Assembly of Graphene Nanomaterials for Advanced Electronics
Hortense Le Ferrand et al.
ADVANCED INTELLIGENT SYSTEMS (2020)
In-plane aligned assemblies of 1D-nanoobjects: recent approaches and applications
Hebing Hu et al.
CHEMICAL SOCIETY REVIEWS (2020)
Castable and Printable Dielectric Composites Exhibiting High Thermal Conductivity via Percolation-Enabled Phonon Transport
Anvesh Gurijala et al.
MATTER (2020)
3D printing of bioinspired textured surfaces with superamphiphobicity
Changyou Yan et al.
NANOSCALE (2020)
Recent advances in amphiphilic block copolymer templated mesoporous metal-based materials: assembly engineering and applications
Yidong Zou et al.
CHEMICAL SOCIETY REVIEWS (2020)
High-Yield Production of Aqueous Graphene for Electrohydrodynamic Drop-on-Demand Printing of Biocompatible Conductive Patterns
Amir Ehsan Niaraki Asli et al.
BIOSENSORS-BASEL (2020)
Review-Inkjet Printing of Metal Structures for Electrochemical Sensor Applications
Yongkun Sui et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2020)
3D and 4D printing for optics and metaphotonics
Hoon Yeub Jeong et al.
NANOPHOTONICS (2020)
Modular 4D Printing via Interfacial Welding of Digital Light-Controllable Dynamic Covalent Polymer Networks
Zizheng Fang et al.
MATTER (2020)
Layer-by-Layer Assembly of Two-Dimensional Materials: Meticulous Control on the Nanoscale
Jason Lipton et al.
MATTER (2020)
Optimization of mechanical properties of glass-spheres-filled polypropylene composites for extrusion-based additive manufacturing
Martin Spoerk et al.
POLYMER COMPOSITES (2019)
Preparation of high solid loading and low viscosity ceramic slurries for photopolymerization-based 3D printing
Zhangwei Chen et al.
CERAMICS INTERNATIONAL (2019)
Halloysite nanotubes coated 3D printed PLA pattern for guiding human mesenchymal stem cells (hMSCs) orientation
Fan Wu et al.
CHEMICAL ENGINEERING JOURNAL (2019)
Metal 3D printing in construction: A review of methods, research, applications, opportunities and challenges
C. Buchanan et al.
ENGINEERING STRUCTURES (2019)
A critical review of fused deposition modeling 3D printing technology in manufacturing polylactic acid parts
Zengguang Liu et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2019)
3D printed nozzles on a silicon fluidic chip
Sven Bohne et al.
REVIEW OF SCIENTIFIC INSTRUMENTS (2019)
Metallic Nanoparticle Inks for 3D Printing of Electronics
Hong Wei Tan et al.
ADVANCED ELECTRONIC MATERIALS (2019)
Bioinspired Functional Surfaces Enabled by Multiscale Stereolithography
Yuanrui Li et al.
ADVANCED MATERIALS TECHNOLOGIES (2019)
Highly Thermally Conducting Polymer-Based Films with Magnetic Field-Assisted Vertically Aligned Hexagonal Boron Nitride for Flexible Electronic Encapsulation
Jie Yuan et al.
ACS APPLIED MATERIALS & INTERFACES (2019)
Improved thermal conductivity of thermoplastic polyurethane via aligned boron nitride platelets assisted by 3D printing
Junchao Liu et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2019)
Failure analysis of AA8011-pultruded GFRP adhesively bonded similar and dissimilar joints
Nithin Simha Reddy et al.
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2019)
Enhancing Printing Resolution on Hydrophobic Polymer Surfaces Using Patterned Coatings of Cellulose Nanocrystals
Ragesh Prathapan et al.
LANGMUIR (2019)
Recent Developments in Fused Deposition Modeling-Based 3D Printing of Polymers and Their Composites
Tuan Noraihan Azila Tuan Rahim et al.
POLYMER REVIEWS (2019)
3D printing of hybrid MoS2-graphene aerogels as highly porous electrode materials for sodium ion battery anodes
Emery Brown et al.
MATERIALS & DESIGN (2019)
Electrically assisted 3D printing of nacre-inspired structures with self-sensing capability
Yang Yang et al.
SCIENCE ADVANCES (2019)
In Situ Magnetic Alignment and Cross-Linking of Injectable Microparticles into Centimeter-Scale Fibers for Efficient Myoblast Alignment and in Vivo Fiber Formation
Seung Woo Choi et al.
CHEMISTRY OF MATERIALS (2019)
A Textile Platform Using Continuous Aligned and Textured Composite Microfibers to Engineer Tendon-to-Bone Interface Gradient Scaffolds
Isabel Calejo et al.
ADVANCED HEALTHCARE MATERIALS (2019)
FDM 3D Printing of Polymers Containing Natural Fillers: A Review of their Mechanical Properties
Valentina Mazzanti et al.
POLYMERS (2019)
Aligning High-Aspect-Ratio Particles in User-Specified Orientations with Ultrasound-Directed Self-Assembly
M. Prisbrey et al.
PHYSICAL REVIEW APPLIED (2019)
Balance thermal conductivity and thermal expansion in RGO/Cu composites through alignment engineering
Yuemao Liu et al.
MATERIALS RESEARCH EXPRESS (2019)
Manipulating magnetic anisotropy in fused filament fabricated parts via macroscopic shape, mesoscopic infill orientation, and infill percentage
Michael Patton et al.
ADDITIVE MANUFACTURING (2019)
Exploring thermal annealing and graphene-carbon nanotube additives to enhance crystallinity, thermal, electrical and tensile properties of aged poly (lactic) acid-based filament for 3D printing
Rumiana Kotsilkova et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2019)
3D printing of carbon nanotubes reinforced thermoplastic polyimide composites with controllable mechanical and electrical performance
Wenli Ye et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2019)
Self-Assembly of Nanoparticles in 2D and 3D: Recent Advances and Future Trends
Sujit Kumar Ghosh et al.
MACROMOLECULAR CHEMISTRY AND PHYSICS (2019)
Large-area and transparent antifogging polymeric coatings via highly efficient and facile layer-by-layer assembly
Jianfu Zhang et al.
POLYMER TESTING (2019)
Classification of challenges in 3D printing for combined electrochemical and microfluidic applications: a review
A. Arivarasi et al.
RAPID PROTOTYPING JOURNAL (2019)
CVD Synthesis, Functionalization and CO2 Adsorption Attributes of Multiwalled Carbon Nanotubes
Shazia Shukrullah et al.
PROCESSES (2019)
Surface Instability of Composite Thin Films on Compliant Substrates: Direct Simulation Approach
Siavash Nikravesh et al.
FRONTIERS IN MATERIALS (2019)
General, Vertical, Three-Dimensional Printing of Two-Dimensional Materials with Multiscale Alignment
Zhiqiang Liang et al.
ACS NANO (2019)
High-throughput screening of printed carbon nanotube circuits using radio frequency heating
Victoria K. Hicks et al.
CARBON (2019)
3D electrohydrodynamic printing of highly aligned dual-core graphene composite matrices
Baolin Wang et al.
CARBON (2019)
3D-printed polymer composites with acoustically assembled multidimensional filler networks for accelerated heat dissipation
Lu Lu et al.
COMPOSITES PART B-ENGINEERING (2019)
Extrusion and rheology characterization of geopolymer nanocomposites used in 3D printing
Biranchi Panda et al.
COMPOSITES PART B-ENGINEERING (2019)
Impact of nanosilica on the friction and wear of a PEEK/CF composite coating manufactured by fused deposition modeling (FDM)
Leyu Lin et al.
COMPOSITES PART B-ENGINEERING (2019)
3D SiC containing uniformly dispersed, aligned SiC whiskers: Printability, microstructure and mechanical properties
Huiwen Xiong et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2019)
Fabricating Fibers of a Porous-Polystyrene Shell and Particle-Loaded Core
Dharneedar Ravichandran et al.
MOLECULES (2019)
Electrohydrodynamic (EHD) jet printing of carbon-black composites for solution-processed organic field-effect transistors
Xinlin Li et al.
ORGANIC ELECTRONICS (2019)
3D Printing of Ultrahigh Strength Continuous Carbon Fiber Composites
Pedram Parandoush et al.
ADVANCED ENGINEERING MATERIALS (2019)
From Atoms to Lives: The Evolution of Nanoparticle Assemblies
Zhenjie Xue et al.
ADVANCED FUNCTIONAL MATERIALS (2019)
Inkjet Printing of Magnetic Particles Toward Anisotropic Magnetic Properties
Karam Nashwan Al-Milaji et al.
SCIENTIFIC REPORTS (2019)
Review of Polymeric Materials in 4D Printing Biomedical Applications
Ming-You Shie et al.
POLYMERS (2019)
Flexible Conductive Composites with Programmed Electrical Anisotropy Using Acoustophoresis
Drew S. Melchert et al.
ADVANCED MATERIALS TECHNOLOGIES (2019)
3D printing and surface imprinting technologies for water treatment: A review
Hammed Abiodun Balogun et al.
JOURNAL OF WATER PROCESS ENGINEERING (2019)
3D printing using plant-derived cellulose and its derivatives: A review
Lei Dai et al.
CARBOHYDRATE POLYMERS (2019)
3D printing of ceramics: A review
Zhangwei Chen et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2019)
Thermal Approaches to Perpendicular Block Copolymer Microdomains in Thin Films: A Review and Appraisal
Hyun Suk Wang et al.
MACROMOLECULAR RAPID COMMUNICATIONS (2019)
Polymer nanocomposites with improved mechanical and thermal properties by magnetically aligned carbon nanotubes
Mingrui Liu et al.
POLYMER (2019)
Nano pattern transfer on acrylic polymers with UV irradiation for liquid crystal alignment
Ju Hwan Lee et al.
POLYMER (2019)
Progress on the layer-by-layer assembly of multilayered polymer composites: Strategy, structural control and applications
Xianlong Zhang et al.
PROGRESS IN POLYMER SCIENCE (2019)
Fabrication of Low-Tortuosity Ultrahigh-Area-Capacity Battery Electrodes through Magnetic Alignment of Emulsion-Based Slurries
Linsen Li et al.
ADVANCED ENERGY MATERIALS (2019)
Roll-to-Roll Manufacturing of Micropatterned Adhesives by Template Compression
Dan Yu et al.
MATERIALS (2019)
Occurrence of the potent mutagens 2-nitrobenzanthrone and 3-nitrobenzanthrone in fine airborne particles
Aldenor G. Santos et al.
SCIENTIFIC REPORTS (2019)
Direct-printed nanoscale metal-oxide-wire electronics
Tae-Sik Kim et al.
NANO ENERGY (2019)
Directed and On-Demand Alignment of Carbon Nanotube: A Review toward 3D Printing of Electronics
Guo Liang Goh et al.
ADVANCED MATERIALS INTERFACES (2019)
Intrinsic and extrinsic control of freeze casting
Isaac Nelson et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2019)
Reversible Self -Healing for Preserving Optical Transparency and Repairing Mechanical Damage in Composites
Kenan Song et al.
ACS APPLIED MATERIALS & INTERFACES (2019)
Fast micron-scale 3D printing with a resonant-scanning two-photon microscope
Benjamin W. Pearre et al.
ADDITIVE MANUFACTURING (2019)
3D printing of polymer-bonded magnets from highly concentrated, plate-like particle suspensions
Alan Shen et al.
MATERIALS & DESIGN (2019)
Stimuli-responsive self-assembly of nanoparticles
Marek Grzelczak et al.
CHEMICAL SOCIETY REVIEWS (2019)
Ink-based 3D printing technologies for graphene-based materials: a review
Jingfeng Wang et al.
ADVANCED COMPOSITES AND HYBRID MATERIALS (2019)
Designs and applications of electrohydrodynamic 3D printing
Dajing Gao et al.
INTERNATIONAL JOURNAL OF BIOPRINTING (2019)
4D printing applications in medical field: A brief review
Mohd Javaid et al.
CLINICAL EPIDEMIOLOGY AND GLOBAL HEALTH (2019)
Sessile droplets containing carbon nanotubes: a study of evaporation dynamics and CNT alignment for printed electronics
Guo Liang Goh et al.
NANOSCALE (2019)
Recent advances in one-dimensional assembly of nanoparticles
Linfeng Chen et al.
CHEMICAL SOCIETY REVIEWS (2019)
Instabilities in dielectric elastomers: buckling, wrinkling, and crumpling
Hareesh Godaba et al.
SOFT MATTER (2019)
Printing Flowers? Custom-Tailored Photonic Cellulose Films with Engineered Surface Topography
Guang Chu et al.
MATTER (2019)
Tensile Performance of Fused Deposition Modeling PA 6 Polymer Composites With Nanoparticle Reinforcement and/or Continuous Fiber Reinforcement
Zhihui Liu et al.
JOURNAL OF MICRO AND NANO-MANUFACTURING (2019)
Tailoring surface patterns to direct the assembly of liquid crystalline materials
Yu Xia et al.
LIQUID CRYSTALS REVIEWS (2019)
In situ alignment of graphene nanoplatelets in poly(vinyl alcohol) nanocomposite fibers with controlled stepwise interfacial exfoliation
Weiheng Xu et al.
NANOSCALE ADVANCES (2019)
Developments in 4D-printing: a review on current smart materials, technologies, and applications
Zhizhou Zhang et al.
INTERNATIONAL JOURNAL OF SMART AND NANO MATERIALS (2019)
A review on inkjet printing of nanoparticle inks for flexible electronics
Laxmidhar Nayak et al.
JOURNAL OF MATERIALS CHEMISTRY C (2019)
Characterization of the anisotropic thermal conductivity of additively manufactured components by fused filament fabrication
Ahmed Elkholy et al.
PROGRESS IN ADDITIVE MANUFACTURING (2019)
Recent Progress of Direct Ink Writing of Electronic Components for Advanced Wearable Devices
Yubai Zhang et al.
ACS APPLIED ELECTRONIC MATERIALS (2019)
Self-assembly as a key player for materials nanoarchitectonics
Katsuhiko Ariga et al.
SCIENCE AND TECHNOLOGY OF ADVANCED MATERIALS (2019)
Functional Polymers and Nanocomposites for 3D Printing of Smart Structures and Devices
Milena Nadgorny et al.
ACS APPLIED MATERIALS & INTERFACES (2018)
Dynamics of Cellulose Nanocrystal Alignment during 3D Printing
Michael K. Hausmann et al.
ACS NANO (2018)
Coding Cell Micropatterns Through Peptide Inkjet Printing for Arbitrary Biomineralized Architectures
Jin Guo et al.
ADVANCED FUNCTIONAL MATERIALS (2018)
3D Printing of Bioinspired Liquid Superrepellent Structures
Xiaojiang Liu et al.
ADVANCED MATERIALS (2018)
Directed Assembly of Hybrid Nanomaterials and Nanocomposites
Shanju Zhang et al.
ADVANCED MATERIALS (2018)
3D Printing of Liquid Crystal Elastomeric Actuators with Spatially Programed Nematic Order
Arda Kotikian et al.
ADVANCED MATERIALS (2018)
3D Printed Functional and Biological Materials on Moving Freeform Surfaces
Zhijie Zhu et al.
ADVANCED MATERIALS (2018)
3D printing of kaolinite clay ceramics using the Direct Ink Writing (DIW) technique
Carlos F. Revelo et al.
CERAMICS INTERNATIONAL (2018)
Low magnetic field-induced alignment of nickel particles in segregated poly (L-lactide)/poly(epsilon-caprolactone)/multi-walled carbon nanotube nanocomposites: Towards remarkable and tunable conductive anisotropy
Yu-Dong Shi et al.
CHEMICAL ENGINEERING JOURNAL (2018)
Elastic properties of 3D printed fibre-reinforced structures
Haider Al Abadi et al.
COMPOSITE STRUCTURES (2018)
Characterization of 3D printed long fibre reinforced composites
J. Justo et al.
COMPOSITE STRUCTURES (2018)
High thermal conductivity and stretchability of layer-by-layer assembled silicone rubber/graphene nanosheets multilayered films
Jianan Song et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2018)
Anisotropic properties of oriented short carbon fibre filled polypropylene parts fabricated by extrusion-based additive manufacturing
Martin Spoerk et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2018)
Interfacial bonding strength of short carbon fiber/acrylonitrile-butadiene-styrene composites fabricated by fused deposition modeling
Wei Zhang et al.
COMPOSITES PART B-ENGINEERING (2018)
Additive manufacturing (3D printing): A review of materials, methods, applications and challenges
Tuan D. Ngo et al.
COMPOSITES PART B-ENGINEERING (2018)
Mechanical properties of PLA-based composites for fused deposition modeling technology
S. M. Lebedev et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2018)
Investigation of the through-plane thermal conductivity of polymer composites with in-plane oriented hexagonal boron nitride
Chen Pan et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2018)
In situ characterization of low-viscosity direct ink writing: Stability, wetting, and rotational flows
Leanne Friedrich et al.
JOURNAL OF COLLOID AND INTERFACE SCIENCE (2018)
3D magnetic printing of bio-inspired composites with tunable mechanical properties
Luquan Ren et al.
JOURNAL OF MATERIALS SCIENCE (2018)
3D printing in orthognathic surgery - A literature review
Hsiu-Hsia Lin et al.
JOURNAL OF THE FORMOSAN MEDICAL ASSOCIATION (2018)
Parallel and Perpendicular Alignment of Anisotropic Particles in Free Liquid Microjets and Emerging Microdroplets
Mathias Schlenk et al.
LANGMUIR (2018)
Polypropylene Filled With Glass Spheres in Extrusion-Based Additive Manufacturing: Effect of Filler Size and Printing Chamber Temperature
Martin Spoerk et al.
MACROMOLECULAR MATERIALS AND ENGINEERING (2018)
Thermal conductivity of polymers and polymer nanocomposites
Congliang Huang et al.
MATERIALS SCIENCE & ENGINEERING R-REPORTS (2018)
Three-Dimensional Printing of Cytocompatible, Thermally Conductive Hexagonal Boron Nitride Nanocomposites
Linda M. Guiney et al.
NANO LETTERS (2018)
3D printed scaffolds with gradient porosity based on a cellulose nanocrystal hydrogel
Sahar Sultan et al.
NANOSCALE (2018)
From equilibrium lamellae to out-of-equilibrium cylinders in triblock copolymer nanolayers obtained via multilayer coextrusion
Juan-Sebastian Montana et al.
POLYMER (2018)
Nanostructuration effect on the mechanical properties of PMMA toughened by a triblock acrylate copolymer using multilayer coextrusion
Juan-Sebastian Montana et al.
POLYMER (2018)
FDM process parameters influence over the mechanical properties of polymer specimens: A review
Diana Popescu et al.
POLYMER TESTING (2018)
Rotational 3D printing of damage-tolerant composites with programmable mechanics
Jordan R. Raney et al.
PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2018)
Anisotropic magnetic nanoparticles: A review of their properties, syntheses and potential applications
Darja Lisjak et al.
PROGRESS IN MATERIALS SCIENCE (2018)
3D printing for soft robotics - a review
Jahan Zeb Gul et al.
SCIENCE AND TECHNOLOGY OF ADVANCED MATERIALS (2018)
Printing 1D Assembly Array of Single Particle Resolution for Magnetosensing
Meng Gao et al.
SMALL (2018)
Review of Carbon Nanomaterials' Synthesis via the Chemical Vapor Deposition (CVD) Method
Yehia M. Manawi et al.
MATERIALS (2018)
Alignment of Boron Nitride Nanofibers in Epoxy Composite Films for Thermal Conductivity and Dielectric Breakdown Strength Improvement
Zhengdong Wang et al.
NANOMATERIALS (2018)
Scaling relationships for acoustic control of two-phase microstructures during direct-write printing
Rachel R. Collino et al.
MATERIALS RESEARCH LETTERS (2018)
Properties of oriented carbon fiber/polyamide 12 composite parts fabricated by fused deposition modeling
Guangxin Liao et al.
MATERIALS & DESIGN (2018)
Characterization of mechanical properties and fracture mode of additively manufactured carbon fiber and glass fiber reinforced thermoplastics
G. D. Goh et al.
MATERIALS & DESIGN (2018)
Acoustic Field-Assisted Particle Patterning for Smart Polymer Composite Fabrication in Stereolithography
Lu Lu et al.
3D PRINTING AND ADDITIVE MANUFACTURING (2018)
The Role of Organic Aerosol in Atmospheric Ice Nucleation: A Review
Daniel A. Knopf et al.
ACS EARTH AND SPACE CHEMISTRY (2018)
Superoleophobic Slippery Lubricant-Infused Surfaces: Combining Two Extremes in the Same Surface
Zheqin Dong et al.
ADVANCED MATERIALS (2018)
Printing ferromagnetic domains for untethered fast-transforming soft materials
Yoonho Kim et al.
NATURE (2018)
Micro 3D Printing of a Temperature-Responsive Hydrogel Using Projection Micro-Stereolithography
Daehoon Han et al.
SCIENTIFIC REPORTS (2018)
Extrusion-Based 3D Printing of Microfluidic Devices for Chemical and Biomedical Applications: A Topical Review
Daniela Pranzo et al.
MICROMACHINES (2018)
Effects of the Nanofillers on Physical Properties of Acrylonitrile-Butadiene-Styrene Nanocomposites: Comparison of Graphene Nanoplatelets and Multiwall Carbon Nanotubes
Sithiprumnea Dul et al.
NANOMATERIALS (2018)
Functional Two- and Three-Dimensional Architectures of Immobilized Metal Nanoparticles
Paul Z. Chen et al.
CHEM (2018)
A Review of 3D Printing Technology for Medical Applications
Qian Yan et al.
ENGINEERING (2018)
Electrohydrodynamic jet-sprayed quantum dots for solution-processed light-emitting-diodes
Tuan Canh Nguyen et al.
OPTICAL MATERIALS EXPRESS (2018)
First Report of Chlamydia abortus in Farmed Fur Animals
Zhaocai Li et al.
BIOMED RESEARCH INTERNATIONAL (2018)
A 3D Self-Shaping Strategy for Nanoresolution Multicomponent Architectures
Meng Su et al.
ADVANCED MATERIALS (2018)
Multi-functional flexible carbon fiber composites with controlled fiber alignment using additive manufacturing
Ali Anwer et al.
ADDITIVE MANUFACTURING (2018)
Characterization of magnetic particle alignment in photosensitive polymer resin: A preliminary study for additive manufacturing processes
Balakrishnan Nagarajan et al.
ADDITIVE MANUFACTURING (2018)
Process-Induced Fiber Orientation in Fused Filament Fabrication
Tom Mulholland et al.
JOURNAL OF COMPOSITES SCIENCE (2018)
3D-Printed Biomimetic Super-Hydrophobic Structure for Microdroplet Manipulation and Oil/Water Separation
Yang Yang et al.
ADVANCED MATERIALS (2018)
Photopolymer formulation to minimize feature size, surface roughness, and stair-stepping in digital light processing-based three-dimensional printing
Kavin Kowsari et al.
ADDITIVE MANUFACTURING (2018)
Additive manufacturing frontier: 3D printing electronics
Bingheng Lu et al.
OPTO-ELECTRONIC ADVANCES (2018)
3D printing of hydrogel composite systems: Recent advances in technology for tissue engineering
Tae-Sik Jang et al.
INTERNATIONAL JOURNAL OF BIOPRINTING (2018)
Development of constitutive material model of 3D printed structure via FDM
Madhukar Somireddy et al.
MATERIALS TODAY COMMUNICATIONS (2018)
High-performance ceramic parts with complex shape prepared by selective laser sintering: a review
An-Nan Chen et al.
ADVANCES IN APPLIED CERAMICS (2018)
An investigation into 3D printing of fibre reinforced thermoplastic composites
L. G. Blok et al.
ADDITIVE MANUFACTURING (2018)
Roll-to-Roll Continuous Manufacturing Multifunctional Nanocomposites by Electric-Field-Assisted Z Direction Alignment of Graphite Flakes in Poly(dimethylsiloxane)
Yuanhao Guo et al.
ACS APPLIED MATERIALS & INTERFACES (2017)
Orientation Control of Graphene Flakes by Magnetic Field: Broad Device Applications of Macroscopically Aligned Graphene
Feng Lin et al.
ADVANCED MATERIALS (2017)
Ultrafast Digital Printing toward 4D Shape Changing Materials
Limei Huang et al.
ADVANCED MATERIALS (2017)
Fused Deposition Technique for Continuous Fiber Reinforced Thermoplastic
Paolo Bettini et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2017)
Instrumented cardiac microphysiological devices via multimaterial three-dimensional printing
Johan U. Lind et al.
NATURE MATERIALS (2017)
Printable Functional Chips Based on Nanoparticle Assembly
Yu Huang et al.
SMALL (2017)
Effects of 3-D Printed Structural Characteristics on Magnetic Properties
Lindsey M. Bollig et al.
IEEE TRANSACTIONS ON MAGNETICS (2017)
Ultrasound directed self-assembly of three-dimensional user-specified patterns of particles in a fluid medium
M. Prisbrey et al.
JOURNAL OF APPLIED PHYSICS (2017)
Thermal and mechanical properties of polyamide 12/graphene nanoplatelets nanocomposites and parts fabricated by fused deposition modeling
Dingchun Zhu et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2017)
Recycling and remanufacturing of 3D printed continuous carbon fiber reinforced PLA composites
Xiaoyong Tian et al.
JOURNAL OF CLEANER PRODUCTION (2017)
Magnetic-Field-Assisted Projection Stereolithography for Three-Dimensional Printing of Smart Structures
Lu Lu et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2017)
Directed self-assembly of three-dimensional user-specified patterns of particles using ultrasound
Milo Prisbrey et al.
JOURNAL OF THE ACOUSTICAL SOCIETY OF AMERICA (2017)
Direct ink writing of ceramic matrix composite structures
Giorgia Franchin et al.
JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2017)
3D Printing of Polymer Nanocomposites via Stereolithography
Jill Z. Manapat et al.
MACROMOLECULAR MATERIALS AND ENGINEERING (2017)
Shrinkage and Warpage Optimization of Expanded-Perlite-Filled Polypropylene Composites in Extrusion-Based Additive Manufacturing
Martin Spoerk et al.
MACROMOLECULAR MATERIALS AND ENGINEERING (2017)
3D Printing of BaTiO3/PVDF Composites with Electric In Situ Poling for Pressure Sensor Applications
Hoejin Kim et al.
MACROMOLECULAR MATERIALS AND ENGINEERING (2017)
Drop-on-demand electromagnetic printing of metallic droplets
Zhiwei Luo et al.
MATERIALS LETTERS (2017)
Stiff, porous scaffolds from magnetized alumina particles aligned by magnetic freeze casting
Michael B. Frank et al.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2017)
When lithography meets self-assembly: a review of recent advances in the directed assembly of complex metal nanostructures on planar and textured surfaces
Robert A. Hughes et al.
NANOTECHNOLOGY (2017)
Fused Deposition Modelling of high temperature polymers: Exploring CNT PEEK composites
S. Berretta et al.
POLYMER TESTING (2017)
3D printing for continuous fiber reinforced thermoplastic composites: mechanism and performance
Chuncheng Yang et al.
RAPID PROTOTYPING JOURNAL (2017)
Structure and mechanical behavior of Big Area Additive Manufacturing (BAAM) materials
Chad E. Duty et al.
RAPID PROTOTYPING JOURNAL (2017)
Acoustic control of microstructures during direct ink writing of two-phase materials
Leanne Friedrich et al.
SENSORS AND ACTUATORS A-PHYSICAL (2017)
3D Printing Hierarchical Silver Nanowire Aerogel with Highly Compressive Resilience and Tensile Elongation through Tunable Poisson's Ratio
Pengli Yan et al.
SMALL (2017)
3D Printing in Liver Surgery: A Systematic Review
Jan Sylwester Witowski et al.
TELEMEDICINE AND E-HEALTH (2017)
Mechanically Oriented 3D Collagen Hydrogel for Directing Neurite Growth
Merav Antman-Passig et al.
TISSUE ENGINEERING PART A (2017)
Anisotropic forces from spatially constrained focal adhesions mediate contact guidance directed cell migration
Arja Ray et al.
NATURE COMMUNICATIONS (2017)
Effective Assembly of Nano-Ceramic Materials for High and Anisotropic Thermal Conductivity in a Polymer Composite
Haeleen Hong et al.
POLYMERS (2017)
3D printing of a mechanically durable superhydrophobic porous membrane for oil-water separation
Juan Lv et al.
JOURNAL OF MATERIALS CHEMISTRY A (2017)
3D-printed barium titanate/poly-(vinylidene fluoride) nano-hybrids with anisotropic dielectric properties
N. Phatharapeetranun et al.
JOURNAL OF MATERIALS CHEMISTRY C (2017)
3D Printing in Liver Surgery: A Systematic Review
Jan Sylwester Witowski et al.
TELEMEDICINE AND E-HEALTH (2017)
A Review on 3D Printed Smart Devices for 4D Printing
Jeongwoo Lee et al.
INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING-GREEN TECHNOLOGY (2017)
Applications of artificial intelligence in intelligent manufacturing: a review
Bo-hu Li et al.
FRONTIERS OF INFORMATION TECHNOLOGY & ELECTRONIC ENGINEERING (2017)
A review of 4D printing
Farhang Momeni et al.
MATERIALS & DESIGN (2017)
Additive manufacturing of PLA structures using fused deposition modelling: Effect of process parameters on mechanical properties and their optimal selection
J. M. Chacon et al.
MATERIALS & DESIGN (2017)
Welding of 3D-printed carbon nanotube-polymer composites by locally induced microwave heating
Charles B. Sweeney et al.
SCIENCE ADVANCES (2017)
Direct 4D printing via active composite materials
Zhen Ding et al.
SCIENCE ADVANCES (2017)
3D Printing Macroscale Engineered Materials Using Ultrasound Directed Self-Assembly and Stereolithography
John Greenhall et al.
ADVANCED MATERIALS TECHNOLOGIES (2017)
A Review on the 3D Printing of Functional Structures for Medical Phantoms and Regenerated Tissue and Organ Applications
Kan Wang et al.
ENGINEERING (2017)
3D-Printing of Meso-structurally Ordered Carbon Fiber/Polymer Composites with Unprecedented Orthotropic Physical Properties
James P. Lewicki et al.
SCIENTIFIC REPORTS (2017)
Direct Ink Write (DIW) 3D Printed Cellulose Nanocrystal Aerogel Structures
Vincent Chi-Fung Li et al.
SCIENTIFIC REPORTS (2017)
3D inkjet-printed UV-curable inks for multi-functional electromagnetic applications
Ehab Saleh et al.
ADDITIVE MANUFACTURING (2017)
Rotary jet spinning review - a potential high yield future for polymer nanofibers
James J. Rogalski et al.
NANOCOMPOSITES (2017)
Multiscale Nanoparticle Assembly: From Particulate Precise Manufacturing to Colloidal Processing
Markus Niederberger
ADVANCED FUNCTIONAL MATERIALS (2017)
Anisotropic mechanical properties of oriented carbon fiber filled polymer composites produced with fused filament fabrication
Delin Jiang et al.
ADDITIVE MANUFACTURING (2017)
Recent advances in 3D printing of porous ceramics: A review
Lim Chin Hwa et al.
CURRENT OPINION IN SOLID STATE & MATERIALS SCIENCE (2017)
3D printing of CNT-and graphene-based conductive polymer nanocomposites by fused deposition modeling
K. Gnanasekaran et al.
APPLIED MATERIALS TODAY (2017)
A review on inkjet printing of CNT composites for smart applications
Saeideh Kholghi Eshkalak et al.
APPLIED MATERIALS TODAY (2017)
Topography on a subcellular scale modulates cellular adhesions and actin stress fiber dynamics in tumor associated fibroblasts
Mikheil Azatov et al.
PHYSICAL BIOLOGY (2017)
Three-Dimensional Printed Thermal Regulation Textiles
Tingting Gao et al.
ACS NANO (2017)
Hybrid 3D Printing of Soft Electronics
Alexander D. Valentine et al.
ADVANCED MATERIALS (2017)
Short fiber reinforced 3d printed ceramic composite with shear induced alignment
Doruk Erdem Yunus et al.
CERAMICS INTERNATIONAL (2017)
Thermal analysis of additive manufacturing of large-scale thermoplastic polymer composites
Brett G. Compton et al.
ADDITIVE MANUFACTURING (2017)
Investigation of Sintering Shrinkage in Binder Jetting Additive Manufacturing Process
Yujia Wang et al.
45TH SME NORTH AMERICAN MANUFACTURING RESEARCH CONFERENCE (NAMRC 45) (2017)
Anisotropy of thermal conductivity in 3D printed polymer matrix composites for space based cube satellites
Corey Shemelya et al.
ADDITIVE MANUFACTURING (2017)
Rapid curing and additive manufacturing of thermoset systems using scanning microwave heating of carbon nanotube/epoxy composites
Morgan G. B. Odom et al.
CARBON (2017)
One-Step Solvent Evaporation-Assisted 3D Printing of Piezoelectric PVDF Nanocomposite Structures
Sampada Bodkhe et al.
ACS APPLIED MATERIALS & INTERFACES (2017)
High through-plane thermal conductivity of polymer based product with vertical alignment of graphite flakes achieved via 3D printing
Yunchao Jia et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2017)
Acoustic patterning for 3D embedded electrically conductive wire in stereolithography
Doruk Erdem Yunus et al.
JOURNAL OF MICROMECHANICS AND MICROENGINEERING (2017)
Effect of aligned magnetic field on liquid thin film flow of magnetic-nanofluids embedded with graphene nanoparticles
N. Sandeep
ADVANCED POWDER TECHNOLOGY (2017)
Dynamic Nanoparticle Assemblies for Biomedical Applications
Fangyuan Li et al.
ADVANCED MATERIALS (2017)
Cellulose Nanocrystal Inks for 3D Printing of Textured Cellular Architectures
Gilberto Siqueira et al.
ADVANCED FUNCTIONAL MATERIALS (2017)
Biomimetic Anisotropic Reinforcement Architectures by Electrically Assisted Nanocomposite 3D Printing
Yang Yang et al.
ADVANCED MATERIALS (2017)
3D printing of polymer matrix composites: A review and prospective
Xin Wang et al.
COMPOSITES PART B-ENGINEERING (2017)
Inhibition of histone acetylation by curcumin reduces alcohol-induced fetal cardiac apoptosis
Xiaochen Yan et al.
JOURNAL OF BIOMEDICAL SCIENCE (2017)
Independent Control of Topography for 3D Patterning of the ECM Microenvironment
Jiyun Kim et al.
ADVANCED MATERIALS (2016)
Spray-Coated Halloysite-Epoxy Composites: A Means To Create Mechanically Robust, Vertically Aligned Nanotube Composites
Kenan Song et al.
ACS APPLIED MATERIALS & INTERFACES (2016)
Enhanced Wear Resistance of Transparent Epoxy Composite Coatings with Vertically Aligned Halloysite Nanotubes
Kenan Song et al.
ACS APPLIED MATERIALS & INTERFACES (2016)
Shape-Changing Photodegradable Hydrogels for Dynamic 3D Cell Culture
Elli Kapyla et al.
ACS APPLIED MATERIALS & INTERFACES (2016)
Flexible Circuits and Soft Actuators by Printing Assembly of Graphene
Wenbo Li et al.
ACS APPLIED MATERIALS & INTERFACES (2016)
Bioactive glass-based materials with hierarchical porosity for medical applications: Review of recent advances
Francesco Baino et al.
ACTA BIOMATERIALIA (2016)
Actuating Soft Matter with Magnetic Torque
Randall M. Erb et al.
ADVANCED FUNCTIONAL MATERIALS (2016)
Ultrasound directed self-assembly of user-specified patterns of nanoparticles dispersed in a fluid medium
J. Greenhall et al.
APPLIED PHYSICS LETTERS (2016)
3D-printing techniques in a medical setting: a systematic literature review
Philip Tack et al.
BIOMEDICAL ENGINEERING ONLINE (2016)
Orientational nanoparticle assemblies and biosensors
Wei Ma et al.
BIOSENSORS & BIOELECTRONICS (2016)
A Review of 3D Printing Techniques and the Future in Biofabrication of Bioprinted Tissue
Satyajit Patra et al.
CELL BIOCHEMISTRY AND BIOPHYSICS (2016)
Evaluation and prediction of the tensile properties of continuous fiber-reinforced 3D printed structures
Garrett W. Melenka et al.
COMPOSITE STRUCTURES (2016)
Fused deposition modelling with ABS-graphene nanocomposites
Sithiprumnea Dul et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2016)
All-Polystyrene 3D-Printed Electrochemical Device with Embedded Carbon Nanofiber-Graphite-Polystyrene Composite Conductor
Zuhayr Rymansaib et al.
ELECTROANALYSIS (2016)
Developments of 3D Printing Microfluidics and Applications in Chemistry and Biology: a Review
Yong He et al.
ELECTROANALYSIS (2016)
Vertical filler alignment of boron nitride/epoxy composite for thermal conductivity enhancement via external magnetic field
Kiho Kim et al.
INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2016)
Effect of electrospinning on the ionic conductivity of polyacrylonitrile/polymethyl methacrylate nanofibrous membranes: optimization based on the response surface method
Mir Reza Mousavi et al.
IRANIAN POLYMER JOURNAL (2016)
Rapid prototyping of continuous carbon fiber reinforced polylactic acid composites by 3D printing
Nanya Li et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2016)
3D-printed fluidic networks as vasculature for engineered tissue
Ian S. Kinstlinger et al.
LAB ON A CHIP (2016)
Forward electrohydrodynamic inkjet printing of optical microlenses on microfluidic devices
V. Vespini et al.
LAB ON A CHIP (2016)
Cooperative Ordering and Kinetics of Cellulose Nanocrystal Alignment in a Magnetic Field
Kevin J. De France et al.
LANGMUIR (2016)
Exfoliation of Boron Nitride Platelets by Enhanced Interfacial Interaction with Polyethylene
Navid Tajaddod et al.
MACROMOLECULAR MATERIALS AND ENGINEERING (2016)
Preparation and highlighted applications of magnetic microparticles and nanoparticles: a review on recent advances
Deli Xiao et al.
MICROCHIMICA ACTA (2016)
3D printing: an emerging tool for novel microfluidics and lab-on-a-chip applications
Alireza Ahmadian Yazdi et al.
MICROFLUIDICS AND NANOFLUIDICS (2016)
Remote Magnetic Orientation of 3D Collagen Hydrogels for Directed Neuronal Regeneration
Merav Antman-Passig et al.
NANO LETTERS (2016)
Shear induced alignment of short nanofibers in 3D printed polymer composites
Doruk Erdem Yunus et al.
NANOTECHNOLOGY (2016)
A 3D bioprinting system to produce human-scale tissue constructs with structural integrity
Hyun-Wook Kang et al.
NATURE BIOTECHNOLOGY (2016)
Thermal conductivity of polymer-based composites: Fundamentals and applications
Hongyu Chen et al.
PROGRESS IN POLYMER SCIENCE (2016)
3D Printing of Graphene Aerogels
Qiangqiang Zhang et al.
SMALL (2016)
3D printed components with ultrasonically arranged microscale structure
Thomas M. Llewellyn-Jones et al.
SMART MATERIALS AND STRUCTURES (2016)
Magnetic assembly of transparent and conducting graphene-based functional composites
Hortense Le Ferrand et al.
NATURE COMMUNICATIONS (2016)
Programmed planar-to-helical shape transformations of composite hydrogels with bioinspired layered fibrous structures
Zhi Jian Wang et al.
JOURNAL OF MATERIALS CHEMISTRY B (2016)
Iron oxide nanoparticles for neuronal cell applications: uptake study and magnetic manipulations
Michal Marcus et al.
JOURNAL OF NANOBIOTECHNOLOGY (2016)
Orthotropic mechanical properties of fused deposition modelling parts described by classical laminate theory
Caterina Casavola et al.
MATERIALS & DESIGN (2016)
Mechanical and thermal properties of ABS/montmorillonite nanocomposites for fused deposition modeling 3D printing
Zixiang Weng et al.
MATERIALS & DESIGN (2016)
3D printed anisotropic dielectric composite with meta-material features
D. V. Isakov et al.
MATERIALS & DESIGN (2016)
High-performance battery electrodes via magnetic templating
J. S. Sander et al.
NATURE ENERGY (2016)
All-printed magnetically self-healing electrochemical devices
Amay J. Bandodkar et al.
SCIENCE ADVANCES (2016)
Multi-shape active composites by 3D printing of digital shape memory polymers
Jiangtao Wu et al.
SCIENTIFIC REPORTS (2016)
Multimaterial 4D Printing with Tailorable Shape Memory Polymers
Qi Ge et al.
SCIENTIFIC REPORTS (2016)
Roll-to-Roll Coating Technology and Its Applications: A Review
Janghoon Park et al.
INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING (2016)
Effects of extrudate swell and nozzle geometry on fiber orientation in Fused Filament Fabrication nozzle flow
Blake P. Heller et al.
ADDITIVE MANUFACTURING (2016)
3-D printing of multifunctional carbon nanotube yarn reinforced components
John M. Gardner et al.
ADDITIVE MANUFACTURING (2016)
Review for application of electrospinning and electrospun nanofibers technology in textile industry
Mohammad Mirjalili et al.
JOURNAL OF NANOSTRUCTURE IN CHEMISTRY (2016)
Deposition of ordered two-phase materials using microfluidic print nozzles with acoustic focusing
Rachel R. Collino et al.
EXTREME MECHANICS LETTERS (2016)
Magnetically Aligned Iron Oxide/Gold Nanoparticle-Decorated Carbon Nanotube Hybrid Structure as a Humidity Sensor
Jaewook Lee et al.
ACS APPLIED MATERIALS & INTERFACES (2015)
Printing in Three Dimensions with Graphene
Esther Garcia-Tunon et al.
ADVANCED MATERIALS (2015)
Capacitive Soft Strain Sensors via Multicore-Shell Fiber Printing
Andreas Frutiger et al.
ADVANCED MATERIALS (2015)
Bioinspired Super-Wettability from Fundamental Research to Practical Applications
Liping Wen et al.
ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2015)
Low temperature graphitization of interphase polyacrylonitrile (PAN)
Yiying Zhang et al.
CARBON (2015)
Conductive 3D microstructures by direct 3D printing of polymer/carbon nanotube nanocomposites via liquid deposition modeling
Giovanni Postiglione et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2015)
Additive manufacturing of carbon fiber reinforced thermoplastic composites using fused deposition modeling
Fuda Ning et al.
COMPOSITES PART B-ENGINEERING (2015)
Fully magnetic printing by generation of magnetic droplets on demand with a coilgun
Vladislav Vekselman et al.
JOURNAL OF APPLIED PHYSICS (2015)
Mechanical, Electromagnetic, and X-ray Shielding Characterization of a 3D Printable Tungsten-Polycarbonate Polymer Matrix Composite for Space-Based Applications
Corey M. Shemelya et al.
JOURNAL OF ELECTRONIC MATERIALS (2015)
Advances of drag-reducing surface technologies in turbulence based on boundary layer control
Luo Yuehao et al.
JOURNAL OF HYDRODYNAMICS (2015)
Recent Progress on Fabrications and Applications of Boron Nitride Nanomaterials: A Review
Xiang-Fen Jiang et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2015)
Effects of gold nanoparticle film morphology on the alignment of a nematic liquid crystal
M. -Vicki Meli et al.
LIQUID CRYSTALS (2015)
Polyethylene-Assisted Exfoliation of Hexagonal Boron Nitride in Composite Fibers: A Combined Experimental and Computational Study
Jiangsha Meng et al.
MACROMOLECULAR CHEMISTRY AND PHYSICS (2015)
Polymer Interphase Self-Reinforcement and Strengthening Mechanisms in Low-Loaded Nanocomposite Fibers
Kenan Song et al.
MACROMOLECULAR CHEMISTRY AND PHYSICS (2015)
High-Resolution Patterns of Quantum Dots Formed by Electrohydrodynamic Jet Printing for Light-Emitting Diodes
Bong Hoon Kim et al.
NANO LETTERS (2015)
Self-assembly and applications of anisotropic nanomaterials: A review
Karl Thorkelsson et al.
NANO TODAY (2015)
3D printing of a multifunctional nanocomposite helical liquid sensor
Shuang-zhuang Guo et al.
NANOSCALE (2015)
The observation of square ice in graphene questioned
Wu Zhou et al.
NATURE (2015)
Magnetically assisted slip casting of bioinspired heterogeneous composites
Hortense Le Ferrand et al.
NATURE MATERIALS (2015)
Spectral analysis of lamellae evolution and constraining effects aided by nano-carbons: A coupled experimental and simulation study
Kenan Song et al.
POLYMER (2015)
Tensile and fatigue behavior of layered acrylonitrile butadiene styrene
Sophia Ziemian et al.
RAPID PROTOTYPING JOURNAL (2015)
Continuous liquid interface production of 3D objects
John R. Tumbleston et al.
SCIENCE (2015)
3D Printing Fabrication of Amorphous Thermoelectric Materials with Ultralow Thermal Conductivity
Minhong He et al.
SMALL (2015)
Mechanisms, Capabilities, and Applications of High-Resolution Electrohydrodynamic Jet Printing
M. Serdar Onses et al.
SMALL (2015)
Understanding and overcoming shear alignment of fibers during extrusion
Joshua J. Martin et al.
SOFT MATTER (2015)
Multimaterial magnetically assisted 3D printing of composite materials
Dimitri Kokkinis et al.
NATURE COMMUNICATIONS (2015)
Designing bioinspired composite reinforcement architectures via 3D magnetic printing
Joshua J. Martin et al.
NATURE COMMUNICATIONS (2015)
3D Printable Graphene Composite
Xiaojun Wei et al.
SCIENTIFIC REPORTS (2015)
Mechanical property characterization and simulation of fused deposition modeling Polycarbonate parts
Miquel Domingo-Espin et al.
MATERIALS & DESIGN (2015)
Fused deposition modeling with polypropylene
O. S. Carneiro et al.
MATERIALS & DESIGN (2015)
Fiber Encapsulation Additive Manufacturing: An Enabling Technology for 3D Printing of Electromechanical Devices and Robotic Components
Matt Saari et al.
3D PRINTING AND ADDITIVE MANUFACTURING (2015)
4D Printing Technology: A Review
Jin Choi et al.
3D PRINTING AND ADDITIVE MANUFACTURING (2015)
3D Printing of Reduced Graphene Oxide Nanowires
Jung Hyun Kim et al.
ADVANCED MATERIALS (2015)
Raster angle mechanics in fused deposition modelling
Bin Huang et al.
JOURNAL OF COMPOSITE MATERIALS (2015)
Acoustic field controlled patterning and assembly of anisotropic particles
Rachel R. Collino et al.
EXTREME MECHANICS LETTERS (2015)
Hydrodynamic function of biomimetic shark skin: effect of denticle pattern and spacing
Li Wen et al.
BIOINSPIRATION & BIOMIMETICS (2015)
The effects of PLA color on material properties of 3-D printed components
Ben Wittbrodt et al.
ADDITIVE MANUFACTURING (2015)
Characterizing the effect of additives to ABS on the mechanical property anisotropy of specimens fabricated by material extrusion 3D printing
Angel R. Torrado et al.
ADDITIVE MANUFACTURING (2015)
Superparamagnetic Twist-Type Actuators with Shape-Independent Magnetic Properties and Surface Functionalization for Advanced Biomedical Applications
Christian Peters et al.
ADVANCED FUNCTIONAL MATERIALS (2014)
3D-Printing of Lightweight Cellular Composites
Brett G. Compton et al.
ADVANCED MATERIALS (2014)
Dielectrophoretic bending of directly printed free-standing ultra-soft nanowires
P. Galliker et al.
APPLIED PHYSICS LETTERS (2014)
Preparation of aligned porous chitin nanowhisker foams by directional freeze-casting technique
Yiming Zhou et al.
CARBOHYDRATE POLYMERS (2014)
Self-assembly of colloidal one-dimensional nanocrystals
Shuang-Yuan Zhang et al.
CHEMICAL SOCIETY REVIEWS (2014)
Ultrahigh Thermal Conductivity of Assembled Aligned Multi layer Graphene/Epoxy Composite
Qi Li et al.
CHEMISTRY OF MATERIALS (2014)
Aligning carbon nanotubes using bulk acoustic waves to reinforce polymer composites
Michael D. Haslam et al.
COMPOSITES PART B-ENGINEERING (2014)
Mechanics of composite sandwich structures with bioinspired core
Sandip Haldar et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2014)
Highly oriented carbon fiber-polymer composites via additive manufacturing
Halil L. Tekinalp et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2014)
Inkjet printing of magnetic materials with aligned anisotropy
Han Song et al.
JOURNAL OF APPLIED PHYSICS (2014)
Biomimetic shark skin: design, fabrication and hydrodynamic function
Li Wen et al.
JOURNAL OF EXPERIMENTAL BIOLOGY (2014)
The importance of carbon fiber to polymer additive manufacturing
Lonnie J. Love et al.
JOURNAL OF MATERIALS RESEARCH (2014)
Forming Crystalline Polymer-Nano Interphase Structures for High-Modulus and High-Tensile/Strength Composite Fibers
Jiangsha Meng et al.
MACROMOLECULAR MATERIALS AND ENGINEERING (2014)
Effects of nanopillar array diameter and spacing on cancer cell capture and cell behaviors
Shunqiang Wang et al.
NANOSCALE (2014)
Mechanical properties of components fabricated with open-source 3-D printers under realistic environmental conditions
B. M. Tymrak et al.
MATERIALS & DESIGN (2014)
Damage of short-fibre reinforced materials with anisotropy induced by complex fibres orientations
D. Notta-Cuvier et al.
MECHANICS OF MATERIALS (2014)
Enhanced Cell Adhesion and Alignment on Micro-Wavy Patterned Surfaces
Jia Hu et al.
PLOS ONE (2014)
Forced assembly by multilayer coextrusion to create oriented graphene reinforced polymer nanocomposites
Xiguang Li et al.
POLYMER (2014)
Direct Alignment and Patterning of Silver Nanowires by Electrohydrodynamic Jet Printing
Hyungdong Lee et al.
SMALL (2014)
Ultrasonic assembly of anisotropic short fibre reinforced composites
M. -S. Scholz et al.
ULTRASONICS (2014)
Inkjet Printing of High Aspect Ratio Superparamagnetic SU-8 Microstructures with Preferential Magnetic Directions
Loic Jacot-Descombes et al.
MICROMACHINES (2014)
High Yield Growth of Patterned Vertically Aligned Carbon Nanotubes Using Inkjet-Printed Catalyst
James D. Beard et al.
ACS APPLIED MATERIALS & INTERFACES (2013)
Tailoring Polyacrylonitrile Interfacial Morphological Structure by Crystallization in the Presence of Single-Wall Carbon Nanotubes
Yiying Zhang et al.
ACS APPLIED MATERIALS & INTERFACES (2013)
Mechanics of Platelet-Reinforced Composites Assembled Using Mechanical and Magnetic Stimuli
Rafael Libanori et al.
ACS APPLIED MATERIALS & INTERFACES (2013)
Efficient Inkjet Printing of Graphene
Jiantong Li et al.
ADVANCED MATERIALS (2013)
25th Anniversary Article: What Can Be Done with the Langmuir-Blodgett Method? Recent Developments and its Critical Role in Materials Science
Katsuhiko Ariga et al.
ADVANCED MATERIALS (2013)
3D Printing of Interdigitated Li-Ion Microbattery Architectures
Ke Sun et al.
ADVANCED MATERIALS (2013)
Inkjet printing of aligned single-walled carbon-nanotube thin films
Yuki Takagi et al.
APPLIED PHYSICS LETTERS (2013)
Continuous and unconstrained manipulation of micro-particles using phase-control of bulk acoustic waves
J. Greenhall et al.
APPLIED PHYSICS LETTERS (2013)
Patterning of controllable surface wettability for printing techniques
Dongliang Tian et al.
CHEMICAL SOCIETY REVIEWS (2013)
Colloidal superparticles from nanoparticle assembly
Tie Wang et al.
CHEMICAL SOCIETY REVIEWS (2013)
Effects of pulsing frequency on characteristics of electrohydrodynamic inkjet using micro-Al and nano-Ag particles
Min Wook Lee et al.
EXPERIMENTAL THERMAL AND FLUID SCIENCE (2013)
Lubrication of Poly(vinyl alcohol) Chain Orientation by Carbon Nano-Chips in Composite Tapes
Kenan Song et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2013)
Microwave absorption property of aligned MWCNT/Fe3O4
H. Hekmatara et al.
JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS (2013)
Inkjet Printing of High Conductivity, Flexible Graphene Patterns
Ethan B. Secor et al.
JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2013)
Assembly of Nanoparticles: Towards Multiscale Three-Dimensional Architecturing
Hyangki Sung et al.
KONA Powder and Particle Journal (2013)
Controlling Anisotropic Drug Diffusion in Lipid-Fe3O4 Nanoparticle Hybrid Mesophases by Magnetic Alignment
Jijo J. Vallooran et al.
LANGMUIR (2013)
Large-scale ordered 1D-nanomaterials arrays: Assembly or not?
Moria Kwiat et al.
NANO TODAY (2013)
Hierarchical patterns of three-dimensional block-copolymer films formed by electrohydrodynamic jet printing and self-assembly
M. Serdar Onses et al.
NATURE NANOTECHNOLOGY (2013)
Solvent-Cast Three-Dimensional Printing of Multifunctional Microsystems
Shuang-Zhuang Guo et al.
SMALL (2013)
Self-shaping composites with programmable bioinspired microstructures
Randall M. Erb et al.
NATURE COMMUNICATIONS (2013)
Structural Polymer-Based Carbon Nanotube Composite Fibers: Understanding the Processing-Structure-Performance Relationship
Kenan Song et al.
MATERIALS (2013)
Locally Reinforced Polymer-Based Composites for Elastic Electronics
Randall M. Erb et al.
ACS APPLIED MATERIALS & INTERFACES (2012)
Fabrication of Highly-Aligned, Conductive, and Strong Graphene Papers Using Ultralarge Graphene Oxide Sheets
Xiuyi Lin et al.
ACS NANO (2012)
Functional Protein Microarrays by Electrohydrodynamic Jet Printing
Kazuyo Shigeta et al.
ANALYTICAL CHEMISTRY (2012)
Bio-Inspired Antifouling Strategies
Chelsea M. Kirschner et al.
ANNUAL REVIEW OF MATERIALS RESEARCH, VOL 42 (2012)
Patterned oxide semiconductor by electrohydrodynamic jet printing for transparent thin film transistors
Sangkyu Lee et al.
APPLIED PHYSICS LETTERS (2012)
A multi-wall carbon nanotube-reinforced high-temperature resistant adhesive for bonding carbon/carbon composites
Jiangsong Zhang et al.
CARBON (2012)
Layered Thin Film Micro Parts Reinforced with Aligned Short Fibers in Laser Stereolithography by Applying Magnetic Field
Takeshi Nakamoto et al.
JOURNAL OF ADVANCED MECHANICAL DESIGN SYSTEMS AND MANUFACTURING (2012)
Effects of alignment, pH, surfactant, and solvent on heat transfer nanofluids containing Fe2O3 and CuO nanoparticles
Hammad Younes et al.
JOURNAL OF APPLIED PHYSICS (2012)
Dielectrophoretically structured piezoelectric composites with high aspect ratio piezoelectric particles inclusions
D. A. van den Ende et al.
JOURNAL OF APPLIED PHYSICS (2012)
Interactions of neurons with topographic nano cues affect branching morphology mimicking neuron-neuron interactions
Koby Baranes et al.
JOURNAL OF MOLECULAR HISTOLOGY (2012)
Orientation of a Dispersion of Kaolinite Flowing in a Jet
S. Junaid S. Qazi et al.
LANGMUIR (2012)
A Simple, Low-Cost Conductive Composite Material for 3D Printing of Electronic Sensors
Simon J. Leigh et al.
PLOS ONE (2012)
Composites Reinforced in Three Dimensions by Using Low Magnetic Fields
Randall M. Erb et al.
SCIENCE (2012)
Macroscopic-Scale Alignment of Ultralong Ag Nanowires in Polymer Nanofiber Mat and Their Hierarchical Structures by Magnetic-Field-Assisted Electrospinning
Chuan-Ling Zhang et al.
SMALL (2012)
Direct printing of nanostructures by electrostatic autofocussing of ink nanodroplets
P. Galliker et al.
NATURE COMMUNICATIONS (2012)
Recent Advances in Directed Assembly of Nanowires or Nanotubes
Mei Liu et al.
NANO-MICRO LETTERS (2012)
The Effect of Nanotube Content and Orientation on the Mechanical Properties of Polymer-Nanotube Composite Fibers: Separating Intrinsic Reinforcement from Orientational Effects
Fiona M. Blighe et al.
ADVANCED FUNCTIONAL MATERIALS (2011)
3D Microperiodic Hydrogel Scaffolds for Robust Neuronal Cultures
Jennifer N. Hanson Shepherd et al.
ADVANCED FUNCTIONAL MATERIALS (2011)
Conformal Printing of Electrically Small Antennas on Three-Dimensional Surfaces
Jacob J. Adams et al.
ADVANCED MATERIALS (2011)
Controlled freezing and freeze drying: a versatile route for porous and micro-/nano-structured materials
Lei Qian et al.
JOURNAL OF CHEMICAL TECHNOLOGY AND BIOTECHNOLOGY (2011)
Thermo-mechanical properties of a highly filled polymeric composites for Fused Deposition Modeling
M. Nikzad et al.
MATERIALS & DESIGN (2011)
A Review on Functionalized Gold Nanoparticles for Biosensing Applications
Shuwen Zeng et al.
PLASMONICS (2011)
Design and Application of Inorganic Nanoparticle Superstructures: Current Status and Future challenges
Yan Gao et al.
SMALL (2011)
Directed Self-Assembly of Nanoparticles
Marek Grzelczak et al.
ACS NANO (2010)
Strong Dependence of Mechanical Properties on Fiber Diameter for Polymer-Nanotube Composite Fibers: Differentiating Defect from Orientation Effects
Karen Young et al.
ACS NANO (2010)
Hybrids of Magnetic Nanoparticles with Double-Hydrophilic Core/Shell Cylindrical Polymer Brushes and Their Alignment in a Magnetic Field
Youyong Xu et al.
ADVANCED FUNCTIONAL MATERIALS (2010)
On Ejecting Colloids Against Capillarity from Sub-micrometer Openings: On-Demand Dielectrophoretic Nanoprinting
Niklas C. Schirmer et al.
ADVANCED MATERIALS (2010)
Magnetic alignment of Ni-coated single wall carbon nanotubes in heat transfer nanofluids
Mark Horton et al.
JOURNAL OF APPLIED PHYSICS (2010)
High-speed and drop-on-demand printing with a pulsed electrohydrodynamic jet
S. Mishra et al.
JOURNAL OF MICROMECHANICS AND MICROENGINEERING (2010)
An experimental analysis of the influence of the ink properties on the drop formation for direct thermal inkjet printing of high solid content aqueous 3Y-TZP suspensions
Emre Oezkol et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2010)
Electrohydrodynamic Direct Writing of Biomedical Polymers and Composites
Zeeshan Ahmad et al.
MACROMOLECULAR MATERIALS AND ENGINEERING (2010)
Mutual Alignment of Block Copolymer-Magnetic Nanoparticle Composites in a Magnetic Field
Matthew R. Hammond et al.
MACROMOLECULES (2010)
Nanoscale, Electrified Liquid Jets for High-Resolution Printing of Charge
Jang-Ung Park et al.
NANO LETTERS (2010)
Properties and emerging applications of self-assembled structures made from inorganic nanoparticles
Zhihong Nie et al.
NATURE NANOTECHNOLOGY (2010)
Sintering of inkjet printed copper nanoparticles for flexible electronics
Seonhee Jang et al.
SCRIPTA MATERIALIA (2010)
Materials Fabricated by Micro- and Nanoparticle Assembly - The Challenging Path from Science to Engineering
Orlin D. Velev et al.
ADVANCED MATERIALS (2009)
Multiscale Methods for Composites: A Review
P. Kanouté et al.
ARCHIVES OF COMPUTATIONAL METHODS IN ENGINEERING (2009)
Directed assembly of gold nanoparticles
Fredrik Westerlund et al.
CURRENT OPINION IN COLLOID & INTERFACE SCIENCE (2009)
Directed assembly of nanowires
Michael C. P. Wang et al.
MATERIALS TODAY (2009)
Evidence for directed self-assembly of quantum dots in a nematic liquid crystal
Rajratan Basu et al.
PHYSICAL REVIEW E (2009)
Alignment of Nanoparticles in Polymer Matrices
R. V. Tal'roze et al.
POLYMER SCIENCE SERIES A (2009)
Nanoparticle assembly for 1D and 2D ordered structures
Sudhanshu Srivastava et al.
SOFT MATTER (2009)
A study of melt flow analysis of an ABS-Iron composite in fused deposition modelling process
Nikzad Mostafa et al.
TSINGHUA SCIENCE AND TECHNOLOGY (2009)
Direct-write assembly of microperiodic silk fibroin scaffolds for tissue engineering applications
Sourabh Ghosh et al.
ADVANCED FUNCTIONAL MATERIALS (2008)
Scaling laws for jet pulsations associated with high-resolution electrohydrodynamic printing
Hong Kyoon Choi et al.
APPLIED PHYSICS LETTERS (2008)
Template-directed synthesis of oxide nanotubes: Fabrication, characterization, and applications
Changdeuck Bae et al.
CHEMISTRY OF MATERIALS (2008)
Self-assembling nanoparticles at surfaces and interfaces
Sachin Kinge et al.
CHEMPHYSCHEM (2008)
Direct electrochemistry study of glucose oxidase on Pt nanoparticle-modified aligned carbon nanotubes electrode by the assistance of chitosan-CdS and its biosensoring for glucose
Jing Yang et al.
ELECTROCHEMISTRY COMMUNICATIONS (2008)
Aligned single-walled carbon nanotubes by Langmuir-Blodgett technique
Lu Jia et al.
JOURNAL OF APPLIED PHYSICS (2008)
Variation of magnetic properties of composites filled with soft magnetic FeCoV particles by particle alignment in a magnetic field
B. Weidenfeller et al.
JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS (2008)
Optical manipulation of nanoparticles: a review
Maria Dienerowitz et al.
JOURNAL OF NANOPHOTONICS (2008)
Repairing a 35-mm-long median nerve defect with a chitosan/PGA artificial nerve graft in the human: A case study
Weimin Fan et al.
MICROSURGERY (2008)
Nanoscale Patterns of Oligonucleotides Formed by Electrohydrodynamic Jet Printing with Applications in Biosensing and Nanomaterials Assembly
Jang-Ung Park et al.
NANO LETTERS (2008)
Inkjet printing of single-walled carbon nanotubes and electrical characterization of the line pattern
Jin-Won Song et al.
NANOTECHNOLOGY (2008)
Self-assembly of cerium oxide nanostructures in ice molds
Ajay S. Karakoti et al.
SMALL (2008)
Fabrication and characterization of ZnO nanowire transistors with organic polymer as a dielectric layer
Ji-Hyuk Choi et al.
SOLID STATE COMMUNICATIONS (2008)
Macroscopic alignment of single-walled carbon nanotubes (SWNTs)
Alan R. Hopkins et al.
SURFACE & COATINGS TECHNOLOGY (2007)
Inkjet printing of transparent and conductive patterns of single-walled carbon nanotubes and PEDOT-PSS composites
Tero Mustonen et al.
PHYSICA STATUS SOLIDI B-BASIC SOLID STATE PHYSICS (2007)
Magnetic field enhanced thermal conductivity in heat transfer nanofluids containing Ni coated single wall carbon nanotubes
Brian Wright et al.
APPLIED PHYSICS LETTERS (2007)
High-resolution electrohydrodynamic jet printing
Jang-Ung Park et al.
NATURE MATERIALS (2007)
Inkjet printable polyaniline nanoformulations
Orawan Ngamna et al.
LANGMUIR (2007)
Direct writing of copper conductive patterns by ink-jet printing
Bong Kyun Park et al.
THIN SOLID FILMS (2007)
Fabrication of water-dispersible polyaniline-poly(4-styrenesulfonate) nanoparticles for inkjet-printed chemical-sensor applications
Jyongsik Jang et al.
ADVANCED MATERIALS (2007)
Synthesis of contamination-free silver nanoparticle suspensions for micro-interconnects
Steve Lien-Chung Hsu et al.
MATERIALS LETTERS (2007)
Shear-induced 1-D alignment of alumina nanoparticles in coatings
Lucas J. Brickweg et al.
JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH (2007)
Inkjet deposition and characterization of transparent conducting electroactive polyaniline composite films with a high carbon nanotube loading fraction
William R. Small et al.
JOURNAL OF MATERIALS CHEMISTRY (2007)
Inkjet printed water sensitive transparent films from natural gum-carbon nanotube composites
Marc in het Panhuis et al.
SOFT MATTER (2007)
Structural and mechanical properties of single-wall carbon nanotube fibers
V. Pichot et al.
PHYSICAL REVIEW B (2006)
In situ magnetic field alignment of directly ordered L10 FePt nanoparticles
Jiao-Ming Qiu et al.
APPLIED PHYSICS LETTERS (2006)
Large scale directed assembly of nanoparticles using nanotrench templates
Xugang Xiong et al.
APPLIED PHYSICS LETTERS (2006)
Preparation of monodisperse polymer particles and capsules by ink-jet printing
Marcel R. Bohmer et al.
COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2006)
Ink-jet printing and microwave sintering of conductive silver tracks
Jolke Perelaer et al.
ADVANCED MATERIALS (2006)
Inkjet printing of electrically conductive patterns of carbon nanotubes
Krisztian Kordas et al.
SMALL (2006)
Direct ink-jet printing and low temperature conversion of conductive silver patterns
P. J. Smith et al.
JOURNAL OF MATERIALS SCIENCE (2006)
Solvation forces between colloidal nanoparticles: Directed alignment
Y Qin et al.
PHYSICAL REVIEW E (2006)
Carbon nanotubes as templates for one-dimensional nanoparticle assemblies
MA Correa-Duarte et al.
JOURNAL OF MATERIALS CHEMISTRY (2006)
Magnetic-field-induced assemblies of cobalt nanoparticles
GJ Cheng et al.
LANGMUIR (2005)
Millimeter scale alignment of magnetic nanoparticle functionalized microtubules in magnetic fields
M Platt et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2005)
Alignment of carbon nanotubes under low magnetic fields through attachment of magnetic nanoparticles
MA Correa-Duarte et al.
JOURNAL OF PHYSICAL CHEMISTRY B (2005)
Ink-jet printing and sintering of PZT
TM Wang et al.
JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2005)
Dog sciatic nerve regeneration across a 30-mm defect bridged by a chitosan/PGA artificial nerve graft
XD Wang et al.
BRAIN (2005)
Nanoparticles for electronic device applications: A brief review
I Matsui
JOURNAL OF CHEMICAL ENGINEERING OF JAPAN (2005)
Dispersion and alignment of carbon nanotubes in polymer matrix: A review
XL Xie et al.
MATERIALS SCIENCE & ENGINEERING R-REPORTS (2005)
One-dimensional assemblies of nanoparticles: Preparation, properties, and promise
ZY Tang et al.
ADVANCED MATERIALS (2005)
A three-dimensional planar photonic crystal using conducting polymers
L Oyhenart et al.
MICROWAVE AND OPTICAL TECHNOLOGY LETTERS (2005)
A low Curing temperature silver ink for use in ink-jet printing and subsequent production of conductive tracks
AL Dearden et al.
MACROMOLECULAR RAPID COMMUNICATIONS (2005)
Ink-jet printing of metallic nanoparticles and microemulsions
A Kamyshny et al.
MACROMOLECULAR RAPID COMMUNICATIONS (2005)
Fabrication and characterization of magnetic carbon nanotube composites
ZY Sun et al.
JOURNAL OF MATERIALS CHEMISTRY (2005)
Multiscale modeling of CVD film growth - a review of recent works
A Dollet
SURFACE & COATINGS TECHNOLOGY (2004)
Single wall carbon nanotube fibers extruded from super-acid suspensions: Preferred orientation, electrical, and thermal transport
W Zhou et al.
JOURNAL OF APPLIED PHYSICS (2004)
In-tandem deposition and sintering of printed gold nanoparticle inks induced by continuous Gaussian laser irradiation
J Chung et al.
APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING (2004)
Correlation of properties with preferred orientation in coagulated and stretch-aligned single-wall carbon nanotubes
S Badaire et al.
JOURNAL OF APPLIED PHYSICS (2004)
Development of new metal/polymer materials for rapid tooling using Fused deposition modelling
SH Masood et al.
MATERIALS & DESIGN (2004)
Drying-mediated self-assembly of nanoparticles
E Rabani et al.
NATURE (2003)
Nanofiber-reinforced polymers prepared by fused deposition modeling
ML Shofner et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2003)
Application of inkjet technology for the deposition of magnetic nanoparticles to form micron-scale structures
W Voit et al.
IEE PROCEEDINGS-SCIENCE MEASUREMENT AND TECHNOLOGY (2003)
Plastic-compatible low resistance printable gold nanoparticle conductors for flexible electronics
D Huang et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2003)
Examination of LiNbO3/nitride heterostructures
M Singh et al.
SOLID-STATE ELECTRONICS (2003)
Gate leakage suppression and contact engineering in nitride heterostructures
YR Wu et al.
JOURNAL OF APPLIED PHYSICS (2003)
Single wall nanotube and vapor grown carbon fiber reinforced polymers processed by extrusion freeform fabrication
ML Shofner et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2003)
Alignment of titania whisker by colloidal filtration in a high magnetic field
Y Sakka et al.
JAPANESE JOURNAL OF APPLIED PHYSICS PART 2-LETTERS (2002)
Freeform fabrication by controlled droplet deposition of powder filled melts
C Ainsley et al.
JOURNAL OF MATERIALS SCIENCE (2002)
Template-directed assembly using nanoparticle building blocks: A nanotectonic approach to organized materials
SA Davis et al.
CHEMISTRY OF MATERIALS (2001)
Short fiber reinforced composites for fused deposition modeling
WH Zhong et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2001)
Structural anisotropy of magnetically aligned single wall carbon nanotube films
BW Smith et al.
APPLIED PHYSICS LETTERS (2000)
分享论文
