4.6 Article

Rice Husk-Derived Cellulose Nanofibers: A Potential Sensor for Water-Soluble Gases

期刊

SENSORS
卷 21, 期 13, 页码 -

出版社

MDPI
DOI: 10.3390/s21134415

关键词

cellulose; nanocellulose; agricultural byproducts; gas sensor; biopolymers

资金

  1. United States Department of Agriculture (USDA)/National Institute of Food and Agriculture (NIFA) [2015-38821-24376]
  2. Tuskegee University GeorgeWashington Carver Agricultural Station (GWCAES)
  3. USDA/NIFA Evans-Allen Capacity Grant
  4. Auburn University Intramural Grants Program [IGP-200949]
  5. NIFA [2015-38821-24376, 810437] Funding Source: Federal RePORTER

向作者/读者索取更多资源

Cellulose and its derivatives have been explored as potential gas sensing materials due to their renewability, versatility, and biocompatibility. In this study, cellulose nanofibers and TEMPO-oxidized cellulose nanofibers extracted from rice husks were fabricated into highly sensitive gas sensing films. The results demonstrated that these nanocellulose-based sensors exhibit good sensitivity for detecting water-soluble gases under ambient conditions.
Cellulose and its derivatives have evoked much attention in sensor technology as host-matrices for conducting materials because of their versatility, renewability, and biocompatibility. However, only a few studies have dealt with the potential utilization of cellulose as a sensing material without a composite structure. In this study, cellulose nanofibers (CNF) and 2,2,6,6-tetramethylpiperidine-1-oxyl (TEMPO)-oxidized cellulose nanofibers (TOCNF) extracted from rice husks by using ultrasonic-assisted methods are introduced as a potential gas sensing material with highly sensitive performance. To fabricate nanocellulose-based films, CNF, TOCNF, and TOCNF with glycerol (TOCNF/G) were dispersed in water and applied on polyimide substrate with digital electrodes to form self-standing thin films by a drop-casting method. A transparent coating layer on the surface of the plate after drying is used for the detection of water-soluble gases such as acetone, ammonia, methane, and hydrogen sulfide gases at room temperature at 52% relative humidity. The sensor prototypes exhibited high sensitivity, and the detection limit was between 1 ppm and 5 ppm, with less than 10 min response and recovery time. The results indicate that both the CNF- and the TOCNF-coated sensors show good sensitivity toward ammonia and acetone, compared to other gases. A TOCNF/G-coated sensor exhibited minimum time in regard to response/recovery time, compared to a CNF-coated sensor. In this study, nanocellulose-based sensors were successfully fabricated using a low-cost process and a bio-based platform. They showed good sensitivity for the detection of various gases under ambient conditions. Therefore, our study results should further propel in-depth research regarding various applications of cellulose-based sensors in the future.

作者

我是这篇论文的作者
点击您的名字以认领此论文并将其添加到您的个人资料中。

评论

主要评分

4.6
评分不足

次要评分

新颖性
-
重要性
-
科学严谨性
-
评价这篇论文

推荐

暂无数据
暂无数据