Single-step reactive ion etching process for device integration of hafnium-zirconium-oxide (HZO)/titanium nitride (TiN) stacks

The integration of new materials such as high-k dielectrics or metals into advanced CMOS gate stacks has led to major developments in plasma etching. The authors present a study which is dedicated to the etching of amorphous hafnium zirconium oxide (HZO) and titanium nitride (TiN) layers with Ar/Cl-2 chemistry in one single step. By adjusting the gas ratio and the inductively coupled plasma power, the etching process is shown to have a slow and well controllable etch rate for HZO and TiN. Additionally, a high selectivity between both materials and SiO2 can be achieved. Gate stack etching was successfully demonstrated and transmission electron microscopy-images revealed good anisotropic etching for HZO and TiN with an etch stop in SiO2 without damaging the silicon underneath. The process is further applied for the fabrication of metal-ferroelectric-metal capacitors, here TiN-HZO-TiN, and the feasibility of the chosen material combination is proven by electrical characterization. The strategy of using low temperature plasma-enhanced atomic layer deposition for TiN-deposition and forming gas anneal after structuring leads to high remanent polarization-values.

Automated summary

The study focuses on one-step etching of HZO and TiN layers, achieving slow and controllable etch rates by adjusting gas ratio and plasma power, as well as high selectivity and good anisotropic etching.