相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。High fidelity simulation of ultrafine PM filtration by multiscale fibrous media characterized by a combination of X-ray CT and FIB-SEM
Zhengyuan Pan et al.
JOURNAL OF MEMBRANE SCIENCE (2021)
Direct numerical simulation and experimental validation of flow resistivity of nonwoven fabric filter
Mohammad Irwan F. Rozy et al.
AICHE JOURNAL (2020)
Flexible discretization technique for DEM-CFD simulations including thin walls
Kazuya Takabatake et al.
ADVANCED POWDER TECHNOLOGY (2020)
Recent Progress on Mesh-free Particle Methods for Simulations of Multi-phase Flows: A Review
Mikio Sakai et al.
KONA POWDER AND PARTICLE JOURNAL (2020)
Phase-Field Simulation of the Coalescence of Droplets Permeating through a Fibrous Filter Obtained from X-ray Computed Tomography Images: Effect of the Filter Microstructure
Masaki Ueda et al.
LANGMUIR (2020)
On artificial density treatment for the pressure Poisson equation in the DEM-CFD simulations
Yuki Mori et al.
POWDER TECHNOLOGY (2020)
Validation study on a scaling law model of the DEM in industrial gas-solid flows
Yuki Mori et al.
POWDER TECHNOLOGY (2019)
A continuous-flow exposure method to determine degradation of polyphenylene sulfide non-woven bag-filter media by NO2 gas at high temperature
Mohammad Irwan Fatkhur Rozy et al.
ADVANCED POWDER TECHNOLOGY (2019)
Numerical investigation on the influence of air flow in a die filling process
Huaqin Yao et al.
JOURNAL OF THE TAIWAN INSTITUTE OF CHEMICAL ENGINEERS (2018)
Lattice-Boltzmann flow simulation of an oil-in-water emulsion through a coalescing filter: Effects of filter structure
Yasushi Mino et al.
CHEMICAL ENGINEERING SCIENCE (2018)
Simulations of particulate flow passing through membrane pore under dead-end and constant-pressure filtration condition
Yasushi Mino et al.
CHEMICAL ENGINEERING SCIENCE (2018)
Filtration of micro-particles within multi-fiber arrays by adhesive DEM-CFD simulation
Ran Tao et al.
JOURNAL OF ZHEJIANG UNIVERSITY-SCIENCE A (2018)
Immersed Boundary Method with Artificial Density in Pressure Equation for Modeling Flows Confined by Wall Boundaries
Xiaosong Sun et al.
JOURNAL OF CHEMICAL ENGINEERING OF JAPAN (2017)
Curve and Surface Smoothing Using a Modified Cahn-Hilliard Equation
Yongho Choi et al.
MATHEMATICAL PROBLEMS IN ENGINEERING (2017)
Evaluation of the can velocity effect on a bag filter
Yun-Haeng Joe et al.
POWDER TECHNOLOGY (2017)
Effect of internal mass in the lattice Boltzmann simulation of moving solid bodies by the smoothed-profile method
Yasushi Mino et al.
PHYSICAL REVIEW E (2017)
Permeation of Oil-in-Water Emulsions Through Coalescing Filter: Two-Dimensional Simulation Based on Phase-Field Model
Yasushi Mino et al.
AICHE JOURNAL (2016)
Numerical simulation of two-phase flows in complex geometries by using the volume-of-fluid/immersed-boundary method
Xiaosong Sun et al.
CHEMICAL ENGINEERING SCIENCE (2016)
Numerical simulation of the filtration process in fibrous filters using CFD-DEM method
Chang Yue et al.
JOURNAL OF AEROSOL SCIENCE (2016)
Numerical study of the mixing efficiency of a ribbon mixer using the discrete element method
Gytis Basinskas et al.
POWDER TECHNOLOGY (2016)
Discrete element simulation for the evaluation of solid mixing in an industrial blender
Mikio Sakai et al.
CHEMICAL ENGINEERING JOURNAL (2015)
Numerical simulation of industrial die filling using the discrete element method
Yuki Tsunazawa et al.
CHEMICAL ENGINEERING SCIENCE (2015)
Highly efficient filtration of ultrafine dust in baghouse filters using precoat materials
Sascha Schiller et al.
POWDER TECHNOLOGY (2015)
Oxidation degradation of polyphenylene sulfide needle felt at different sulfuric acid dew point temperatures
Weilong Cai et al.
HIGH PERFORMANCE POLYMERS (2015)
Low Reynolds number drag and particle collision efficiency of a cylindrical fiber within a parallel array
Thilo Mueller et al.
JOURNAL OF AEROSOL SCIENCE (2014)
Downstream particle puffs emitted during pulse-jet cleaning of a baghouse wood dust collector: Influence of operating conditions and filter surface treatment
Xavier Simon et al.
POWDER TECHNOLOGY (2014)
Investigation into the parameters of influence on dust cake porosity in hot gas filtration
M. Lupion et al.
POWDER TECHNOLOGY (2014)
Permeation of concentrated oil-in-water emulsions through a membrane pore: numerical simulation using a coupled level set and the volume-of-fluid method
Yusuke Kagawa et al.
SOFT MATTER (2014)
Arbitrary-shaped wall boundary modeling based on signed distance functions for granular flow simulations
Yusuke Shigeto et al.
CHEMICAL ENGINEERING JOURNAL (2013)
Permeation of Dispersed Particles through a Pore and Transmernbrane Pressure Behavior in Dead-End Constant-Flux Microfiltration by Two-Dimensional Direct Numerical Simulation
Toni Ishigami et al.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2013)
Effect of 3D fiber orientation distribution on particle capture efficiency of anisotropic fiber networks
Arun Kumar Pradhan et al.
POWDER TECHNOLOGY (2013)
Study on a large-scale discrete element model for fine particles in a fluidized bed
Mikio Sakai et al.
ADVANCED POWDER TECHNOLOGY (2012)
Simulation of fouling and backwash dynamics in dead-end microfiltration: Effect of pore size
Tsutomu Ando et al.
JOURNAL OF MEMBRANE SCIENCE (2012)
Numerical simulation of particle capture process of fibrous filters using Lattice Boltzmann two-phase flow model
Haoming Wang et al.
POWDER TECHNOLOGY (2012)
Influence of operating parameters on cake formation in pilot scale pulse-jet bag filter
Mahmood Saleem et al.
POWDER TECHNOLOGY (2012)
Experimental study of cake formation on heat treated and membrane coated needle felts in a pilot scale pulse jet bag filter using optical in-situ cake height measurement
Mahmood Saleem et al.
POWDER TECHNOLOGY (2011)
Influence of fiber orientation distribution on performance of aerosol filtration media
S. Fotovati et al.
CHEMICAL ENGINEERING SCIENCE (2010)
3-D simulation of particle filtration in electrospun nanofibrous filters
S. A. Hosseini et al.
POWDER TECHNOLOGY (2010)
A coupled level set and volume-of-fluid method for sharp interface simulation of plunging breaking waves
Zhaoyuan Wang et al.
INTERNATIONAL JOURNAL OF MULTIPHASE FLOW (2009)
Collection efficiency of fiber filters operating on the removal of nano-sized aerosol particles: I - Homogeneous fibers
J. Steffens et al.
SEPARATION AND PURIFICATION TECHNOLOGY (2007)
Effect of filtration velocity and dust concentration on cake formation and filter operation in a pilot scale jet pulsed bag filter
Mahmood Saleem et al.
JOURNAL OF HAZARDOUS MATERIALS (2007)
Degradation of semi-crystalline PPS bag-filter materials by NO and O2 at high temperature
Winyu Tanthapanichakoon et al.
POLYMER DEGRADATION AND STABILITY (2006)
Numerical method for interaction between multiparticle and complex structures
K Yokoi
PHYSICAL REVIEW E (2005)
Simulation method to resolve hydrodynamic interactions in colloidal dispersions
Y Nakayama et al.
PHYSICAL REVIEW E (2005)
Estimating curvature from volume fractions
SJ Cummins et al.
COMPUTERS & STRUCTURES (2005)
The effect of the flow field recalculation on fibrous filter loading: a numerical simulation
A Karadimos et al.
POWDER TECHNOLOGY (2003)
Comparison of DEM and experiment for a scale model SAG mill
PW Cleary et al.
INTERNATIONAL JOURNAL OF MINERAL PROCESSING (2003)
Turbulence structure of particle-laden flow in a vertical plane channel due to vortex shedding
T Kajishima et al.
JSME INTERNATIONAL JOURNAL SERIES B-FLUIDS AND THERMAL ENGINEERING (2001)
分享论文
