相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。Thermal Properties of Natural Fiber Sisal Based Hybrid Composites - A Brief Review
Arumugaprabu Veerasimman et al.
JOURNAL OF NATURAL FIBERS (2022)
Fatigue behaviour of FDM-3D printed polymers, polymeric composites and architected cellular materials
Vigneshwaran Shanmugam et al.
INTERNATIONAL JOURNAL OF FATIGUE (2021)
Structure and Properties of Multi-walled Carbon Nanotube/Acrylonitrile Butadiene Styrene Nanocomposite Specimens Prepared by Fused Deposition Modeling
Biao Wang et al.
JOURNAL OF MACROMOLECULAR SCIENCE PART B-PHYSICS (2021)
Optimisation of Mechanical Properties in Saw-Dust/Woven-Jute Fibre/Polyester Structural Composites under Liquid Nitrogen Environment Using Response Surface Methodology
Velmurugan Ganesan et al.
POLYMERS (2021)
Investigation of Dynamic, Mechanical, and Thermal Properties of Calotropis procera Particle-Reinforced PLA Biocomposites
K. Yoganandam et al.
ADVANCES IN MATERIALS SCIENCE AND ENGINEERING (2021)
State of art on fusion deposition modeling machines process parameter optimization on composite materials
Madheswaran Subramaniyan et al.
MATERIALS TODAY-PROCEEDINGS (2021)
A review on the various processing parameters in FDM
I. John Solomon et al.
MATERIALS TODAY-PROCEEDINGS (2021)
A critical review on 3D printed continuous fiber-reinforced composites: History, mechanism, materials and properties
S. M. Fijul Kabir et al.
COMPOSITE STRUCTURES (2020)
Fused deposition modelling: a review
Swapnil Vyavahare et al.
RAPID PROTOTYPING JOURNAL (2020)
Effects of the infill pattern on mechanical properties of fused layer modeling (FLM) 3D printed wood/polylactic acid (PLA) composites
S. Kain et al.
EUROPEAN JOURNAL OF WOOD AND WOOD PRODUCTS (2020)
Sustainability and environmental impact of fused deposition modelling (FDM) technologies
Luis Suarez et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2020)
3D printing biocompatible l-Arg/GNPs/PLA nanocomposites with enhanced mechanical property and thermal stability
Yanen Wang et al.
JOURNAL OF MATERIALS SCIENCE (2020)
A review on advancements in applications of fused deposition modelling process
T. Sathies et al.
RAPID PROTOTYPING JOURNAL (2020)
Fused Deposition Modeling of Poly (lactic acid)/Macadamia Composites-Thermal, Mechanical Properties and Scaffolds
Xiaohui Song et al.
MATERIALS (2020)
Investigation of a Short Carbon Fibre-Reinforced Polyamide and Comparison of Two Manufacturing Processes: Fused Deposition Modelling (FDM) and Polymer Injection Moulding (PIM)
Elena Verdejo de Toro et al.
MATERIALS (2020)
Mechanical characteristics of oil palm fiber reinforced thermoplastics as filament for fused deposition modeling (FDM)
Mohd Nazri Ahmad et al.
ADVANCES IN MANUFACTURING (2020)
An additive manufacturing-based approach for carbon fiber reinforced polymer recycling
Haihong Huang et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2020)
3D printed continuous CF/PA6 composites: Effect of microscopic voids on mechanical performance
Qinghao He et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2020)
The compressive behaviour of ABS gyroid lattice structures manufactured by fused deposition modelling
Tobias Maconachie et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2020)
Tensile performance of additively manufactured short carbon fibre-PLA composites: neural networking and GA for prediction and optimisation
Rachit Omer et al.
PLASTICS RUBBER AND COMPOSITES (2020)
Sustainable Additive Manufacturing: Mechanical Response of Acrylonitrile-Butadiene-Styrene over Multiple Recycling Processes
Nectarios Vidakis et al.
SUSTAINABILITY (2020)
Cellulose Nanofibrils Filled Poly(Lactic Acid) Biocomposite Filament for FDM 3D Printing
Qianqian Wang et al.
MOLECULES (2020)
Recent Progress on Polymer Materials for Additive Manufacturing
Lisa Jiaying Tan et al.
ADVANCED FUNCTIONAL MATERIALS (2020)
Assessment of 3D printing using fused deposition modeling and selective laser sintering for a circular economy
K. DePalma et al.
JOURNAL OF CLEANER PRODUCTION (2020)
Plastic recycling in additive manufacturing: A systematic literature review and opportunities for the circular economy
Fabio A. Cruz Sanchez et al.
JOURNAL OF CLEANER PRODUCTION (2020)
Mechanical characterisation of a bamboo fibre/polylactic acid composite produced by fused deposition modelling
July A. Taborda-Rios et al.
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2020)
Preparation of short CF/GF reinforced PEEK composite filaments and their comprehensive properties evaluation for FDM-3D printing
Peng Wang et al.
COMPOSITES PART B-ENGINEERING (2020)
Recent developments in polymers/polymer nanocomposites for additive manufacturing
H. Wu et al.
PROGRESS IN MATERIALS SCIENCE (2020)
Morphology and Mechanical Properties of 3D Printed Wood Fiber/Polylactic Acid Composite Parts Using Fused Deposition Modeling (FDM): The Effects of Printing Speed
Teng-Chun Yang et al.
POLYMERS (2020)
FDM-Based 3D Printing of Polymer and Associated Composite: A Review on Mechanical Properties, Defects and Treatments
Sachini Wickramasinghe et al.
POLYMERS (2020)
Mechanical Properties of 3D-Printed Acrylonitrile-Butadiene-Styrene TiO2and ATO Nanocomposites
Nectarios Vidakis et al.
POLYMERS (2020)
On the difference in material structure and fatigue properties of polyamide specimens produced by fused filament fabrication and selective laser sintering
S. Terekhina et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2020)
Implementing FDM 3D Printing Strategies Using Natural Fibers to Produce Biomass Composite
Waleed Ahmed et al.
MATERIALS (2020)
Facile and scalable fabrication of highly thermal conductive polyethylene/graphene nanocomposites by combining solid-state shear milling and FDM 3D-printing aligning methods
Jingjing Jing et al.
CHEMICAL ENGINEERING JOURNAL (2020)
Recent advancement in the natural fiber polymer composites: A comprehensive review
S. Vigneshwaran et al.
JOURNAL OF CLEANER PRODUCTION (2020)
Assessment of the Piezoelectric Response of an Epoxy Resin/SbSINanowires Composite Filling FDM Printed Grid
Mateusz Koziol et al.
MATERIALS (2020)
Recycled Polypropylene Filament for 3D Printer: Extrusion Process Parameter Optimization
Herianto et al.
3RD INTERNATIONAL CONFERENCE ON ENGINEERING TECHNOLOGY FOR SUSTAINABLE DEVELOPMENT (ICET4SD) (2020)
Fabrication and Characterization of Hemp Fibre Based 3D Printed Honeycomb Sandwich Structure by FDM Process
Sheedev Antony et al.
APPLIED COMPOSITE MATERIALS (2020)
Properties of ABS/Organic-Attapulgite Nanocomposites Parts Fabricated by Fused Deposition Modeling
Ling Wang et al.
JOURNAL OF RENEWABLE MATERIALS (2020)
Uncertainty and Variability of Energy and Material Use by Fused Deposition Modeling Printers in Makerspaces
Ruoyu Song et al.
JOURNAL OF INDUSTRIAL ECOLOGY (2019)
Characterization of natural fibre-embedded biodegradable porous structures prepared with fused deposition process
Amarveer Singh Mangat et al.
JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS (2019)
A critical review of fused deposition modeling 3D printing technology in manufacturing polylactic acid parts
Zengguang Liu et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2019)
Preparation of polypropylene/short glass fiber composite as Fused Deposition Modeling (FDM) filament
Gholamhossein Sodeifian et al.
RESULTS IN PHYSICS (2019)
Development of short basalt fiber reinforced polylactide composites and their feasible evaluation for 3D printing applications
Lin Sang et al.
COMPOSITES PART B-ENGINEERING (2019)
3D printing of polyether-ether-ketone for biomedical applications
Sunpreet Singh et al.
EUROPEAN POLYMER JOURNAL (2019)
Recent Developments in Fused Deposition Modeling-Based 3D Printing of Polymers and Their Composites
Tuan Noraihan Azila Tuan Rahim et al.
POLYMER REVIEWS (2019)
A wear model for subrough surface contacts of martensitic steels
Anatoliy G. Suslov et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY (2019)
Carbon Fiber Reinforced PEEK Composites Based on 3D-Printing Technology for Orthopedic and Dental Applications
Xingting Han et al.
JOURNAL OF CLINICAL MEDICINE (2019)
Fused deposition modeling with polyamide 1012
Xia Gao et al.
RAPID PROTOTYPING JOURNAL (2019)
FDM 3D Printing of Polymers Containing Natural Fillers: A Review of their Mechanical Properties
Valentina Mazzanti et al.
POLYMERS (2019)
Additive manufacturing of continuous fibre reinforced thermoplastic composites using fused deposition modelling: Effect of process parameters on mechanical properties
J. M. Chacon et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2019)
Exploring mechanical properties of fully compostable flax reinforced composite filaments for 3D printing applications
Celine Badouard et al.
INDUSTRIAL CROPS AND PRODUCTS (2019)
Mechanical characterization of FDM 3D printing of continuous carbon fiber reinforced PLA composites
M. Heidari-Rarani et al.
COMPOSITES PART B-ENGINEERING (2019)
Polylactide/hemp hurd biocomposites as sustainable 3D printing feedstock
Xianglian Xiao et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2019)
Optimization of process planning for reducing material waste in extrusion based additive manufacturing
Jingchao Jiang et al.
ROBOTICS AND COMPUTER-INTEGRATED MANUFACTURING (2019)
3D Printing of Ultrahigh Strength Continuous Carbon Fiber Composites
Pedram Parandoush et al.
ADVANCED ENGINEERING MATERIALS (2019)
3D printing of continuous flax fibre reinforced biocomposites for structural applications
A. Le Duigou et al.
MATERIALS & DESIGN (2019)
Improving mechanical performance of fused deposition modeling lattice structures by a snap-fitting method
Wenfeng Liu et al.
MATERIALS & DESIGN (2019)
Effect of Vertical Strut Arrangements on Compression Characteristics of 3D Printed Polymer Lattice Structures: Experimental and Computational Study
Abdalsalam Fadeel et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2019)
Improving mechanical properties of continuous fiber-reinforced thermoplastic composites produced by FDM 3D printer
Behnam Akhoundi et al.
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2019)
Three-dimensional printing of poly(lactic acid) bio-based composites with sugarcane bagasse fiber: Effect of printing orientation on tensile performance
Hao Liu et al.
POLYMERS FOR ADVANCED TECHNOLOGIES (2019)
FDM 3D printing of MWCNT re-inforced ABS nano-composite parts with enhanced mechanical and electrical properties
H. Kursad Sezer et al.
JOURNAL OF MANUFACTURING PROCESSES (2019)
Enhancing the interlayer tensile strength of 3D printed short carbon fiber reinforced PETG and PLA composites via annealing
Sunil Bhandari et al.
ADDITIVE MANUFACTURING (2019)
Mechanical property analysis of biochar derived from cashew nut shell waste reinforced polymer matrix
R. Sundarakannan et al.
MATERIALS RESEARCH EXPRESS (2019)
Recycled polypropylene blends as novel 3D printing materials
Nicole E. Zander et al.
ADDITIVE MANUFACTURING (2019)
Thermal behavior of PC-ABS based graphene filled polymer nanocomposite synthesized by FDM process
Vijay Tambrallimath et al.
COMPOSITES COMMUNICATIONS (2019)
Preparation of poly(vinyl alcohol)/poly(lactic acid)/hydroxyapatite bioactive nanocomposites for fused deposition modeling
Jintian Wu et al.
POLYMER COMPOSITES (2018)
Sustainable composite fused deposition modelling filament using recycled pre-consumer polypropylene
David Stoof et al.
COMPOSITES PART B-ENGINEERING (2018)
Additive manufacturing (3D printing): A review of materials, methods, applications and challenges
Tuan D. Ngo et al.
COMPOSITES PART B-ENGINEERING (2018)
Fused Deposition Modeling (FDM): An innovative technique aimed at reusing Lecce stone waste for industrial design and building applications
Carola Esposito Corcione et al.
CONSTRUCTION AND BUILDING MATERIALS (2018)
Interlaminar bonding performance of 3D printed continuous fibre reinforced thermoplastic composites using fused deposition modelling
M. A. Caminero et al.
POLYMER TESTING (2018)
Preparation and characterization of 3D printed continuous carbon fiber reinforced thermosetting composites
Wenfeng Hao et al.
POLYMER TESTING (2018)
Mechanical properties and water absorption of surface modified ABS 3D printed by fused deposition modelling
Marco Leite et al.
RAPID PROTOTYPING JOURNAL (2018)
Effect of Printing Parameters on Tensile, Dynamic Mechanical, and Thermoelectric Properties of FDM 3D Printed CABS/ZnO Composites
Yah Yun Aw et al.
MATERIALS (2018)
Interlayer adhesion and fracture resistance of polymers printed through melt extrusion additive manufacturing process
Nahal Aliheidari et al.
MATERIALS & DESIGN (2018)
Bio-polyethylene reinforced with thermomechanical pulp fibers: Mechanical and micromechanical characterization and its application in 3D-printing by fused deposition modelling
Q. Tarres et al.
COMPOSITES PART B-ENGINEERING (2018)
Investigation of ABS-rice straw composite feedstock filament for FDM
Mohammed Ali Osman et al.
RAPID PROTOTYPING JOURNAL (2018)
Effect of Extrusion Temperature on the Physico-Mechanical Properties of Unidirectional Wood Fiber-Reinforced Polylactic Acid Composite (WFRPC) Components Using Fused Deposition Modeling
Teng-Chun Yang
POLYMERS (2018)
Transformation of E-Waste Plastics into Sustainable Filaments for 3D Printing
Vaibhav Gaikwad et al.
ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2018)
Evaluation of compressive and flexural properties of continuous fiber fabrication additive manufacturing technology
Miguel Araya-Calvo et al.
ADDITIVE MANUFACTURING (2018)
Effect of wood content in FDM filament on properties of 3D printed parts
Mirko Kariz et al.
MATERIALS TODAY COMMUNICATIONS (2018)
Recycled polyethylene terephthalate as a new FFF feedstock material
Nicole E. Zander et al.
ADDITIVE MANUFACTURING (2018)
Interlayer fracture toughness of additively manufactured unreinforced and carbon-fiber-reinforced acrylonitrile butadiene styrene
Devin Young et al.
ADDITIVE MANUFACTURING (2018)
An investigation into 3D printing of fibre reinforced thermoplastic composites
L. G. Blok et al.
ADDITIVE MANUFACTURING (2018)
Additive manufacturing of carbon fiber-reinforced plastic composites using fused deposition modeling: Effects of process parameters on tensile properties
Fuda Ning et al.
JOURNAL OF COMPOSITE MATERIALS (2017)
Multifunctional properties of 3D printed poly(lactic acid)/graphene nanocomposites by fused deposition modeling
K. Prashantha et al.
JOURNAL OF MACROMOLECULAR SCIENCE PART A-PURE AND APPLIED CHEMISTRY (2017)
Deformation and fatigue of tough 3D printed elastomer scaffolds processed by fused deposition modeling and continuous liquid interface production
Andrew T. Miller et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2017)
Fatigue of injection molded and 3D printed polycarbonate urethane in solution
Andrew T. Miller et al.
POLYMER (2017)
Fracture resistance measurement of fused deposition modeling 3D printed polymers
Nahal Aliheidari et al.
POLYMER TESTING (2017)
Bonding quality and fracture analysis of polyamide 12 parts fabricated by fused deposition modeling
Hao Li et al.
RAPID PROTOTYPING JOURNAL (2017)
Deposition-induced effects of isotactic polypropylene and polycarbonate composites during fused deposition modeling
Ying-Guo Zhou et al.
RAPID PROTOTYPING JOURNAL (2017)
3D printing for continuous fiber reinforced thermoplastic composites: mechanism and performance
Chuncheng Yang et al.
RAPID PROTOTYPING JOURNAL (2017)
Electrically conductive nanocomposites for fused deposition modelling
A. Dorigato et al.
SYNTHETIC METALS (2017)
3D printed highly elastic strain sensors of multiwalled carbon nanotube/thermoplastic polyurethane nanocomposites
Josef F. Christ et al.
MATERIALS & DESIGN (2017)
Additive manufacturing of PLA structures using fused deposition modelling: Effect of process parameters on mechanical properties and their optimal selection
J. M. Chacon et al.
MATERIALS & DESIGN (2017)
A review on composite materials and process parameters optimisation for the fused deposition modelling process
N. Mohan et al.
VIRTUAL AND PHYSICAL PROTOTYPING (2017)
Fused Deposition Modelling of Natural Fibre/Polylactic Acid Composites
David Stoof et al.
JOURNAL OF COMPOSITES SCIENCE (2017)
Characterizing the Mechanical Properties of Fused Deposition Modelling Natural Fiber Recycled Polypropylene Composites
M. Milosevic et al.
JOURNAL OF COMPOSITES SCIENCE (2017)
Fabrication of continuous carbon, glass and Kevlar fibre reinforced polymer composites using additive manufacturing
Andrew N. Dickson et al.
ADDITIVE MANUFACTURING (2017)
Influence of meso-structure and chemical composition on FDM 3D-printed parts
Gianluca Alaimo et al.
COMPOSITES PART B-ENGINEERING (2017)
Investigation of the adhesion properties of direct 3D printing of polymers and nanocomposites on textiles: Effect of FDM printing process parameters
Razieh Hashemi Sanatgar et al.
APPLIED SURFACE SCIENCE (2017)
Development and Application of Wood Flour-Filled Polylactic Acid Composite Filament for 3D Printing
Yubo Tao et al.
MATERIALS (2017)
3D Printing Biocompatible Polyurethane/Poly(lactic acid)/Graphene Oxide Nanocomposites: Anisotropic Properties
Qiyi Chen et al.
ACS APPLIED MATERIALS & INTERFACES (2017)
Additive manufacturing technologies: state of the art and trends
Julien Gardan
INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH (2016)
Fused deposition modelling with ABS-graphene nanocomposites
Sithiprumnea Dul et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2016)
Effect of single particle size, double particle size and triple particle size Al2O3 in Nylon-6 matrix on mechanical properties of feed stock filament for FDM
Rupinder Singh et al.
COMPOSITES PART B-ENGINEERING (2016)
Rapid prototyping of continuous carbon fiber reinforced polylactic acid composites by 3D printing
Nanya Li et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2016)
Wear behavior of FDM parts fabricated by composite material feed stock filament
Kamaljit Singh Boparai et al.
RAPID PROTOTYPING JOURNAL (2016)
Development of rapid tooling using fused deposition modeling: a review
Kamaljit Singh Boparai et al.
RAPID PROTOTYPING JOURNAL (2016)
Mechanical and thermal properties of ABS/montmorillonite nanocomposites for fused deposition modeling 3D printing
Zixiang Weng et al.
MATERIALS & DESIGN (2016)
3D printing of wood fibre biocomposites: From mechanical to actuation functionality
A. Le Duigou et al.
MATERIALS & DESIGN (2016)
Three-dimensional printing of continuous-fiber composites by in-nozzle impregnation
Ryosuke Matsuzaki et al.
SCIENTIFIC REPORTS (2016)
Experimental investigations on fused deposition modelling of polymer-layered silicate nanocomposite
Vishal Francis et al.
VIRTUAL AND PHYSICAL PROTOTYPING (2016)
Additive manufacturing of carbon fiber reinforced thermoplastic composites using fused deposition modeling
Fuda Ning et al.
COMPOSITES PART B-ENGINEERING (2015)
Evaluation of dimensional accuracy and material properties of the MakerBot 3D desktop printer
Garrett W. Melenka et al.
RAPID PROTOTYPING JOURNAL (2015)
A review of melt extrusion additive manufacturing processes: II. Materials, dimensional accuracy, and surface roughness
Brian N. Turner et al.
RAPID PROTOTYPING JOURNAL (2015)
Influence of Layer Thickness and Raster Angle on the Mechanical Properties of 3D-Printed PEEK and a Comparative Mechanical Study between PEEK and ABS
Wenzheng Wu et al.
MATERIALS (2015)
Optimization of fused deposition modeling process parameters: a review of current research and future prospects
Omar A. Mohamed et al.
ADVANCES IN MANUFACTURING (2015)
Thermo-mechanical Characterization of Metal/Polymer Composite Filaments and Printing Parameter Study for Fused Deposition Modeling in the 3D Printing Process
Seyeon Hwang et al.
JOURNAL OF ELECTRONIC MATERIALS (2015)
Highly oriented carbon fiber-polymer composites via additive manufacturing
Halil L. Tekinalp et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2014)
A review of melt extrusion additive manufacturing processes: I. Process design and modeling
Brian N. Turner et al.
RAPID PROTOTYPING JOURNAL (2014)
Critical factors on manufacturing processes of natural fibre composites
Mei-po Ho et al.
COMPOSITES PART B-ENGINEERING (2012)
Effect of processing conditions on the bonding quality of FDM polymer filaments
Q. Sun et al.
RAPID PROTOTYPING JOURNAL (2008)
Thermal characteristics of a new metal/polymer material for FDM rapid prototyping process
SH Masood et al.
ASSEMBLY AUTOMATION (2005)
Development of new metal/polymer materials for rapid tooling using Fused deposition modelling
SH Masood et al.
MATERIALS & DESIGN (2004)