相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。Functionalized Elastomeric Ionomers Used as Effective Toughening Agents for Poly(lactic acid): Enhancement in Interfacial Adhesion and Mechanical Performance
Dong Huang et al.
ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2020)
Strong and Tough Polylactic Acid Based Composites Enabled by Simultaneous Reinforcement and Interfacial Compatibilization of Microfibrillated Cellulose
Lu He et al.
ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2020)
Synergy effect between quaternary phosphonium ionic liquid and ammonium polyphosphate toward flame retardant PLA with improved toughness
Yun-Wan Jia et al.
COMPOSITES PART B-ENGINEERING (2020)
What Determines the Glass Temperature and dc-Conductivity in Imidazolium-Polymerized Ionic Liquids with a Polythiophene Backbone?
Achilleas Pipertzis et al.
MACROMOLECULES (2020)
Supertough and Transparent Poly(lactic acid) Nanostructure Blends with Minimal Stiffness Loss
Zhaoxin Li et al.
ACS OMEGA (2020)
Refractive Index Engineering as a Novel Strategy toward Highly Transparent and Tough Sustainable Polymer Blends
Si-Ting Sun et al.
CHINESE JOURNAL OF POLYMER SCIENCE (2020)
Supertough Poly(lactic acid) and Sustainable Elastomer Blends Compatibilized by PLLA-b-PMMA Block Copolymers as Effective A-b-C-Type Compatibilizers
Hai Jiang et al.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2020)
Crazing Mechanism and Physical Aging of Poly(lactide) Toughened with Poly(ethylene oxide)-block-poly(butylene oxide) Diblock Copolymers
Charles J. McCutcheon et al.
MACROMOLECULES (2020)
Poly (lactic acid) blends: Processing, properties and applications
Mohammadreza Nofar et al.
INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2019)
Hierarchical Sticker and Sticky Chain Dynamics in Self-Healing Butyl Rubber lonomers
Anton Mordvinkin et al.
MACROMOLECULES (2019)
Enhancing Impact Toughness of Renewable Poly(lactic acid)/Thermoplastic Polyurethane Blends via Constructing Cocontinuous-like Phase Morphology Assisted by Ethylene-Methyl Acrylate-Glycidyl Methacrylate Copolymer
Wangyang Lin et al.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2019)
Density, sound velocity, viscosity, and refractive index of new morpholinium ionic liquids with amino acid-based anions: Effect of temperature, alkyl chain length, and anion
Lukasz Marcinkowski et al.
JOURNAL OF MOLECULAR LIQUIDS (2019)
Engineering Styrenic Blends with Poly(lactic acid)
Xianghao Zuo et al.
MACROMOLECULES (2019)
Toughening Biosourced Poly(lactic acid) and Poly(3-hydroxybutyrate-co-4-hydroxybutyrate) Blends by a Renewable Poly(epichlorohydrin-co-ethylene oxide) Elastomer
Kuan Hu et al.
ACS OMEGA (2019)
Transparent polymer nanocomposites: An overview on their synthesis and advanced properties
Julien Loste et al.
PROGRESS IN POLYMER SCIENCE (2019)
Reactive splicing compatibilization of immiscible polymer blends: Compatibilizer synthesis in the melt state and compatibilizer architecture effects
Bin Wei et al.
POLYMER (2019)
Graft ratio: Quantitative measurement and direct evidence for its blending sequence dependence during reactive compatibilization in PVDF/PLLA
Fei Li et al.
POLYMER (2019)
Compatibilization of Polyester/Polyamide Blends with a Phosphonated Poly(ethylene terephthalate) lonomer: Comparison of Monovalent and Divalent Pendant Ions
Lin Ju et al.
ACS APPLIED POLYMER MATERIALS (2019)
Refractive Index Tuning of Hybrid Materials for Highly Transmissive Luminescent Lanthanide Particle-Polymer Composites
Paul Kim et al.
ACS APPLIED MATERIALS & INTERFACES (2018)
Toughening Poly(lactic acid) with Imidazolium-based Elastomeric Ionomers
Lu Chen et al.
CHINESE JOURNAL OF POLYMER SCIENCE (2018)
Enhancing Impact Resistance of Polymer Blends via Self-Assembled Nanoscale Interfacial Structures
Yichen Guo et al.
MACROMOLECULES (2018)
Highly-Toughened Polylactide- (PLA-) Based Ternary Blends with Significantly Enhanced Glass Transition and Melt Strength: Tailoring the Interfacial Interactions, Phase Morphology, and Performance
Majid Mehrabi Mazidi et al.
MACROMOLECULES (2018)
High Refractive Index Polymers by Design
Thorben Badur et al.
MACROMOLECULES (2018)
Relating Chemical Structure to Toughness via Morphology Control in Fully Sustainable Sebacic Acid Cured Epoxidized Soybean Oil Toughened Polylactide Blends
Tong-Hui Zhao et al.
MACROMOLECULES (2018)
Syntheses, characterizations and functions of cationic polyethers with imidazolium-based ionic liquid moieties
Shigetaka Hayano et al.
POLYMER CHEMISTRY (2018)
Bio-Based PLA/NR-PMMA/NR Ternary Thermoplastic Vulcanizates with Balanced Stiffness and Toughness: Soft-Hard Core-Shell Continuous Rubber Phase, In Situ Compatibilization, and Properties
Yukun Chen et al.
ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2018)
Toughening poly(lactic acid) with poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide) triblock copolymers
Liangliang Gu et al.
POLYMER (2018)
A Facile Fabrication of High Toughness Poly(lactic Acid) via Reactive Extrusion with Poly(butylene Succinate) and Ethylene-Methyl Acrylate-Glycidyl Methacrylate
Bin Xue et al.
POLYMERS (2018)
Improved processability and performance of biomedical devices with poly(lactic acid)/poly(ethylene glycol) blends
Jianming Zhang et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2017)
High performance poly (lactic acid)/bio-polyamide11 through controlled chain mobility
Vahid Heshmati et al.
POLYMER (2017)
Progress in Toughening Poly(Lactic Acid) with Renewable Polymers
Ming Wang et al.
POLYMER REVIEWS (2017)
Fabrication of gelatin-poly(epichlorohydrin-co-ethylene oxide) fiber scaffolds by Forcespinning® for tissue engineering and drug release
Narsimha Mamidi et al.
MRS COMMUNICATIONS (2017)
Novel imidazolium-based poly(ionic liquid)s with different counterions for self-healing
Jing Cui et al.
JOURNAL OF MATERIALS CHEMISTRY A (2017)
Transparent and High Refractive Index Thermoplastic Polymer Glasses Using Evaporative Ligand Exchange of Hybrid Particle Fillers
Zongyu Wang et al.
ACS APPLIED MATERIALS & INTERFACES (2017)
Isobutylene-rich imidazolium ionomers for use in two-phase partitioning bioreactors
Stuart L. Bacon et al.
GREEN CHEMISTRY (2016)
Perspective on Polylactic Acid (PLA) based Sustainable Materials for Durable Applications: Focus on Toughness and Heat Resistance
Vidhya Nagarajan et al.
ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2016)
Morphological, Mechanical, and Crystallization Behavior of Polylactide/Polycaprolactone Blends Compatibilized by L-Lactide/Caprolactone Copolymer
Chunmei Zhang et al.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2015)
Tensile Properties of Polylactide/Poly(ethylene glycol) Blends
Feng-Jiao Li et al.
JOURNAL OF POLYMERS AND THE ENVIRONMENT (2015)
Incorporating Pendent Fullerenes with High Refractive Index Backbones: A Conjunction Effect Method for High Refractive Index Polymers
Shuang Chen et al.
MACROMOLECULES (2015)
Two Step Extrusion Process: From Thermal Recycling of PHB to Plasticized PLA by Reactive Extrusion Grafting of PHB Degradation Products onto PLA Chains
Xi Yang et al.
MACROMOLECULES (2015)
Recent Progress in High Refractive Index Polymers
Tomoya Higashihara et al.
MACROMOLECULES (2015)
Effect of polyethylene glycol on the crystallization and impact properties of polylactide-based blends
Feng-Jiao Li et al.
POLYMERS FOR ADVANCED TECHNOLOGIES (2015)
Phosphonium ionic liquids as new compatibilizing agents of biopolymer blends composed of poly(butylene-adipate-co-terephtalate)/poly(lactic acid) (PBAT/PLA)
Luanda C. Lins et al.
RSC ADVANCES (2015)
Supertoughened Renewable PLA Reactive Multiphase Blends System: Phase Morphology and Performance
Kunyu Zhang et al.
ACS APPLIED MATERIALS & INTERFACES (2014)
Different Insight into Amphiphilic PEG-PLA Copolymers: Influence of Macromolecular Architecture on the Micelle Formation and Cellular Uptake
Cinzia Garofalo et al.
BIOMACROMOLECULES (2014)
Low Glass Transition Temperature Polymer Electrolyte Prepared From Ionic Liquid Grafted Polyethylene Oxide
Heyi Hu et al.
JOURNAL OF POLYMER SCIENCE PART A-POLYMER CHEMISTRY (2014)
Characterization of Network Structure and Chain Dynamics of Elastomeric Ionomers by Means of 1H Low-Field NMR
M. A. Malmierca et al.
MACROMOLECULES (2014)
Toughened Sustainable Green Composites from Poly(3-hydroxybutyrate-co-3-hydroxyvalerate) Based Ternary Blends and Miscanthus Biofiber
Kunyu Zhang et al.
ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2014)
Toughening of Biodegradable Polylactide/Poly(butylene succinate-co-adipate) Blends via in Situ Reactive Compatibilization
Vincent Ojijo et al.
ACS APPLIED MATERIALS & INTERFACES (2013)
Imidazole Polymers Derived from Ionic Liquid 4-Vinylimidazolium Monomers: Their Synthesis and Thermal and Dielectric Properties
Thomas W. Smith et al.
MACROMOLECULES (2013)
Tunable morphologies for ternary blends with poly(butylene succinate): Partial and complete wetting phenomena
Sepehr Ravati et al.
POLYMER (2013)
Polyester-Grafted Cellulose Nanowhiskers: A New Approach for Tuning the Microstructure of Immiscible Polyester Blends
Anne-Lise Goffin et al.
ACS APPLIED MATERIALS & INTERFACES (2012)
Fully Biodegradable and Biorenewable Ternary Blends from Polylactide, Poly(3-hydroxybutyrate-co-hydroxyvalerate) and Poly(butylene succinate) with Balanced Properties
Kunyu Zhang et al.
ACS APPLIED MATERIALS & INTERFACES (2012)
Interaction of Microstructure and Interfacial Adhesion on Impact Performance of Polylactide (PLA) Ternary Blends
Hongzhi Liu et al.
MACROMOLECULES (2011)
Novel Self-Assembling Close-Packed Droplet Array at the Interface in Ternary Polymer Blends
Nick Virgilio et al.
MACROMOLECULES (2009)
Two calorimetric glass transitions in miscible blends containing poly(ethylene oxide)
Ashish N. Gaikwad et al.
MACROMOLECULES (2008)
Mechanical, thermal and degradation properties of poly(d,l-lactide)/poly(hydroxybutyrate-co-hydroxyvalerate)/poly(ethylene glycol) blend
Shuai Wang et al.
POLYMER DEGRADATION AND STABILITY (2008)
Study of hydrogen-bonded blend of polylactide with biodegradable hyperbranched poly(ester amide)
Ying Lin et al.
MACROMOLECULES (2007)
Study of morphologies of PMMA/PP/PS ternary blends
TS Valera et al.
MACROMOLECULES (2006)
Synthesis of novel polycations using the chemistry of ionic liquids
R Marcilla et al.
MACROMOLECULAR CHEMISTRY AND PHYSICS (2005)
Thermal and mechanical properties of plasticized poly(L-lactic acid)
M Baiardo et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2003)
分享论文
