Experimental study on the parameter optimization and application of a packed-bed dielectric barrier discharge reactor in diesel particulate filter regeneration

To compensate for the shortcomings of the thermal and catalytic regeneration of the diesel particulate filter (DPF), a self-designed packed-bed dielectric barrier discharge (DBD) reactor for DPF regeneration was developed. The DBD reactor with the main active substance of nonthermal plasma (NTP) as the target parameter was optimized by adjusting the feed gas, packing particles (material or size), and cooling water temperature. Moreover, a set of optimal working parameters (gas source, O-2; packing particles, 1.2-1.4 mm ZrO2; and cooling water temperature, 20 degrees C) was selected to evaluate the effect of different O-3 concentrations on DPF regeneration. The research results showed that selecting packing particles with high dielectric constant and large particles, as well as reducing the cooling water temperature, with oxygen as the feed gas, contributed to an increase in O-3 concentration. During DPF regeneration, the following changes were observed: the power of the NTP reactor decreased to lower than 100 W, the O-3 concentration increased from 15 g m(-3) to 45 g m(-3), the CO and CO2 volume fractions of the particulate matter decomposition products increased, and the peak regeneration temperature increased to 173.4 degrees C. The peak temperature arrival time was 60 min earlier, indicating that the regeneration rate of DPF increased with the increase in O-3 concentration. However, the O-3 utilization rate (the amount of carbon deposit removed per unit volume O-3) initially increased and then decreased; when the O-3 concentration was set to 25 g m(-3), the highest O-3 utilization rate was reached. The packed-bed DBD technology contributed to the increase in the concentration of NTP active substances and the regeneration efficiency of DPF. It provides a theoretical and experimental basis for high-efficiency regeneration of DPF at low temperatures (<200 degrees C).

Automated summary

Optimizing the packed-bed dielectric barrier discharge (DBD) technology can effectively increase the concentration of nonthermal plasma (NTP) active substances, thereby improving the regeneration efficiency of the diesel particulate filter (DPF). In addition, selecting the appropriate operating parameters and increasing the oxygen concentration can accelerate the regeneration process of DPF.