4.6 Article

Improving the Antimicrobial and Mechanical Properties of Epoxy Resins via Nanomodification: An Overview

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Chemistry, Physical

Visco-Elastic, Thermal, Antimicrobial and Dielectric Behaviour of Areca Fibre-Reinforced Nano-silica and Neem Oil-Toughened Epoxy Resin Bio Composite

J. Ben Samuel et al.

Summary: This study developed epoxy bio composites using areca fiber, nano-silica, and neem oil, enhancing antimicrobial properties and thermal-mechanical strength for applications in food storage, medical components, and domestic appliance manufacturing. The addition of nano-silica particles improved the storage modulus and antimicrobial behavior of the composites, while maintaining electrical insulation properties. The research highlights the potential of these bio composites for various engineering applications.

SILICON (2021)

Article Polymer Science

Unique antimicrobial/thermally conductive polymer composites for use in medical electronic devices

Si-Wei Xiong et al.

Summary: A novel ternary composite with excellent antimicrobial and thermal conductive properties was developed to address the common neglect of bacterial growth and accumulation on polymer-based thermal conductive materials used in medical electronic devices. The composite showed 100% antibacterial effectiveness against Escherichia coli and Staphylococcus aureus, with a thermal conductivity enhancement of about 1141% over pure epoxy. This composite not only enhances antimicrobial properties, but also forms a continuous network for heat conduction in the epoxy.

JOURNAL OF APPLIED POLYMER SCIENCE (2021)

Review Chemistry, Multidisciplinary

Review on Silver Nanoparticles as a Novel Class of Antibacterial Solutions

Corina Michaela Crisan et al.

Summary: Nanomaterials as antibacterial solutions face challenges in terms of synthesis and characterization methods. This study focuses on the application of silver nanoparticles as antibacterial solutions and explores various factors affecting their antimicrobial efficiency.

APPLIED SCIENCES-BASEL (2021)

Review Infectious Diseases

How to Evaluate Non-Growing Cells-Current Strategies for Determining Antimicrobial Resistance of VBNC Bacteria

Susanne Fleischmann et al.

Summary: After bacteria enter the viable but non-culturable (VBNC) state, they show significantly increased tolerance against antimicrobials, posing challenges for researching solutions against their antimicrobial resistance. Various experimental approaches have been developed to detect and quantify VBNCs, but methods for screening antimicrobial resistance are still limited.

ANTIBIOTICS-BASEL (2021)

Review Biochemistry & Molecular Biology

Multimetallic Nanoparticles as Alternative Antimicrobial Agents: Challenges and Perspectives

Nagaraj Basavegowda et al.

Summary: Multimetallic nanoparticles show promising synergistic effects as alternative antimicrobial agents, with their favorable physicochemical properties enabling efficient interaction with bacterial cell membranes to induce and enhance killing potency.

MOLECULES (2021)

Review Chemistry, Physical

New Perspectives of Using Chitosan, Silver, and Chitosan-Silver Nanoparticles against Multidrug-Resistant Bacteria

Marcos A. Polinarski et al.

Summary: Nanomaterials with antimicrobial activity, such as CsNPs and AgNPs, have shown great potential in overcoming microbial resistance in medical devices. The synergistic effect between chitosan and silver in Cs-AgNPs makes them more effective against various microorganisms, including multidrug-resistant bacteria. Various synthesis methods and physicochemical characteristics of these nanoparticles are discussed in this review, highlighting their antimicrobial properties in medical, pharmaceutical, and biotechnological applications.

PARTICLE & PARTICLE SYSTEMS CHARACTERIZATION (2021)

Review Chemistry, Applied

A review on plant extracts as natural additives in coating applications

Gerard Ong et al.

Summary: Coating is a protective layer made from polymer resins that cover and protect the substrate surface. Inorganic additives are commonly used in coating applications to enhance properties, but they contain toxic heavy metals. Research is now focusing on using plant extracts as natural additives due to their non-toxic and environmentally friendly properties.

PROGRESS IN ORGANIC COATINGS (2021)

Article Chemistry, Applied

Multifunctional AgO/epoxy nanocomposites with enhanced mechanical, anticorrosion and bactericidal properties

Wenning Shen et al.

Summary: AgO nanoparticles were mixed with epoxy resin to form multifunctional nanocomposites, showing improved mechanical properties, anticorrosion properties, and antimicrobial properties. The distribution of AgO nanoparticles was uniform at specific loading levels, leading to enhanced performance of the nanocomposites.

PROGRESS IN ORGANIC COATINGS (2021)

Article Engineering, Environmental

Multifunctional fabrics finished using electrosprayed hybrid Janus particles containing nanocatalysts

Jiangsong Hou et al.

Summary: The study involved depositing Janus particles on fabric surface to impart superhydrophobic, UV resistance, and antimicrobial properties. The finished fabric showed significantly increased ultraviolet protection factor and water contact angle, while maintaining gas permeability.

CHEMICAL ENGINEERING JOURNAL (2021)

Article Materials Science, Characterization & Testing

TiO2 antifouling coating based on epoxy-modified tung oil waterborne resin

Hailiang Hu et al.

Summary: The eco-friendly functionalized TiO2/polymer antifouling coating was successfully synthesized and showed effective antimicrobial activity against Staphylococcus aureus, Escherichia coli, and diatom. The nano TiO2/polymer coating exhibited improved fouling resistance properties, with enhanced efficacy against diatom growth and adhesion correlating with an increase in TiO2 content.

POLYMERS & POLYMER COMPOSITES (2021)

Review Chemistry, Multidisciplinary

Nanobiosystems for Antimicrobial Drug-Resistant Infections

Foteini Gkartziou et al.

Summary: The review article focuses on nine leading antimicrobial drug-resistant organisms causing difficult-to-treat infections, discussing bacteriophages and nanosystems developed or used in the last 20 years, highlighting the potential of nano-antimicrobials for the treatment of persistent infections.

NANOMATERIALS (2021)

Review Infectious Diseases

Resistance and Adaptation of Bacteria to Non-Antibiotic Antibacterial Agents: Physical Stressors, Nanoparticles, and Bacteriophages

Sada Raza et al.

Summary: Antimicrobial resistance poses a significant threat to human health globally, leading scientists to explore non-traditional antibacterial agents to combat drug-resistant bacteria. New antibiotic-free approaches are being developed at the intersection of physics, nanotechnology, and microbiology, while the effectiveness of these solutions in the long term remains uncertain.

ANTIBIOTICS-BASEL (2021)

Article Chemistry, Physical

Improving the properties of antifouling hybrid composites: The use of Halloysites as nano-containers in epoxy coatings

Monica Tonelli et al.

Summary: Marine biofouling is a long-standing issue affecting various marine activities, and the development of marine antifouling coatings remains a challenge. A novel antifouling epoxy paint doped with Halloysite clay nanotubes loaded with eco-sustainable antifouling molecules has shown promising results in preventing bacterial attachment, enhancing material antifouling properties, and has potential wide applications in ship hull protection.

COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2021)

Article Chemistry, Applied

Structure-activity relationship of antibacterial bio-based epoxy polymers made from phenolic branched fatty acids

Kun Huang et al.

Summary: The study investigated the structure-activity relationship of antibacterial bio-based epoxy polymers made from phenolic branched fatty acids by preparing curing agents from phenolic BCFAs and polyamines. The bio-epoxy polymers, especially phenol-BCFA (EDA) and creosote BCFA (EDA), demonstrated significant antimicrobial activity against a broad range of bacteria, indicating their potential as inherently antibacterial materials. The study also highlighted the importance of amphiphilicity in contributing to the antimicrobial activity of the bio-epoxy polymers.

PROGRESS IN ORGANIC COATINGS (2021)

Article Chemistry, Applied

Cross-linking of antimicrobial polymers with hexamethylene diamine to prevent biofouling in marine applications

Georgia Ch. Lainioti et al.

Summary: The study prepared antimicrobial polymers with quaternary ammonium compounds and coated them on aquaculture nets, showing high antifouling activity and cleaning efficacy. The modified nets performed well in preventing fouling microorganisms, which were easily removed after high pressure cleaning.

PROGRESS IN ORGANIC COATINGS (2021)

Review Chemistry, Multidisciplinary

Copper as an antimicrobial agent: recent advances

Intisar Salah et al.

Summary: Copper has a long history as an antimicrobial agent, with established mechanisms for its efficacy against microorganisms. Research shows that copper can kill bacteria, viruses, and fungi through various means, but direct comparisons are difficult due to differences in experimental conditions.

RSC ADVANCES (2021)

Review Medicine, General & Internal

Nanoparticles in Endodontics - A Review

Pooja Ghanshyam Chandak et al.

Summary: Nanoparticles play a crucial role in endodontic treatment, contributing to improved oral health, elimination of bacteria, treatment of dentin hypersensitivity, diagnosis and treatment of oral cancers, etc. They possess unique physical and chemical properties and act on bacteria through various mechanisms.

JOURNAL OF EVOLUTION OF MEDICAL AND DENTAL SCIENCES-JEMDS (2021)

Review Multidisciplinary Sciences

Nanoparticles as antimicrobial and antiviral agents: A literature-based perspective study

Shabnam Sharmin et al.

Summary: The exploration of nanoparticles as antimicrobial and antiviral agents has gained attention due to increasing antibiotic resistance. Nanoparticles have shown potential in treating microbial infections, and their use as delivery agents cannot be overlooked. Various materials have been used to synthesize nanoparticles with unique properties for specific therapeutic purposes.

HELIYON (2021)

Article Polymer Science

Synthesis of antibacterial polyether biguanide curing agent and its cured antibacterial epoxy resin

Rui Li et al.

Summary: This study synthesized three polyether biguanide compounds with high antibacterial properties, among which o-TTB showed the best antimicrobial performance. An epoxy resin with antibacterial properties was prepared using the obtained TTB as a curing agent, and the cured resin was found to have a significant inhibitory effect on bacterial growth. The non-isothermal curing kinetics of the o-TTB/E51 system were investigated to determine optimal curing conditions.

DESIGNED MONOMERS AND POLYMERS (2021)

Article Chemistry, Multidisciplinary

A high performance fully bio-based epoxy thermoset from a syringaldehyde-derived epoxy monomer cured by furan-derived amine

Hafezeh Nabipour et al.

Summary: The study focused on the development of a fully bio-based epoxy thermoset from syringaldehyde and furfurylamine, which exhibited high glass transition temperature, mechanical strength, intrinsic flame resistance, and antibacterial properties. This bio-based epoxy thermoset showed superior performance compared to petroleum-based epoxy thermosets, making it a promising green substitute for high performance applications in fire safety.

GREEN CHEMISTRY (2021)

Article Chemistry, Multidisciplinary

Antiviral-nanoparticle interactions and reactions

Chad D. Vecitis

Summary: A considerable range of virus and antiviral research has emerged from the current pandemic, with a focus on nanoparticle-virus and antiviral nanomaterial research. The research highlights the antiviral potential of nanoparticle-virus interactions and nanoparticle-driven viral reactions. Future directions for antiviral nanomaterial research will be discussed.

ENVIRONMENTAL SCIENCE-NANO (2021)

Article Materials Science, Characterization & Testing

Rheological and antimicrobial properties of epoxy-based hybrid nanocoatings

M. R. Islam et al.

POLYMER TESTING (2020)

Article Materials Science, Multidisciplinary

Reinforcing epoxy with Ag-decorated flower-like TiO2nanoparticles: Structure and photocatalytic performance

Derya Kapusuz

APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING (2020)

Review Dentistry, Oral Surgery & Medicine

Comprehensive review of current endodontic sealers

Takashi Komabayashi et al.

DENTAL MATERIALS JOURNAL (2020)

Review Nanoscience & Nanotechnology

Antimicrobial metal-based nanoparticles: a review on their synthesis, types and antimicrobial action

Matias Guerrero Correa et al.

BEILSTEIN JOURNAL OF NANOTECHNOLOGY (2020)

Review Polymer Science

Polymeric Coatings with Antimicrobial Activity: A Short Review

Ana C. Pinho et al.

POLYMERS (2020)

Review Nanoscience & Nanotechnology

A Review on Enhancing the Antibacterial Activity of ZnO: Mechanisms and Microscopic Investigation

Buzuayehu Abebe et al.

NANOSCALE RESEARCH LETTERS (2020)

Article Materials Science, Biomaterials

Design of Nanosilver-Epoxy Films for Hygienic Pharmaceutical Packaging

Ifeanyi Thaddeus Nzekwe et al.

BIONANOSCIENCE (2020)

Article Polymer Science

PANI-chitosan-TiO2 ternary nanocomposite and its effectiveness on antibacterial and antistatic behavior of epoxy coating

Abdolreza Mirmohseni et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2019)

Article Materials Science, Composites

Improvement mechanical and antibacterial properties of epoxy by polyethylene glycol and Ag/CuO nanoparticles

Mahdi Ashrafi et al.

POLYMER COMPOSITES (2019)

Article Materials Science, Multidisciplinary

Physico-Mechanical and Antibacterial Properties of Pine Gum/Epoxy Composites with/without Silver Nanoparticles

Ripudaman Singh Negi et al.

MACROMOLECULAR MATERIALS AND ENGINEERING (2019)

Review Biochemical Research Methods

Metal nanoparticles synthesis through natural phenolic acids

Seyed Mohammad Amini et al.

IET NANOBIOTECHNOLOGY (2019)

Review Engineering, Biomedical

Review of titanium surface modification techniques and coatings for antibacterial applications

H. Chouirfa et al.

ACTA BIOMATERIALIA (2019)

Article Chemistry, Physical

High-performance, command-degradable, antibacterial Schiff base epoxy thermosets: synthesis and properties

Xiwei Xu et al.

JOURNAL OF MATERIALS CHEMISTRY A (2019)

Review Engineering, Biomedical

In vitro methods for the evaluation of antimicrobial surface designs

Jelmer Sjollema et al.

ACTA BIOMATERIALIA (2018)

Review Nanoscience & Nanotechnology

Properties of Zinc Oxide Nanoparticles and Their Activity Against Microbes

Khwaja Salahuddin Siddiqi et al.

NANOSCALE RESEARCH LETTERS (2018)

Review Nanoscience & Nanotechnology

Properties of Zinc Oxide Nanoparticles and Their Activity Against Microbes

Khwaja Salahuddin Siddiqi et al.

NANOSCALE RESEARCH LETTERS (2018)

Article Chemistry, Physical

ZnO superhydrophobic coating via convenient spraying and its biofouling resistance

Changquan Li et al.

SURFACE AND INTERFACE ANALYSIS (2018)

Article Marine & Freshwater Biology

Antifouling Properties of Bacteria Associated with Marine Oyster Crassostrea Sp.

Nadarajan Viju et al.

THALASSAS (2018)

Review Materials Science, Coatings & Films

Scientific potential of chitosan blending with different polymeric materials: A review

Ayesha Kausar

JOURNAL OF PLASTIC FILM & SHEETING (2017)

Article Environmental Sciences

Higher dermal exposure of cashiers to BPA and its association with DNA oxidative damage

Yanshan Lv et al.

ENVIRONMENT INTERNATIONAL (2017)

Article Dentistry, Oral Surgery & Medicine

Intradentinal antimicrobial action and filling quality promoted by ultrasonic agitation of epoxy resin-based sealer in endodontic obturation

Murilo Priori Alcalde et al.

JOURNAL OF APPLIED ORAL SCIENCE (2017)

Article Polymer Science

Multifunctional Cu2+-montmorillonite/epoxy resin nanocomposites with antibacterial activity

Alessandra Bartolozzi et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2017)

Article Dentistry, Oral Surgery & Medicine

Silver doped titanium dioxide nanoparticles as antimicrobial additives to dental polymers.

C. Chambers et al.

DENTAL MATERIALS (2017)

Article Materials Science, Composites

Surface grafting of flax fibres with hydrous zirconia nanoparticles and the effects on the tensile and bonding properties

Anu Ajith et al.

JOURNAL OF COMPOSITE MATERIALS (2016)

Article Materials Science, Composites

Toughening mechanisms in polymer nanocomposites: From experiments to modelling

M. Quaresimin et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2016)

Article Electrochemistry

Self-healing Passivation of Antimicrobial Iron oxide Nanoparticles for Epoxy Nanocomposite Coatings on Carbon Steel

Ayman M. Atta et al.

INTERNATIONAL JOURNAL OF ELECTROCHEMICAL SCIENCE (2016)

Article Materials Science, Biomaterials

Development of silane grafted ZnO core shell nanoparticles loaded diglycidyl epoxy nanocomposites film for antimicrobial applications

S. Suresh et al.

MATERIALS SCIENCE AND ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2016)

Article Biophysics

Synthesis variants of quaternary ammonium polyethyleneimine nanoparticles and their antibacterial efficacy in dental materials

Nathan Zaltsman et al.

JOURNAL OF APPLIED BIOMATERIALS & FUNCTIONAL MATERIALS (2016)

Review Materials Science, Multidisciplinary

Epoxy Sol-Gel Hybrid Thermosets

Angels Serra et al.

COATINGS (2016)

Article Multidisciplinary Sciences

The Activity of Antimicrobial Surfaces Varies by Testing Protocol Utilized

Matias D. Campos et al.

PLOS ONE (2016)

Article Nanoscience & Nanotechnology

Design and characterization of non-toxic nano-hybrid coatings for corrosion and fouling resistance

P. Saravanan et al.

JOURNAL OF SCIENCE-ADVANCED MATERIALS AND DEVICES (2016)

Review Chemistry, Medicinal

Methods of Synthesis, Properties and Biomedical Applications of CuO Nanoparticles

Madalina Elena Grigore et al.

PHARMACEUTICALS (2016)

Article Engineering, Manufacturing

Mechanical behaviour of epoxy/silica nanocomposites: Experiments and modelling

M. Zappalorto et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2015)

Article Engineering, Multidisciplinary

Multifunctional polymer nanocomposites with enhanced mechanical and anti-microbial properties

M. Quaresimin et al.

COMPOSITES PART B-ENGINEERING (2015)

Article Engineering, Chemical

Synthesis of Polymer Quaternary Ammonium Salt Containing Epoxy Group/Nano ZnO Long-Acting Antimicrobial Coating for Cotton Fabrics

Gao Dangge et al.

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2015)

Article Materials Science, Biomaterials

Biocide immobilized OMMT-carbon dot reduced Cu2O nanohybrid/hyperbranched epoxy nanocomposites: Mechanical, thermal, antimicrobial and optical properties

Bibekananda De et al.

MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2015)

Article Chemistry, Multidisciplinary

Tough hyperbranched epoxy/neem-oil-modified OMMT thermosetting nanocomposite with an antimicrobial attribute

Bibekananda De et al.

NEW JOURNAL OF CHEMISTRY (2015)

Review Polymer Science

Modification of epoxy resins with functional silanes, polysiloxanes, silsesquioxanes, silica and silicates

Jerzy J. Chrusciel et al.

PROGRESS IN POLYMER SCIENCE (2015)

Article Materials Science, Coatings & Films

Enhancement of biocorrosion resistance of epoxy coating by addition of Ag/Zn exchanged a zeolite

Andrea M. Pereyra et al.

SURFACE & COATINGS TECHNOLOGY (2015)

Review Materials Science, Biomaterials

Non-toxic, non-biocide-release antifouling coatings based on molecular structure design for marine applications

Ayda G. Nurioglu et al.

JOURNAL OF MATERIALS CHEMISTRY B (2015)

Article Chemistry, Physical

Measurement of microbial adhesive forces with a parallel plate flow chamber

Akinori Yoshihara et al.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2014)

Review Chemistry, Multidisciplinary

Antimicrobial Nanocomposites Based on Natural Modified Materials: A Review of Carbons and Clays

Grazyna Simha Martynkova et al.

JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY (2014)

Review Microbiology

The importance of the viable but non-culturable state in human bacterial pathogens

Laam Li et al.

FRONTIERS IN MICROBIOLOGY (2014)

Article Materials Science, Multidisciplinary

Hyperbranched epoxy/MWCNT-CuO-nystatin nanocomposite as a high performance, biocompatible, antimicrobial material

Shaswat Barua et al.

MATERIALS RESEARCH EXPRESS (2014)

Article Agricultural Engineering

Silver-embedded modified hyperbranched epoxy/clay nanocomposites as antibacterial materials

Buddhadeb Roy et al.

BIORESOURCE TECHNOLOGY (2013)

Review Biotechnology & Applied Microbiology

Quorum sensing inhibitors: An overview

Vipin Chandra Kalia

BIOTECHNOLOGY ADVANCES (2013)

Article Biophysics

Antibacterial activities effectuated by co-continuous epoxy-based polymer materials

Takuya Kubo et al.

COLLOIDS AND SURFACES B-BIOINTERFACES (2013)

Article Materials Science, Composites

Notch effect in clay-modified epoxy: a new perspective on nanocomposite properties

M. Zappalorto et al.

COMPOSITE INTERFACES (2013)

Article Mechanics

Mixed mode (I plus II) fracture toughness of polymer nanoclay nanocomposites

Michele Zappalorto et al.

ENGINEERING FRACTURE MECHANICS (2013)

Article Nanoscience & Nanotechnology

Synthesis, characterization and optical properties of zinc oxide nanoparticles

Surabhi Siva Kumar et al.

INTERNATIONAL NANO LETTERS (2013)

Article Chemistry, Applied

Thermal, microbial, and corrosion resistant metal-containing poly(Schiff) epoxy coatings

Tansir Ahamad et al.

JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH (2012)

Review Biophysics

Review of immobilized antimicrobial agents and methods for testing

John-Bruce D. Green et al.

BIOINTERPHASES (2011)

Article Biophysics

Optimized grafting of antimicrobial peptides on stainless steel surface and biofilm resistance tests

Arnaud Hequet et al.

COLLOIDS AND SURFACES B-BIOINTERFACES (2011)

Article Engineering, Biomedical

Novel, UV-curable coatings containing a tethered biocide: Synthesis, characterization, and antimicrobial activity

Zhigang Chen et al.

JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A (2010)

Article Engineering, Biomedical

Studies on acrylated epoxydised triglyceride resin-co-butyl methacrylate towards the development of biodegradable pressure sensitive adhesives

S. Begila David et al.

JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE (2009)

Article Polymer Science

Hybrid Siloxane Epoxy Coatings Containing Quaternary Ammonium Moieties

Ramesh R. Pant et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2008)

Article Materials Science, Composites

Fundamental aspects of nano-reinforced composites

Bodo Fiedler et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2006)

Article Polymer Science

Synthesis, characterization, and antimicrobial studies of newly developed metal-chelated epoxy resins

N Nishat et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2006)

Article Materials Science, Multidisciplinary

Fracture behaviour of nanoplatelet reinforced polymer nanocomposites

W. -J. Boo et al.

MATERIALS SCIENCE AND TECHNOLOGY (2006)

Article Dentistry, Oral Surgery & Medicine

In vitro antibacterial activity of endodontic sealers

G Pizzo et al.

JOURNAL OF DENTISTRY (2006)

Article Polymer Science

Morphology and fracture behavior of intercalated epoxy/clay nanocomposites

TX Liu et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2004)