相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。Precision loss modeling method of ball screw pair
Jialan Liu et al.
MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2020)
Theoretical and experimental analysis of the preload degradation of double-nut ball screws
Hua-Xi Zhou et al.
PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY (2020)
An accuracy degradation analysis of ball screw mechanism considering time-varying motion and loading working conditions
Qiang Cheng et al.
MECHANISM AND MACHINE THEORY (2019)
Lumped parameters modelling of the EMAs' ball screw drive with special consideration to ball/grooves interactions to support model-based health monitoring
Antonio Carlo Bertolino et al.
MECHANISM AND MACHINE THEORY (2019)
Is viscoelasticity of any relevance to quantitative EHL friction predictions?
Wassim Habchi et al.
TRIBOLOGY INTERNATIONAL (2019)
Study of ball screw system preload monitoring during operation based on the motor current and screw-nut vibration
Tung Lam Nguyen et al.
MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2019)
A Model for Shear Degradation of Lithium Soap Grease at Ambient Temperature
Yuxin Zhou et al.
TRIBOLOGY TRANSACTIONS (2018)
Thermo-mechanical modelling of ball screw preload force variation in different working conditions
A. Oyanguren et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2018)
Prognosability study of ball screw degradation using systematic methodology
Pin Li et al.
MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2018)
Investigation of the precision loss for ball screw raceway based on the modified Archard theory
Chang-Guang Zhou et al.
INDUSTRIAL LUBRICATION AND TRIBOLOGY (2017)
Review on signal-by-wire and power-by-wire actuation for more electric aircraft
Jean-Charles Mare et al.
CHINESE JOURNAL OF AERONAUTICS (2017)
Correlation between preload and no-load drag torque of ball screws
Chang-Guang Zhou et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2016)
Effect of Thickener Particle Geometry and Concentration on the Grease EHL Film Thickness at Medium Speeds
F. Cyriac et al.
TRIBOLOGY LETTERS (2016)
Preload variation due to temperature increase in double nut ball screws
A. Oyanguren et al.
PRODUCTION ENGINEERING-RESEARCH AND DEVELOPMENT (2016)
Influence of controller parameters on the life of ball screw feed drives
Stefano Mauro et al.
ADVANCES IN MECHANICAL ENGINEERING (2015)
Experimental comparison of five friction models on the same test-bed of the micro stick-slip motion system
Y. F. Liu et al.
MECHANICAL SCIENCES (2015)
Rolling Friction Torque in Ball-Race Contacts Operating in Mixed Lubrication Conditions
Mihaela Rodica D. Balan et al.
LUBRICANTS (2015)
Grease Aging Effects on Film Formation under Fully-Flooded and Starved Lubrication
Tiago Cousseau et al.
LUBRICANTS (2015)
Optimal preliminary design of electromechanical actuators
Marc Budinger et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART G-JOURNAL OF AEROSPACE ENGINEERING (2014)
The influence of the lubricant viscosity on the rolling friction torque
Mihaela Rodica D. Balan et al.
TRIBOLOGY INTERNATIONAL (2014)
Sensitivity Analysis of the Transmission Chain of a Horizontal Machining Tool Axis to Design and Control Parameters
Stefano Mauro et al.
ADVANCES IN MECHANICAL ENGINEERING (2014)
Establishing a cost-effective sensing system and signal processing method to diagnose preload levels of ball screws
Guo-Hua Feng et al.
MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2012)
Wear analysis of the offset type preloaded ball-screw operating at high speed
Chin-Chung Wei et al.
WEAR (2012)
Safety-critical design of electromechanical actuation systems in commercial aircraft
J. W. Bennett et al.
IET ELECTRIC POWER APPLICATIONS (2011)
Improved Screw-Nut Interface Model for High-Performance Ball Screw Drives
Chinedum E. Okwudire
JOURNAL OF MECHANICAL DESIGN (2011)
Kinematical analyses and transmission efficiency of a preloaded ball screw operating at high rotational speeds
Chin-Chung Wei et al.
MECHANISM AND MACHINE THEORY (2011)
Correlation between feed velocity and preloading in ball screw drives
A. Verl et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2010)
Hybrid Modeling of Ball Screw Drives With Coupled Axial, Torsional, and Lateral Dynamics
Chinedum E. Okwudire et al.
JOURNAL OF MECHANICAL DESIGN (2009)
Analysis of a ball screw with a preload and lubrication
Chin Chung Wei et al.
TRIBOLOGY INTERNATIONAL (2009)
Global and local analysis of gear scuffing tests using a mixed film lubrication model
J. Castro et al.
TRIBOLOGY INTERNATIONAL (2008)
Approximate analytical model for Hertzian elliptical contact problems
J-F. Antoine et al.
JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME (2006)
Kinematic analysis of the ball screw mechanism considering variable contact angles and elastic deformations
CC Wei et al.
JOURNAL OF MECHANICAL DESIGN (2003)
A computer program package for the prediction of EHL and mixed lubrication characteristics, friction, subsurface stresses and flash temperatures based on measured 3-D surface roughness
D Zhu et al.
TRIBOLOGY TRANSACTIONS (2001)
Magnetic actuators
D Howe
SENSORS AND ACTUATORS A-PHYSICAL (2000)
分享论文
