相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。A review on machine learning in 3D printing: applications, potential, and challenges
G. D. Goh et al.
ARTIFICIAL INTELLIGENCE REVIEW (2021)
Powder Bed Fusion Additive Manufacturing Using Critical Raw Materials: A Review
Vladimir V. Popov et al.
MATERIALS (2021)
Emerging metallic systems for additive manufacturing: In-situ alloying and multi-metal processing in laser powder bed fusion
S. L. Sing et al.
PROGRESS IN MATERIALS SCIENCE (2021)
Camera signal dependencies within coaxial melt pool monitoring in laser powder bed fusion
Tobias Kolb et al.
RAPID PROTOTYPING JOURNAL (2020)
A cost model for the economic evaluation of in-situ monitoring tools in metal additive manufacturing
Bianca Maria Colosimo et al.
INTERNATIONAL JOURNAL OF PRODUCTION ECONOMICS (2020)
In-process monitoring of porosity in additive manufacturing using optical emission spectroscopy
Mohammad Montazeri et al.
IISE TRANSACTIONS (2020)
In Operando Monitoring by Analysis of Backscattered Electrons during Electron Beam Melting
Christopher Arnold et al.
ADVANCED ENGINEERING MATERIALS (2020)
A deep neural network for classification of melt-pool images in metal additive manufacturing
Ohyung Kwon et al.
JOURNAL OF INTELLIGENT MANUFACTURING (2020)
Penelope: A Novel Prototype for In Situ Defect Removal in LPBF
B. M. Colosimo et al.
JOM (2020)
Bitmap generation from computer-aided design for potential layer-quality evaluation in electron beam additive manufacturing
Hay Wong
RAPID PROTOTYPING JOURNAL (2020)
Smart Build-Plate for Metal Additive Manufacturing Processes
Adam Hehr et al.
SENSORS (2020)
In Situ Thermography of the Metal Bridge Structures Fabricated for the 2018 Additive Manufacturing Benchmark Test Series (AM-Bench 2018)
Jarred C. Heigel et al.
JOURNAL OF RESEARCH OF THE NATIONAL INSTITUTE OF STANDARDS AND TECHNOLOGY (2020)
Toward the digital twin of additive manufacturing: Integrating thermal simulations, sensing, and analytics to detect process faults
Aniruddha Gaikwad et al.
IISE TRANSACTIONS (2020)
In-situ full-field mapping of melt flow dynamics in laser metal additive manufacturing
Qilin Guo et al.
ADDITIVE MANUFACTURING (2020)
Linking pyrometry to porosity in additively manufactured metals
John A. Mitchell et al.
ADDITIVE MANUFACTURING (2020)
Correlation between forming quality and spatter dynamics in laser powder bed fusion
Jie Yin et al.
ADDITIVE MANUFACTURING (2020)
Model-based feedforward control of laser powder bed fusion additive manufacturing
Qian Wang et al.
ADDITIVE MANUFACTURING (2020)
In-situ areal inspection of powder bed for electron beam fusion system based on fringe projection profilometry
Yue Liu et al.
ADDITIVE MANUFACTURING (2020)
Experimental observation of stress formation during selective laser melting using in situ X-ray diffraction
Felix Schmeiser et al.
ADDITIVE MANUFACTURING (2020)
Tracking and controlling the morphology evolution of 3D powder-bed fusion in situ using inline coherent imaging
Tristan G. Fleming et al.
ADDITIVE MANUFACTURING (2020)
Investigating the effect of metal powder recycling in Electron beam Powder Bed Fusion using process log data
Sujana Chandrasekar et al.
ADDITIVE MANUFACTURING (2020)
Pressure dependence of the laser-metal interaction under laser powder bed fusion conditions probed by in situ X-ray imaging
Nicholas P. Calta et al.
ADDITIVE MANUFACTURING (2020)
Correlation of spatter behavior and process zone formation in powder bed fusion of metals
Eric Eschner et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2020)
In-Situ Defect Detection in Laser Powder Bed Fusion by Using Thermography and Optical Tomography-Comparison to Computed Tomography
Gunther Mohr et al.
METALS (2020)
Layer-wise control of selective laser melting by means of inline melt pool area measurements
Ema Vasileska et al.
JOURNAL OF LASER APPLICATIONS (2020)
In-situ optical emission spectroscopy of selective laser melting
Cody S. Lough et al.
JOURNAL OF MANUFACTURING PROCESSES (2020)
Process optimization of complex geometries using feed forward control for laser powder bed fusion additive manufacturing
C. L. Druzgalski et al.
ADDITIVE MANUFACTURING (2020)
Classification of specimen density in Laser Powder Bed Fusion (L-PBF) using in-process structure-borne acoustic process emissions
N. Eschner et al.
ADDITIVE MANUFACTURING (2020)
Detecting keyhole pore defects and monitoring process signatures during laser powder bed fusion: A correlation between in situ pyrometry and ex situ X-ray radiography
Jean-Baptiste Forien et al.
ADDITIVE MANUFACTURING (2020)
In-situ synthesis of oxides by reactive process atmospheres during L-PBF of stainless steel
M. P. Haines et al.
ADDITIVE MANUFACTURING (2020)
Correlation of SWIR imaging with LPBF 304L stainless steel part properties
Cody S. Lough et al.
ADDITIVE MANUFACTURING (2020)
Correlations between thermal history and keyhole porosity in laser powder bed fusion
Noah H. Paulson et al.
ADDITIVE MANUFACTURING (2020)
In situ 3D X-ray microtomography of laser-based powder-bed fusion (L-PBF)-A feasibility study
Pierre Lhuissier et al.
ADDITIVE MANUFACTURING (2020)
Multi-view fringe projection system for surface topography measurement during metal powder bed fusion
Andrew Dickins et al.
JOURNAL OF THE OPTICAL SOCIETY OF AMERICA A-OPTICS IMAGE SCIENCE AND VISION (2020)
Powder-Bed Fusion Process Monitoring by Machine Vision With Hybrid Convolutional Neural Networks
Yingjie Zhang et al.
IEEE TRANSACTIONS ON INDUSTRIAL INFORMATICS (2020)
Neural network based image segmentation for spatter extraction during laser-based powder bed fusion processing
Zhenbiao Tan et al.
OPTICS AND LASER TECHNOLOGY (2020)
Identification and evaluation of defects in selective laser melted 316L stainless steel parts via in-situ monitoring and micro computed tomography
Q. Y. Lu et al.
ADDITIVE MANUFACTURING (2020)
Machine learning in additive manufacturing: State-of-the-art and perspectives
C. Wang et al.
ADDITIVE MANUFACTURING (2020)
Types of spatter and their features and formation mechanisms in laser powder bed fusion additive manufacturing process
Zachary A. Young et al.
ADDITIVE MANUFACTURING (2020)
Automated layerwise detection of geometrical distortions in laser powder bed fusion
Luca Pagani et al.
ADDITIVE MANUFACTURING (2020)
Layer-wise anomaly detection and classification for powder bed additive manufacturing processes: A machine-agnostic algorithm for real-time pixel-wise semantic segmentation
Luke Scime et al.
ADDITIVE MANUFACTURING (2020)
Material characterisation using electronic imaging for Electron Beam Melting process monitoring
Hay Wong et al.
MANUFACTURING LETTERS (2020)
Accurate determination of laser spot position during laser powder bed fusion process thermography
Ivan Zhirnov et al.
MANUFACTURING LETTERS (2020)
A residual heat compensation based scan strategy for powder bed fusion additive manufacturing
H. Yeung et al.
MANUFACTURING LETTERS (2020)
Monitoring and detection of meltpool and spatter regions in laser powder bed fusion of super alloy Inconel 625
Lihang Yang et al.
PROGRESS IN ADDITIVE MANUFACTURING (2020)
In situ capture of spatter signature of SLM process using maximum entropy double threshold image processing method based on genetic algorithm
Dekun Yang et al.
OPTICS AND LASER TECHNOLOGY (2020)
A deep learning-based model for defect detection in laser-powder bed fusion using in-situ thermographic monitoring
Hermann Baumgartl et al.
PROGRESS IN ADDITIVE MANUFACTURING (2020)
In Situ Measurements of Melt-Pool Length and Cooling Rate During 3D Builds of the Metal AM-Bench Artifacts
Jarred C. Heigel et al.
INTEGRATING MATERIALS AND MANUFACTURING INNOVATION (2020)
Measurements of Melt Pool Geometry and Cooling Rates of Individual Laser Traces on IN625 Bare Plates
Brandon Lane et al.
INTEGRATING MATERIALS AND MANUFACTURING INNOVATION (2020)
Powder bed irregularity and hot-spot detection in electron beam melting by means of in-situ video imaging
Marco Grasso et al.
MANUFACTURING LETTERS (2020)
Online quality inspection using Bayesian classification in powder-bed additive manufacturing from high-resolution visual camera images
Masoumeh Aminzadeh et al.
JOURNAL OF INTELLIGENT MANUFACTURING (2019)
Pilot capability evaluation of a feedback electronic imaging system prototype for in-process monitoring in electron beam additive manufacturing
Hay Wong et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2019)
Immediate development of processing windows for selective electron beam melting using layerwise monitoring via backscattered electron detection
Christoph R. Pobel et al.
MATERIALS LETTERS (2019)
A high-resolution and large field-of-view scanner for in-line characterization of powder bed defects during additive manufacturing
Le Tan Phuc et al.
MATERIALS & DESIGN (2019)
Complementary use of pulsed and continuous wave emission modes to stabilize melt pool geometry in laser powder bed fusion
Ali Gokhan Demir et al.
OPTICS AND LASER TECHNOLOGY (2019)
A statistical learning method for image-based monitoring of the plume signature in laser powder bed fusion
M. Grasso et al.
ROBOTICS AND COMPUTER-INTEGRATED MANUFACTURING (2019)
Automatic fault detection for laser powder-bed fusion using semi-supervised machine learning
Ikenna A. Okaro et al.
ADDITIVE MANUFACTURING (2019)
Deep Learning for In Situ and Real-Time Quality Monitoring in Additive Manufacturing Using Acoustic Emission
Sergey A. Shevchik et al.
IEEE TRANSACTIONS ON INDUSTRIAL INFORMATICS (2019)
Deep Learning of Variant Geometry in Layerwise Imaging Profiles for Additive Manufacturing Quality Control
Farhad Imani et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2019)
Optical in-situ monitoring and correlation of density and mechanical properties of stainless steel parts produced by selective laser melting process based on varied energy density
Q. Y. Lu et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2019)
In-situ characterization and quantification of melt pool variation under constant input energy density in laser powder bed fusion additive manufacturing process
Qilin Guo et al.
ADDITIVE MANUFACTURING (2019)
Approach to qualification using E-PBF in-situ process monitoring in Ti-6Al-4V
S. Yoder et al.
ADDITIVE MANUFACTURING (2019)
Process Monitoring Dataset from the Additive Manufacturing Metrology Testbed (AMMT): Three-Dimensional Scan Strategies
Brandon Lane et al.
JOURNAL OF RESEARCH OF THE NATIONAL INSTITUTE OF STANDARDS AND TECHNOLOGY (2019)
Melt pool geometry and morphology variability for the Inconel 718 alloy in a laser powder bed fusion additive manufacturing process
Luke Scime et al.
ADDITIVE MANUFACTURING (2019)
Benchmarking spatial resolution in electronic imaging for potential in-situ Electron Beam Melting monitoring
Hay Wong et al.
ADDITIVE MANUFACTURING (2019)
Layerwise Anomaly Detection in Laser Powder-Bed Fusion Metal Additive Manufacturing
Mohamad Mahmoudi et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2019)
In Situ Quality Monitoring in AM Using Acoustic Emission: A Reinforcement Learning Approach
K. Wasmer et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2019)
The effect of powder oxidation on defect formation in laser additive manufacturing
Chu Lun Alex Leung et al.
ACTA MATERIALIA (2019)
In situ thermography for laser powder bed fusion: Effects of layer temperature on porosity, microstructure and mechanical properties
Richard J. Williams et al.
ADDITIVE MANUFACTURING (2019)
Ultrafast dynamics of laser-metal interactions in additive manufacturing alloys captured by in situ X-ray imaging
Aiden A. Martin et al.
MATERIALS TODAY ADVANCES (2019)
In-situ monitoring of laser-based PBF via off-axis vision and image processing approaches
Yingjie Zhang et al.
ADDITIVE MANUFACTURING (2019)
In situ synchrotron X-ray imaging of 4140 steel laser powder bed fusion
Andrew Bobel et al.
MATERIALIA (2019)
In situ measurement of part geometries in layer images from laser beam melting processes
Joschka zur Jacobsmuehlen et al.
PROGRESS IN ADDITIVE MANUFACTURING (2019)
3D particle tracking velocimetry for the determination of temporally resolved particle trajectories within laser powder bed fusion of metals
Eric Eschner et al.
INTERNATIONAL JOURNAL OF EXTREME MANUFACTURING (2019)
Formation processes for large ejecta and interactions with melt pool formation in powder bed fusion additive manufacturing
Abdalla R. Nasser et al.
SCIENTIFIC REPORTS (2019)
Statistical analysis of spatter velocity with high-speed stereovision in laser powder bed fusion
Christopher Barrett et al.
PROGRESS IN ADDITIVE MANUFACTURING (2019)
In-process closed-loop control for stabilising the melt pool temperature in selective laser melting
Volker Renken et al.
PROGRESS IN ADDITIVE MANUFACTURING (2019)
Statistical transfer learning: A review and some extensions to statistical process control
Fugee Tsung et al.
QUALITY ENGINEERING (2018)
Modeling and monitoring methods for spatial and image data
Bianca Maria Colosimo
QUALITY ENGINEERING (2018)
Transient dynamics of powder spattering in laser powder bed fusion additive manufacturing process revealed by in-situ high-speed high-energy x-ray imaging
Qilin Guo et al.
ACTA MATERIALIA (2018)
Fluid and particle dynamics in laser powder bed fusion
P. Bidare et al.
ACTA MATERIALIA (2018)
Defect detection in selective laser melting technology by acoustic signals with deep belief networks
Dongsen Ye et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2018)
Micron-Level Layer-Wise Surface Profilometry to Detect Porosity Defects in Powder Bed Fusion of Inconel 718
Chris Barrett et al.
JOM (2018)
Sensor-Based Build Condition Monitoring in Laser Powder Bed Fusion Additive Manufacturing Process Using a Spectral Graph Theoretic Approach
Mohammad Montazeri et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2018)
A Combined Experimental-Numerical Method to Evaluate Powder Thermal Properties in Laser Powder Bed Fusion
Bo Cheng et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2018)
In-Process Monitoring of Material Cross-Contamination Defects in Laser Powder Bed Fusion
Mohammad Montazeri et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2018)
An instrument for in situ time-resolved X-ray imaging and diffraction of laser powder bed fusion additive manufacturing processes
Nicholas P. Calta et al.
REVIEW OF SCIENTIFIC INSTRUMENTS (2018)
In situ monitoring of selective laser melting of zinc powder via infrared imaging of the process plume
M. Grasso et al.
ROBOTICS AND COMPUTER-INTEGRATED MANUFACTURING (2018)
In situ X-ray imaging of defect and molten pool dynamics in laser additive manufacturing
Chu Lun Alex Leung et al.
NATURE COMMUNICATIONS (2018)
In situ measurements of layer roughness during laser powder bed fusion additive manufacturing using low coherence scanning interferometry
Philip J. DePond et al.
MATERIALS & DESIGN (2018)
Extraction and evaluation of melt pool, plume and spatter information for powder-bed fusion AM process monitoring
Yingjie Zhang et al.
MATERIALS & DESIGN (2018)
Selective laser melting finite element modeling: Validation with high-speed imaging and lack of fusion defects prediction
Claire Bruna-Rosso et al.
MATERIALS & DESIGN (2018)
Laser powder bed fusion in high-pressure atmospheres
P. Bidare et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2018)
In situ monitoring of selective laser melting using plume and spatter signatures by deep belief networks
Dongsen Ye et al.
ISA TRANSACTIONS (2018)
Correlations Between Powder Feedstock Quality, In Situ Porosity Detection, and Fatigue Behavior of Ti-6Al-4V Fabricated by Powder Bed Electron Beam Melting: A Step Towards Qualification
Peeyush Nandwana et al.
JOM (2018)
Opportunities and challenges of quality engineering for additive manufacturing
Bianca M. Colosimo et al.
JOURNAL OF QUALITY TECHNOLOGY (2018)
Process-Defect-Structure-Property Correlations During Laser Powder Bed Fusion of Alloy 718: Role of In Situ and Ex Situ Characterizations
S. J. Foster et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2018)
Mechanical Properties and In Situ Deformation Imaging of Microlattices Manufactured by Laser Based Powder Bed Fusion
Anton Du Plessis et al.
MATERIALS (2018)
Machine-Learning-Based Monitoring of Laser Powder Bed Fusion
Bodi Yuan et al.
ADVANCED MATERIALS TECHNOLOGIES (2018)
Spatially weighted PCA for monitoring video image data with application to additive manufacturing
Bianca M. Colosimo et al.
JOURNAL OF QUALITY TECHNOLOGY (2018)
Effects of scan speed on vapor plume behavior and spatter generation in laser powder bed fusion additive manufacturing
Hang Zheng et al.
JOURNAL OF MANUFACTURING PROCESSES (2018)
A multi-scale convolutional neural network for autonomous anomaly detection and classification in a laser powder bed fusion additive manufacturing process
Luke Scime et al.
ADDITIVE MANUFACTURING (2018)
Correlation of selective laser melting-melt pool events with the tensile properties of Ti-6Al-4V ELI processed by laser powder bed fusion
Manisha Bisht et al.
ADDITIVE MANUFACTURING (2018)
Thermal near infrared monitoring system for electron beam melting with emissivity tracking
N. Boone et al.
ADDITIVE MANUFACTURING (2018)
A study on the effect of energy input on spatter particles creation during selective laser melting process
Mohsen Taheri Andani et al.
ADDITIVE MANUFACTURING (2018)
Role of scan strategies on thermal gradient and solidification rate in electron beam powder bed fusion
Y. S. Lee et al.
ADDITIVE MANUFACTURING (2018)
In situ defect detection in selective laser melting via full-field infrared thermography
Jamison L. Bartlett et al.
ADDITIVE MANUFACTURING (2018)
Characterization of in-situ measurements based on layerwise imaging in laser powder bed fusion
Fabio Caltanissetta et al.
ADDITIVE MANUFACTURING (2018)
Anomaly detection and classification in a laser powder bed additive manufacturing process using a trained computer vision algorithm
Luke Scime et al.
ADDITIVE MANUFACTURING (2018)
Characterization of topology optimized Ti-6Al-4V components using electron beam powder bed fusion
S. Yoder et al.
ADDITIVE MANUFACTURING (2018)
Assessment of optical emission analysis for in-process monitoring of powder bed fusion additive manufacturing
Alexander J. Dunbar et al.
VIRTUAL AND PHYSICAL PROTOTYPING (2018)
Application of supervised machine learning for defect detection during metallic powder bed fusion additive manufacturing using high resolution imaging
Christian Gobert et al.
ADDITIVE MANUFACTURING (2018)
The effect of multi-beam strategies on selective laser melting of stainless steel 316L
Thorsten Heeling et al.
ADDITIVE MANUFACTURING (2018)
Melt pool temperature and cooling rates in laser powder bed fusion
Paul A. Hooper
ADDITIVE MANUFACTURING (2018)
Study of the spatter distribution on the powder bed during selective laser melting
Ahmad Bin Anwar et al.
ADDITIVE MANUFACTURING (2018)
In-Process Monitoring of Selective Laser Melting: Spatial Detection of Defects Via Image Data Analysis
Marco Grasso et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2017)
Investigation of remelting and preheating in SLM of 18Ni300 maraging steel as corrective and preventive measures for porosity reduction
Ali Gokhan Demir et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2017)
Process defects and in situ monitoring methods in metal powder bed fusion: a review
Marco Grasso et al.
MEASUREMENT SCIENCE AND TECHNOLOGY (2017)
Spatter formation in selective laser melting process using multi-laser technology
Mohsen Taheri Andani et al.
MATERIALS & DESIGN (2017)
Ror2 signaling regulates Golgi structure and transport through IFT20 for tumor invasiveness
Michiru Nishita et al.
SCIENTIFIC REPORTS (2017)
Thermographic Microstructure Monitoring in Electron Beam Additive Manufacturing
J. Raplee et al.
SCIENTIFIC REPORTS (2017)
Metal vapor micro-jet controls material redistribution in laser powder bed fusion additive manufacturing
Sonny Ly et al.
SCIENTIFIC REPORTS (2017)
An open-architecture metal powder bed fusion system for in-situ process measurements
P. Bidare et al.
ADDITIVE MANUFACTURING (2017)
On the use of spatter signature for in-situ monitoring of Laser Powder Bed Fusion
Giulia Repossini et al.
ADDITIVE MANUFACTURING (2017)
Falcon: Visual analysis of large, irregularly sampled, and multivariate time series data in additive manufacturing
Chad A. Steed et al.
COMPUTERS & GRAPHICS-UK (2017)
Additive manufacturing of metallic components by selective electron beam melting - a review
C. Koerner
INTERNATIONAL MATERIALS REVIEWS (2016)
Carers of older adults' satisfaction with public mental health service clinicians: a qualitative study
Terence V. McCann et al.
JOURNAL OF CLINICAL NURSING (2016)
In situ morphology-based defect detection of selective laser melting through inline coherent imaging
Jordan A. Kanko et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2016)
Thermographic measurements of the commercial laser powder bed fusion process at NIST
Brandon Lane et al.
RAPID PROTOTYPING JOURNAL (2016)
Review of in-situ process monitoring and in-situ metrology for metal additive manufacturing
Sarah K. Everton et al.
MATERIALS & DESIGN (2016)
In-process sensing in selective laser melting (SLM) additive manufacturing
Thomas G. Spears et al.
INTEGRATING MATERIALS AND MANUFACTURING INNOVATION (2016)
Development of experimental method for in situ distortion and temperature measurements during the laser powder bed fusion additive manufacturing process
A. J. Dunbar et al.
ADDITIVE MANUFACTURING (2016)
Closed-loop automatic feedback control in electron beam melting
Jorge Mireles et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2015)
Laser powder bed fusion additive manufacturing of metals; physics, computational, and materials challenges
W. E. King et al.
APPLIED PHYSICS REVIEWS (2015)
Investigation into spatter behavior during selective laser melting of AISI 316L stainless steel powder
Yang Liu et al.
MATERIALS & DESIGN (2015)
Process observation in fiber laser-based selective laser melting
Ulrich Thombansen et al.
OPTICAL ENGINEERING (2015)
Approximation of absolute surface temperature measurements of powder bed fusion additive manufacturing technology using in situ infrared thermography
Emmanuel Rodriguez et al.
ADDITIVE MANUFACTURING (2015)
In situ quality control of the selective laser melting process using a high-speed, real-time melt pool monitoring system
S. Clijsters et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2014)
Selective laser melting of Ti6Al4V alloy for biomedical applications: Temperature monitoring and microstructural evolution
I. Yadroitsev et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2014)
Distribution of the hematopoietic growth factor G-CSF and its receptor in the adult human brain with specific reference to Alzheimer's disease
Sami Ridwan et al.
JOURNAL OF ANATOMY (2014)
A Review on Process Monitoring and Control in Metal-Based Additive Manufacturing
Gustavo Tapia et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2014)
Investigations on Temperature Fields during Laser Beam Melting by Means of Process Monitoring and Multiscale Process Modelling
J. Schilp et al.
ADVANCES IN MECHANICAL ENGINEERING (2014)
Thermographic In-Situ Process Monitoring of the Electron Beam Melting Technology used in Additive Manufacturing
Ralph B. Dinwiddie et al.
THERMOSENSE: THERMAL INFRARED APPLICATIONS XXXV (2013)
Comprehensive Optical Monitoring of Selective Laser Melting
M. Doubenskaia et al.
JOURNAL OF LASER MICRO NANOENGINEERING (2012)
In situ flaw detection by IR-imaging during electron beam melting
Jan Schwerdtfeger et al.
RAPID PROTOTYPING JOURNAL (2012)
Detection of process failures in Layerwise Laser Melting with optical process monitoring
Tom Craeghs et al.
LASER ASSISTED NET SHAPE ENGINEERING 7 (LANE 2012) (2012)
Manufacturing by combining Selective Laser Melting and Selective Laser Erosion/laser re-melting
E. Yasa et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2011)
Determination of geometrical factors in Layerwise Laser Melting using optical process monitoring
Tom Craeghs et al.
OPTICS AND LASERS IN ENGINEERING (2011)
Statistical classification of spectral data for laser weld quality monitoring
A Ali et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2002)
分享论文
