相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。Effects of laser polishing on surface quality and mechanical properties of PLA parts built by fused deposition modeling
Lan Chen et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2020)
Fused deposition modelling: a review
Swapnil Vyavahare et al.
RAPID PROTOTYPING JOURNAL (2020)
Laser polishing of Cu/PLA composite parts fabricated by fused deposition modeling: Analysis of surface finish and mechanical properties
Lan Chen et al.
POLYMER COMPOSITES (2020)
Light-weight/defect-tolerant topologically self-interlocking polymeric structure by fused deposition modeling
Blake Hussey et al.
COMPOSITES PART B-ENGINEERING (2020)
Manufacturing complex Al2O3 ceramic structures using consumer-grade fused deposition modelling printers
Nicholas A. Conzelmann et al.
RAPID PROTOTYPING JOURNAL (2020)
3D printing of acellular scaffolds for bone defect regeneration: A review
Farnaz Ghorbani et al.
MATERIALS TODAY COMMUNICATIONS (2020)
Investigation into hydroxypropyl-methylcellulose-reinforced polylactide composites for fused deposition modelling
Guangpeng Jiang et al.
INDUSTRIAL CROPS AND PRODUCTS (2020)
Tensile Mechanical Behaviour of Multi-Polymer Sandwich Structures via Fused Deposition Modelling
David Moises Baca Lopez et al.
POLYMERS (2020)
Polymer-Bioactive Glass Composite Filaments for 3D Scaffold Manufacturing by Fused Deposition Modeling: Fabrication and Characterization
Thomas Distler et al.
FRONTIERS IN BIOENGINEERING AND BIOTECHNOLOGY (2020)
Polycaprolactone/polysaccharide functional composites for low-temperature fused deposition modelling
Yu-Qing Zhao et al.
BIOACTIVE MATERIALS (2020)
Preparation and in vitro evaluation of PLA/biphasic calcium phosphate filaments used for fused deposition modelling of scaffolds
P. Nevado et al.
MATERIALS SCIENCE AND ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2020)
Enhancement of fracture toughness under mixed mode loading of ABS specimens produced by 3D printing
Pietro Lanzillotti et al.
RAPID PROTOTYPING JOURNAL (2019)
Effect of Ultrasonic Vibration on Interlayer Adhesion in Fused Filament Fabrication 3D Printed ABS
Alireza Tofangchi et al.
POLYMERS (2019)
In-line rheological monitoring of fused deposition modeling
Timothy J. Coogan et al.
JOURNAL OF RHEOLOGY (2019)
Simulation of edge quality in fused deposition modeling
Antonio Armillotta
RAPID PROTOTYPING JOURNAL (2019)
A Computationally Efficient Finite Element Framework to Simulate Additive Manufacturing Processes
Shiyan Jayanath et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2018)
Numerical simulation of temperature field and stress field in fused deposition modeling
Huadong Yang et al.
JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY (2018)
The effect of process parameters in fused deposition modelling on bonding degree and mechanical properties
Hongbin Li et al.
RAPID PROTOTYPING JOURNAL (2018)
Micromechanics modeling of metallic alloys 3D printed by selective laser melting
Mohsen Taheri Andani et al.
MATERIALS & DESIGN (2018)
Rapid Prototyping and Its Role in Supporting Architectural Design Process
M. Sanem Bayar et al.
JOURNAL OF ARCHITECTURAL ENGINEERING (2018)
Chemical vapor treatment of ABS parts built by FDM: Analysis of surface finish and mechanical strength
Ashu Garg et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2017)
Simulation of metallic powder bed additive manufacturing processes with the finite element method: A critical review
Babis Schoinochoritis et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE (2017)
An insight to the failure of FDM parts under tensile loading: finite element analysis and experimental study
Ashu Garg et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2017)
Deformation and fatigue of tough 3D printed elastomer scaffolds processed by fused deposition modeling and continuous liquid interface production
Andrew T. Miller et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2017)
Healing simulation for bond strength prediction of FDM
Timothy J. Coogan et al.
RAPID PROTOTYPING JOURNAL (2017)
Experimental and numerical investigation of the thermal behaviour of polylactic acid during the fused deposition process
Xunfei Zhou et al.
VIRTUAL AND PHYSICAL PROTOTYPING (2017)
A review on composite materials and process parameters optimisation for the fused deposition modelling process
N. Mohan et al.
VIRTUAL AND PHYSICAL PROTOTYPING (2017)
Experimental Optimization of Fused Deposition Modelling Processing Parameters: a Design-for-Manufacturing Approach
Ala'aldin Alafaghani et al.
45TH SME NORTH AMERICAN MANUFACTURING RESEARCH CONFERENCE (NAMRC 45) (2017)
Multiscale Modeling of Powder Bed-Based Additive Manufacturing
Matthias Markl et al.
ANNUAL REVIEW OF MATERIALS RESEARCH, VOL 46 (2016)
Anisotropic damage inferred to 3D printed polymers using fused deposition modelling and subject to severe compression
Sofiane Guessasma et al.
EUROPEAN POLYMER JOURNAL (2016)
Theoretical-experimental evaluation of different biomaterials for parts obtaining by fused deposition modeling
Z. Ortega et al.
MEASUREMENT (2016)
A Lower Temperature FDM 3D Printing for the Manufacture of Patient-Specific Immediate Release Tablets
Tochukwu C. Okwuosa et al.
PHARMACEUTICAL RESEARCH (2016)
Development of rapid tooling using fused deposition modeling: a review
Kamaljit Singh Boparai et al.
RAPID PROTOTYPING JOURNAL (2016)
Design for manufacturing of surfaces to improve accuracy in Fused Deposition Modeling
Alberto Boschetto et al.
ROBOTICS AND COMPUTER-INTEGRATED MANUFACTURING (2016)
Temperature Analysis in the Fused Deposition Modeling Process
Yong Zhou et al.
2016 3RD INTERNATIONAL CONFERENCE ON INFORMATION SCIENCE AND CONTROL ENGINEERING (ICISCE) (2016)
Significance of pore percolation to drive anisotropic effects of 3D printed polymers revealed with X-ray μ-tomography and finite element computation
Sofiane Guessasma et al.
POLYMER (2015)
Mechanical property characterization and simulation of fused deposition modeling Polycarbonate parts
Miquel Domingo-Espin et al.
MATERIALS & DESIGN (2015)
Fused deposition modeling with polypropylene
O. S. Carneiro et al.
MATERIALS & DESIGN (2015)
Numerical investigation on mechanical properties of cellular lattice structures fabricated by fused deposition modeling
M. R. Karamooz Ravari et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2014)
Mesoscopic simulation model of selective laser melting of stainless steel powder
Saad A. Khairallah et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2014)
Modelling for randomly oriented multi material additive manufacturing component and its fabrication
M. Sugavaneswaran et al.
MATERIALS & DESIGN (2014)
Design and implementation of a cloud computing service for finite element analysis
Ismail Ari et al.
ADVANCES IN ENGINEERING SOFTWARE (2013)
Surface roughness prediction in fused deposition modelling by neural networks
A. Boschetto et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2013)
Biodegradable and bioactive porous scaffold structures prepared using fused deposition modeling
Jyrki Korpela et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS (2013)
Structural characteristics of fused deposition modeling polycarbonate material
Walter Castro Smith et al.
POLYMER TESTING (2013)
Some investigations for small-sized product fabrication with FDM for plastic components
Rupinder Singh
RAPID PROTOTYPING JOURNAL (2013)
Comparative between FEM models for FDM parts and their approach to a real mechanical behaviour.
J. Martinez et al.
MANUFACTURING ENGINEERING SOCIETY INTERNATIONAL CONFERENCE, (MESIC 2013) (2013)
Phase-field simulation of solidification morphology in laser powder deposition of Ti-Nb alloys
V. Fallah et al.
ACTA MATERIALIA (2012)
Mesoscopic simulation of selective beam melting processes
Carolin Koerner et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2011)
Thermo-mechanical properties of a highly filled polymeric composites for Fused Deposition Modeling
M. Nikzad et al.
MATERIALS & DESIGN (2011)
Dendrite growth simulation during solidification in the LENS process
H. Yin et al.
ACTA MATERIALIA (2010)
A review on stereolithography and its applications in biomedical engineering
Ferry P. W. Melchels et al.
BIOMATERIALS (2010)
A parallel direct solver for the self-adaptive hp Finite Element Method
Maciej Paszynski et al.
JOURNAL OF PARALLEL AND DISTRIBUTED COMPUTING (2010)
Composites by rapid prototyping technology
S. Kumar et al.
MATERIALS & DESIGN (2010)
Three-dimensional finite element analysis simulations of the fused deposition modelling process
Y. Zhang et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE (2006)
Parametric finite element analysis of stress evolution during friction stir welding
C. M. Chen et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE (2006)
Rapid and cost-effective manufacturing of high-integrity aerospace components
V Raja et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2006)
Optimum part deposition orientation in fused deposition modeling
K Thrimurthulu et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2004)
Anisotropic tensile failure model of rapid prototyping parts - Fused Deposition Modeling (FDM)
SH Ahn et al.
INTERNATIONAL JOURNAL OF MODERN PHYSICS B (2003)
Mechanical characterization of parts fabricated using fused deposition modeling
A Bellini et al.
RAPID PROTOTYPING JOURNAL (2003)
New trends in rapid product development
A Bernard et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2002)