相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。Tension-compression asymmetry and the underlying slip/twinning activity in extruded Mg - Y sheets
D. D. Yin et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2021)
Investigation on the Creep Behavior of AZ91 Magnesium Alloy Processed by Severe Plastic Deformation
Iraj Khoubrou et al.
METALS AND MATERIALS INTERNATIONAL (2020)
Microstructure, mechanical properties and bio-corrosion properties of Mg-HA bionanocomposites fabricated by a novel severe plastic deformation process
H. Torabi et al.
CERAMICS INTERNATIONAL (2020)
Microstructure and anisotropic mechanical behavior of the high-strength and ductility AZ91 Mg alloy processed by hot extrusion and multi-pass RD-ECAP
Bingqian Xu et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)
Tension-compression asymmetry of ⟨c plus a⟩ slip in Ti-6Al
William Roberts et al.
SCRIPTA MATERIALIA (2020)
Isothermal Continuous Equal Channel Angular Pressing of Magnesium Alloy AZ31
Casey F. Davis et al.
JOM (2020)
Decade of Twist Channel Angular Pressing: A Review
Adela Machackova
MATERIALS (2020)
ZnMg0.8Ca0.2 (wt%) biodegradable alloy - The influence of thermal treatment and extrusion on microstructural and mechanical characteristics
Jaroslav Capek et al.
MATERIALS CHARACTERIZATION (2020)
Microstructure evolution and mechanical properties of an AZ61 alloy processed with TS-ECAP and EPT
Zhaohui Shan et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)
Investigation of severe plastic deformation effects on microstructure and mechanical properties of WS2/AZ91 magnesium metal matrix composites
Aqeel Abbas et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)
Dynamic recrystallization of pure zinc during high strain-rate compression at ambient temperature
Shiyang Liu et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)
Development of high-performance Mg-Zn-Ca-Mn alloy via an extrusion process at relatively low temperature
L. B. Tong et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2020)
Extrusion of the biodegradable ZnMg0.8Ca0.2 alloy - The influence of extrusion parameters on microstructure and mechanical characteristics
Jaroslav Capek et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2020)
Analysis of microstructural evolution and compressive properties for pure Mg after room-temperature ECAP
Weiwei Lei et al.
MATERIALS LETTERS (2020)
Achieving enhanced mechanical properties in Mg-Gd-Y-Zn-Mn alloy by altering dynamic recrystallization behavior via pre-ageing treatment
Kui Wang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)
Biodegradable Zn-1.5Cu-1.5Ag alloy with anti-aging ability and strain hardening behavior for cardiovascular stents
Chun Chen et al.
MATERIALS SCIENCE AND ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2020)
Anisotropy of fracture in hexagonal metals
V. Paidar et al.
INTERNATIONAL JOURNAL OF FRACTURE (2020)
Can zinc alloys be strengthened by grain refinement? A critical evaluation of the processing of low-alloyed binary zinc alloys using ECAP
Wiktor Bednarczyk et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Effective grain refinement of pure Cu processed by new route of equal channel angular pressing
Hongfei Wang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Determination of room-temperature superplastic asymmetry and anisotropy of Zn-0.8Ag alloy processed by ECAP
Wiktor Bednarczyk et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Effect of grain refinement on material properties of Mg-8%Al-0.5%Zn alloy after the combined processes of multi-direction forging and equal channel angular pressing
Gajanan M. Naik et al.
MATERIALS RESEARCH EXPRESS (2019)
Texture evolution of an A1-8Zn alloy during ECAP and post-ECAP isothermal annealing
Hailong Jia et al.
MATERIALS CHARACTERIZATION (2019)
Evolution of Mg-Zn second phases during ECAP at different processing temperatures and its impact on mechanical properties of Zn-1.6Mg (wt.%) alloys
Huan Liu et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2019)
Biodegradable magnesium alloys as temporary orthopaedic implants: a review
Sepideh Kamrani et al.
BIOMETALS (2019)
Effect of equal channel angular pressing (ECAP) on the evolution of texture, microstructure and mechanical properties in the Al-Cu-Li alloy AA2195
M. Suresh et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2019)
Strain hardening of as-extruded Mg-xZn (x=1, 2, 3 and 4 wt%) alloys
Chaoyue Zhao et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2019)
Fundamental Theory of Biodegradable Metals-Definition, Criteria, and Design
Yang Liu et al.
ADVANCED FUNCTIONAL MATERIALS (2019)
Effects of deformation twinning on the mechanical properties of biodegradable Zn-Mg alloys
Shiyang Liu et al.
BIOACTIVE MATERIALS (2019)
A combined strategy to enhance the properties of Zn by laser rapid solidification and laser alloying
Youwen Yang et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2018)
Achieving room temperature superplasticity in the Zn-0.5Cu alloy processed via equal channel angular pressing
Wiktor Bednarczyk et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
Secondary twinning in zinc
Vaclav Paidar et al.
PHILOSOPHICAL MAGAZINE LETTERS (2018)
Texture and microstructure evolution of pure zinc during rolling at liquid nitrogen temperature and subsequent annealing
S. K. Sahoo et al.
MATERIALS CHARACTERIZATION (2017)
Influence of grain boundary misorientations on the mechanical behavior of a near-α Ti-6A1-7Nb alloy processed by ECAP
V. V. Polyakova et al.
MATERIALS LETTERS (2017)
An Investigation of mechanical properties in accumulative roll bonded nano-grained pure titanium
Arash Fattah-alhosseini et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
Tens ion-compression asymmetry in yielding and strain hardening behavior of CP-Ti at room temperature
Peng Lin et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
The Prospects of Zinc as a Structural Material for Biodegradable Implants-A Review Paper
Galit Katarivas Levy et al.
METALS (2017)
A Critical Review of Mg-Based Hydrogen Storage Materials Processed by Equal Channel Angular Pressing
Lisha Wang et al.
METALS (2017)
Strain distribution and failure mode in single point incremental forming (SPIF) of multiple commercially pure aluminum sheets
C. Raju et al.
JOURNAL OF MANUFACTURING PROCESSES (2017)
Development of magnesium-based biodegradable metals with dietary trace element germanium as orthopaedic implant applications
Dong Bian et al.
ACTA BIOMATERIALIA (2017)
Processing of Zn-3Mg alloy by equal channel angular pressing for biodegradable metal implants
Murtala Sule Dambatta et al.
JOURNAL OF KING SAUD UNIVERSITY SCIENCE (2017)
A comprehensive review of the role of zinc in normal prostate function and metabolism; and its implications in prostate cancer
Leslie C. Costello et al.
ARCHIVES OF BIOCHEMISTRY AND BIOPHYSICS (2016)
Effects of alloying elements (Ca and Sr) on microstructure, mechanical property and in vitro corrosion behavior of biodegradable Zn-1.5Mg alloy
Xiwei Liu et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2016)
Novel Zn-based alloys for biodegradable stent applications: Design, development and in vitro degradation
E. Mostaed et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2016)
Microstructure, mechanical properties, in vitro degradation behavior and hemocompatibility of novel Zn-Mg-Sr alloys as biodegradable metals
Xiwei Liu et al.
MATERIALS LETTERS (2016)
Structure, mechanical characteristics and in vitro degradation, cytotoxicity, genotoxicity and mutagenicity of novel biodegradable Zn-Mg alloys
J. Kubasek et al.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2016)
Biodegradable Metals for Cardiovascular Stents: from Clinical Concerns to Recent Zn-Alloys
Patrick K. Bowen et al.
ADVANCED HEALTHCARE MATERIALS (2016)
Micro-alloying with Mn in Zn-Mg alloy for future biodegradable metals application
Xiwei Liu et al.
MATERIALS & DESIGN (2016)
A review on wrought magnesium alloys processed by equal channel angular pressing
Muralidhar Avvari et al.
INTERNATIONAL JOURNAL OF MATERIALS & PRODUCT TECHNOLOGY (2015)
In vitro biodegradation behavior, mechanical properties, and cytotoxicity of biodegradable Zn-Mg alloy
Haibo Gong et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS (2015)
Development of biodegradable Zn-1X binary alloys with nutrient alloying elements Mg, Ca and Sr
H. F. Li et al.
SCIENTIFIC REPORTS (2015)
Ultrafine-grain metals by severe plastic deformation
Laszlo S. Toth et al.
MATERIALS CHARACTERIZATION (2014)
Biodegradable metals
Y. F. Zheng et al.
MATERIALS SCIENCE & ENGINEERING R-REPORTS (2014)
Reduction in tension-compression asymmetry via grain refinement and texture design in Mg-3Al-1Zn sheets
E. Dogan et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2014)
Dynamic and post-dynamic recrystallization under hot, cold and severe plastic deformation conditions
Taku Sakai et al.
PROGRESS IN MATERIALS SCIENCE (2014)
Progress of biodegradable metals
Huafang Li et al.
PROGRESS IN NATURAL SCIENCE-MATERIALS INTERNATIONAL (2014)
Comparative in vitro Study on Pure Metals (Fe, Mn, Mg, Zn and W) as Biodegradable Metals
J. Cheng et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2013)
ECAP - New consolidation method for production of aluminium matrix composites with ceramic reinforcement
Mateja Snajdar Musa et al.
PROCESSING AND APPLICATION OF CERAMICS (2013)
A review on strontium ranelate long-term antifracture efficacy in the treatment of postmenopausal osteoporosis
Luisella Cianferotti et al.
THERAPEUTIC ADVANCES IN MUSCULOSKELETAL DISEASE (2013)
On the minimum grain size obtainable by high-pressure torsion
Farghalli A. Mohamed et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2012)
TOPAS: An innovative proton Monte Carlo platform for research and clinical applications
J. Perl et al.
MEDICAL PHYSICS (2012)
Mechanical and corrosion properties of newly developed biodegradable Zn-based alloys for bone fixation
D. Vojtech et al.
ACTA BIOMATERIALIA (2011)
Biodegradable Metals for Cardiovascular Stent Application: Interests and New Opportunities
Maryam Moravej et al.
INTERNATIONAL JOURNAL OF MOLECULAR SCIENCES (2011)
Microstructural evolution during the annealing of an extruded AZ31 magnesium alloy
Sangbong Yi et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2010)
Effect of faceting on twin grain boundary motion in zinc
Vera G. Sursaeva
MATERIALS LETTERS (2010)
Universal scaling of work hardening parameters in type 316L(N) stainless steel
E. Isaac Samuel et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2010)
Particle effects on recrystallization in magnesium-manganese alloys: Particle-stimulated nucleation
J. D. Robson et al.
ACTA MATERIALIA (2009)
Influence of extrusion parameters on microstructure and texture developments, and their effects on mechanical properties of the magnesium alloy AZ80
Muhammad Shahzad et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2009)
Determination of strain-hardening exponent using double compression test
R. Ebrahimi et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2009)
Texture evolution in equal-channel angular extrusion
Irene J. Beyerlein et al.
PROGRESS IN MATERIALS SCIENCE (2009)
Biomaterials in orthopaedics
M. Navarro et al.
JOURNAL OF THE ROYAL SOCIETY INTERFACE (2008)
Effects of zinc on the mineralization of bone nodules from human osteoblast-like cells
Aleksandra Cerovic et al.
BIOLOGICAL TRACE ELEMENT RESEARCH (2007)
Magnesium and its alloys as orthopedic biomaterials: A review
MP Staiger et al.
BIOMATERIALS (2006)
Effect of grain refinement on fracture toughness in extruded pure magnesium
H Somekawa et al.
SCRIPTA MATERIALIA (2005)
Observation of tension-compression asymmetry in α and α/β titanium alloys
T Neeraj et al.
PHILOSOPHICAL MAGAZINE (2005)
Intermetallic particle evolution during ECAP processing of a 6082 alloy
G Angella et al.
MATERIALS TRANSACTIONS (2004)
Determination of plastic properties of metals by instrumented indentation using different sharp indenters
JL Bucaille et al.
ACTA MATERIALIA (2003)
Dynamic continuous recrystallization characteristics in two stage deformation of Mg-3A1-lZn alloy sheet
JC Tan et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2003)
Effect of temperature and shear direction on yield stress by {11(2)over-bar2}<(11)over-bar23 > slip in HCP metals
H Tonda et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2002)
Review: Processing of metals by equal-channel angular pressing
M Furukawa et al.
JOURNAL OF MATERIALS SCIENCE (2001)
分享论文
