相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。Suppressing precipitation during the reverse transformation from martensite to austenite in a cold-rolled austenite stainless steel
Xuebing Liu et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)
Achieving outstanding combination of strength and ductility of the Al-Mg-Li alloy by cold rolling combined with electropulsing assisted treatment
Han Xiao et al.
MATERIALS & DESIGN (2020)
Phase-field simulation of austenite reversion in a Fe-9.6Ni-7.1Mn (at%) martensitic steel governed by a coupled diffusional/displacive mechanism
Xing Zhang et al.
MATERIALS & DESIGN (2020)
Combined athermal and isothermal martensite to austenite reversion kinetics, experiment and modelling
H. Kooiker et al.
MATERIALS & DESIGN (2020)
Fundamentals of isothermal austenite reversion in a Ti-stabilized 12Cr-6 Ni-2 Mo super martensitic stainless steel: Thermodynamics versus experimental assessments
J. D. Escobar et al.
ACTA MATERIALIA (2019)
Tailoring the microstructure and mechanical properties of AISI 316L austenitic stainless steel via cold rolling and reversion annealing
Sara Kheiri et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
The effect of annealing on the microstructural evolution and mechanical properties in phase reversed 316LN austenitic stainless steel
D. M. Xu et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
Hardening and softening mechanisms in a nano-lamellar austenitic steel induced by electropulsing treatment
Y. R. Ma et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
The significant role of heating rate on reverse transformation and coordinated straining behavior in a cold-rolled austenitic stainless steel
G. -S. Sun et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
Exceptional mechanical properties of ultra-fine grain AZ31 alloy by the combined processing of ECAP, rolling and EPT
Guangwei Zhao et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
Microstructural Evolutions During Reversion Annealing of Cold-Rolled AISI 316 Austenitic Stainless Steel
Meysam Naghizadeh et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2018)
An ultrafast performance regeneration of aged stainless steel by pulsed electric current
Xuebing Liu et al.
SCRIPTA MATERIALIA (2018)
Deformation behavior of high yield strength - High ductility ultrafine-grained 316LN austenitic stainless steel
D. M. Xu et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
Evolution of microstructure and mechanical properties in a cold deformed nitrogen bearing TRIP-assisted duplex stainless steel after reversion annealing
Mohammad Moallemi et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
Ultrastrong steel via minimal lattice misfit and high-density nanoprecipitation
Suihe Jiang et al.
NATURE (2017)
Bone-like crack resistance in hierarchical metastable nanolaminate steels
Motomichi Koyama et al.
SCIENCE (2017)
Microstructure and texture evolution of cold-rolled Mg-3Al-1Zn alloy by electropulse treatment stimulating recrystallization
Xiaopei Li et al.
SCRIPTA MATERIALIA (2016)
Nano/ultrafine grained austenitic stainless steel through the formation and reversion of deformation-induced martensite: Mechanisms, microstructures, mechanical properties, and TRIP effect
M. Shirdel et al.
MATERIALS CHARACTERIZATION (2015)
Brittle intermetallic compound makes ultrastrong low-density steel with large ductility
Sang-Heon Kim et al.
NATURE (2015)
The effects of the heating rate on the reverse transformation mechanism and the phase stability of reverted austenite in medium Mn steels
Jeongho Han et al.
ACTA MATERIALIA (2014)
Strain hardening behavior of phase reversion-induced nanograined/ultrafine-grained (NG/UFG) austenitic stainless steel and relationship with grain size and deformation mechanism
V. S. A. Challa et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2014)
Electric current-induced annealing during uniaxial tension of aluminum alloy
Moon-Jo Kim et al.
SCRIPTA MATERIALIA (2014)
Nanoscale austenite reversion through partitioning, segregation and kinetic freezing: Example of a ductile 2 GPa Fe-Cr-C steel
L. Yuan et al.
ACTA MATERIALIA (2012)
Martensite -> austenite phase transformation kinetics in an ultrafine-grained metastable austenitic stainless steel
S. Rajasekhara et al.
ACTA MATERIALIA (2011)
Design of a novel Mn-based 1 GPa duplex stainless TRIP steel with 60% ductility by a reduction of austenite stability
C. Herrera et al.
ACTA MATERIALIA (2011)
Stress-Induced Martensitic Transformation Behaviors at Various Temperatures and Their TRIP Effects in SUS304 Metastable Austenitic Stainless Steel
Noriyuki Tsuchida et al.
ISIJ INTERNATIONAL (2011)
Influence of electropulsing treatment on microstructure and mechanical properties of cold-rolled Mg-9Al-1Zn alloy strip
Yanbin Jiang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2011)
Thermal stability of ultrafine-grained austenitic stainless steels
A. Etienne et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2010)
Martensite shear phase reversion-induced nanograined/ultrafine-grained Fe-16Cr-10Ni alloy: The effect of interstitial alloying elements and degree of austenite stability on phase reversion
R. D. K. Misra et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2010)
Nanograined/Ultrafine-Grained Structure and Tensile Deformation Behavior of Shear Phase Reversion-Induced 301 Austenitic Stainless Steel
R. D. K. Misra et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2010)
Reverse transformation mechanism of martensite to austenite in a metastable austenitic alloy
Seok-Jae Lee et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2009)
Enhanced Mechanical Properties through Reversion in Metastable Austenitic Stainless Steels
M. C. Somani et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2009)
Inverse temperature dependence of toughness in an ultrafine grain-structure steel
Yuuji Kimura et al.
SCIENCE (2008)
Creep-resistant, Al2O3-forming austenitic stainless steels
Y. Yamamoto et al.
SCIENCE (2007)
Influence of annealing treatment on the formation of nano/submicron grain size AISI 301 austenitic stainless steels
D. L. Johannsen et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2006)
Amount of retained austenite at room temperature after reverse transformation of martensite to austenite in an Fe-13%Cr-7%Ni-3%Si martensitic stainless steel
DS Leem et al.
SCRIPTA MATERIALIA (2001)
Crystallography and structural evolution during reverse transformation in an Fe-17Cr-0.5C tempered martensite
DV Shtansky et al.
ACTA MATERIALIA (2000)