相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。Evolution mechanisms of recrystallized grains and twins during isothermal compression and subsequent solution treatment of GH4586 superalloy
Jin Yang et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2021)
Suppression of adiabatic shear band formation by martensitic transformation of retained austenite during split Hopkinson pressure bar test for a high-strength bainitic steel
Selim Kim et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)
Strain rate dependency of dislocation plasticity
Haidong Fan et al.
NATURE COMMUNICATIONS (2021)
Effect of strain and strain rate on the development of deformation heterogeneity during tensile deformation of a solution annealed 304 LN austenitic stainless steel: An EBSD study
Amrita Kundu et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)
Understanding of adiabatic shear band evolution during high-strain-rate deformation in high-strength armor steel
Min Cheol Jo et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2020)
In situ EBSD study of deformation behavior of primary α phase in a bimodal Ti-6Al-4V alloy during uniaxial tensile tests
Wansong Li et al.
MATERIALS CHARACTERIZATION (2020)
Dynamic tensile properties and microstructural evolution of extruded EW75 magnesium alloy at high strain rates
Jincheng Yu et al.
JOURNAL OF MAGNESIUM AND ALLOYS (2020)
Martensite tempering kinetics: Effects of dislocation density and heating rates
D. C. Saha et al.
MATERIALS CHARACTERIZATION (2020)
Precise measurement of strain accommodation in a Mg-Gd-Y-Zn alloy using cross-correlation-based high resolution EBSD
Shaosong Jiang et al.
MATERIALS CHARACTERIZATION (2020)
Fragmentation studies by non-explosive cylinder expansion technique
Prakash Rao et al.
INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2020)
The Influence of Different Microstructure on Tensile Deformation and Acoustic Emission Behaviors of Low-Alloy Steel
Wenbin Ma et al.
MATERIALS (2020)
Development of Low-Alloy Steels with High Strength and Good Ductility with the Aid of Nanoscale Troostite
J. W. Liang et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2019)
Hot deformation of alumina-forming austenitic steel: EBSD study and flow behavior
Qiuzhi Gao et al.
JOURNAL OF MATERIALS SCIENCE (2019)
Nanoindentation characterization of strengthening mechanism in a high strength ferrite/martensite steel
Lijuan Zhang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Deformation twinning in a mild steel: Loading dependence and strengthening
Z. H. Zeng et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Recrystallization behavior during hot tensile deformation of TA15 titanium alloy sheet with substantial prior deformed substructures
Jie Zhao et al.
MATERIALS CHARACTERIZATION (2019)
Superior mechanical properties and deformation mechanisms of heterogeneous laminates under dynamic shear loading
Jinyan He et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Creation of heterogeneous microstructures in copper using high-pressure torsion to enhance mechanical properties
Maryam Jamalian et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Fracture mechanism of steel plate loaded by explosive-induced shock waves
Jianqiao Li et al.
ENGINEERING FAILURE ANALYSIS (2019)
Effect of hydrogen and strain rate on nanoindentation creep of austenitic stainless steel
Yuanjian Hong et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2019)
Hot Deformation Behavior of V Micro-Alloyed TWIP Steel During Hot Compression
Hojun Gwon et al.
METALS AND MATERIALS INTERNATIONAL (2019)
Dynamic shear deformation of a CrCoNi medium-entropy alloy with heterogeneous grain structures
Yan Ma et al.
ACTA MATERIALIA (2018)
Effect of Part/Die Boundary Conditions on Microstructural Evolution during Hot Stamping 2000 MPa Class Boron Steel
Tom Taylor et al.
STEEL RESEARCH INTERNATIONAL (2018)
Hot Deformation Behavior and Microstructural Evolution of SA508-IV Steel
Xin Dai et al.
STEEL RESEARCH INTERNATIONAL (2018)
Formation of Dislocations in the Growth of Silicon along Different Crystallographic Directions-A Molecular Dynamics Study
Naigen Zhou et al.
CRYSTALS (2018)
Flow stress and dynamic recrystallization behavior of A1-9Mg-1.1Li-0.5Mn alloy during hot compression process
Xi-hong Chen et al.
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2018)
An investigation of microstructural evolution in 304L austenitic stainless steel warm deformed by cyclic channel die compression
S. S. Satheesh Kumar et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2017)
High-temperature tensile deformation behavior and microstructure evolution of Ti55 titanium alloy
Zhangguang Liu et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
Enhanced quasi-static and dynamic shear properties by heterogeneous gradient and lamella structures in 301 stainless steels
Junxia Xing et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
Microstructure evolution of depleted uranium impacted by steel projectile at velocity of 50 m/s
Dong-li Zou et al.
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2017)
Gradient structure produces superior dynamic shear properties
Xiangde Bian et al.
MATERIALS RESEARCH LETTERS (2017)
Mechanical properties of copper/bronze laminates: Role of interfaces
Xiaolong Ma et al.
ACTA MATERIALIA (2016)
Deformation analysis of ferrite/pearlite banded structure under uniaxial tension using digital image correlation
Xiaochuan Zhang et al.
OPTICS AND LASERS IN ENGINEERING (2016)
Improved Method Used to Investigate the Dynamic Shear Failure of AISI 1045 Steel Cylinder Under Blast Loading
Minzu Liang et al.
INTERNATIONAL JOURNAL OF APPLIED MECHANICS (2016)
EBSD analysis of plastic deformation of copper foils by flexible pad laser shock forming
Balasubramanian Nagarajan et al.
APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING (2015)
Twinning behavior and lattice rotation in a Mg-Gd-Y-Zr alloy under ballistic impact
Xiaoying Shi et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2015)
Evolution of recrystallization microstructure and texture during rapid annealing in strip-cast non-oriented electrical steels
Feng Fang et al.
JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS (2015)
Corrosion Behavior of High-Strength Bainitic Rail Steels
A. P. Moon et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2015)
Attenuation of the Dynamic Yield Point of Shocked Aluminum Using Elastodynamic Simulations of Dislocation Dynamics
Benat Gurrutxaga-Lerma et al.
PHYSICAL REVIEW LETTERS (2015)
Effects of U-notches on the dynamic fracture and fragmentation Of explosively driven cylinders
Minzu Liang et al.
THEORETICAL AND APPLIED FRACTURE MECHANICS (2015)
Analysis of the variation in nanohardness of pearlitic steel: Influence of the interplay between ferrite crystal orientation and cementite morphology
Jolien Debehets et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2014)
Structure of the Martensite-Austenite Transition Zone After a Local Pulse Heating of the Martensite
E. N. Blinova et al.
RUSSIAN PHYSICS JOURNAL (2014)
Application of generalized non-Schmid yield law to low-temperature plasticity in bcc transition metals
H. Lim et al.
MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING (2013)
In-situ EBSD study of the active slip systems and lattice rotation behavior of surface grains in aluminum alloy during tensile deformation
P. Chen et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2013)
Effects of Rolling Processes on Yield Ratio and Formability of Hot Rolled Gas Cylinder Steel
Jia Yue-cai et al.
JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL (2012)
Microstructure and mechanical properties of UFG medium carbon steel processed by HPT at increased temperature
Jozef Zrnik et al.
JOURNAL OF MATERIALS SCIENCE (2010)
Microstructure evolution of adiabatic shear bands in AM60B magnesium alloy under ballistic impact
L. Zhen et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2010)
Orientation gradients and geometrically necessary dislocations in ultrafine grained dual-phase steels studied by 2D and 3D EBSD
Marion Calcagnotto et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2010)
Survey of computed grain boundary properties in face-centered cubic metals-II: Grain boundary mobility
David L. Olmsted et al.
ACTA MATERIALIA (2009)
Distribution characterization of boundary misorientation angle of 7050 aluminum alloy after high-temperature compression
Liang Zhen et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2009)
Dislocation motion in high strain-rate deformation
Z. Q. Wang et al.
PHILOSOPHICAL MAGAZINE (2007)
Structure and nucleation mechanisms of misfit dislocations in epitaxial FCC thin films with positive and negative mismatches
Naigen Zhou et al.
MATERIALS CHEMISTRY AND PHYSICS (2006)
Transition between low and high angle grain boundaries
M Winning et al.
ACTA MATERIALIA (2005)
Grain-boundary character and grain growth in bulk tin and bulk lead-free solder alloys
AU Telang et al.
JOURNAL OF ELECTRONIC MATERIALS (2004)
Evolution of recrystallization texture in nonoriented electrical steels
JT Park et al.
ACTA MATERIALIA (2003)
Geometrically necessary dislocations and strain-gradient plasticity: a few critical issues
LP Kubin et al.
SCRIPTA MATERIALIA (2003)
Morphological evolution of banding structures at high solidification velocity
GH Duan et al.
MATERIALS LETTERS (2003)
Nanohardness measurement of high-purity Fe-C martensite
T Ohmura et al.
SCRIPTA MATERIALIA (2001)
分享论文
