相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。Methods and mechanisms for uniformly refining deformed mixed and coarse grains inside a solution-treated Ni-based superalloy by two-stage heat treatment
Guan-Qiang Wang et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2021)
Plastic deformation behavior of a nickel-based superalloy on the mesoscopic scale
Qiang Zhu et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2020)
Unexpected formation of delta (δ) phase in as-cast niobium-bearing superalloy at solution annealing temperatures
Mohammad Javad Sohrabi et al.
MATERIALS LETTERS (2020)
A physical-based constitutive model considering the motion of dislocation for Ni3Al-base superalloy
Jianfeng Xiao et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)
Influence of cold rolling deformation mechanisms on the grain refinement of Fe-15Mn-10Cr-8Ni-4Si austenitic alloy
Ilya Nikulin et al.
MATERIALS CHARACTERIZATION (2020)
Hot deformation behavior and workability of a Ni-Co based superalloy
Peng Liu et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2020)
Grain refinement process in a cold-rolled polycrystalline cobalt
Xinglong An et al.
MATERIALS CHARACTERIZATION (2020)
In-situ observation of grain refinement dynamics of hypoeutectic Al-Si alloy inoculated by Al-Ti-Nb-B alloy
Jin Xu et al.
SCRIPTA MATERIALIA (2020)
Novel Al-Ti-Nb-B grain refiners with superior efficiency for Al-Si alloys
Yang Li et al.
SCRIPTA MATERIALIA (2020)
The dislocation behaviour and GND development in a nickel based superalloy during creep
Soran Birosca et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2019)
Influence of grain size on the small fatigue crack initiation and propagation behaviors of a nickel-based superalloy at 650 °C
Xumin Zhu et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2019)
Formation mechanism of large grains inside annealed microstructure of GH4169 superalloy by cellular automation method
Ming-Song Chen et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2019)
High-temperature deformation mechanisms and physical-based constitutive modeling of ultra-supercritical rotor steel
Fei Chen et al.
JOURNAL OF MANUFACTURING PROCESSES (2019)
Microstructural evolution and grain refinement mechanisms of a Ni-based superalloy during a two-stage annealing treatment
Ming-Song Chen et al.
MATERIALS CHARACTERIZATION (2019)
Precipitation behavior of a β-quenched Ti-5Al-5Mo-5V-1Cr-1Fe alloy during high-temperature compression
Qian-Wei Wang et al.
MATERIALS CHARACTERIZATION (2019)
Precipitation and dissolution behaviors of δ phase inside a deformed nickel-based superalloy during annealing treatment
Ming-Song Chen et al.
APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING (2019)
Micro-mechanisms and precipitation kinetics of delta (δ) phase in Inconel 718 superalloy during aging
Mohsen Rafiei et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2019)
Influence of strain rate on subsolvus dynamic and post-dynamic recrystallization kinetics of Inconel 718
A. Nicolay et al.
ACTA MATERIALIA (2019)
Annealing Treatment Methods and Mechanisms for Refining Mixed and Coarse Grains in a Solution Treatment Nickel-Based Superalloy
Ming-Song Chen et al.
ADVANCED ENGINEERING MATERIALS (2019)
Microstructure, precipitates and mechanical properties of powder bed fused inconel 718 before and after heat treatment
Le Zhou et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2019)
New insights on the relationship between flow stress softening and dynamic recrystallization behavior of magnesium alloy AZ31B
Ming-Song Chen et al.
MATERIALS CHARACTERIZATION (2019)
Dynamic recrystallization in Mone1400 Ni-Cu alloy: Mechanism and role of twinning
G. R. Ebrahimi et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Study on Dynamic Recrystallization Behaviors in a Hot-Deformed FB2 Ultra-supercritical Rotor Steel
Fei Chen et al.
METALLOGRAPHY MICROSTRUCTURE AND ANALYSIS (2019)
Analysis of dynamic recrystallization behaviors in resistance heating compressions of heat-resistant alloy by multi-field and multi-scale coupling method
Guo-zheng Quan et al.
COMPUTATIONAL MATERIALS SCIENCE (2018)
Tensile, creep behavior and microstructure evolution of an as-cast Ni-based K417G polycrystalline superalloy
Beining Du et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2018)
Effects of annealing parameters on microstructural evolution of a typical nickel-based superalloy during annealing treatment
Ming-Song Chen et al.
MATERIALS CHARACTERIZATION (2018)
Investigation on strain dependence of metadynamic recrystallization behaviors of GH4169 superalloy
Xiao-Min Chen et al.
VACUUM (2018)
Hot deformation behavior and constitutive model of GH4169 superalloy for linear friction welding process
Peihao Geng et al.
JOURNAL OF MANUFACTURING PROCESSES (2018)
Microstructural evolution and support vector regression model for an aged Ni-based superalloy during two-stage hot forming with stepped strain rates
Dao-Guang He et al.
MATERIALS & DESIGN (2018)
Crack closure effect and crack growth behavior in GH2036 superalloy plates under combined high and low cycle fatigue
Dianyin Hu et al.
INTERNATIONAL JOURNAL OF FATIGUE (2017)
Work hardening characteristics and microstructural evolution during hot deformation of a nickel superalloy at moderate strain rates
S. S. Satheesh Kumar et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2017)
The processing map and microstructure evolution of Ni-Cr-Mo-based C276 superalloy during hot compression
Chi Zhang et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2017)
Correspondence between grain refinements and flow softening behaviors at Nimonic 80A superalloy under different strain rates, temperatures and strains
Guo-zheng Quan et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
A new dynamic recrystallization kinetics model for a Nb containing Ni-Fe-Cr-base superalloy considering influences of initial δ phase
Dong-Xu Wen et al.
VACUUM (2017)
A new method to establish dynamic recrystallization kinetics model of a typical solution-treated Ni-based superalloy
Ming-Song Chen et al.
COMPUTATIONAL MATERIALS SCIENCE (2016)
Plastic deformation and dynamic recrystallization of a powder metallurgical nickel-based superalloy
Yanhui Liu et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2016)
Strain rate dependent microstructural evolution during hot deformation of a hot isostatically processed nickel base superalloy
S. S. Satheesh Kumar et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2016)
An improved kinetics model to describe dynamic recrystallization behavior under inconstant deformation conditions
Ming-Song Chen et al.
JOURNAL OF MATERIALS RESEARCH (2016)
Precipitation behavior during high-temperature isothermal compressive deformation of Inconel 718 alloy
Hongjun Zhang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
Effect of pre-treatment on hot deformation behavior and processing map of an aged nickel-based superalloy
Dao-Guang He et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2015)
An Investigation into Hot Deformation Characteristics and Processing Maps of High-Strength Armor Steel
Ravindranadh Bobbili et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2015)
Plastic deformation behavior and processing maps of a Ni-based superalloy
Peng Zhang et al.
MATERIALS & DESIGN (2015)
Hot compression deformation and constitutive modeling of GH4698 alloy
Peng Zhang et al.
MATERIALS & DESIGN (2015)
Flow characteristics and intrinsic workability of IN718 superalloy
Fei Chen et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2015)
Effects of initial aging time on processing map and microstructures of a nickel-based superalloy
Dong-Xu Wen et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2015)
Study of dynamic recrystallization in a Ni-based superalloy by experiments and cellular automaton model
Yan-Xing Liu et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2015)
Hot deformation and dynamic recrystallization of NiTi intermetallic compound
H. Mirzadeh et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2014)
Constitutive models for high-temperature flow behaviors of a Ni-based superalloy
Y. C. Lin et al.
MATERIALS & DESIGN (2014)
Dynamic recrystallization behavior and constitutive analysis of Incoloy 901 under hot working condition
A. Momeni et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2014)
Hot deformation behavior and processing map of a typical Ni-based superalloy
Dong-Xu Wen et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2014)
A first-principles study on interfacial properties of Ni(001)/Ni3Nb(001)
Zhi-qin Wen et al.
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2014)
A critical review of experimental results and constitutive descriptions for metals and alloys in hot working
Y. C. Lin et al.
MATERIALS & DESIGN (2011)
Hot deformation behavior of delta-processed superalloy 718
Y. Wang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2011)
Finite-element analysis of microstructure evolution in the cogging of an Alloy 718 ingot
Jong Taek Yeom et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2007)
Dissolution kinetics of δ phase and its influence on the notch sensitivity of Inconel 718
Dayong Cai et al.
MATERIALS CHARACTERIZATION (2007)
Quantitative criterion for recrystallization nucleation in single-phase alloys:: Prediction of critical strains and incubation times
H. S. Zurob et al.
ACTA MATERIALIA (2006)
Particle stimulated nucleation of recrystallization at silica particles in nickel
FJ Humphreys
SCRIPTA MATERIALIA (2000)