4.6 Article

Enhancing thixotropy and structural build-up of alkali-activated slag/fly ash pastes with nano clay

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Construction & Building Technology

Effects of redispersible polymer powders on the structural build-up of 3D printing cement paste with and without hydroxypropyl methylcellulose

Yi Zhang et al.

Summary: This study investigates the effects of different types of redispersible polymer powders on the structural build-up of 3D printing cement paste, showing that polymers with different compositions have varying impacts on the performance of cement paste, and hydroxypropyl methylcellulose (HPMC) also plays a role. The shape stability and printing efficiency of cement paste can be quantitatively characterized by limit layer thickness and printing velocity.

CONSTRUCTION AND BUILDING MATERIALS (2021)

Article Construction & Building Technology

Distinctive rheological and temporal viscoelastic behaviour of alkali-activated fly ash/slag pastes: A comparative study with cement paste

Mohammed Fouad Alnahhal et al.

Summary: This study investigates the fundamental differences in viscoelasticity between alkali-activated fly ash/slag materials (AAMs) and cement pastes, showing that the activator viscosity significantly affects the rheological behavior of AAM pastes. The temporal changes in viscoelasticity reveal negligible colloidal interactions between particles in AAM paste until initial setting, resulting in very different viscoelastic behavior compared to well-percolated network in cement paste.

CEMENT AND CONCRETE RESEARCH (2021)

Article Construction & Building Technology

Effectiveness of the rheometric methods to evaluate the build-up of cementitious mortars used for 3D printing

Mohammad Amin Moeini et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

Article Construction & Building Technology

Effects of activator properties and GGBFS/FA ratio on the structural build-up and rheology of AAC

Xiaodi Dai et al.

CEMENT AND CONCRETE RESEARCH (2020)

Article Construction & Building Technology

Influence of water to binder ratio on the rheology and structural Build-up of Alkali-Activated Slag/Fly ash mixtures

Xiaodi Dai et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

Article Construction & Building Technology

Influence of the alkaline solution and temperature on the rheology and reactivity of alkali-activated fly ash pastes

M. Palacios et al.

CEMENT & CONCRETE COMPOSITES (2019)

Article Construction & Building Technology

Fresh and hardened properties of self-compacting concrete using silicon carbide waste as a viscosity-modifying agent

Qiang Ren et al.

CONSTRUCTION AND BUILDING MATERIALS (2019)

Article Engineering, Multidisciplinary

Improving the 3D printability of high volume fly ash mixtures via the use of nano attapulgite clay

Biranchi Panda et al.

COMPOSITES PART B-ENGINEERING (2019)

Article Engineering, Multidisciplinary

Extrusion and rheology characterization of geopolymer nanocomposites used in 3D printing

Biranchi Panda et al.

COMPOSITES PART B-ENGINEERING (2019)

Article Construction & Building Technology

Influence of nano-clay on rheology, fresh properties, heat of hydration and strength of cement-based mortars

Ines Dejaeghere et al.

CONSTRUCTION AND BUILDING MATERIALS (2019)

Article Construction & Building Technology

Rheology of fly ash-based geopolymer: Effect of NaOH concentration

Yasser Rifaai et al.

CONSTRUCTION AND BUILDING MATERIALS (2019)

Article Engineering, Mechanical

Rheological characterization of the viscoelastic solid-like properties of fresh cement pastes with nanoclay addition

Ye Qian et al.

THEORETICAL AND APPLIED FRACTURE MECHANICS (2019)

Article Construction & Building Technology

Distinguishing dynamic and static yield stress of fresh cement mortars through thixotropy

Ye Qian et al.

CEMENT & CONCRETE COMPOSITES (2018)

Article Construction & Building Technology

Effect of fly ash microsphere on the rheology and microstructure of alkali-activated fly ash/slag pastes

Tao Yang et al.

CEMENT AND CONCRETE RESEARCH (2018)

Article Construction & Building Technology

The role of early age structural build-up in digital fabrication with concrete

Lex Reiter et al.

CEMENT AND CONCRETE RESEARCH (2018)

Article Construction & Building Technology

Enhancing thixotropy of fresh cement pastes with nanoclay in presence of polycarboxylate ether superplasticizer (PCE)

Ye Qian et al.

CEMENT AND CONCRETE RESEARCH (2018)

Article Construction & Building Technology

Small amplitude oscillatory shear technique to evaluate structural build-up of cement paste

Qiang Yuan et al.

MATERIALS AND STRUCTURES (2017)

Article Construction & Building Technology

Cementitious materials for construction-scale 3D printing: Laboratory testing of fresh printing mixture

Ali Kazemian et al.

CONSTRUCTION AND BUILDING MATERIALS (2017)

Article Construction & Building Technology

New approach to assess build-up of cement-based suspensions

Ahmed M. Mostafa et al.

CEMENT AND CONCRETE RESEARCH (2016)

Article Construction & Building Technology

Use of creep recovery protocol to measure static yield stress and structural rebuilding of fresh cement pastes

Ye Qian et al.

CEMENT AND CONCRETE RESEARCH (2016)

Article Construction & Building Technology

Reaction kinetics, gel character and strength of ambient temperature cured alkali activated slag-fly ash blends

X. Gao et al.

CONSTRUCTION AND BUILDING MATERIALS (2015)

Article Materials Science, Ceramics

Evidence of a Fractal Percolating Network During Geopolymerization

Julien Rouyer et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2015)

Article Construction & Building Technology

Rheology of alkali-activated slag pastes. Effect of the nature and concentration of the activating solution

F. Puertas et al.

CEMENT & CONCRETE COMPOSITES (2014)

Article Construction & Building Technology

The interrelationship between surface chemistry and rheology in alkali activated slag paste

Alireza Kashani et al.

CONSTRUCTION AND BUILDING MATERIALS (2014)

Article Construction & Building Technology

Modification of cement-based materials with nanoparticles

Shiho Kawashima et al.

CEMENT & CONCRETE COMPOSITES (2013)

Article Construction & Building Technology

Rate of thixotropic rebuilding of cement pastes modified with highly purified attapulgite clays

Shiho Kawashima et al.

CEMENT AND CONCRETE RESEARCH (2013)

Article Construction & Building Technology

External sulfate attack on alkali-activated slag

M. Komljenovic et al.

CONSTRUCTION AND BUILDING MATERIALS (2013)

Article Construction & Building Technology

The origins of thixotropy of fresh cement pastes

N. Roussel et al.

CEMENT AND CONCRETE RESEARCH (2012)

Article Construction & Building Technology

Study of the mechanisms underlying the fresh-state response of cementitious materials modified with nanoclays

Shiho Kawashima et al.

CONSTRUCTION AND BUILDING MATERIALS (2012)

Article Engineering, Chemical

Stabilization of Low-Modulus Sodium Silicate Solutions by Alkali Substitution

John L. Provis et al.

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2012)

Article Construction & Building Technology

Strength and Drying Shrinkage of Alkali-Activated Slag Paste and Mortar

Mao-chieh Chi et al.

ADVANCES IN CIVIL ENGINEERING (2012)

Article Construction & Building Technology

Effect of mineral admixtures on formwork pressure of self-consolidating concrete

Jae Hong Kim et al.

CEMENT & CONCRETE COMPOSITES (2010)

Article Construction & Building Technology

Steady state flow of cement suspensions: A micromechanical state of the art

Nicolas Roussel et al.

CEMENT AND CONCRETE RESEARCH (2010)

Article Construction & Building Technology

Influence of clays on the rheology of cement pastes

Nathan A. Tregger et al.

CEMENT AND CONCRETE RESEARCH (2010)

Article Chemistry, Physical

Role of water in the synthesis of calcined kaolin-based geopolymer

Z. Zuhua et al.

APPLIED CLAY SCIENCE (2009)

Article Materials Science, Ceramics

New Cementitious Materials Based on Alkali-Activated Fly Ash: Performance at High Temperatures

Ana Fernandez-Jimenez et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2008)

Review Materials Science, Multidisciplinary

Geopolymer technology:: the current state of the art

P. Duxson et al.

JOURNAL OF MATERIALS SCIENCE (2007)

Article Construction & Building Technology

Dispersion forces in cement suspensions

RJ Flatt

CEMENT AND CONCRETE RESEARCH (2004)

Article Construction & Building Technology

Towards a prediction of superplasticized concrete rheology

RJ Flatt

MATERIALS AND STRUCTURES (2004)

Article Soil Science

Rheological properties of aqueous suspensions of palygorskite

A Neaman et al.

SOIL SCIENCE SOCIETY OF AMERICA JOURNAL (2000)