相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。Quality of life outcomes one year after replacement of the temporomandibular joint using a modified SF36 questionnaire
B. Gupta et al.
BRITISH JOURNAL OF ORAL & MAXILLOFACIAL SURGERY (2020)
Multi-material additive manufacturing technologies for Ti-, Mg-, and Fe-based biomaterials for bone substitution
N. E. Putra et al.
ACTA BIOMATERIALIA (2020)
Accuracy of custom-fitted temporomandibular joint alloplastic reconstruction and virtual surgical planning
S. Sembronio et al.
INTERNATIONAL JOURNAL OF ORAL AND MAXILLOFACIAL SURGERY (2019)
Customized skull base-temporomandibular joint combined prosthesis with 3D-printing fabrication for craniomaxillofacial reconstruction: a preliminary study
J. S. Zheng et al.
INTERNATIONAL JOURNAL OF ORAL AND MAXILLOFACIAL SURGERY (2019)
An innovative total temporomandibular joint prosthesis with customized design and 3D printing additive fabrication: a prospective clinical study
JiSi Zheng et al.
JOURNAL OF TRANSLATIONAL MEDICINE (2019)
Additive manufacturing of Ti-6Al-4V parts through laser metal deposition (LMD): Process, microstructure, and mechanical properties
Abolfazl Azarniya et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2019)
Review of emerging temporomandibular joint total joint replacement systems
R. Elledge et al.
BRITISH JOURNAL OF ORAL & MAXILLOFACIAL SURGERY (2019)
Customized implants for acetabular Paprosky III defects may be positioned with high accuracy in revision hip arthroplasty
Markus Weber et al.
INTERNATIONAL ORTHOPAEDICS (2019)
Anterior Lumbar Interbody Fusion Using a Personalized Approach: Is Custom the Future of Implants for Anterior Lumbar Interbody Fusion Surgery?
Ralph J. Mobbs et al.
WORLD NEUROSURGERY (2019)
Extended total temporomandibular joint replacements: a classification system
R. Elledge et al.
BRITISH JOURNAL OF ORAL & MAXILLOFACIAL SURGERY (2018)
Design and clinical outcome of a novel 3D-printed prosthetic joint replacement for the human temporomandibular joint
David Ackland et al.
CLINICAL BIOMECHANICS (2018)
Additive manufacturing (3D printing): A review of materials, methods, applications and challenges
Tuan D. Ngo et al.
COMPOSITES PART B-ENGINEERING (2018)
Clinical accuracy of a patient-specific femoral osteotomy guide in minimally-invasive posterior hip arthroplasty
Adrian K. Schneider et al.
HIP INTERNATIONAL (2018)
A new three-dimensional, print-on-demand temporomandibular prosthetic total joint replacement system: Preliminary outcomes
George Dimitroulis et al.
JOURNAL OF CRANIO-MAXILLOFACIAL SURGERY (2018)
Patient-specific pre-contouring of osteosynthesis plates for mandibular reconstruction: Using a three-dimensional key printed solution
J. Kraeima et al.
JOURNAL OF CRANIO-MAXILLOFACIAL SURGERY (2018)
Low-cost, self-made CAD/CAM-guiding system for mandibular reconstruction
Giovanni Dell'Aversana Orabona et al.
SURGICAL ONCOLOGY-OXFORD (2018)
Contribution of 3D printing to mandibular reconstruction after cancer
A. Dupret-Bories et al.
EUROPEAN ANNALS OF OTORHINOLARYNGOLOGY-HEAD AND NECK DISEASES (2018)
Current Trends in Metallic Orthopedic Biomaterials: From Additive Manufacturing to Bio-Functionalization, Infection Prevention, and Beyond
Amir A. Zadpoor
INTERNATIONAL JOURNAL OF MOLECULAR SCIENCES (2018)
Accuracy of Virtual Surgical Planning in Treatment of Temporomandibular Joint Ankylosis Using Distraction Osteogenesis: Comparison of Planned and Actual Results
Kan Chen et al.
JOURNAL OF ORAL AND MAXILLOFACIAL SURGERY (2018)
Frontiers of Additively Manufactured Metallic Materials
Amir A. Zadpoor
MATERIALS (2018)
Accuracy of a CAD/CAM surgical template for mandibular distraction: a preliminary study
B. Li et al.
BRITISH JOURNAL OF ORAL & MAXILLOFACIAL SURGERY (2018)
Additive manufacturing applications in medical cases: A literature based review
Mohd Javaid et al.
ALEXANDRIA JOURNAL OF MEDICINE (2018)
Additive Manufacturing of Biomaterials, Tissues, and Organs
Amir A. Zadpoor et al.
ANNALS OF BIOMEDICAL ENGINEERING (2017)
Design for Additive Bio-Manufacturing: From Patient-Specific Medical Devices to Rationally Designed Meta-Biomaterials
Amir A. Zadpoor
INTERNATIONAL JOURNAL OF MOLECULAR SCIENCES (2017)
Total temporomandibular joint replacement prostheses: a systematic review and bias-adjusted meta-analysis
N. R. Johnson et al.
INTERNATIONAL JOURNAL OF ORAL AND MAXILLOFACIAL SURGERY (2017)
Mandibular reconstruction after cancer: an in-house approach to manufacturing cutting guides
R. Bosc et al.
INTERNATIONAL JOURNAL OF ORAL AND MAXILLOFACIAL SURGERY (2017)
Formation of metastable cellular microstructures in selective laser melted alloys
K. G. Prashanth et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2017)
Two different techniques of manufacturing TMJ replacements - A technical report
Marcin Kozakiewicz et al.
JOURNAL OF CRANIO-MAXILLOFACIAL SURGERY (2017)
Temporomandibular joint reconstruction with stock and custom-made devices: Indications and results of a 14-year experience
Giovanni Gerbino et al.
JOURNAL OF CRANIO-MAXILLOFACIAL SURGERY (2017)
A personalized 3D-printed prosthetic joint replacement for the human temporomandibular joint: From implant design to implantation
David C. Ackland et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2017)
Rapid prototyping assisted fabrication of customized surgical guides in mandibular distraction osteogenesis: a case report
Sandeep W. Dahake et al.
RAPID PROTOTYPING JOURNAL (2017)
Sacral Reconstruction with a 3D-Printed Implant after Hemisacrectomy in a Patient with Sacral Osteosarcoma: 1-Year Follow-Up Result
Doyoung Kim et al.
YONSEI MEDICAL JOURNAL (2017)
Reconstruction of Thoracic Spine Using a Personalized 3D-Printed Vertebral Body in Adolescent with T9 Primary Bone Tumor
Wen Jie Choy et al.
WORLD NEUROSURGERY (2017)
Clinical efficacy and effectiveness of 3D printing: a systematic review
Laura E. Diment et al.
BMJ OPEN (2017)
Clinical Study of 3D Imaging and 3D Printing Technique for Patient-Specific Instrumentation in Total Knee Arthroplasty
Bing Qiu et al.
JOURNAL OF KNEE SURGERY (2017)
3D-printing techniques in a medical setting: a systematic literature review
Philip Tack et al.
BIOMEDICAL ENGINEERING ONLINE (2016)
Medical Device Regulation: A Comparison of the United States and the European Union
Travis G. Maak et al.
JOURNAL OF THE AMERICAN ACADEMY OF ORTHOPAEDIC SURGEONS (2016)
Effect of pore size on bone ingrowth into porous titanium implants fabricated by additive manufacturing: An in vivo experiment
Naoya Taniguchi et al.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2016)
New approach for virtual surgical planning and mandibular reconstruction using a fibula free flap
Matthias Mottini et al.
ORAL ONCOLOGY (2016)
Personalized femoral component design and its direct manufacturing by selective laser melting
Changhui Song et al.
RAPID PROTOTYPING JOURNAL (2016)
Patient-specific instrumentation improves the accuracy of acetabular component placement in total hip arthroplasty
L. Spencer-Gardner et al.
BONE & JOINT JOURNAL (2016)
Patient-specific glenoid guides provide accuracy and reproducibility in total shoulder arthroplasty
M. O. Gauci et al.
BONE & JOINT JOURNAL (2016)
3D Surgical Printing Cutting Guides for Open-Wedge High Tibial Osteotomy: Do It Yourself
Ruben Perez-Mananes et al.
JOURNAL OF KNEE SURGERY (2016)
Accuracy of fibular sectioning and insertion into a rapid-prototyped bone plate, for mandibular reconstruction using CAD-CAM technology
Leonardo Ciocca et al.
JOURNAL OF CRANIO-MAXILLOFACIAL SURGERY (2015)
Twenty-Year Follow-up Study on a Patient-Fitted Temporomandibular Joint Prosthesis: The Techmedica/TMJ Concepts Device
Larry M. Wolford et al.
JOURNAL OF ORAL AND MAXILLOFACIAL SURGERY (2015)
Postoperative accuracy analysis of three-dimensional corrective osteotomy for cubitus varus deformity with a custom-made surgical guide based on computer simulation
Shinsuke Omori et al.
JOURNAL OF SHOULDER AND ELBOW SURGERY (2015)
Bone tissue regeneration: the role of scaffold geometry
Amir A. Zadpoor
BIOMATERIALS SCIENCE (2015)
Technical procedures for template-guided surgery for mandibular reconstruction based on digital design and manufacturing
Yun-feng Liu et al.
BIOMEDICAL ENGINEERING ONLINE (2014)
Rapid prototyped patient specific implants for reconstruction of orbital wall defects
Patricia Stoor et al.
JOURNAL OF CRANIO-MAXILLOFACIAL SURGERY (2014)
Cranial reconstruction: 3D biomodel and custom-built implant created using additive manufacturing
Andre Luiz Jardini et al.
JOURNAL OF CRANIO-MAXILLOFACIAL SURGERY (2014)
Metal Additive Manufacturing: A Review
William E. Frazier
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2014)
A Novel Classification and Online Platform for Planning and Documentation of Medical Applications of Additive Manufacturing
Jukka Tuomi et al.
SURGICAL INNOVATION (2014)
Evaluation of computer-assisted mandibular reconstruction with vascularized iliac crest bone graft compared to conventional surgery: a randomized prospective clinical trial
Nassim Ayoub et al.
TRIALS (2014)
Error analysis of a CAD/CAM method for unidirectional mandibular distraction osteogenesis in the treatment of hemifacial microsomia
Hao Sun et al.
BRITISH JOURNAL OF ORAL & MAXILLOFACIAL SURGERY (2013)
Additive manufacturing and its societal impact: a literature review
Samuel H. Huang et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2013)
Image-Guided Distal Radius Osteotomy Using Patient-Specific Instrument Guides
Manuela Kunz et al.
JOURNAL OF HAND SURGERY-AMERICAN VOLUME (2013)
Three-Dimensional Plotting and Printing of an Implant Drilling Guide: Simplifying Guided Implant Surgery
Tabea Viktoria Fluegge et al.
JOURNAL OF ORAL AND MAXILLOFACIAL SURGERY (2013)
Alloplastic temporomandibular joint replacement: rationale for the use of custom devices
L. G. Mercuri
INTERNATIONAL JOURNAL OF ORAL AND MAXILLOFACIAL SURGERY (2012)
Computer-Aided Design and Manufacturing in Craniomaxillofacial Surgery: The New State of the Art
Jamie P. Levine et al.
JOURNAL OF CRANIOFACIAL SURGERY (2012)
Mandibular Kinematics in Patients With Alloplastic Total Temporomandibular Joint Replacement-A Prospective Study
Sabine S. Linsen et al.
JOURNAL OF ORAL AND MAXILLOFACIAL SURGERY (2012)
A CAD/CAM-prototyped anatomical condylar prosthesis connected to a custom-made bone plate to support a fibula free flap
L. Ciocca et al.
MEDICAL & BIOLOGICAL ENGINEERING & COMPUTING (2012)
Quantification of the accuracy of MRI generated 3D models of long bones compared to CT generated 3D models
Kanchana Rathnayaka et al.
MEDICAL ENGINEERING & PHYSICS (2012)
Computer-guided rapid-prototyped templates for segmental mandibular osteotomies: a preliminary report
Adel Abou-ElFetouh et al.
INTERNATIONAL JOURNAL OF MEDICAL ROBOTICS AND COMPUTER ASSISTED SURGERY (2011)
A Novel Patient-Specific Navigational Template for Cervical Pedicle Screw Placement
Sheng Lu et al.
SPINE (2009)
Image fusion for computer-assisted bone tumor surgery
Kwok Chuen Wong et al.
CLINICAL ORTHOPAEDICS AND RELATED RESEARCH (2008)
Accuracy of MRI vs CT imaging with particular reference to patient specific templates for total knee replacement surgery
D. White et al.
INTERNATIONAL JOURNAL OF MEDICAL ROBOTICS AND COMPUTER ASSISTED SURGERY (2008)
Binding mechanisms in selective laser sintering and selective laser melting
JP Kruth et al.
RAPID PROTOTYPING JOURNAL (2005)
Direct metal laser sintering for rapid tooling: processing and characterisation of EOS parts
MW Khaing et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2001)