相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。Aqueous Ni-rich-cathode dispersions processed with phosphoric acid for lithium-ion batteries with ultra-thick electrodes
Alexander Kukay et al.
JOURNAL OF COLLOID AND INTERFACE SCIENCE (2021)
Performance and ageing behavior of water-processed LiNi0.5Mn0.3Co0.2O2/Graphite lithium-ion cells
Marie Bichon et al.
JOURNAL OF POWER SOURCES (2021)
Polymer Binders: Characterization and Development toward Aqueous Electrode Fabrication for Sustainability
Aleksander Cholewinski et al.
POLYMERS (2021)
Sodium Alginate Binders for Bivalency Aqueous Batteries
Yangyang Ding et al.
ACS APPLIED MATERIALS & INTERFACES (2021)
3D-Printed Testing Plate for the Optimization of High C-Rates Cycling Performance of Lithium-Ion Cells
Gilberto Carbonari et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2021)
Enabling aqueous processing for LiNi0.80Co0.15Al0.05O2 (NCA)-based lithium-ion battery cathodes using polyacrylic acid
W. Blake Hawley et al.
ELECTROCHIMICA ACTA (2021)
Enabling Aqueous Processing for LiNi0.5Mn1.5O4-Based Positive Electrodes in Lithium-Ion Batteries by Applying Lithium-Based Processing Additives
Iris Dienwiebel et al.
ADVANCED ENERGY AND SUSTAINABILITY RESEARCH (2021)
Towards Understanding of Cracking during Drying of Thick Aqueous-Processed LiNi0.8Mn0.1Co0.1O2 Cathodes
Ritu Sahore et al.
ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2020)
Water-processable, sprayable LiFePO4/graphene hybrid cathodes for high-power lithium ion batteries
Ju-Won Jeon et al.
JOURNAL OF INDUSTRIAL AND ENGINEERING CHEMISTRY (2020)
Impact of Newly Developed Styrene-Butadiene-Rubber Binder on the Electrode Performance of High-Voltage LiNi0.5Mn1.5O4 Electrode
Hayata Isozumi et al.
ACS APPLIED ENERGY MATERIALS (2020)
Water-Based Electrode Manufacturing and Direct Recycling of Lithium-Ion Battery Electrodes-A Green and Sustainable Manufacturing System
Jianlin Li et al.
ISCIENCE (2020)
Lithium and transition metal dissolution due to aqueous processing in lithium-ion battery cathode active materials
W. Blake Hawley et al.
JOURNAL OF POWER SOURCES (2020)
Application of modified styrene-butadiene-rubber-based latex binder to high-voltage operating LiCoO2 composite electrodes for lithium-ion batteries
Hayata Isozumi et al.
JOURNAL OF POWER SOURCES (2020)
High reactivity of the nickel-rich LiNi1-x-yMnxCoyO2 layered materials surface towards H2O/CO2 atmosphere and LiPF6-based electrolyte
Ana Cristina Martinez et al.
JOURNAL OF POWER SOURCES (2020)
Consequences of long-term water exposure for bulk crystal structure and surface composition/chemistry of nickel-rich layered oxide materials for Li-ion batteries
Henrik L. Andersen et al.
JOURNAL OF POWER SOURCES (2020)
Effects of surface modification and organic binder type on cell performance of water-processed Ni-rich Li(Ni0.8Co0.1Mn0.1)O2 cathodes
Sireesha Pedaballi et al.
JOURNAL OF POWER SOURCES (2020)
Study of the Reactions between Ni-Rich Positive Electrode Materials and Aqueous Solutions and their Relation to the Failure of Li-Ion Cells
Ines Hamam et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2020)
The role of the pH value in water-based pastes on the processing and performance of Ni-rich LiNi0.5Mn0.3Co0.2O2 based positive electrodes
Lukas Ibing et al.
JOURNAL OF POWER SOURCES (2020)
Water-Based Process to the Preparation of Nickel-Rich Li(Ni0.8Co0.1Mn0.1)O2 Cathode
Jia-He Kuo et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2020)
Chemical stability and long-term cell performance of low-cobalt, Ni-Rich cathodes prepared by aqueous processing for high-energy Li-Ion batteries
Marissa Wood et al.
ENERGY STORAGE MATERIALS (2020)
Deriving Structure-Performance Relations of Chemically Modified Chitosan Binders for Sustainable High-Voltage LiNi0.5Mn1.5O4 Cathodes
Matthias Kuenzel et al.
BATTERIES & SUPERCAPS (2020)
Degradation and Aging Routes of Ni-Rich Cathode Based Li-Ion Batteries
Philipp Teichert et al.
BATTERIES-BASEL (2020)
Unveiling and Amplifying the Benefits of Carbon-Coated Aluminum Current Collectors for Sustainable LiNi0.5Mn1.5O4 Cathodes
Matthias Kuenzel et al.
ACS APPLIED ENERGY MATERIALS (2020)
Study of Immersion of LiNi0.5Mn0.3Co0.2O2 Material in Water for Aqueous Processing of Positive Electrode for Li-Ion Batteries
Marie Bichon et al.
ACS APPLIED MATERIALS & INTERFACES (2019)
Effects of pH control by acid addition at the aqueous processing of cathodes for lithium ion batteries
Werner Bauer et al.
ELECTROCHIMICA ACTA (2019)
Towards water based ultra-thick Li ion battery electrodes - A binder approach
Lukas Ibing et al.
JOURNAL OF POWER SOURCES (2019)
Optimization of synthesis condition of water-resistant and thin titanium oxide layer-coated Ni-rich layered cathode materials and their cathode performance
Yubin Liu et al.
JOURNAL OF APPLIED ELECTROCHEMISTRY (2019)
A method of increasing the energy density of layered Ni-rich Li[Ni1-2xCoxMnx]O2 cathodes (x=0.05, 0.1, 0.2)
Jae-Hyung Kim et al.
JOURNAL OF MATERIALS CHEMISTRY A (2019)
Washing of Nickel-Rich Cathode Materials for Lithium-Ion Batteries: Towards a Mechanistic Understanding
Daniel Pritzl et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2019)
Complementary Strategies Toward the Aqueous Processing of High-Voltage LiNi0.5Mn1.5O4 Lithium-Ion Cathodes
Matthias Kuenzel et al.
CHEMSUSCHEM (2018)
Water-based LiNi1/3Mn1/3Co1/3O2-cathodes with good electrochemical performance by use of additives
Michaela Memm et al.
ELECTROCHIMICA ACTA (2018)
Effect of Ambient Storage on the Degradation of Ni-Rich Positive Electrode Materials (NMC811) for Li-Ion Batteries
Roland Jung et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2018)
Technical and economic analysis of solvent-based lithium-ion electrode drying with water and NMP
David L. Wood et al.
DRYING TECHNOLOGY (2018)
Alternative binders for sustainable electrochemical energy storage - the transition to aqueous electrode processing and bio-derived polymers
Dominic Bresser et al.
ENERGY & ENVIRONMENTAL SCIENCE (2018)
Toward Low-Cost, High-Energy Density, and High-Power Density Lithium-Ion Batteries
Jianlin Li et al.
JOM (2017)
Toward greener lithium-ion batteries: Aqueous binder-based LiNi0.4Co0.2Mn0.4O2 cathode material with superior electrochemical performance
Zhen Chen et al.
JOURNAL OF POWER SOURCES (2017)
Enabling aqueous processing for crack-free thick electrodes
Zhijia Du et al.
JOURNAL OF POWER SOURCES (2017)
New eco-friendly low-cost binders for Li-ion anodes
D. Versaci et al.
JOURNAL OF SOLID STATE ELECTROCHEMISTRY (2017)
Chemical Weathering of Layered Ni-Rich Oxide Electrode Materials: Evidence for Cation Exchange
Ilya A. Shkrob et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2017)
Understanding Polyacrylic Acid and Lithium Polyacrylate Binder Behavior in Silicon Based Electrodes for Li-Ion Batteries
W. Porcher et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2017)
Leaching process for recovering valuable metals from the LiNi1/3Co1/3Mn1/3O2 cathode of lithium-ion batteries
Li-Po He et al.
WASTE MANAGEMENT (2017)
Synthesis of water-resistant thin TiOx layer-coated high-voltage and high-capacity LiNiaCobAl1-a-bO2 (a > 0.85) cathode and its cathode performance to apply a water-based hybrid polymer binder to Li-Ion batteries
Toyokazu Tanabe et al.
ELECTROCHIMICA ACTA (2017)
A comparative study of aqueous and organic processed Li1.2Ni0.2Mn0.6O2 Li-rich cathode materials for advanced lithium-ion batteries
A. Iturrondobeitia et al.
ELECTROCHIMICA ACTA (2017)
In Situ Coating of Li[Ni0.33Mn0.33Co0.33]O2 Particles to Enable Aqueous Electrode Processing
Nicholas Loeffler et al.
CHEMSUSCHEM (2016)
Energy impact of cathode drying and solvent recovery during lithium-ion battery manufacturing
Shabbir Ahmed et al.
JOURNAL OF POWER SOURCES (2016)
Effect of aqueous-based cathode slurry pH and immersion time on corrosion of aluminum current collector in lithium-ion batteries
S. Y. Li et al.
MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION (2016)
Study of Water-Based Lithium Titanate Electrode Processing: The Role of pH and Binder Molecular Structure
Diogo Vieira Carvalho et al.
POLYMERS (2016)
Development of Large Format NMC-Graphite Lithium Ion Pouch Cell with Aqueous Processed Electrodes
A. Kvasha et al.
18TH INTERNATIONAL MEETING ON LITHIUM BATTERIES (IMLB 2016) (2016)
Polyurethane Binder for Aqueous Processing of Li-Ion Battery Electrodes
Nicholas Loeffler et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2015)
Electrochemical Properties of LiCoO2 Electrodes with Latex Binders on High-Voltage Exposure
Naoaki Yabuuchi et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2015)
Processing of water-based LiNi1/3Mn1/3Co1/3O2 pastes for manufacturing lithium ion battery cathodes
Fatih A. Cetinel et al.
BULLETIN OF MATERIALS SCIENCE (2014)
Corrosion of aluminum electrodes in aqueous slurries for lithium-ion batteries
Benjamin C. Church et al.
JOURNAL OF MATERIALS SCIENCE (2014)
Enabling aqueous binders for lithium battery cathodes - Carbon coating of aluminum current collector
Italo Doberdo et al.
JOURNAL OF POWER SOURCES (2014)
A comparative study of different binders and their effects on electrochemical properties of LiMn2O4 cathode in lithium ion batteries
Zhian Zhang et al.
JOURNAL OF POWER SOURCES (2014)
Enhanced storage property of LiNi0.8Co0.15Al0.05O2 coated with LiCoO2
Wanmin Liu et al.
JOURNAL OF POWER SOURCES (2013)
Comparison of the structural and electrochemical properties of layered Li[NixCoyMnz]O2 (x=1/3, 0.5, 0.6, 0.7, 0.8 and 0.85) cathode material for lithium-ion batteries
Hyung-Joo Noh et al.
JOURNAL OF POWER SOURCES (2013)
Latex Migration in Battery Slurries during Drying
Sanghyuk Lim et al.
LANGMUIR (2013)
Cycle performance improvement of LiFePO4 cathode with polyacrylic acid as binder
Zhian Zhang et al.
ELECTROCHIMICA ACTA (2012)
Superior Performance of LiFePO4 Aqueous Dispersions via Corona Treatment and Surface Energy Optimization
Jianlin Li et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2012)
Enhanced High-Temperature Performances of LiFePO4 Cathode with Polyacrylic Acid as Binder
Zhian Zhang et al.
ECS ELECTROCHEMISTRY LETTERS (2012)
Investigations on cellulose-based high voltage composite cathodes for lithium ion batteries
J. Li et al.
JOURNAL OF POWER SOURCES (2011)
Aging of LiNi1/3Mn1/3Co1/3O2 cathode material upon exposure to H2O
Xiaoyu Zhang et al.
JOURNAL OF POWER SOURCES (2011)
Corrosion of continuous alumina-fibre reinforced Al-2 wt.% Cu-T6 metal-matrix composite in 3.15 wt.% NaCl solution
J. Zhu et al.
CORROSION SCIENCE (2010)
Design of Aqueous Processed Thick LiFePO4 Composite Electrodes for High-Energy Lithium Battery
W. Porcher et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2009)
Is LiFePO4 stable in water? Toward greener li-ion batteries
W. Porcher et al.
ELECTROCHEMICAL AND SOLID STATE LETTERS (2008)
A novel and efficient water-based composite binder for LiCoO2 cathodes in lithium-ion batteries
Jyh-Tsung Lee et al.
JOURNAL OF POWER SOURCES (2007)
Effects of pH on the dispersion and cell performance of LiCoO2 cathodes based on the aqueous process
Chia-Chen Li et al.
JOURNAL OF MATERIALS SCIENCE (2007)
Study of styrene butadiene rubber and sodium methyl cellulose as binder for negative electrodes in lithium-ion batteries
H. Buqa et al.
JOURNAL OF POWER SOURCES (2006)