相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。Fabrication of high-performance gas-diffusion-electrode based membrane-electrode assemblies
Scott A. Mauger et al.
JOURNAL OF POWER SOURCES (2020)
Use of a segmented cell for the combinatorial development of platinum group metal-free electrodes for polymer electrolyte fuel cells
Luigi Osmieri et al.
JOURNAL OF POWER SOURCES (2020)
Atomistic MD Study of Nafion Dispersions: Role of Solvent and Counterion in the Aggregate Structure, Ionic Clustering, and Acid Dissociation
Atefeh Tarokh et al.
MACROMOLECULES (2020)
Enabling industrial production of electrodes by use of slot-die coating for HT-PEM fuel cells
Merit Bodner et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2019)
Elucidating the Dynamic Nature of Fuel Cell Electrodes as a Function of Conditioning: An ex Situ Material Characterization and in Situ Electrochemical Diagnostic Study
Sadia Kabir et al.
ACS APPLIED MATERIALS & INTERFACES (2019)
Dictating Pt-Based Electrocatalyst Performance in Polymer Electrolyte Fuel Cells, from Formulation to Application
Tim Van Cleve et al.
ACS APPLIED MATERIALS & INTERFACES (2019)
Evolution of Ionomer Morphology from Dispersion to Film: An in Situ X-ray Study
Peter J. Dudenas et al.
MACROMOLECULES (2019)
Impact of Microporous Layer Roughness on Gas-Diffusion-Electrode-Based Polymer Electrolyte Membrane Fuel Cell Performance
Min Wang et al.
ACS APPLIED ENERGY MATERIALS (2019)
Effects of the evaporation rate on the segregation in drying bimodal colloidal suspensions
Rei Tatsumi et al.
APPLIED PHYSICS LETTERS (2018)
Influence of the drying conditions on the particle distribution in particle filled polymer films: Experimental validation of predictive drying regime maps
Susanna Baesch et al.
CHEMICAL ENGINEERING AND PROCESSING-PROCESS INTENSIFICATION (2018)
Homogeneity analysis of square meter-sized electrodes for PEM electrolysis and PEM fuel cells
Andrea Burdzik et al.
JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH (2018)
Agglomerates in Polymer Electrolyte Fuel Cell Electrodes: Part I. Structural Characterization
Firat C. Cetinbas et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2018)
Agglomerates in Polymer Electrolyte Fuel Cell Electrodes: Part II. Transport Characterization
Firat C. Cetinbas et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2018)
Rheological Investigation on the Microstructure of Fuel Cell Catalyst Inks
Sunilkumar Khandavalli et al.
ACS APPLIED MATERIALS & INTERFACES (2018)
Role of Surface Chemistry on Catalyst/Ionomer Interactions for Transition Metal-Nitrogen-Carbon Electrocatalysts
Kateryna Artyshkova et al.
ACS APPLIED ENERGY MATERIALS (2018)
Hybrid approach combining multiple characterization techniques and simulations for microstructural analysis of proton exchange membrane fuel cell electrodes
Firat C. Cetinbas et al.
JOURNAL OF POWER SOURCES (2017)
Microstructural Analysis and Transport Resistances of Low-Platinum-Loaded PEFC Electrodes
Firat C. Cetinbas et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2017)
Clustering and Percolation in Suspensions of Carbon Black
Jeffrey J. Richards et al.
LANGMUIR (2017)
Stratification in binary colloidal polymer films: experiment and simulations
D. K. Makepeace et al.
SOFT MATTER (2017)
Resolving Electrode Morphology's Impact on Platinum Group Metal-Free Cathode Performance Using Nano-CT of 3D Hierarchical Pore and Ionomer Distribution
Siddharth Komini Babu et al.
ACS APPLIED MATERIALS & INTERFACES (2016)
A Review of the Operating Limits in Slot Die Coating Processes
Xiaoyu Ding et al.
AICHE JOURNAL (2016)
Investigation of film solidification and binder migration during drying of Li-Ion battery anodes
Stefan Jaiser et al.
JOURNAL OF POWER SOURCES (2016)
Integration of TomoPy and the ASTRA toolbox for advanced processing and reconstruction of tomographic synchrotron data
Daniel M. Pelt et al.
JOURNAL OF SYNCHROTRON RADIATION (2016)
Fabrication of catalyst coated membrane with screen printing method in a proton exchange membrane fuel cell
Wentao Wang et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2015)
A Physics-Based Impedance Model of Proton Exchange Membrane Fuel Cells Exhibiting Low-Frequency Inductive Loops
Brian P. Setzler et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2015)
Increased photoelectron transmission in High-pressure photoelectron spectrometers using swift acceleration
Marten O. M. Edwards et al.
NUCLEAR INSTRUMENTS & METHODS IN PHYSICS RESEARCH SECTION A-ACCELERATORS SPECTROMETERS DETECTORS AND ASSOCIATED EQUIPMENT (2015)
Fuel Cell Catalyst Layers: A Polymer Science Perspective
Steven Holdcroft
CHEMISTRY OF MATERIALS (2014)
Performance improvement by a glue-functioned Nafion layer coating on gas diffusion electrodes in PEM fuel cells
Chia-Chi Sung et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2014)
Slot-Die Coating: A New Preparation Method for Direct Methanol Fuel Cells Catalyst Layers
Andreas Gluesen et al.
JOURNAL OF FUEL CELL SCIENCE AND TECHNOLOGY (2013)
Influence of the composition of isopropyl alcohol/water mixture solvents in catalyst ink solutions on proton exchange membrane fuel cell performance
Trung Truc Ngo et al.
JOURNAL OF POWER SOURCES (2013)
Deterministic contact mechanics model applied to electrode interfaces in polymer electrolyte fuel cells and interfacial water accumulation
I. V. Zenyuk et al.
JOURNAL OF POWER SOURCES (2013)
Latex Migration in Battery Slurries during Drying
Sanghyuk Lim et al.
LANGMUIR (2013)
Electrocatalyst approaches and challenges for automotive fuel cells
Mark K. Debe
NATURE (2012)
Fiji: an open-source platform for biological-image analysis
Johannes Schindelin et al.
NATURE METHODS (2012)
Nafion in Dilute Solvent Systems: Dispersion or Solution?
Cynthia Welch et al.
ACS MACRO LETTERS (2012)
The Property and Performance Differences Between Catalyst Coated Membrane and Catalyst Coated Diffusion Media
Derek W. Fultz et al.
JOURNAL OF FUEL CELL SCIENCE AND TECHNOLOGY (2011)
Effects of Catalyst Carbon Support on Proton Conduction and Cathode Performance in PEM Fuel Cells
Yuxiu Liu et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2011)
Role of Micro-Porous Layer for Water Transfer Phenomena in PEFC
K. Kadowaki et al.
POLYMER ELECTROLYTE FUEL CELLS 11 (2011)
Drying Regime Maps for Particulate Coatings
Christine M. Cardinal et al.
AICHE JOURNAL (2010)
Fabrication of catalyst-coated membrane-electrode assemblies by doctor blade method and their performance in fuel cells
In-Su Park et al.
JOURNAL OF POWER SOURCES (2010)
Investigation of a Catalyst Ink Dispersion Using Both Ultra-Small-Angle X-ray Scattering and Cryogenic TEM
Fan Xu et al.
LANGMUIR (2010)
Influence of hot-pressing temperature on the performance of PEMFC and catalytic activity
Jing-Chie Lin et al.
JOURNAL OF APPLIED ELECTROCHEMISTRY (2009)
Investigation of the Impact of Interfacial Delamination on Polymer Electrolyte Fuel Cell Performance
Soowhan Kim et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2009)
Ceramic nanoparticle/monodisperse latex coatings
Hui Luo et al.
LANGMUIR (2008)
Cathode catalyst utilization for the ORR in a PEMFC - Analytical model and experimental validation
K. C. Neyerlin et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2007)
Influence of the solvent in anode catalyst ink on the performance of a direct methanol fuel cell
JH Kim et al.
JOURNAL OF POWER SOURCES (2004)
Investigation of oxygen gain in polymer electrolyte membrane fuel cells
A Prasanna et al.
JOURNAL OF POWER SOURCES (2004)
Electrochemical characterization of the active surface in carbon-supported platinum electrocatalysts for PEM fuel cells
DA Stevens et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2003)
An innovative process for PEMFC electrodes using the expansion of Nafion film
CH Hsu et al.
JOURNAL OF POWER SOURCES (2003)
分享论文
