☆ 4.7 Article

Convection of water based nanofluid flow including non-Darcy law

JOURNAL OF MOLECULAR LIQUIDS (2021)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Green & Sustainable Science & Technology

Coupling system dynamics analysis and risk aversion programming for optimizing the mixed noise-driven shale gas-water supply chains

Yizhong Chen et al.

Summary: This study develops a comprehensive modeling framework for mixed noise-driven shale gas-water supply chains using system dynamics model and stochastic risk-aversion programming. The results show that high flowback and recycle rates can increase shale wells' carrying capacity, and an increase in weighting factor would increase system cost but reduce conditional value-at risk value.

JOURNAL OF CLEANER PRODUCTION (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Superhydrophobic Flexible Supercapacitors Formed by Integrating Hydrogel with Functional Carbon Nanomaterials

Peng Wang et al.

Summary: This research focuses on incorporating superhydrophobicity into flexible supercapacitors, utilizing a polyvinyl alcohol/HNO3 hydrogel as the electrolyte for self-healing capability, and utilizing microscale graphene and nanoscale carbon nanotubes for electrode materials to construct superhydrophobic electrodes. The combination of superhydrophobicity and flexible energy storage could have broad applications for outdoor and underwater wearable electronics.

CHINESE JOURNAL OF CHEMISTRY (2021)

添加到收藏夹

Article Green & Sustainable Science & Technology

Evaluation of photovoltaic panels using different nano phase change material and a concise comparison: An experimental study

Furcian Jamil et al.

Summary: The research focused on improving the performance of PV panels by enhancing the temperature control through nano-PCMs. Experimental results showed that graphene nanoplatelets-based nano-PCM had the best performance in terms of temperature reduction and electrical efficiency under outdoor conditions.

RENEWABLE ENERGY (2021)

添加到收藏夹

Article Automation & Control Systems

Adaptive Neural Network-Based Finite-Time Online Optimal Tracking Control of the Nonlinear System With Dead Zone

Liang Ding et al.

Summary: An adaptive neural network-based finite-time online optimal tracking control algorithm is proposed for the uncertain nonstrict nonlinear system with dead-zone input. By defining a new state vector and an HJB function, the algorithm successfully guarantees semiglobal practical finite-time stability.

IEEE TRANSACTIONS ON CYBERNETICS (2021)

添加到收藏夹

Review Engineering, Mechanical

Milling Force Model for Aviation Aluminum Alloy: Academic Insight and Perspective Analysis

Zhenjing Duan et al.

Summary: Cutting force plays a crucial role in material removal and workpiece surface integrity during aircraft aluminum alloy milling, and establishing a prediction model is essential for determining machining accuracy. Future research should focus on high-speed milling, instantaneous cutting force modeling, establishing a database, and the impact of chatter on the prediction accuracy of cutting force.

CHINESE JOURNAL OF MECHANICAL ENGINEERING (2021)

添加到收藏夹

Article Mechanics

Corrosion fatigue lifetime assessment of high-speed railway axle EA4T steel with artificial scratch

Yanan Hu et al.

Summary: The study found that railway EA4T alloy steel is very sensitive to chloride-containing environments, with cracking occurring in rotating bending tests, and scratched specimens having shorter lifetimes. The research also showed that the corrosive environment facilitates crack initiation without the need for corrosion pits.

ENGINEERING FRACTURE MECHANICS (2021)

添加到收藏夹

Article Chemistry, Physical

Heat recovery application of nanomaterial with existence of turbulator

Junhua Li et al.

Summary: This study analyzed turbulent flow with the installation of helical tape in a system utilizing nanofluid, presenting hydrothermal and exergy analysis. Using the Finite Volume Method, the study explored the effects of Re and number of revolutions on hydrothermal treatment and extracted suitable correlations for entropy components. Results showed that pressure loss increases with the rise of Re and revolution number.

JOURNAL OF MOLECULAR LIQUIDS (2021)

添加到收藏夹

Article Engineering, Chemical

Melting process of nanoparticle enhanced PCM through storage cylinder incorporating fins

Fanghua Li et al.

Summary: This paper discusses how the arrangement of fins can affect the charging process, utilizing a mixture of paraffin and copper oxide nanomaterial and exploring various configurations of fins with different positions, thicknesses, and lengths. Results show that using fins can reduce melting time, with fins on both inner and outer pipes improving efficiency, and finding the optimal fin style can achieve the best performance.

POWDER TECHNOLOGY (2021)

添加到收藏夹

Article Food Science & Technology

Walnut Fruit Processing Equipment: Academic Insights and Perspectives

Mingzheng Liu et al.

Summary: This paper discusses the deep processing of walnuts, focusing on the utilization of by-products and the impact of preliminary processing on the quality of final walnut products. By analyzing the steps and equipment requirements of walnut preliminary processing, suggestions are made to address existing bottlenecks and ensure high-quality walnut products.

FOOD ENGINEERING REVIEWS (2021)

添加到收藏夹

Article Green & Sustainable Science & Technology

Effects of Physicochemical Properties of Different Base Oils on Friction Coefficient and Surface Roughness in MQL Milling AISI 1045

Qingan Yin et al.

Summary: Research found that palm oil showed the best lubrication effect among different vegetable oils, achieving the lowest milling force, friction coefficient, and surface roughness values, resulting in the smoothest workpiece surface. Analysis revealed that palm oil, with a high content of saturated fatty acids, high viscosity, and small contact angle, could form the strongest lubricating oil film at the tool-workpiece interface.

INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING-GREEN TECHNOLOGY (2021)

添加到收藏夹

Article Thermodynamics

Temperature of Grinding Carbide With Castor Oil-Based MoS2 Nanofluid Minimum Quantity Lubrication

Menghua Sui et al.

Summary: Nanofluid minimum quantity lubrication (NMQL) demonstrates better stability and lower grinding zone temperatures compared to traditional flood lubrication when grinding cemented carbide. It achieves the highest G ratio, lowest specific grinding force, and is proven to be suitable for grinding cemented carbide.

JOURNAL OF THERMAL SCIENCE AND ENGINEERING APPLICATIONS (2021)

添加到收藏夹

Article Thermodynamics

Analyzing entropy and thermal behavior of nanomaterial through solar collector involving new tapes

M. Sheikholeslami et al.

Summary: The research demonstrates that using aluminum oxide nanomaterial as a turbulator can enhance the flow of nanofluids, improving heat transfer efficiency. The values of Be and Phi s vary with different Re and TTn, showing that turbulators can reduce exergy losses.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2021)

添加到收藏夹

Review Green & Sustainable Science & Technology

Recent progress on flat plate solar collectors and photovoltaic systems in the presence of nanofluid: A review

M. Sheikholeslami et al.

Summary: The current review provides empirical and numerical analyses of the thermal performance development in flat plate solar collectors (FPSCs), showing that utilizing nanofluids in PVT and thermal systems can increase both electrical and thermal energy outputs. Studies demonstrate a higher overall performance in FPSCs with the use of nanofluids, highlighting the potential benefits of incorporating nanofluids in solar energy systems.

JOURNAL OF CLEANER PRODUCTION (2021)

添加到收藏夹

Article Chemistry, Physical

Nanomaterial transportation and exergy loss modeling incorporating CVFEM

Pei-Ying Xiong et al.

Summary: Numerical simulation of hybrid nanomaterial free convection was conducted with the assistance of CVFEM, showing that dispersing nanomaterial can minimize exergy loss and hybrid nanofluid was employed. Increasing Hartmann number leads to greater X-d and is more sensitive when convection becomes stronger. The increase in permeability enhances nanomaterial motion and reduces exergy drop.

JOURNAL OF MOLECULAR LIQUIDS (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Photocatalyst-controlled and visible light-enabled selective oxidation of pyridinium salts

Xiang-Jun Peng et al.

Summary: This study presents two methods for the selective oxidation of pyridiniums, one utilizing photocatalysis and the other visible light induction. The transformations involve oxygen-mediated cycloaddition, PCET, pyridine ring opening, and recyclization to convert pyridiniums to pyrroles, and free radical rearrangement/aerobic oxidation catalyzed by cobalt (II) for the selective formation of 4-carbonyl pyridines.

SCIENCE CHINA-CHEMISTRY (2021)

添加到收藏夹

Article Construction & Building Technology

Thermal Effect of Welding on Mechanical Behavior of High-Strength Steel

Jin Jiang et al.

Summary: This study experimentally investigates the thermal effect of welding on the mechanical behavior of HSS Q690CFD steel, showing that different parameters have an impact on welding residual stress, microstructure, and hardness. Heat treatment has a better stress-relief effect on specimens without mismatch, and the width of the HAZ increases steadily with the increase in heat input.

JOURNAL OF MATERIALS IN CIVIL ENGINEERING (2021)

添加到收藏夹

Article Chemistry, Physical

Nanoparticles for phase change process of water utilizing FEM

Pei-Ying Xiong et al.

Summary: This article focuses on studying the effects of adding fins and nanoparticles of different sizes on the time needed for solidification. The diameter of particles has a significant impact on the solidification rate, and it is not recommended to increase the diameter above 40 nm.

JOURNAL OF MOLECULAR LIQUIDS (2021)

添加到收藏夹

Article Green & Sustainable Science & Technology

Investigation of solar collector system with turbulator considering hybrid nanoparticles

M. Sheikholeslami et al.

Summary: This study investigated six-lobed absorber tubes with combined turbulators and the addition of hybrid nanoparticles to enhance productivity of solar systems. Results showed that using six-lobed tubes with turbulators instead of circular tubes can improve cooling performance and reduce exergy loss.

RENEWABLE ENERGY (2021)

添加到收藏夹

Article Engineering, Multidisciplinary

A Passive Anti-icing Strategy Based on a Superhydrophobic Mesh with Extremely Low Ice Adhesion Strength

Peng Wang et al.

Summary: This research investigates the effect of area fraction on ice adhesion strength by partially embedding silica nanoparticles into microscale fabrics and altering mesh size. It is found that ice adhesion strength decreases as area fraction decreases. The combination of superhydrophobicity and stress concentration are attributed to the low ice adhesion strength observed in the experiments.

JOURNAL OF BIONIC ENGINEERING (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Non-contact manipulation of nonmagnetic materials by using a uniform magnetic field: Experiment and simulation

Xiang Li et al.

JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS (2020)

添加到收藏夹

Article Chemistry, Multidisciplinary

Enhancing Performance of a GaAs/AlGaAs/GaAs Nanowire Photodetector Based on the Two-Dimensional Electron-Hole Tube Structure

Xiaotian Zhu et al.

NANO LETTERS (2020)

添加到收藏夹

Article Nanoscience & Nanotechnology

Flexible Carbon-Fiber/Semimetal Bi Nanosheet Arrays as Separable and Recyclable Plasmonic Photocatalysts and Photoelectrocatalysts

Yanling Yang et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

添加到收藏夹

Article Chemistry, Multidisciplinary

Numerical Study on Hysteretic Behaviour of Horizontal-Connection and Energy-Dissipation Structures Developed for Prefabricated Shear Walls

Limeng Zhu et al.

APPLIED SCIENCES-BASEL (2020)

添加到收藏夹

Article Thermodynamics

Experimental study on transient heat/mass transfer characteristics during static flash of aqueous NaCl solution

Dan Zhang et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2020)

添加到收藏夹

Article Environmental Sciences

Changing Port Governance Model: Port Spatial Structure and Trade Efficiency

Lulu Cao

JOURNAL OF COASTAL RESEARCH (2020)

添加到收藏夹

Article Construction & Building Technology

Influence of seismic incident angle on response uncertainty and structural performance of tall asymmetric structure

Zeshan Alam et al.

STRUCTURAL DESIGN OF TALL AND SPECIAL BUILDINGS (2020)

添加到收藏夹

Article Chemistry, Multidisciplinary

Near‐Infrared Chemiluminescent Carbon Nanodots and Their Application in Reactive Oxygen Species Bioimaging

Cheng‐Long Shen et al.

Advanced Science (2020)

添加到收藏夹

Article Optics

On a universal solution to the transport-of-intensity equation

Jialin Zhang et al.

OPTICS LETTERS (2020)

添加到收藏夹

Article Computer Science, Artificial Intelligence

Fuzzy finite-time stable compensation control for a building structural vibration system with actuator failures

Jianhui Wang et al.

APPLIED SOFT COMPUTING (2020)

添加到收藏夹

Article Chemistry, Physical

Study on solid waste pyrolysis coke catalyst for catalytic cracking of coal tar

Zhang Lei et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2020)

添加到收藏夹

Article Green & Sustainable Science & Technology

Surface morphology assessment of CFRP transverse grinding using CNT nanofluid minimum quantity lubrication

Teng Gao et al.

JOURNAL OF CLEANER PRODUCTION (2020)

添加到收藏夹

Article Chemistry, Multidisciplinary

Degradation of an Organic Dye by Bisulfite Catalytically Activated with Iron Manganese Oxides: The Role of Superoxide Radicals

Haifeng Zhang et al.

ACS OMEGA (2020)

添加到收藏夹

Article Engineering, Civil

Numerical analysis of axially loaded RC columns subjected to the combination of impact and blast loads

Gholamreza Gholipour et al.

ENGINEERING STRUCTURES (2020)

添加到收藏夹

Article Computer Science, Interdisciplinary Applications

Annulus shape tank with convective flow in a porous zone with impose of MHD

Yu-Ming Chu et al.

INTERNATIONAL JOURNAL OF MODERN PHYSICS C (2020)

添加到收藏夹

Article Nanoscience & Nanotechnology

Multifunctional Textiles/Metal-Organic Frameworks Composites for Efficient Ultraviolet Radiation Blocking and Noise Reduction

Kun Zhang et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

添加到收藏夹

Article Chemistry, Physical

Nanoparticle enhanced PCM exergy loss and thermal behavior by means of FVM

Yu-Ming Chu et al.

JOURNAL OF MOLECULAR LIQUIDS (2020)

添加到收藏夹

Article Chemistry, Physical

Influence of wavy enclosure and nanoparticles on heat release rate of PCM considering numerical study

Yu-Ming Chu et al.

JOURNAL OF MOLECULAR LIQUIDS (2020)

添加到收藏夹

Review Engineering, Manufacturing

Vegetable oil-based nanofluid minimum quantity lubrication turning: Academic review and perspectives

Xiaoming Wang et al.

JOURNAL OF MANUFACTURING PROCESSES (2020)

添加到收藏夹

Article Chemistry, Physical

Investigation of nano powders influence on melting process within a storage unit

Yu-Ming Chu et al.

JOURNAL OF MOLECULAR LIQUIDS (2020)

添加到收藏夹

Article Chemistry, Analytical

Polyoxometalate-derived MoS2 nanosheets embedded around iron-hydroxide nanorods as the platform for sensitively determining miRNA-21

Qiaojuan Jia et al.

SENSORS AND ACTUATORS B-CHEMICAL (2020)

添加到收藏夹

Article Engineering, Multidisciplinary

New computational approach for exergy and entropy analysis of nanofluid under the impact of Lorentz force through a porous media

M. Sheikholeslami

COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2019)

添加到收藏夹

Article Engineering, Mechanical

Dispersing mechanism and tribological performance of vegetable oil-based CNT nanofluids with different surfactants

Teng Gao et al.

TRIBOLOGY INTERNATIONAL (2019)

添加到收藏夹

Article Nanoscience & Nanotechnology

Textiles/Metal-Organic Frameworks Composites as Flexible Air Filters for Efficient Particulate Matter Removal

Kun Zhang et al.

ACS APPLIED MATERIALS & INTERFACES (2019)

添加到收藏夹

Article Chemistry, Physical

Influence of NbC particles on microstructure and mechanical properties of AlCoCrFeNi high-entropy alloy coatings prepared by laser cladding

Xiaofeng Li et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2019)

添加到收藏夹

Article Chemistry, Physical

Finite element technique for the analysis of buoyantly convective multiply connected domain as a trapezium enclosure with heated circular obstacle

Khalil Ur Rehman et al.

JOURNAL OF MOLECULAR LIQUIDS (2019)

添加到收藏夹

Article Nanoscience & Nanotechnology

Enhanced Photoresponsivity of a GaAs Nanowire Metal-Semiconductor-Metal Photodetector by Adjusting the Fermi Level

Xue Chen et al.

ACS APPLIED MATERIALS & INTERFACES (2019)

添加到收藏夹

Article Chemistry, Multidisciplinary

Constructing Mononuclear Palladium Catalysts by Precoordination/Solvothermal Polymerization: Recyclable Catalyst for Regioselective Oxidative Heck Reactions

Wen-Hao Li et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2019)

添加到收藏夹

Article Thermodynamics

Effect of hot obstacle position on natural convection heat transfer of MWCNTs-water nanofluid in U-shaped enclosure using lattice Boltzmann method

Yuan Ma et al.

INTERNATIONAL JOURNAL OF NUMERICAL METHODS FOR HEAT & FLUID FLOW (2019)

添加到收藏夹

Article Green & Sustainable Science & Technology

Experimental study on darkening water-rich mud tailings for accelerating desiccation

Yinghong Qin et al.

JOURNAL OF CLEANER PRODUCTION (2019)

添加到收藏夹

Article Thermodynamics

MHD natural convection in a heat generating porous medium-filled wavy enclosures using Buongiorno's nanofluid model

Sameh E. Ahmed et al.

CASE STUDIES IN THERMAL ENGINEERING (2019)

添加到收藏夹

Article Computer Science, Information Systems

Optimizing Multistage Discriminative Dictionaries for Blind Image Quality Assessment

Qiuping Jiang et al.

IEEE TRANSACTIONS ON MULTIMEDIA (2018)

添加到收藏夹

Article Engineering, Mechanical

Conjugate natural convection of Al2O3-water nanofluid in a square cavity with a concentric solid insert using Buongiomo's two-phase model

A. I. Alsabery et al.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2018)

添加到收藏夹

Article Chemistry, Physical

An analytical model for elastic modulus calculation of SiC whisker-reinforced hybrid metal matrix nanocomposite containing SiC nanoparticles

Shenggui Chen et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2018)

添加到收藏夹

Article Engineering, Chemical

Two-phase lattice Boltzmann simulation of natural convection in a Cu-water nanofluid-filled porous cavity: Effects of thermal boundary conditions on heat transfer and entropy generation

Dhrubajyoti Kashyap et al.

ADVANCED POWDER TECHNOLOGY (2018)

添加到收藏夹

Article Green & Sustainable Science & Technology

A new water-retaining paver block for reducing runoff and cooling pavement

Yinghong Qin et al.

JOURNAL OF CLEANER PRODUCTION (2018)

添加到收藏夹

Article Energy & Fuels

Measuring the albedo of limited-extent targets without the aid of known-albedo masks

Yinghong Qin et al.

SOLAR ENERGY (2018)

添加到收藏夹

Article Physics, Applied

Optical properties of quasi-type-II structure in GaAs/GaAsSb/GaAs coaxial single quantum-well nanowires

Haolin Li et al.

APPLIED PHYSICS LETTERS (2018)

添加到收藏夹

Article Food Science & Technology

Antibacterial activity and mechanism of bifidocin A against Listeria monocytogenes

Guorong Liu et al.

FOOD CONTROL (2017)

添加到收藏夹

Article Engineering, Manufacturing

Analysis of grinding mechanics and improved predictive force model based on material-removal and plastic-stacking mechanisms

Yanbin Zhang et al.

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2017)

添加到收藏夹

Article Engineering, Chemical

Soret and Dufour effects on MHD convective flow of Al2O3-water and TiO2-water nanofluids past a stretching sheet in porous media with heat generation/absorption

P. Sudarsana Reddy et al.

ADVANCED POWDER TECHNOLOGY (2016)

添加到收藏夹

Article Green & Sustainable Science & Technology

Experimental evaluation of the lubrication properties of the wheel/workpiece interface in minimum quantity lubrication (MQL) grinding using different types of vegetable oils

Yaogang Wang et al.

JOURNAL OF CLEANER PRODUCTION (2016)

添加到收藏夹

Article Engineering, Chemical

Heatline visualization of natural convection in a trapezoidal cavity partly filled with nanofluid porous layer and partly with non-Newtonian fluid layer

A. I. Alsabery et al.

ADVANCED POWDER TECHNOLOGY (2015)

添加到收藏夹

Article Engineering, Manufacturing

Experimental evaluation of the lubrication performance of MoS2/CNT nanofluid for minimal quantity lubrication in Ni-based alloy grinding

Yanbin Zhang et al.

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2015)

添加到收藏夹

Article Optics

Transport of intensity phase retrieval and computational imaging for partially coherent fields: The phase space perspective

Chao Zuo et al.

OPTICS AND LASERS IN ENGINEERING (2015)

添加到收藏夹

Article Engineering, Mechanical

Control structure interaction of electromagnetic mass damper system for structural vibration control

Chunwei Zhang et al.

JOURNAL OF ENGINEERING MECHANICS-ASCE (2008)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.