The development of new homogenous and heterogeneous catalytic processes for the treatment of low grade palm oil

Low grade crude palm oil (LGCPO) presents as an attractive option as feedstock for biodiesel production due to its low cost and non-competition with food resources. Typically, LGCPO contains high contents of free fatty acids (FFA), rendering it impossible in direct trans-esterification processes due to the saponification reaction. Esterification is the typical pre-treatment process to reduce the FFA content and to produce fatty acid methyl ester (FAME). The pre-treatment of LGCPO using two different acid catalysts, such as titanium oxysulphate sulphuric acid complex hydrate (TiOSH) and 5-sulfosalicylic acid dihydrate (5-SOCAH) was investigated for the first time in this study. The optimum conditions for the homogenous catalyst (5-SOCAH) were determined as: 1.5 wt% of acid catalyst dosage, 60 degrees C reaction temperature, 8:1 methanol molar ratio at 60 min. For the heterogeneous TiOSH, higher catalyst dosages such as 7 wt% is required with a methanol loading of 10:1 (molar ratio) at 120 min to reduce the initial FFA to less than 3%. Under these optimum conditions for both types of catalysts; the FFA levels were reduced from 11.3 % to less than 3 %, individually. This study introduces for the first time two types of acidic catalysts with high catalytic activity for the esterification of FFA content in low grade oils for biodiesel production which could be used for the treatment of wide range of low quality oils. (C) 2021 Elsevier B.V. All rights reserved.

Automated summary

This study investigated the pre-treatment of low grade crude palm oil using two different acid catalysts to reduce the FFA content, achieving significant results in biodiesel production. The research introduced for the first time acidic catalysts with high catalytic activity for esterification of FFA content in low quality oils.