相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。3D printed PCL/SrHA scaffold for enhanced bone regeneration
Dinghua Liu et al.
CHEMICAL ENGINEERING JOURNAL (2019)
Additive Manufacturing Approaches for Hydroxyapatite-Reinforced Composites
Mario Milazzo et al.
ADVANCED FUNCTIONAL MATERIALS (2019)
3D biodegradable scaffolds of polycaprolactone with silicate-containing hydroxyapatite microparticles for bone tissue engineering: high-resolution tomography and in vitro study
Svetlana Shkarina et al.
SCIENTIFIC REPORTS (2018)
Current advances in electrospun gelatin-based scaffolds for tissue engineering applications
Ana A. Aldana et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2017)
Improvement of mechanical strength and osteogenic potential of calcium sulfate-based hydroxyapatite 3-dimensional printed scaffolds by ε-polycarbonate coating
Beom-Su Kim et al.
JOURNAL OF BIOMATERIALS SCIENCE-POLYMER EDITION (2017)
Scaffolds for Bone Tissue Engineering: State of the art and new perspectives
Livia Roseti et al.
MATERIALS SCIENCE AND ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2017)
Production of Poly(ε-Caprolactone)/Hydroxyapatite Composite Scaffolds with a Tailored Macro/Micro-Porous Structure, High Mechanical Properties, and Excellent Bioactivity
Jong-Woo Kim et al.
MATERIALS (2017)
Bio-inspired in situ crosslinking and mineralization of electrospun collagen scaffolds for bone tissue engineering
Chetna Dhand et al.
BIOMATERIALS (2016)
Mesenchymal stem cells: Identification, phenotypic characterization, biological properties and potential for regenerative medicine through biomaterial micro-engineering of their niche
Julianna Kobolak et al.
METHODS (2016)
Fabrication of Porous Materials from Natural/Synthetic Biopolymers and Their Composites
Udeni Gunathilake T. M. Sampath et al.
MATERIALS (2016)
Observation on dengue cases from a virus diagnostic laboratory of a tertiary care hospital in north India
Om Prakash et al.
INDIAN JOURNAL OF MEDICAL RESEARCH (2015)
Pore structure properties of scaffolds constituted by aggregated microparticles of PCL and PCL-HA processed by phase separation
Aurelio Salerno et al.
JOURNAL OF POROUS MATERIALS (2015)
3D Artificial Bones for Bone Repair Prepared by Computed Tomography-Guided Fused Deposition Modeling for Bone Repair
Ning Xu et al.
ACS APPLIED MATERIALS & INTERFACES (2014)
Conductive polymers: Towards a smart biomaterial for tissue engineering
Richard Balint et al.
ACTA BIOMATERIALIA (2014)
Bioengineering of Dental Pulp Stem Cells in a Microporous PNIPAAm-PLGA Scaffold
R. Salehi et al.
INTERNATIONAL JOURNAL OF POLYMERIC MATERIALS AND POLYMERIC BIOMATERIALS (2014)
Polymer-Ceramic Spiral Structured Scaffolds for Bone Tissue Engineering: Effect of Hydroxyapatite Composition on Human Fetal Osteoblasts
Xiaojun Zhang et al.
PLOS ONE (2014)
Wettability of Thin Silicate-Containing Hydroxyapatite Films Formed by RF-Magnetron Sputtering
S. N. Gorodzha et al.
RUSSIAN PHYSICS JOURNAL (2014)
The Osteogenesis of Bone Marrow Stem Cells on mPEG-PCL-mPEG/Hydroxyapatite Composite Scaffold via Solid Freeform Fabrication
Han-Tsung Liao et al.
BIOMED RESEARCH INTERNATIONAL (2014)
Solid freeform fabrication and in-vitro response of osteoblast cells of mPEG-PCL-mPEG bone scaffolds
Cho-Pei Jiang et al.
BIOMEDICAL MICRODEVICES (2013)
Development and characterization of poly(ε-caprolactone) hollow fiber membranes for vascular tissue engineering
Nazely Diban et al.
JOURNAL OF MEMBRANE SCIENCE (2013)
Production, mechanical properties and in vitro biocompatibility of highly aligned porous poly(ε-caprolactone) (PCL)/hydroxyapatite (HA) scaffolds
Won-Young Choi et al.
JOURNAL OF POROUS MATERIALS (2013)
Preparation of a silicate-containing hydroxyapatite-based coating by magnetron sputtering: structure and osteoblast-like MG63 cells in vitro study
M. A. Surmeneva et al.
RSC ADVANCES (2013)
One- and Three-Dimensional Growth of Hydroxyapatite Nanowires during Sol-Gel-Hydrothermal Synthesis
Daniel O. Costa et al.
ACS APPLIED MATERIALS & INTERFACES (2012)
Nanofibrous gelatin-silica hybrid scaffolds mimicking the native extracellular matrix (ECM) using thermally induced phase separation
Bo Lei et al.
JOURNAL OF MATERIALS CHEMISTRY (2012)
Current Trends in Mesenchymal Stem Cell Application in Bone Augmentation: A Review of the Literature
Arash Khojasteh et al.
JOURNAL OF ORAL AND MAXILLOFACIAL SURGERY (2012)
Rarefied gas dynamics aspects of pharmaceutical freeze-drying
Arnab Ganguly et al.
VACUUM (2012)
Fabrication of porous polycaprolactone/hydroxyapatite (PCL/HA) blend scaffolds using a 3D plotting system for bone tissue engineering
Su A. Park et al.
BIOPROCESS AND BIOSYSTEMS ENGINEERING (2011)
Innovation in Monitoring Food Freeze Drying
Roberto Pisano et al.
DRYING TECHNOLOGY (2011)
Preparation and Characterization of Membranes Formed by Nonsolvent Induced Phase Separation: A Review
Gregory R. Guillen et al.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2011)
Thermal Processing of Tissue Engineering Scaffolds
Alisa Morss Clyne
JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME (2011)
Enzyme encapsulation in freeze-dried bionanocomposites prepared from chitosan and xanthan gum blend
Huihua Liu et al.
MATERIALS CHEMISTRY AND PHYSICS (2011)
Osteoinduction of Human Mesenchymal Stem Cells by Bioactive Composite Scaffolds without Supplemental Osteogenic Growth Factors
Alessandro Polini et al.
PLOS ONE (2011)
Biomineralized porous composite scaffolds prepared by chemical synthesis for bone tissue regeneration
M. G. Raucci et al.
ACTA BIOMATERIALIA (2010)
In vitro and in vivo evaluation of a novel nanosize hydroxyapatite particles/poly(ester-urethane) composite scaffold for bone tissue engineering
M. W. Laschke et al.
ACTA BIOMATERIALIA (2010)
Selective laser sintering of hydroxyapatite/poly-ε-caprolactone scaffolds
Szilvia Eosoly et al.
ACTA BIOMATERIALIA (2010)
A new technological procedure using sucrose as porogen compound to manufacture porous biphasic calcium phosphate ceramics of appropriate micro- and macrostructure
A. -M. Le Ray et al.
CERAMICS INTERNATIONAL (2010)
Hybrid composite scaffolds prepared by sol-gel method for bone regeneration
Maria Grazia Raucci et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2010)
Solid Free-Form Fabrication-Based PCL/HA Scaffolds Fabricated with a Multi-head Deposition System for Bone Tissue Engineering
Jong Young Kim et al.
JOURNAL OF BIOMATERIALS SCIENCE-POLYMER EDITION (2010)
Bone tissue engineering therapeutics: controlled drug delivery in three-dimensional scaffolds
Viviana Mourino et al.
JOURNAL OF THE ROYAL SOCIETY INTERFACE (2010)
Polyurethane (PU) scaffolds prepared by solvent casting/particulate leaching (SCPL) combined with centrifugation
DongChoon Sin et al.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2010)
Effect of porogen on the physico-chemical properties and degradation performance of PLGA scaffolds
Rossella Dorati et al.
POLYMER DEGRADATION AND STABILITY (2010)
The return of a forgotten polymer-Polycaprolactone in the 21st century
Maria Ann Woodruff et al.
PROGRESS IN POLYMER SCIENCE (2010)
Bioprinting Endothelial Cells With Alginate for 3D Tissue Constructs
Saif Khalil et al.
JOURNAL OF BIOMECHANICAL ENGINEERING-TRANSACTIONS OF THE ASME (2009)
Synthesis and characterization of nanoporous polycaprolactone membranes via thermally- and nonsolvent-induced phase separations for biomedical device application
Chi Yen et al.
JOURNAL OF MEMBRANE SCIENCE (2009)
Mesenchymal Stem Cells for Bone Repair and Metabolic Bone Diseases
Anita H. Undale et al.
MAYO CLINIC PROCEEDINGS (2009)
Biomimetic materials for tissue engineering
Peter X. Ma
ADVANCED DRUG DELIVERY REVIEWS (2008)
A review of rapid prototyping techniques for tissue engineering purposes
Sanna M. Peltola et al.
ANNALS OF MEDICINE (2008)
Electrospun nanofiber scaffolds for rapid and rich capture of bone marrow-derived hematopoietic stem cells
Kun Ma et al.
BIOMATERIALS (2008)
Bone regeneration of critical calvarial defect in goat model by PLGA/TCP/rhBMP-2 scaffolds prepared by low-temperature rapid-prototyping technology
D. Yu et al.
INTERNATIONAL JOURNAL OF ORAL AND MAXILLOFACIAL SURGERY (2008)
Development of a biodegradable scaffold with interconnected pores by heat fusion and its application to bone tissue engineering
Michael Shin et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A (2008)
Poly(3-hydroxybutyrate-co-3-hydroxyvalerate)/poly(ε-caprolactone) blends for tissue engineering applications in the form of hollow fibers
Valeria Chiono et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A (2008)
Study on the Cell Structure and Compressive Behavior of Biodegradable Poly(ε-caprolactone) Foam
Hao Liu et al.
POLYMER ENGINEERING AND SCIENCE (2008)
Fabrication of three-dimensional polycaprolactone/hydroxyapatite tissue scaffolds and osteoblast-scaffold interactions in vitro
Lauren Shor et al.
BIOMATERIALS (2007)
Processing and biocompatibility evaluation of laser processed porous titanium
Weichang Xue et al.
ACTA BIOMATERIALIA (2007)
Fabrication and in vitro characterization of three-dimensional organic/inorganic scaffolds by robocasting
J. Russias et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A (2007)
Osteochondral defects: present situation and tissue engineering approaches
J. F. Mano et al.
JOURNAL OF TISSUE ENGINEERING AND REGENERATIVE MEDICINE (2007)
Design and development of three-dimensional scaffolds for tissue engineering
C. Liu et al.
CHEMICAL ENGINEERING RESEARCH & DESIGN (2007)
An electrospun triphasic nanofibrous scaffold for bone tissue engineering
S. A. Catledge et al.
BIOMEDICAL MATERIALS (2007)
Polyurethane/poly(lactic-co-glycolic) acid composite scaffolds fabricated by thermally induced phase separation
A. S. Rowlands et al.
BIOMATERIALS (2007)
Pore throat size and connectivity determine bone and tissue ingrowth into porous implants: Three-dimensional micro-CT based structural analyses of porous bioactive titanium implants
Bungo Otsuki et al.
BIOMATERIALS (2006)
Preparation of polycaprolactone tissue engineering scaffolds by improved solvent casting/particulate leaching method
Qing Yang et al.
JOURNAL OF MACROMOLECULAR SCIENCE PART B-PHYSICS (2006)
Design and preparation of polymeric scaffolds for tissue engineering
Thomas Weigel et al.
EXPERT REVIEW OF MEDICAL DEVICES (2006)
Novel bone scaffolds of electrospun polycaprolactone fibers filled with nanoparticles
P Wutticharoenmongkol et al.
JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY (2006)
Preparation and characterization of highly porous, biodegradable polyurethane scaffolds for soft tissue applications
JJ Guan et al.
BIOMATERIALS (2005)
Bioactive composite materials for tissue engineering scaffolds
AR Boccaccini et al.
EXPERT REVIEW OF MEDICAL DEVICES (2005)
Porosity of 3D biomaterial scaffolds and osteogenesis
V Karageorgiou et al.
BIOMATERIALS (2005)
Morphology development and characterization of the phase-separated structure resulting from the thermal-induced phase separation phenomenon in polymer solutions under a temperature gradient
KWD Lee et al.
CHEMICAL ENGINEERING SCIENCE (2004)
Nano-biotechnology: carbon nanofibres as improved neural and orthopaedic implants
TJ Webster et al.
NANOTECHNOLOGY (2004)
Scaffolds for tissue fabrication
Peter X. Ma
MATERIALS TODAY (2004)
Bioresorbable and bioactive composite materials based on polylactide foams filled with and coated by Bioglass® particles for tissue engineering applications
AR Boccaccini et al.
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE (2003)
Rapid prototyping of scaffolds derived from thermoreversible hydrogels and tailored for applications in tissue engineering
R Landers et al.
BIOMATERIALS (2002)
Effect of different particles on cell proliferation in polymer scaffolds using a solvent-casting and particulate leaching technique
SW Suh et al.
ASAIO JOURNAL (2002)
Fused deposition modeling of novel scaffold architectures for tissue engineering applications
I Zein et al.
BIOMATERIALS (2002)
The design of scaffolds for use in tissue engineering. Part 1. Traditional factors
SF Yang et al.
TISSUE ENGINEERING (2001)
Water-based sol-gel synthesis of hydroxyapatite: process development
DM Liu et al.
BIOMATERIALS (2001)
分享论文
