相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。Review on modeling and simulation of microstructure evolution during dynamic recrystallization using cellular automaton method
HuaJia Zhu et al.
SCIENCE CHINA-TECHNOLOGICAL SCIENCES (2020)
Modelling continuous dynamic recrystallization of aluminum alloys based on the polycrystal plasticity approach
S. F. Chen et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2020)
Quasi-static and dynamic response, and texture evolution of two overaged Al 7056 alloy plates in T761 and T721 tempers: Experiments and modeling
Angela Y. Ku et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2020)
Hot Workability Characteristics and Optimization of Processing Parameters of 7475 Aluminum Alloy Using 3D Processing Map
Yang Liu et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2020)
Effect of Grain Structure on Recrystallization Behavior of Al-Zn-Mg-Cu Alloy during Isothermal Forging
Jiuhui Zhao et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2020)
Recent Development of Superplasticity in Aluminum Alloys: A Review
Laxman Bhatta et al.
METALS (2020)
Hot Deformation Behavior Considering Strain Effects and Recrystallization Mechanism of an Al-Zn-Mg-Cu Alloy
Lei Luo et al.
MATERIALS (2020)
Effects of deformation parameters and stress triaxiality on the fracture behaviors and microstructural evolution of an Al-Zn-Mg-Cu alloy
Y.C. Lin et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2020)
Improvement of anisotropic tensile properties of Al-7.9Zn-2.7Mg-2.0Cu alloy sheets by particle stimulated nucleation
Qianhao Zang et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2020)
Grain refining with DDRX by isothermal MDF of Al-Zn-Mg-Cu alloy
Jiuhui Zhao et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2020)
Diffusional and dislocation accommodation mechanisms in superplastic materials
Hiroshi Masuda et al.
ACTA MATERIALIA (2020)
Experimental study of the superplastic deformation mechanisms of high-strength aluminum-based alloy
O. A. Yakovtseva et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)
The effect of strain rates on the microstructure and the mechanical properties of an over-aged Al-Zn-Mg-Cu alloy
Muhammad Abubaker Khan et al.
MATERIALS CHARACTERIZATION (2020)
Rheological behavior and dynamic softening mechanism of AA7075 sheet under isothermal tensile deformation
Jue Lu et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2020)
A Review of Microstructural Evolution and Modelling of Aluminium Alloys under Hot Forming Conditions
Jiaxin Lv et al.
METALS (2020)
Integrated physically based modeling for the multiple static softening mechanisms following multi-stage hot deformation in Al-Zn-Mg-Cu alloys
Jie Tang et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2020)
On Kinetics of Grain Refinement and Strengthening by Dynamic Recrystallization
Andrey Belyakov et al.
ADVANCED ENGINEERING MATERIALS (2019)
Grain structure and precipitate variations in 7003-T6 aluminum alloys associated with high strain rate deformation
Hong He et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Effects of Initial Grain Size of Al-Zn-Mg-Cu Alloy on the Recrystallization Behavior and Recrystallization Mechanism in Isothermal Compression
Jiuhui Zhao et al.
METALS (2019)
Quantification of multiple softening processes occurring during multi-stage thermoforming of high-strength steel
Rong Zeng et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2019)
Recent advances in ageing of 7xxx series aluminum alloys: A physical metallurgy perspective
Abolfazl Azarniya et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2019)
Effects of initial microstructure on hot deformation behavior of Al-7.9Zn-2.7Mg-2.0Cu (wt%) alloy
Qianhao Zang et al.
MATERIALS CHARACTERIZATION (2019)
Effect of temperature and strain rate on the grain structure during the multi-directional forging of the Al-Zn-Mg-Cu alloy
Jiuhui Zhao et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Precipitation behavior and high strain rate superplasticity in a novel fine-grained aluminum based alloy
A. V. Mikhaylovskaya et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Simulation of dynamic recrystallization for an Al-Zn-Mg-Cu alloy using cellular automaton
Jie Zhang et al.
PROGRESS IN NATURAL SCIENCE-MATERIALS INTERNATIONAL (2019)
Mechanical behavior and deformation mechanism of 7075 aluminum alloy tor under solution induced dynamic strain aging
Pu Zhou et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Constructing processing maps for hot deformation and microstructural evolution of Al-Zn-Mg-Cu alloys
Guohui Shi et al.
MATERIALS RESEARCH EXPRESS (2019)
Influence of homogenisation time on evolution of eutectic phases, dispersoid behaviour and crystallographic texture for Al-Zn-Mg-Cu-Ag alloy
Abhishek Ghosh et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2019)
Superplastic Tensile Deformation Behavior and Microstructural Evolution of Al-Zn-Mg-Cu Alloy
Guangyu Li et al.
METALS (2019)
Influence of strain rate on hot deformation behavior and recrystallization behavior under isothermal compression of Al-Zn-Mg-Cu alloy
Jiuhui Zhao et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2019)
Mechanisms of Superplastic High-Rate Deformation in the Al-Mg-Zn-Fe-Ni-Zr-Sc Alloy
O. A. Yakovtseva et al.
PHYSICS OF METALS AND METALLOGRAPHY (2019)
Analysis of flow stress and microstructure during hot compression of 6099 aluminum alloy (AA6099)
Ahmad Chamanfar et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Effect of the Strain and Strain Rate on Microstructure Evolution and Superplastic Deformation Mechanisms
O. A. Yakovtseva et al.
PHYSICS OF METALS AND METALLOGRAPHY (2019)
Modeling of continuous dynamic recrystallization of Al-Zn-Cu-Mg alloy during hot deformation based on the internal-state-variable (ISV) method
Z. C. Sun et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2018)
Effect of temperature of isothermal multidirectional forging on microstructure development in the Al-Mg alloy with nano-size aluminides of Sc and Zr
O. Sitdikov et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2018)
Hot deformation behavior and microstructure evolution of annealed Al-7.9Zn-2.7Mg-2.0Cu (wt%) alloy
Qianhao Zang et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2018)
A physically-based constitutive modelling of a high strength aluminum alloy at hot working conditions
Hongming Zhang et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2018)
Study on hot compressive deformation behaviors and corresponding industrial extrusion of as-homogenized Al-7.82Zn-1.96Mg-2.35Cu-0.11Zr alloy
Weiyi Wang et al.
JOURNAL OF MATERIALS SCIENCE (2018)
Characterization of hot extrusion and heat treatment on mechanical properties in a spray formed ultra-high strength Al-Zn-Mg-Cu alloy
Xiangdong Wang et al.
MATERIALS CHARACTERIZATION (2018)
Constitutive descriptions and microstructure evolution of extruded A5083 aluminum alloy during hot compression
Sheng Ding et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
Comparison between superplastic deformation mechanisms at primary and steady stages of the fine grain AA7475 aluminium alloy
A. V. Mikhaylovskaya et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
Al-Mg-Fe-Ni based alloy for high strain rate superplastic forming
A. A. Kishchik et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
Development of adiabatic shearing bands in 7003-T4 aluminum alloy under high strain rate impacting
Xiaodong Wu et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
Back-stresses and geometrical hardening as competing mechanisms enhancing ductility in HCP metals
D. Esque-de los Ojos et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
A unified constitutive model based on dislocation density for an Al-Zn-Mg-Cu alloy at time-variant hot deformation conditions
Y. C. Lin et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
Effect of strain rate on the recrystallization mechanism during isothermal compression in 7050 aluminum alloy
Jiuhui Zhao et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
Effect of strain rate and temperature on dynamic mechanical behavior and microstructure evolution of ultra-high strength aluminum alloy
Weiliang Zhang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
The double-edge effect of second-phase particles on the recrystallization behaviour and associated mechanical properties of metallic materials
Ke Huang et al.
PROGRESS IN MATERIALS SCIENCE (2018)
Dynamic anisotropic grain growth during superplasticity in Al-Mg-Mn alloy
Hiroshi Masuda et al.
SCRIPTA MATERIALIA (2018)
Effects of Temperature and Strain Rate on the Fracture Behaviors of an Al-Zn-Mg-Cu Alloy
Yue Guo et al.
MATERIALS (2018)
A Review on Superplastic Formation Behavior of Al Alloys
Xiao-guo Wang et al.
ADVANCES IN MATERIALS SCIENCE AND ENGINEERING (2018)
Cavity Behavior of Fine-Grained 5A70 Aluminum Alloy during Superplastic Formation
Sheng Li et al.
METALS (2018)
Study on Hot Workability of Al-5.87Zn-2.07Mg-2.28Cu Alloy Using Processing Map
Dan Xiao et al.
JOM (2017)
Compressive deformation behavior and microstructure evolution of AM80 magnesium alloy under quasi-static and dynamic loading
Pengcheng Guo et al.
INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2017)
Strength differential effect in age hardened aluminum alloys
Jens Kristian Holmen et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2017)
A polycrystal plasticity based discontinuous dynamic recrystallization simulation method and its application to copper
Guowei Zhou et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2017)
Enhanced plasticity and corrosion resistance of high strength Al-Zn-Mg-Cu alloy processed by an improved thermomechanical processing
Jinrong Zuo et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2017)
Dislocation substructures evolution and an adaptive-network- based fuzzy inference system model for constitutive behavior of a Ni-based superalloy during hot deformation
Dong-Dong Chen et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2017)
Heating rate effect on particle stimulated nucleation and grains structure during non-isothermal annealing of multi-directionally forged solution treated AA2024
Saeed Khani Moghanaki et al.
MATERIALS CHARACTERIZATION (2017)
Effect of deformation induced precipitation on grain refinement and improvement of mechanical properties AA 7055 aluminum alloy
Jinrong Zuo et al.
MATERIALS CHARACTERIZATION (2017)
Hot deformation behavior and microstructure of strain compression AA2195 alloy under plane
Qingbo Yang et al.
MATERIALS CHARACTERIZATION (2017)
High strain rate superplasticity in an Al-Mg-Sc-Zr alloy processed via simple rolling
Mengjia Li et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
Stacking fault tetrahedron induced plasticity in copper single crystal
Liang Zhang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
Flow Behavior and Microstructural Evolution of 7A85 High-Strength Aluminum Alloy During Hot Deformation
Xingang Liu et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2017)
Analysis of Particle-Stimulated Nucleation (PSN)-Dominated Recrystallization for Hot-Rolled 7050 Aluminum Alloy
Khaled F. Adam et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2017)
A review on the strain rate dependency of the dynamic viscoplastic response of FCC metals
Francisco C. Salvado et al.
PROGRESS IN MATERIALS SCIENCE (2017)
Evaluation of the mechanical anisotropy and the deformation mechanism in a multi-pass friction stir processed Al-Zn-Mg-Cu alloy
Alberto Orozco-Caballero et al.
MATERIALS & DESIGN (2017)
Recrystallization behavior of multi-directionally forged over-aged and solution treated Al-Cu-Mg alloy during non-isothermal annealing
Saeed Khani Moghanaki et al.
MATERIALS & DESIGN (2017)
Multi-scale study of microstructure evolution in hot extruded nano-sized TiB2 particle reinforced aluminum composites
Z. Chen et al.
MATERIALS & DESIGN (2017)
On adiabatic shear localization in nanostructured face-centered cubic alloys with different stacking fault energies
Jianguo Li et al.
ACTA MATERIALIA (2017)
Two-dimensional grain boundary sliding and mantle dislocation accommodation in ODS ferritic steel
Hiroshi Masuda et al.
ACTA MATERIALIA (2016)
On the mechanisms of superplasticity in Ti-6Al-4V
E. Alabort et al.
ACTA MATERIALIA (2016)
Deformation behavior and microstructural evolution of 7075-T6 aluminum alloy at cryogenic temperatures
Woei-Shyan Lee et al.
CRYOGENICS (2016)
A three-dimensional cellular automata-crystal plasticity finite element model for predicting the multiscale interaction among heterogeneous deformation, DRX microstructural evolution and mechanical responses in titanium alloys
Hongwei Li et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2016)
Superplasticity of high-strength Al-based alloys produced by thermomechanical treatment
A. D. Kotov et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2016)
Difference in the Hot Compressive Behavior and Processing Maps between the As-cast and Homogenized Al-Zn-Mg-Cu (7075) Alloys
S. Y. Park et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2016)
Flow behavior and microstructure evolution of 7055 aluminum alloy impacted at high strain rates
Shengdan Liu et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
Effects of strain rate on flow stress behavior and dynamic recrystallization mechanism of Al-Zn-Mg-Cu aluminum alloy during hot deformation
Qunying Yang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
Superplastic behaviour of Al-Mg-Zn-Zr-Sc-based alloys at high strain rates
A. V. Mikhaylovskaya et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
Effect of microstructure on hot tensile deformation behavior of 7075 alloy sheet fabricated by twin roll casting
Lei Wang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
Shear strain localization in AA 2219-T8 aluminum alloy at high strain rates
G. M. Owolabi et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
Hot deformation behavior and constitutive equation of a new type Al-Zn-Mg-Er-Zr alloy during isothermal compression
H. Wu et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
Modeling of flow behavior for 7050-T7451 aluminum alloy considering microstructural evolution over a wide range of strain rates
Guang Chen et al.
MECHANICS OF MATERIALS (2016)
A Study on the Effect of Strain Rate on the Dynamic Recrystallization Mechanism of Alloy 617B
He Jiang et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2016)
Dynamic recrystallization behavior of 7085 aluminum alloy during hot deformation
Dong-feng Li et al.
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2016)
Physically based constitutive analysis and microstructural evolution of AA7050 aluminum alloy during hot compression
S. Wang et al.
MATERIALS & DESIGN (2016)
Microstructural evolution and constitutive equations of Inconel 718 alloy under quasi-static and quasi-dynamic conditions
M. Azarbarmas et al.
MATERIALS & DESIGN (2016)
A review of dynamic recrystallization phenomena in metallic materials
K. Huang et al.
MATERIALS & DESIGN (2016)
Tensile behaviour of aluminium 7017 alloy at various temperatures and strain rates
Ravindranadh Bobbili et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2016)
Microstructural evolution of a 304-type austenitic stainless steel during rolling at temperatures of 773-1273 K
Zhanna Yanushkevich et al.
ACTA MATERIALIA (2015)
Coupled crystal plasticity - Probabilistic cellular automata approach to model dynamic recrystallization in magnesium alloys
E. Popova et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2015)
A new method for fabrication of in situ Al/Al3Ti-Al2O3 nanocomposites based on thermal decomposition of nanostructured tialite
Abolfazl Azarniya et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2015)
Dynamic restoration mechanism and physically based constitutive model of 2050 Al-Li alloy during hot compression
Ruihua Zhu et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2015)
EBSD study of a hot deformed nickel-based superalloy
Y. C. Lin et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2015)
Effect of heterogeneously distributed pre-existing dispersoids on the recrystallization behavior of a cold-rolled Al-Mn-Fe-Si alloy
K. Huang et al.
MATERIALS CHARACTERIZATION (2015)
Dynamic behavior of a 6069 Al alloy under hot compression
Feng-jun Zhu et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2015)
Hot ductility behavior of an extruded 7075 aluminum alloy
M. Taheri-Mandarjani et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2015)
Hot Tensile Deformation Behavior of Twin Roll Casted 7075 Aluminum Alloy
Lei Wang et al.
METALS AND MATERIALS INTERNATIONAL (2015)
Thermal decomposition of nanostructured Aluminum Titanate in an active Al matrix: A novel approach to fabrication of in situ Al/Al2O3-Al3Ti composites
Abolfazi Azarniya et al.
MATERIALS & DESIGN (2015)
A high-strength aluminium-based alloy with advanced superplasticity
A. V. Mikhaylovskaya et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2014)
Determination of Johnson-Cook Parameters for Cast Aluminum Alloys
Sachin Gupta et al.
JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY-TRANSACTIONS OF THE ASME (2014)
Analysis of Nonisothermal Deep Drawing of Aluminum Alloy Sheet With Induced Anisotropy and Rate Sensitivity at Elevated Temperatures
Kamyar Ghavam et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2014)
Constitutive modeling of deformation in high temperature of a forging 6005A aluminum alloy
L. Shi et al.
MATERIALS & DESIGN (2014)
Hot tensile deformation behaviors and constitutive model of an Al-Zn-Mg-Cu alloy
Mi Zhou et al.
MATERIALS & DESIGN (2014)
Relationship between mechanical properties and microstructural response of 6061-T6 aluminum alloy impacted at elevated temperatures
Woei-Shyan Lee et al.
MATERIALS & DESIGN (2014)
A physical-based constitutive relation to predict flow stress for Cu-0.4Mg alloy during hot working
Guoliang Ji et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2014)
Effect of Zr addition on hot deformation behavior and microstructural evolution of AA7150 aluminum alloy
Cangji Shi et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2014)
Hot deformation behavior of AA7085 aluminum alloy during isothermal compression at elevated temperature
Wenyi Liu et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2014)
Mechanical properties of 7475 aluminum alloy sheets with fine subgrain structure by warm rolling
Hiroki Tanaka et al.
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2014)
Microstructural Evolutions of AA7055 Aluminum Alloy Under Dynamic and Quasi-static Compressions
Yuanyuan Xiong et al.
ACTA METALLURGICA SINICA-ENGLISH LETTERS (2014)
Microstructural Evolution and Dynamic Softening Mechanisms of Al-Zn-Mg-Cu Alloy during Hot Compressive Deformation
Cangji Shi et al.
MATERIALS (2014)
Failure of AA 6061 and 2099 aluminum alloys under dynamic shock loading
A. G. Odeshi et al.
ENGINEERING FAILURE ANALYSIS (2013)
Crystal plasticity modeling of the dynamic recrystallization of two-phase titanium alloys during isothermal processing
Hongwei Li et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2013)
Effect of extrusion temperature on texture evolution and recrystallization in extruded Mg-1% Mn and Mg-1% Mn-1.6% Sr alloys
Hemant Borkar et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2013)
Hot deformation and processing map of a typical Al-Zn-Mg-Cu alloy
Y. C. Lin et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2013)
Foundation and application of Al-Zn-Mg-Cu alloy flow stress constitutive equation in friction screw press die forging
Lei Xu et al.
MATERIALS & DESIGN (2013)
The effects of grain size on the hot deformation and processing map for 7075 aluminum alloy
Yongbiao Yang et al.
MATERIALS & DESIGN (2013)
On the interactions between strain path reversal and dynamic recrystallisation in 316L stainless steel studied by hot torsion
L. Sun et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2013)
Achieving superplasticity in ultrafine-grained metals
Terence G. Langdon
MECHANICS OF MATERIALS (2013)
Dislocation annihilation in plastic deformation: II. Kocks-Mecking Analysis
E. I. Galindo-Nava et al.
ACTA MATERIALIA (2012)
High-Strain-Rate Deformation: Mechanical Behavior and Deformation Substructures Induced
George T. (Rusty) Gray
ANNUAL REVIEW OF MATERIALS RESEARCH, VOL 42 (2012)
A characterization for the dynamic recrystallization kinetics of as-extruded 7075 aluminum alloy based on true stress-strain curves
Guo-zheng Quan et al.
COMPUTATIONAL MATERIALS SCIENCE (2012)
Effects of Sc and Zr microalloying additions and aging time at 120 °C on the corrosion behaviour of an Al-Zn-Mg alloy
Ying Deng et al.
CORROSION SCIENCE (2012)
Variable strain rate sensitivity in an aluminum alloy: Response and constitutive modeling
Akhtar S. Khan et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2012)
Hot compressive deformation behavior of 7075 Al alloy under elevated temperature
Y. C. Lin et al.
JOURNAL OF MATERIALS SCIENCE (2012)
Microstructure evolution and mechanical properties of back extruded 7075 aluminum alloy at elevated temperatures
M. R. Rokni et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2012)
The deformation behavior and processing maps in the isothermal compression of 7A09 aluminum alloy
J. Luo et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2012)
Study of hot deformation of an Al-Cu-Mg alloy using processing maps and microstructural characterization
C. M. Cepeda-Jimenez et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2012)
The flow behavior and constitutive equations in isothermal compression of 7050 aluminum alloy
B. Wu et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2012)
Evaluation of thermal stability of ultrafine grained aluminium matrix composites reinforced with carbon nanotubes
Joanna Lipecka et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2011)
High-temperature dynamic deformation of aluminum alloys using SHPB
Ouk Sub Lee et al.
JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY (2011)
A critical review of experimental results and constitutive descriptions for metals and alloys in hot working
Y. C. Lin et al.
MATERIALS & DESIGN (2011)
Particle effects on recrystallization in magnesium-manganese alloys: Particle pinning
J. D. Robson et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2011)
Effects of microstructure on the adiabatic shearing behaviors of titanium alloy
Y. Yang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2011)
A Study on Microstructural Evolution and Dynamic Recrystallization During Isothermal Deformation of a Ti-Modified Austenitic Stainless Steel
Sumantra Mandal et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2011)
Dynamic grain growth and particle coarsening in Al-3.5Cu
O. V. Rofman et al.
ACTA MATERIALIA (2010)
Diffusion creep and superplasticity in aluminium alloys
K. Sotoudeh et al.
ACTA MATERIALIA (2010)
A dislocation density-based single crystal constitutive equation
M. G. Lee et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2010)
Evolution of microstructures and textures of 7050 Al alloy hot-rolled plate during staged solution heat-treatments
Yun-Lai Deng et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2010)
Effects of pre-notches on the self-organization behaviors of shear bands in aluminum alloy
Y. Yang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2010)
Hot rolling textures of Al-Cu-Li and Al-Zn-Mg-Cu aeronautical alloys: Experiments and simulations to high strains
Q. Contrepois et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2010)
Influence of cooling rate after homogenization on the flow behavior of aluminum alloy 7050 under hot compression
Shengdan Liu et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2010)
Superplasticity, dynamic grain growth and deformation mechanism in ultra-light two-phase magnesium-lithium alloys
F. R. Cao et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2010)
Effect of second-phase particle morphology on grain growth kinetics
Kunok Chang et al.
ACTA MATERIALIA (2009)
Continuous dynamic recrystallization during the transient severe deformation of aluminum alloy 7475
T. Sakai et al.
ACTA MATERIALIA (2009)
Modelling discontinuous dynamic recrystallization using a physically based model for nucleation
D. G. Cram et al.
ACTA MATERIALIA (2009)
Improvement in formability of aluminum alloy sheet by enhancing geometrical hardening
Kengo Yoshida et al.
COMPUTATIONAL MATERIALS SCIENCE (2009)
Study of dynamic grain growth by electron microscopy and EBSD
O. V. Rofman et al.
JOURNAL OF MICROSCOPY-OXFORD (2009)
Hot deformation behavior of 7150 aluminum alloy during compression at elevated temperature
Nengping Jin et al.
MATERIALS CHARACTERIZATION (2009)
Hot deformation and processing maps of an Al-5.7 wt.%Mg alloy with erbium
Meng Gang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2009)
Flow behavior and microstructural evolution of Al-Cu-Mg-Ag alloy during hot compression deformation
Xiao Yan Liu et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2009)
Superplastic Behavior of a High-Strength Al-Zn-Mg-Cu-Zr Alloy
A. Kumar et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2009)
Low-temperature superplasticity of Al-Mg-Sc alloy produced by friction stir processing
F. C. Liu et al.
SCRIPTA MATERIALIA (2009)
A dislocation-based constitutive law for pure Zr including temperature effects
I. J. Beyerlein et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2008)
Deformation behavior and microstructure evolution of 7050 aluminum alloy during high temperature deformation
H. E. Hu et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2008)
Prediction of 42CrMo steel flow stress at high temperature and strain rate
Y. C. Lin et al.
MECHANICS RESEARCH COMMUNICATIONS (2008)
Hot deformation and recrystallization of austenitic stainless steel: Part I. Dynamic recrystallization
A. Dehghan-Manshadi et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2008)
Analysis of grain growth during superplastic deformation
K. M. Liew et al.
MECHANICS OF ADVANCED MATERIALS AND STRUCTURES (2007)
Dynamic shear band formation in Aluminum 6061-T6 and Aluminum 6061-T6/Al2O3 composites
G. M. Owolabi et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2007)
Principles of superplasticity in ultrafine-grained materials
Megumi Kawasaki et al.
JOURNAL OF MATERIALS SCIENCE (2007)
Contribution of microstructural parameters to strengthening in an ultrafine-grained Al-7% Si alloy processed by severe deformation
I. Gutierrez-Urrutia et al.
ACTA MATERIALIA (2007)
Deformation behavior and dynamic recrystallization of a Mg-Zn-Y-Zr alloy
Ya Zhang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2006)
Simultaneous grain boundary migration and grain rotation
M Upmanyu et al.
ACTA MATERIALIA (2006)
Grain boundary sliding revisited: Developments in sliding over four decades
TG Langdon
JOURNAL OF MATERIALS SCIENCE (2006)
Microstructure and texture evolution in the tension of superplastic Al-6Cu-0.4Zr
PS Bate et al.
ACTA MATERIALIA (2005)
Continuous dynamic recrystallization in an Al-Li-Mg-Sc alloy during equal-channel angular extrusion
R Kaibyshev et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2005)
Effects of grain growth on grain-boundary diffusion creep by molecular-dynamics simulation
AJ Haslam et al.
ACTA MATERIALIA (2004)
Low stress creep behaviour of 7075 high strength aluminium alloy
V Srivastava et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2004)
Evaluation of microstructure and superplasticity in friction stir processed 5083 Al alloy
I Charit et al.
JOURNAL OF MATERIALS RESEARCH (2004)
Progress in structural materials for aerospace systems
JC Williams et al.
ACTA MATERIALIA (2003)
Superplastic deformation behavior of 7075 aluminum alloy
T Sahraoui et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2003)
A model of continuous dynamic recrystallization
S Gourdet et al.
ACTA MATERIALIA (2003)
Effect of initial microstructures on grain refinement in a stainless steel by large strain deformation
A Belyakov et al.
ACTA MATERIALIA (2003)
Superplasticity and grain boundary sliding characteristics in two stage deformation of Mg-3Al-lZn alloy sheet
JC Tan et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2003)
Dynamic evolution of new grains in magnesium alloy AZ31 during hot deformation
XY Yang et al.
MATERIALS TRANSACTIONS (2003)
Model of plastic deformation for extreme loading conditions
DL Preston et al.
JOURNAL OF APPLIED PHYSICS (2003)
Effect of grain boundary character distribution (GBCD) on the cavitation behaviour during superplastic deformation of Al 7475
CL Chen et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2002)
Superplastic deformation behaviour of friction stir processed 7075Al alloy
ZY Ma et al.
ACTA MATERIALIA (2002)
Continuous dynamic recrystallization in a superplastic 7075 aluminum alloy
XY Yang et al.
MATERIALS TRANSACTIONS (2002)
Nucleation of new grains during discontinuous dynamic recrystallization of 99.998 mass% aluminum at 453 K
H Yamagata et al.
SCRIPTA MATERIALIA (2001)
Coupled quantitative simulation of microstructural evolution and plastic flow during dynamic recrystallization
R Ding et al.
ACTA MATERIALIA (2001)
The effect of deformation on grain growth in Zener pinned systems
P Bate
ACTA MATERIALIA (2001)
Correlation of plastic deformation and dynamic recrystallization in magnesium alloy Zk60
A Galiyev et al.
ACTA MATERIALIA (2001)
Cavity growth and filament formation of superplastically deformed Al 7475 Alloy
CL Chen et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2001)
Microstructural modeling and numerical analysis for the superplastic forming process
H Tan et al.
MATERIALS AND MANUFACTURING PROCESSES (2001)
On the grain size softening in nanocrystalline materials
H Conrad et al.
SCRIPTA MATERIALIA (2000)
An experimental study of the recrystallization mechanism during hot deformation of aluminium
S Gourdet et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2000)
分享论文
