Efficacy of green waste-derived biochar for lead removal from aqueous systems: Characterization, equilibrium, kinetic and application

The removal of toxic metals from the aquatic ecosystem is one of the most pressing environmental and public health concerns today. A strong potential has recently emerged for the removal of such metals using biochar sorbents. Biosorption technology could make a significant difference in the future. It is a viable and cost-effective alternative to the remediation of toxic pollutants utilizing various biomaterials. In the current study, batch and fixed-bed studies were performed to evaluate the performance of Capsicum annuum L. seeds biochar (CASB) as an alternative material in removing toxic Pb(II) from aqueous solutions. Removal characteristics were investigated by considering the equilibrium and kinetic aspects. Biosorption equilibrium was established within 40 min. The optimum dosage of CASB for Pb(II) removal was determined as 2.0 g L-1. Biosorption data were well predicted by a non-linear Langmuir isotherm model. Monolayer biosorption occurred for CASB with a maximum capacity of 36.43 mg g-1. Biosorption kinetics fitted well with a pseudo-first-order kinetic model. The external mass transfer may control Pb(II) transport mechanism. Dynamic flow mode biosorption and regeneration potential of CASB were also examined. The application of CASB exhibited a 100% removal yield in real apple juice samples spiked with low concentrations of Pb(II). Exhausted points for the CASB packed columns were recorded as 195 and 320 min for simulated wastewater (SW) and synthetic Pb(II) solution, respectively. FTIR, BET, SEM-EDX analysis, and zeta potential measurements were used for the characterization of biochar and assessment of the metal ion-biosorbent interaction mechanism. Finally, our study provides a practical approach for the uptake of Pb(II) ions from contaminated solutions.

Automated summary

The study investigated the potential of using Capsicum annuum L. seeds biochar (CASB) as an alternative material for removing toxic Pb(II) from aqueous solutions. It was found that biosorption equilibrium was established within 40 minutes, with an optimum dosage of 2.0 g L-1 and a maximum monolayer biosorption capacity of 36.43 mg g-1.