相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。Microstructure tailoring of Al0.5CoCrFeMnNi to achieve high strength and high uniform strain using severe plastic deformation and an annealing treatment
H. T. Jeong et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2021)
Corrosion resistant nanostructured eutectic high entropy alloy
S. Shuang et al.
CORROSION SCIENCE (2020)
Constitutive modelling of hot deformation behaviour of a CoCrFeMnNi high-entropy alloy
Madan Patnamsetty et al.
SCIENCE AND TECHNOLOGY OF ADVANCED MATERIALS (2020)
Hot workability of Co-Fe-Mn-Ni-Ti eutectic high entropy alloy
Reliance Jain et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2020)
Operation of solute-drag creep in an AlCoCrFeMnNi high-entropy alloy and enhanced hot workability
H. T. Jeong et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2020)
Thermal Spray High-Entropy Alloy Coatings: A Review
Ashok Meghwal et al.
JOURNAL OF THERMAL SPRAY TECHNOLOGY (2020)
A novel equiaxed eutectic high-entropy alloy with excellent mechanical properties at elevated temperatures
Liuliu Han et al.
MATERIALS RESEARCH LETTERS (2020)
Easy construction of processing maps for metallic alloys using a flow instability criterion based on power-law breakdown
W. J. Kim et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2020)
Chock Evolution of phases, hardness and magnetic properties of AlCoCrFeNi high entropy alloy processed by mechanical alloying
Vikas Shivam et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2020)
High temperature deformation behavior of dual-phase Al0.6CoCrFeNi high-entropy alloys
Tangqing Cao et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2020)
The tribological properties of Al0.6CoCrFeNi high-entropy alloy with the σ phase precipitation at elevated temperature
Ming Chen et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2019)
Materials-structure-property correlation study of spark plasma sintered AlCuCrFeMnWx (x=0, 0.05, 0.1, 0.5) high-entropy alloys
Devesn Kumar et al.
JOURNAL OF MATERIALS RESEARCH (2019)
Dynamic recrystallization behaviour of AlxCoCrFeNi high entropy alloys during high-temperature plane strain compression
Murugesan Annasamy et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
High-entropy alloys fabricated via powder metallurgy. A critical review
J. M. Torralba et al.
POWDER METALLURGY (2019)
High-temperature deformation mechanisms and processing maps of equiatomic CoCrFeMnNi high-entropy alloy
H. T. Jeong et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Effects of large amounts of Mg (5-13 wt%) on hot compressive deformation behavior and processing maps of Al-Mg alloys
H. T. Jeong et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2019)
High-entropy alloys
Easo P. George et al.
NATURE REVIEWS MATERIALS (2019)
The effect of Al to high-temperature deformation mechanisms and processing maps of Al0.5CoCrFeMnNi high entropy alloy
W. J. Kim et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2019)
Modeling the effect of temperature on the yield strength of precipitation strengthening Ni-base superalloys
Weiguo Li et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2019)
A new CrFeNi2Al eutectic high entropy alloy system with excellent mechanical properties
Xi Jin et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2019)
CoCrFeMnNi high-entropy alloys reinforced with Laves phase by adding Nb and Ti elements
Gang Qin et al.
JOURNAL OF MATERIALS RESEARCH (2019)
Deformation mechanisms of nil temperature ductile polycrystalline B2 intermetallic compound YAg
Rolf Schaarschuch et al.
ACTA MATERIALIA (2018)
Transmission electron microscopy characterization of dislocation structure in a face-centered cubic high-entropy alloy Al0.1CoCrFeNi
X. D. Xu et al.
ACTA MATERIALIA (2018)
Alloying behaviour, thermal stability and phase evolution in quinary AlCoCrFeNi high entropy alloy
Vikas Shivam et al.
ADVANCED POWDER TECHNOLOGY (2018)
Mechano-chemical synthesis, thermal stability and phase evolution in AlCoCrFeNiMn high entropy alloy
Vikas Shivam et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2018)
Experimental and finite element simulation studies on hot deformation behaviour of AlCoCrFeNi2.1 eutectic high entropy alloy
M. R. Rahul et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2018)
A brief review of high-entropy films
Xue Hui Yan et al.
MATERIALS CHEMISTRY AND PHYSICS (2018)
Deformation mechanism during high-temperature tensile test in an eutectic high-entropy alloy AlCoCrFeNi2.1
Yaoli Zhang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
Microstructures and mechanical properties of the non-equiatomic FeMnNiCoCr high entropy alloy processed by differential speed rolling
H. T. Jeong et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
Effect of Al Addition on the Microstructural Evolution of Equiatomic CoCrFeMnNi Alloy
Jitesh Kumar et al.
TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS (2018)
A new strategy to design eutectic high-entropy alloys using mixing enthalpy
Yiping Lu et al.
INTERMETALLICS (2017)
The phase stability of equiatomic CoCrFeMnNi high-entropy alloy: Comparison between experiment and calculation results
Nokeun Park et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2017)
Effects of aluminum on microstructure and compressive properties of Al-Cr-Fe-Ni eutectic multi-component alloys
X. Chen et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
Deformation twinning behaviors of the low stacking fault energy high-entropy alloy: An in-situ TEM study
Jiabin Liu et al.
SCRIPTA MATERIALIA (2017)
Enhanced strength and ductility of bulk CoCrFeMnNi high entropy alloy having fully recrystallized ultrafine-grained structure
S. J. Sun et al.
MATERIALS & DESIGN (2017)
A critical review of high entropy alloys and related concepts
D. B. Miracle et al.
ACTA MATERIALIA (2017)
Designing eutectic high entropy alloys of CoCrFeNiNbX
Feng He et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2016)
Hot deformation behaviour and processing map of Co-Cu-Fe-Ni-Ti eutectic high entropy alloy
Sumanta Samal et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
Effect of annealing on mechanical properties of a nanocrystalline CoCrFeNiMn high-entropy alloy processed by high-pressure torsion
Hamed Shahmir et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
High-entropy alloy: challenges and prospects
Y. F. Ye et al.
MATERIALS TODAY (2016)
A review of dynamic recrystallization phenomena in metallic materials
K. Huang et al.
MATERIALS & DESIGN (2016)
Processing, alloy composition and phase transition effect on the mechanical and corrosion properties of high entropy alloys: a review
Kenneth Kanayo Alaneme et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2016)
Size effect, critical resolved shear stress, stacking fault energy, and solid solution strengthening in the CrMnFeCoNi high-entropy alloy
Norihiko L. Okamoto et al.
SCIENTIFIC REPORTS (2016)
Effects of Al addition on structural evolution and tensile properties of the FeCoNiCrMn high-entropy alloy system
J. Y. He et al.
ACTA MATERIALIA (2014)
Dynamic recrystallization behavior of a typical nickel-based superalloy during hot deformation
Xiao-Min Chen et al.
MATERIALS & DESIGN (2014)
Dynamic and post-dynamic recrystallization under hot, cold and severe plastic deformation conditions
Taku Sakai et al.
PROGRESS IN MATERIALS SCIENCE (2014)
A Promising New Class of High-Temperature Alloys: Eutectic High-Entropy Alloys
Yiping Lu et al.
SCIENTIFIC REPORTS (2014)
High-Entropy Alloys: A Critical Review
Ming-Hung Tsai et al.
MATERIALS RESEARCH LETTERS (2014)
The role of annealing twins during recrystallization of Cu
D. P. Field et al.
ACTA MATERIALIA (2007)
Microstructural development in equiatomic multicomponent alloys
B Cantor et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2004)
Dislocation densities and strain hardening rate in some intermetallic compounds
B Viguier
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2003)
Understanding creep - a review
W Blum et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2002)
An interdiffusion study of a NiAl alloy using single-phase diffusion couples
S Kim et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2000)