相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。Microstructural evolution and mechanical performance of in-situ TiB2/AlSi10Mg composite manufactured by selective laser melting
Yuxuan Liu et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2021)
Microstructure and mechanical properties of Al-12Si and Al-3.5Cu-1.5Mg-1Si bimetal fabricated by selective laser melting
P. Wang et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2020)
Comparative study of performance comparison of AlSi10Mg alloy prepared by selective laser melting and casting
Qian Yan et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2020)
Effects of the addition of silicon to 7075 aluminum alloy on microstructure, mechanical properties, and selective laser melting processability
Yuki Otani et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)
Microstructure evolution and mechanical property response via 3D printing parameter development of Al-Sc alloy
C. N. Kuo et al.
VIRTUAL AND PHYSICAL PROTOTYPING (2020)
Microstructures and mechanical properties of Si and Zr modified Al-Zn-Mg-Cu alloy-A comparison between selective laser melting and spark plasma sintering
Lanbo Li et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2020)
Post heat treatment of additive manufactured AlSi10Mg: On silicon morphology, texture and small-scale properties
F. Alghamdi et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)
Developing a high-strength Al-Mg-Si-Sc-Zr alloy for selective laser melting: Crack-inhibiting and multiple strengthening mechanisms
Ruidi Li et al.
ACTA MATERIALIA (2020)
Manipulating the microstructure and tensile properties of selective laser melted Al–Mg-Sc-Zr alloy through heat treatment
Rulong Ma et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2020)
Inoculation treatment of an additively manufactured 2024 aluminium alloy with titanium nanoparticles
Qiyang Tan et al.
ACTA MATERIALIA (2020)
Microstructure, metallurgical defects and hardness of Al-Cu-Mg-Li-Zr alloy additively manufactured by selective laser melting
Rong Xu et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2020)
Effect of post-process heat treatment on microstructure and properties of selective laser melted AlSi10Mg alloy
Longchao Zhuo et al.
MATERIALS LETTERS (2019)
Multiple precipitation pathways in an Al-7Si-0.6Mg alloy fabricated by selective laser melting
Jeremy H. Rao et al.
SCRIPTA MATERIALIA (2019)
3D printing of Aluminium alloys: Additive Manufacturing of Aluminium alloys using selective laser melting
Nesma T. Aboulkhair et al.
PROGRESS IN MATERIALS SCIENCE (2019)
Damage mechanisms in selective laser melted AlSi10Mg under as built and different post-treatment conditions
Lv Zhao et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Selective laser melted Al-7Si-0.6Mg alloy with in-situ precipitation via platform heating for residual strain removal
Jeremy H. Rao et al.
MATERIALS & DESIGN (2019)
Effects of annealing on the microstructure and mechanical properties of selective laser melted AlSi7Mg alloy
Min Wang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Effect of heat treatments on fatigue property of selective laser melting AlSi10Mg
Changchun Zhang et al.
INTERNATIONAL JOURNAL OF FATIGUE (2018)
Changes in the microstructure and mechanical properties of additively manufactured AlSi10Mg alloy after exposure to elevated temperatures
Michaela Fousova et al.
MATERIALS CHARACTERIZATION (2018)
Heat treatment effect on the mechanical properties and fracture mechanism in AlSi10Mg fabricated by additive manufacturing selective laser melting process
I Rosenthal et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
Heat-induced molten pool boundary softening behavior and its effect on tensile properties of laser additive manufactured aluminum alloy
Donghua Dai et al.
VACUUM (2018)
On the fatigue strength enhancement of additive manufactured AlSi10Mg parts by mechanical and thermal post-processing
Sara Bagherifard et al.
MATERIALS & DESIGN (2018)
Effect of heat treatment on the microstructure and anisotropy in mechanical properties of A357 alloy produced by selective laser melting
Kun V. Yang et al.
MATERIALS & DESIGN (2018)
SLM-processed Sc- and Zr- modified Al-Mg alloy: Mechanical properties and microstructural effects of heat treatment
A. B. Spierings et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
Change in microstructure of selectively laser melted AlSi10Mg alloy with heat treatments
Naoki Takata et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
Fatigue of AlSi10Mg specimens fabricated by additive manufacturing selective laser melting (AM-SLM)
Naor Elad Uzan et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
Towards strength-ductility synergy through the design of heterogeneous nanostructures in metals
Evan Ma et al.
MATERIALS TODAY (2017)
3D printing of high-strength aluminium alloys
John H. Martin et al.
NATURE (2017)
Selective laser melting of a novel Sc and Zr modified Al-6.2 Mg alloy: Processing, microstructure, and properties
Ruidi Li et al.
POWDER TECHNOLOGY (2017)
Strength and strain hardening of a selective laser melted AlSi10Mg alloy
B. Chen et al.
SCRIPTA MATERIALIA (2017)
Heat transfer and fluid flow of molten pool during selective laser melting of AlSi10Mg powder: Simulation and experiment
Xueping Ding et al.
JOURNAL OF MANUFACTURING PROCESSES (2017)
Thermodynamic description of the quaternary Al-Si-Mg-Sc system and its application to the design of novel Sc-additional A356 alloys
Zhao Lu et al.
MATERIALS & DESIGN (2017)
The AlSi10Mg samples produced by selective laser melting: single track, densification, microstructure and mechanical behavior
Wei Pei et al.
APPLIED SURFACE SCIENCE (2017)
Microstructure and strength of selectively laser melted AlSi10Mg
J. Wu et al.
ACTA MATERIALIA (2016)
Metal Additive Manufacturing: A Review of Mechanical Properties
John J. Lewandowski et al.
ANNUAL REVIEW OF MATERIALS RESEARCH, VOL 46 (2016)
Characterization of an Aluminum Alloy Hemispherical Shell Fabricated via Direct Metal Laser Melting
T. G. Holesinger et al.
JOM (2016)
Effect of heat treatment on AlSi10Mg alloy fabricated by selective laser melting: Microstructure evolution, mechanical properties and fracture mechanism
Wei Li et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
Selective laser melting of high strength Al-Cu-Mg alloys: Processing, microstructure and mechanical properties
Hu Zhang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
Accurately measured precipitate-matrix misfit in an Al-Mg-Si alloy by electron microscopy
Sigurd Wenner et al.
SCRIPTA MATERIALIA (2016)
The influence of processing parameters on aluminium alloy A357 manufactured by Selective Laser Melting
Heng Rao et al.
MATERIALS & DESIGN (2016)
Microstructures and mechanical properties of A356 (AlSi7Mg0.3) aluminum alloy fabricated by selective laser melting
Takahiro Kimura et al.
MATERIALS & DESIGN (2016)
Study of precipitation in Al-Mg-Si Alloys by atom probe tomography II. Influence of Cu additions
M. W. Zandbergen et al.
ACTA MATERIALIA (2015)
A modified Johnson-Cook model of dynamic tensile behaviors for 7075-T6 aluminum alloy
Ding-Ni Zhang et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2015)
A review on selective laser sintering/melting (SLS/SLM) of aluminium alloy powders: Processing, microstructure, and properties
E. O. Olakanmi et al.
PROGRESS IN MATERIALS SCIENCE (2015)
Fine-structured aluminium products with controllable texture by selective laser melting of pre-alloyed AlSi10Mg powder
Lore Thijs et al.
ACTA MATERIALIA (2013)
Strengthening mechanisms in solid solution aluminum alloys
Oyvind Ryen et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2006)
Classification of bulk metallic glasses by atomic size difference, heat of mixing and period of constituent elements and its application to characterization of the main alloying element
A Takeuchi et al.
MATERIALS TRANSACTIONS (2005)