期刊
JOURNAL OF ALLOYS AND COMPOUNDS
卷 873, 期 -, 页码 -出版社
ELSEVIER SCIENCE SA
DOI: 10.1016/j.jallcom.2021.159791
关键词
LPBF; Additive manufacturing; Shape memory alloy; Thermomechanical behavior; Build orientation; Texture
资金
- Ohio Federal Research Network
- NASA Glenn Research Center
This study investigates the microstructure and shape memory properties of laser powder bed fusion NiTi parts fabricated in different building orientations. The research reveals that different orientations lead to anisotropic compression-tension behaviors, with texture variations impacting the mechanical performance of the samples.
This study is the first study on the compressive and tensile stress-strain revealing the deformation anisotropy among laser powder bed fusion NiTi parts fabricated with the same process conditions. We investigated the effects of building orientation on the microstructure and the resulting shape memory properties. To this end, three orientations were selected, namely 0, 45, and 90-degree, measured from the build plate and fabricated with the same process parameters. A strong (001) texture was formed along the building direction for all of the samples; a different texture could however be observed along the loading direction (LD). Samples fabricated with 45-degree showed a texture of (110) along the LD, as confirmed through X-ray diffraction and backscattered diffraction while 0 and 90 samples still had the (001) texture along with the LD. These texture variations created anisotropic compression-tension behaviors with deformation patterns consistent with single crystals. The (001) -textured parts showed higher strength and lower transformation strain (2.87% @ 200 MPa in tension for 0 degrees) while the (110) samples showed higher transformation strain at lower stresses (5.31% @ 150 MPa in tension for 45 degrees). (c) 2021 Elsevier B.V. All rights reserved.
作者
我是这篇论文的作者
点击您的名字以认领此论文并将其添加到您的个人资料中。
推荐
暂无数据