相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。Multi-material adhesive joints with thick bond-lines: Crack onset and crack deflection
Romina Lopes Fernandes et al.
COMPOSITE STRUCTURES (2021)
Tension-tension fatigue behavior of hybrid glass/carbon and carbon/carbon composites
Filipe Ribeiro et al.
INTERNATIONAL JOURNAL OF FATIGUE (2021)
Using acoustic emissions (AE) to monitor mode I crack growth in bonded joints
J. Manterola et al.
ENGINEERING FRACTURE MECHANICS (2020)
A review of failure modes, condition monitoring and fault diagnosis methods for large-scale wind turbine bearings
Zepeng Liu et al.
MEASUREMENT (2020)
Automated monitoring of the crack propagation in mode I testing of thermoplastic composites by means of digital image correlation
A. Khudiakova et al.
POLYMER TESTING (2020)
Mixed mode I/III fracture behavior of adhesive joints
A. Akhavan-Safar et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2020)
Mode-I behavior of adhesively bonded composite joints at high loading rates
Suraj Ravindran et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2020)
Durability study of flexible bonded joints: The effect of sustained loads in mode I fracture tests
J. Manterola et al.
POLYMER TESTING (2020)
Review on Adhesives and Surface Treatments for Structural Applications: Recent Developments on Sustainability and Implementation for Metal and Composite Substrates
Ana C. Marques et al.
MATERIALS (2020)
Role of adherend material on the fracture of bi-material composite bonded joints
Romina Lopes Fernandes et al.
COMPOSITE STRUCTURES (2020)
Analysis of the fracture process zone and effective crack length in the adhesively bonded end-notched flexure specimen
A. B. de Morais
JOURNAL OF ADHESION (2019)
A novel experimental methodology to identify fracture envelopes and cohesive laws in mixed-mode I plus III
Lukas Loh et al.
ENGINEERING FRACTURE MECHANICS (2019)
Influence of Surface Preparation Method on the Bond Behavior of Externally Bonded CFRP Reinforcements in Concrete
Sergio Soares et al.
MATERIALS (2019)
Customized shear test for bond-slip characterization of EBR FRP-concrete system: Influence of substrate aggregate type
Faisal M. Mukhtar
COMPOSITES PART B-ENGINEERING (2019)
Review on adhesive joints and their application in hybrid composite structures
G. Jeevi et al.
JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY (2019)
Experimental characterization of delamination in off-axis GFRP laminates during mode I loading
Esben Lindgaard et al.
COMPOSITE STRUCTURES (2019)
Enhanced simple beam theory for characterising mode-I fracture resistance via a double cantilever beam test
Leo Skec et al.
COMPOSITES PART B-ENGINEERING (2019)
Fracture and mode mixity analysis of shear deformable composite beams
Balazs Kiss et al.
ARCHIVE OF APPLIED MECHANICS (2019)
From thin to extra-thick adhesive layer thicknesses: Fracture of bonded joints under mode I loading conditions
Romina Lopes Fernandes et al.
ENGINEERING FRACTURE MECHANICS (2019)
Tensile fracture of an adhesive joint: the role of crack length and of material mismatch
F. Van Loock et al.
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2019)
Influence of working temperatures on mechanical behavior of hybrid joints with carbon fiber reinforced plastic/aluminum lightweight materials for automotive structure
Yiwei Chen et al.
JOURNAL OF MANUFACTURING PROCESSES (2019)
Effect of surface pre-treatment on the behaviour of adhesively-bonded CFRP T-joints
Joao Cardoso et al.
ENGINEERING FAILURE ANALYSIS (2019)
Enhancement of Polyvinyl Acetate (PVAc) Adhesion Performance by SiO2 and TiO2 Nanoparticles
Gorana Petkovic et al.
COATINGS (2019)
Investigations on a material-specific joining technology for CFRP hybrid joints along the automotive process chain
Julian Vorderbrueggen et al.
COMPOSITE STRUCTURES (2019)
A critical review and assessment for FRP-concrete bond systems with epoxy resin exposed to chloride environments
Jianglin Li et al.
COMPOSITE STRUCTURES (2019)
Strain-based methodology for mixed-mode I plus II fracture: A new partitioning method for bi-material adhesively bonded joints
Marcio Moreira Arouche et al.
JOURNAL OF ADHESION (2019)
Experimental investigation and numerical modelling of the mechanical response of a semi-structural polyurethane adhesive
John Fredrick Berntsen et al.
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2019)
Metallic multi-material adhesive joint testing and modeling for vehicle lightweighting
Brock Watson et al.
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2019)
Effect of thermal cycling on the degradation of adhesively bonded CFRP/aluminum alloy joints for automobiles
Guofeng Qin et al.
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2019)
The Methacrylate Adhesive to Double-Lap Shear Joints Made of High-Strength Steel-Experimental Study
Marta Kaluza et al.
MATERIALS (2019)
Sub-components of Wind Turbine Blades: Proof of a Novel Trailing Edge Testing Concept
Malo Rosemeier et al.
MECHANICS OF COMPOSITE, HYBRID AND MULTIFUNCTIONAL MATERIALS, VOL 5 (2019)
Comparison between the ENF and 4ENF fracture characterization tests to evaluate GIIC of bonded aluminium joints
B. M. A. de Oliveira et al.
JOURNAL OF ADHESION (2018)
Numerical assessment of the Double-Cantilever Beam and Tapered Double-Cantilever Beam tests for the GIC determination of adhesive layers
J. M. D. Teixeira et al.
JOURNAL OF ADHESION (2018)
Adhesives and adhesive joints under impact loadings: An overview
J. J. M. Machado et al.
JOURNAL OF ADHESION (2018)
Strength estimation of hybrid single-L bonded joints by the eXtended Finite Element Method
J. T. S. Xara et al.
COMPOSITE STRUCTURES (2018)
Experimental and numerical studies on the buckling and post-buckling behavior of single blade-stiffened CFRP panels
Naresh Reddy Kolanu et al.
COMPOSITE STRUCTURES (2018)
Effect of engineered cementitious composite on the bond behavior between fiber-reinforced polymer and concrete
Lili Sui et al.
COMPOSITE STRUCTURES (2018)
Parametric study of size, curvature and free edge effects on the predicted strength of bonded composite joints
Yiding Liu et al.
COMPOSITE STRUCTURES (2018)
Guidelines for selecting the dimensions of adhesively bonded end-loaded split joints: An approach based on numerical cohesive zone length
M. Toolabi et al.
ENGINEERING FRACTURE MECHANICS (2018)
An Out-of-plane Loaded Double Cantilever Beam (ODCB) test to measure the critical energy release rate in mode III of adhesive joints
Lukas Loh et al.
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2018)
Mechanical properties of joints in 5052 aluminum made with adhesive bonding and mechanical fasteners
B. Ufferman et al.
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2018)
Fatigue damage in angle-ply GFRP laminates under tension-tension fatigue
A. Vahid Movahedi-Rad et al.
INTERNATIONAL JOURNAL OF FATIGUE (2018)
Interrupted tension-tension fatigue behavior of angle-ply GFRP composite laminates
A. Vahid Movahedi-Rad et al.
INTERNATIONAL JOURNAL OF FATIGUE (2018)
Inverse end-loaded-split test analysis effect of small scale yielding
J. Jumel et al.
THEORETICAL AND APPLIED FRACTURE MECHANICS (2018)
How pure mode I can be obtained in bi-material bonded DCB joints: A longitudinal strain-based criterion
Wandong Wang et al.
COMPOSITES PART B-ENGINEERING (2018)
Mixed-mode crack propagation tests of composite bonded joints using a dual-actuator load frame - Constant and variable GII/GI conditions
Enrico Panettieri et al.
ENGINEERING FRACTURE MECHANICS (2018)
Parametric study of non flat interface adhesively bonded joint
P. R. Jaiswal et al.
MATERIALS TODAY-PROCEEDINGS (2018)
Influence of Mechanical surface treatment on the strength of mixed adhesive joint
Nitesh. S. Hirulkar et al.
MATERIALS TODAY-PROCEEDINGS (2018)
Influence of mechanical surface treatment on fatigue life of bonded joints
S. de Barros et al.
JOURNAL OF ADHESION (2017)
Experiment and finite element simulation of high strength steel adhesive joint reinforced by rivet for automotive applications
Li Yao et al.
JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY (2017)
Crack front morphology near the free edges in double and single cantilever beam fracture experiments
Alex Moberg et al.
ENGINEERING FRACTURE MECHANICS (2017)
Fatigue performance of a cold-curing structural epoxy adhesive subjected to moist environments
Maria Savvilotidou et al.
INTERNATIONAL JOURNAL OF FATIGUE (2017)
Experimental identification of static and dynamic strength of epoxy based adhesives in high thickness joints
Garbine Fernandez et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2017)
Analysis of adhesively-bonded T-joints by experimentation and cohesive zone models
M. A. S. Carneiro et al.
JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY (2017)
Materials for Wind Turbine Blades: An Overview
Leon Mishnaevsky et al.
MATERIALS (2017)
Perspective for Fibre-Hybrid Composites in Wind Energy Applications
Yentl Swolfs
MATERIALS (2017)
Study of the behaviour of adhesive joints of steel with CFRP for its application in bus structures
Pedro Galvez et al.
COMPOSITES PART B-ENGINEERING (2017)
Toughening of Epoxy Adhesives by Combined Interaction of Carbon Nanotubes and Silsesquioxanes
Giuseppina Barra et al.
MATERIALS (2017)
Strengthening of shear-critical RC beams: Alternatives to externally bonded CFRP sheets
Rizwan Azam et al.
CONSTRUCTION AND BUILDING MATERIALS (2017)
Numerical analysis of glass-FRP post-tensioned beams - Review and assessment
Chiara Bedon et al.
COMPOSITE STRUCTURES (2017)
Experimental failure investigation of pull-off tests of single T-stiffened composite specimens
J. Justo et al.
COMPOSITE STRUCTURES (2017)
Dynamic behaviour of composite adhesive joints for the automotive industry
H. A. M. Araujo et al.
COMPOSITE STRUCTURES (2017)
Investigation of mode III fracture behaviour in bonded pultruded GFRP composite joints
G. Cricri et al.
COMPOSITES PART B-ENGINEERING (2017)
Failure analysis of adhesively-bonded metal-skin-to-composite-stiffener: Effect of temperature and cyclic loading
Sofia Teixeira de Freitas et al.
COMPOSITE STRUCTURES (2017)
Numerical simulation of the flexural behaviour of composite glass-GFRP beams using smeared crack models
Luis Valarinho et al.
COMPOSITES PART B-ENGINEERING (2017)
Static and cyclic strength properties of brittle adhesives with porosity
G. Fernandez et al.
3RD INTERNATIONAL SYMPOSIUM ON FATIGUE DESIGN AND MATERIAL DEFECTS (FDMD 2017) (2017)
Numerical Modeling of Hybrid-bonded Joints
H. Fricke et al.
JOURNAL OF ADHESION (2016)
Influence of Temperature on the Fatigue Behaviour of a Toughened Epoxy Adhesive
V. C. Beber et al.
JOURNAL OF ADHESION (2016)
An experimental analysis of the fracture behavior of composite bonded joints in terms of cohesive laws
Carlos Sarrado et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2016)
A data reduction method based on the J-integral to obtain the interlaminar fracture toughness in a mode II end-loaded split (ELS) test
M. Perez-Galmes et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2016)
Damage tolerance of composite runout panels under tensile loading
J. Reinoso et al.
COMPOSITES PART B-ENGINEERING (2016)
Experimental and numerical analysis on the strength of 2060 Al-Li alloy adhesively bonded T joints
Xiaohong Zhan et al.
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2016)
Experimental and numerical failure analysis of aluminium/composite single-L joints
N. R. E. Domingues et al.
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2016)
Evaluation of crack-tip fields from DIC data: A parametric study
M. Mokhtarishirazabad et al.
INTERNATIONAL JOURNAL OF FATIGUE (2016)
Mechanical behaviour of thick structural adhesives in wind turbine blades under multi-axial loading
Dimitrios Zarouchas et al.
JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY (2016)
Bond of NSM FRP-Strengthened Concrete: Round Robin Test Initiative
Antonio Bilotta et al.
JOURNAL OF COMPOSITES FOR CONSTRUCTION (2016)
Effect of laser ablation surface treatment on performance of adhesive-bonded aluminum alloys
Yongrong Wu et al.
SURFACE & COATINGS TECHNOLOGY (2016)
Behaviour under Impact of Mixed Adhesive Joints for the Automotive Industry
M. R. G. Silva et al.
LATIN AMERICAN JOURNAL OF SOLIDS AND STRUCTURES (2016)
NSM Systems
Jose Sena-Cruz et al.
DESIGN PROCEDURES FOR THE USE OF COMPOSITES IN STRENGTHENING OF REINFORCED CONCRETE STRUCTURES: STATE-OF-THE-ART REPORT OF THE RILEM TECHNICAL COMMITTEE 234-DUC (2016)
Fatigue analysis of adhesive joints with laser treated substrates
Fabrizio Moroni et al.
21ST EUROPEAN CONFERENCE ON FRACTURE, (ECF21) (2016)
Mode-I, mode-II and mixed-mode I plus II fracture behavior of composite bonded joints: Experimental characterization and numerical simulation
I. S. Floros et al.
COMPOSITES PART B-ENGINEERING (2015)
Flexural performance of hybrid beams made of glass and pultruded GFRP
E. Speranzini et al.
CONSTRUCTION AND BUILDING MATERIALS (2015)
Failure of adhesively bonded metallic T-joints subjected to quasi-static and crash loading
Michael May et al.
ENGINEERING FAILURE ANALYSIS (2015)
Failure analysis of adhesively-bonded skin-to-stiffener joints: Metal-metal vs. composite-metal
Sofia Teixeira de Freitas et al.
ENGINEERING FAILURE ANALYSIS (2015)
A novel fixture for measuring mode III toughness of bonded assemblies
Gabriele Cricri et al.
ENGINEERING FRACTURE MECHANICS (2015)
Development of single cantilever beam method to measure the adhesion of thin film adhesive on silicon chip
DongKil Shin et al.
ENGINEERING FRACTURE MECHANICS (2015)
Effect of curved delamination front on mode-I fracture toughness of adhesively bonded joints
Zhengwen Jiang et al.
ENGINEERING FRACTURE MECHANICS (2015)
Behavior of adhesively bonded coated steel for automotive applications under impact loads
M. Schiel et al.
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2015)
Flexible adhesives for automotive application under impact loading
Ferhat Kadioglu et al.
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2015)
Experimental study of cohesive strain prior to crack initiation in constant force single cantilever beam test
Wulff Possart et al.
JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY (2015)
Quality assurance concepts for adhesive bonding of composite aircraft structures - characterisation of adherent surfaces by extended NDT
Christian Tornow et al.
JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY (2015)
Damage tolerance and structural monitoring for wind turbine blades
M. McGugan et al.
PHILOSOPHICAL TRANSACTIONS OF THE ROYAL SOCIETY A-MATHEMATICAL PHYSICAL AND ENGINEERING SCIENCES (2015)
Monitoring strain gradients in adhesive composite joints by embedded fiber Bragg grating sensors
Luis P. Canal et al.
COMPOSITE STRUCTURES (2014)
Preliminary failure investigation of a 52.3 m glass/epoxy composite wind turbine blade
Xiao Chen et al.
ENGINEERING FAILURE ANALYSIS (2014)
Mixed-Mode I/II fracture behavior of asymmetric adhesively-bonded pultruded composite joints
Moslem Shahverdi et al.
ENGINEERING FRACTURE MECHANICS (2014)
A tapered bondline thickness double cantilever beam (DCB) specimen geometry for combinatorial fracture studies of adhesive bonds
Shantanu R. Ranade et al.
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2014)
Experimental and theoretical stress analysis for an interface stress model of single-L adhesive joints between CFRP and aluminum components
Kaifu Zhang et al.
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2014)
The strength of the adhesively bonded T-joints with embedded supports
Murat Demir Aydin et al.
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2014)
Comparison of Cyclic and Monotonic Loading of a Double Cantilever Beam Adhesion Test
Michal K. Budzik et al.
JOURNAL OF ADHESION (2014)
Fracture Mechanics Tests in Adhesively Bonded Joints: A Literature Review
Filipe J. P. Chaves et al.
JOURNAL OF ADHESION (2014)
Adhesion Properties of Bonded Composite-to-Aluminium Joints Using Peel Tests
Sofia Teixeira de Freitas et al.
JOURNAL OF ADHESION (2014)
Innovative and Highly Productive Joining Technologies for Multi-Material Lightweight Car Body Structures
G. Meschut et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2014)
Manufacturing Aspects of Advanced Polymer Composites for Automotive Applications
Klaus Friedrich et al.
APPLIED COMPOSITE MATERIALS (2013)
A study on 3-D stress distributions in the bi-adhesively bonded T-joints
Salih Akpinar et al.
APPLIED MATHEMATICAL MODELLING (2013)
A composite runout specimen subjected to tension-compression loading conditions: Experimental and global-local finite element analysis
J. Reinoso et al.
COMPOSITE STRUCTURES (2013)
Application of digital image correlation in investigating the bond between FRP and masonry
Bahman Ghiassi et al.
COMPOSITE STRUCTURES (2013)
Wind blade joints based on non-crimp 3D orthogonal woven Pi shaped preforms
Keith Sharp et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2013)
Bond between glulam and NSM CFRP laminates
Jose Sena-Cruz et al.
CONSTRUCTION AND BUILDING MATERIALS (2013)
Viscoelastic foundation analysis of Single Cantilevered Beam (SCB) test under stationary loading
Julien Jumel et al.
EUROPEAN JOURNAL OF MECHANICS A-SOLIDS (2013)
Durability of adhesively-bonded single lap-shear joints in accelerated hygrothermal exposure for automotive applications
Fan Zhang et al.
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2013)
Effects of adherend thickness and taper on adhesive bond strength measured by portable pull-off tests
Mildred Lee et al.
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2013)
Stress distribution in adhesively-bonded joints and the loading capacity of hybrid joints of car body steels for the automotive industry
Bartosz Bartczak et al.
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2013)
Characterising the behaviour of composite single lap bonded joints using digital image correlation
A. J. Comer et al.
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2013)
Analysis of the mechanical performance of hybrid (SPR/bonded) single-lap joints between CFRP panels and aluminum blanks
G. Di Franco et al.
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2013)
Evaluation of kissing bond in composite adhesive lap joints using digital image correlation: Preliminary studies
R. L. Vijaya Kumar et al.
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2013)
Variable amplitude fatigue of adhesively-bonded pultruded GFRP joints
Roohollah Sarfaraz et al.
INTERNATIONAL JOURNAL OF FATIGUE (2013)
Instrumented end notched flexure - Crack propagation and process zone monitoring Part II: Data reduction and experimental
M. K. Budzik et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2013)
Mode II fracture energy in the adhesive bonding of dissimilar substrates: carbon fibre composite to aluminium joints
Cristina Alia et al.
JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY (2013)
A review on FRP composites applications and durability concerns in the construction sector
Asifuz Zaman et al.
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2013)
An enhanced beam-theory model of the mixed-mode bending (MMB) test-Part I: Literature review and mechanical model
Stefano Bennati et al.
MECCANICA (2013)
An enhanced beam-theory model of the mixed-mode bending (MMB) test-Part II: Applications and results
Stefano Bennati et al.
MECCANICA (2013)
Deflection estimation of a wind turbine blade using FBG sensors embedded in the blade bonding line
Sang-Woo Kim et al.
SMART MATERIALS AND STRUCTURES (2013)
Critical Analysis of Fibre-Reinforced Polymer Near-Surface Mounted Double-shear Pull-out Tests
I. Costa et al.
STRAIN (2013)
Use of renewable energy sources in light of the New Energy Strategy for Europe 2011-2020
Karoly Nagy et al.
APPLIED ENERGY (2012)
Postbuckling behaviour of a pressurized stiffened composite panel - Part I: Experimental study
J. Reinoso et al.
COMPOSITE STRUCTURES (2012)
Investigation of failure mechanisms in GFRP sandwich structures with face sheet wrinkle defects used for wind turbine blades
Martin Leong et al.
COMPOSITE STRUCTURES (2012)
A total fatigue life model for the prediction of the R-ratio effects on fatigue crack growth of adhesively-bonded pultruded GFRP DCB joints
Moslem Shahverdi et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2012)
Experimental investigation of R-ratio effects on fatigue crack growth of adhesively-bonded pultruded GFRP DCB joints under CA loading
Moslem Shahverdi et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2012)
Experimental and three-dimensional global-local finite element analysis of a composite component including degradation process at the interfaces
J. Reinoso et al.
COMPOSITES PART B-ENGINEERING (2012)
Investigations on the mechanical behavior of a wind rotor blade subcomponent
D. S. Zarouchas et al.
COMPOSITES PART B-ENGINEERING (2012)
Bond behavior between glulam and GFRP's by pullout tests
Jose Sena-Cruz et al.
COMPOSITES PART B-ENGINEERING (2012)
Analysis of solid wood beams strengthened with CFRP laminates of distinct lengths
Abilio M. P. de Jesus et al.
CONSTRUCTION AND BUILDING MATERIALS (2012)
Stability of beam-like fracture mechanics specimens
K. S. Alfredsson et al.
ENGINEERING FRACTURE MECHANICS (2012)
Review of fracture toughness (G, K, J, CTOD, CTOA) testing and standardization
Xian-Kui Zhu et al.
ENGINEERING FRACTURE MECHANICS (2012)
Investigation of structural bond lines in wind turbine blades by sub-component tests
Florian Sayer et al.
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2012)
Experimental investigation and modeling of mean load effect on fatigue behavior of adhesively-bonded pultruded GFRP joints
Roohollah Sarfaraz et al.
INTERNATIONAL JOURNAL OF FATIGUE (2012)
The fracture behaviour of adhesively-bonded composite joints: Effects of rate of test and mode of loading
B. R. K. Blackman et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2012)
Rapid Strengthening of Masonry Structures Cracked in Earthquakes Using Fiber Composite Materials
Xianglin Gu et al.
JOURNAL OF COMPOSITES FOR CONSTRUCTION (2012)
Effect of the Surface Preparation on PP Reinforced Glass Fiber Adhesive Lap Joints Strength
P. N. B. Reis et al.
JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS (2012)
On the interfacial constitutive laws of mixed mode fracture with various adhesive thicknesses
Gefu Ji et al.
MECHANICS OF MATERIALS (2012)
Bond Analysis of Timber Structures Strengthened with FRP Systems
L. F. P. Juvandes et al.
STRAIN (2012)
INDUCTION-EXCITED THERMOGRAPHY - A METHOD TO VISUALIZE DEFECTS IN SEMI-STRUCTURAL ADHESIVE BONDS OF CAR BODY STRUCTURES
C. Srajbr et al.
WELDING IN THE WORLD (2012)
Numerical analysis and experiment of composite sandwich T-joints subjected to pulling load
S. Guo et al.
COMPOSITE STRUCTURES (2011)
Design and analysis of a new six-point edge crack torsion (6ECT) specimen for mode III interlaminar fracture characterisation
A. B. Pereira et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2011)
Mixed-mode I-II-III delamination toughness determination via a shear-torsion-bending test
Barry D. Davidson et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2011)
A phenomenological analysis of Mode I fracture of adhesively-bonded pultruded GFRP joints
Moslem Shahverdi et al.
ENGINEERING FRACTURE MECHANICS (2011)
Design of composite stiffener run-outs for damage tolerance
S. Psarras et al.
FINITE ELEMENTS IN ANALYSIS AND DESIGN (2011)
Mixed-mode fatigue behavior of degraded toughened epoxy adhesive joints
N. V. Datla et al.
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2011)
Experimental investigation of the fatigue behavior of adhesively-bonded pultruded GFRP joints under different load ratios
Roohollah Sarfaraz et al.
INTERNATIONAL JOURNAL OF FATIGUE (2011)
An in situ technique for the assessment of adhesive properties of a joint under load
M. K. Budzik et al.
INTERNATIONAL JOURNAL OF FRACTURE (2011)
Investigating the Thin-Film Versus Bulk Material Properties of Structural Adhesives
Nicholas Burst et al.
JOURNAL OF ADHESION (2011)
Effect of Adhesive Compliance in the Assessment of Soft Adhesives with the Wedge Test
M. Budzik et al.
JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY (2011)
Sizing a single cantilever beam specimen for characterizing facesheet-core debonding in sandwich structure
James G. Ratcliffe et al.
JOURNAL OF COMPOSITE MATERIALS (2011)
Process zone in the Single Cantilever Beam under transverse loading - Part II: Experimental
M. K. Budzik et al.
THEORETICAL AND APPLIED FRACTURE MECHANICS (2011)
Evaluating the strengths of thick aluminum-to-aluminum joints with different adhesive lengths and thicknesses
Jae-Hyun Park et al.
COMPOSITE STRUCTURES (2010)
A generalised damage model for constant amplitude fatigue loading of adhesively bonded joints
H. Khoramishad et al.
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2010)
Optimum adhesive thickness in structural adhesives joints using statistical techniques based on Weibull distribution
Jose M. Arenas et al.
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2010)
The use of power ultrasound energy to support interface formation for structural adhesive bonding
J. Holtmannspoetter et al.
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2010)
Fracture of adhesively-bonded pultruded GFRP joints under constant amplitude fatigue loading
Ye Zhang et al.
INTERNATIONAL JOURNAL OF FATIGUE (2010)
Mode II Fracture Toughness of a Brittle and a Ductile Adhesive as a Function of the Adhesive Thickness
Lucas F. M. da Silva et al.
JOURNAL OF ADHESION (2010)
Evaluation of Fatigue Damage in Adhesive Bonding: Part 1: Bulk Adhesive
M. M. Abdel Wahab et al.
JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY (2010)
A comparison of the mechanical behaviour of self-piercing riveted and resistance spot welded aluminium sheets for the automotive industry
L. Han et al.
MATERIALS & DESIGN (2010)
Environmental effects on fatigue behavior of adhesively-bonded pultruded structural joints
Ye Zhang et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2009)
The fracture behaviour of structural adhesives under high rates of testing
B. R. K. Blackman et al.
ENGINEERING FRACTURE MECHANICS (2009)
Influence of adhesive bond line thickness on joint strength
P. Davies et al.
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2009)
Experimental and numerical analysis of single-lap joints for the automotive industry
L. D. R. Grant et al.
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2009)
The relative merits of the Boeing wedge test and the double cantilever beam test for assessing the durability of adhesively bonded joints, with particular reference to the use of fracture mechanics
R. D. Adams et al.
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2009)
Damage tolerance of bonded aircraft structures
R. C. Alderliesten
INTERNATIONAL JOURNAL OF FATIGUE (2009)
Improved analysis of the modified split-cantilever beam for mode-III fracture
Andras Szekrenyes
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2009)
Pure mode II fracture characterization of composite bonded joints
M. F. S. F. de Moura et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2009)
Observations of Decreased Fracture Toughness for Mixed Mode Fracture Testing of Adhesively Bonded Joints
David A. Dillard et al.
JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY (2009)
The Influence of Loading Rate on the Mode III Fracture Properties of Adhesively Bonded Composites
D. Pennas et al.
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2009)
Adhesively bonded joints in composite materials: an overview
M. D. Banea et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART L-JOURNAL OF MATERIALS-DESIGN AND APPLICATIONS (2009)
Mixed mode II+III interlaminar fracture of carbon/epoxy laminates
A. B. de Morais et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2008)
A modified DCB sandwich specimen for measuring mixed-mode cohesive laws
Christian Lundsgaard-Larsen et al.
ENGINEERING FRACTURE MECHANICS (2008)
A status report on delamination resistance testing of polymer-matrix composites
A. J. Brunner et al.
ENGINEERING FRACTURE MECHANICS (2008)
The influence of bond line thickness and peel arm thickness on adhesive fracture toughness of rubber toughened epoxy-aluminium alloy laminates
L. F. Kawashita et al.
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2008)
Fibre Bragg gratings in structural health monitoring - Present status and applications
Mousumi Majumder et al.
SENSORS AND ACTUATORS A-PHYSICAL (2008)
Analysis of composite skin-stiffener debond specimens using a shell/3D modeling technique
Ronald Krueger et al.
COMPOSITE STRUCTURES (2007)
Delamination fracture analysis in the GII-GIII plane using prestressed transparent composite beams
Andras Szekrenyes
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2007)
Effect of compressive transverse normal stress on mode II fracture toughness in polymeric composites
Qida Bing et al.
INTERNATIONAL JOURNAL OF FRACTURE (2007)
Experimental measurements of the strain energy release rate for stiction-failed microcantilevers using a single-cantilever beam peel test
Zayd C. Leseman et al.
JOURNAL OF MICROELECTROMECHANICAL SYSTEMS (2007)
Glulam members strengthened by carbon fibre reinforcement
H. Johnsson et al.
MATERIALS AND STRUCTURES (2007)
Mode II fracture testing of composites: a new look at an old problem
B. R. K. Blackman et al.
ENGINEERING FRACTURE MECHANICS (2006)
Effect of adhesive type and thickness on the lap shear strength
Lucas F. M. da Silva et al.
JOURNAL OF ADHESION (2006)
DCB-specimen loaded with uneven bending moments
Bent F. Sorensen et al.
INTERNATIONAL JOURNAL OF FRACTURE (2006)
Stress singularities resulting from various boundary conditions in angular corners of plates of arbitrary thickness in extension
Andrei Kotousov et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2006)
The root rotation in double cantilever beam and peel tests
B Cotterell et al.
MECHANICS OF MATERIALS (2006)
Buckling and postbuckling of stringer stiffened fibre composite curved panels - Tests and computations
R Zimmermann et al.
COMPOSITE STRUCTURES (2006)
Digital image correlation: from displacement measurement to identification of elastic properties - a review
F Hild et al.
STRAIN (2006)
Modelling single and double-lap repairs on composite materials
RDSG Campilho et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2005)
Constraint effects in adhesive joint fracture
T Pardoen et al.
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2005)
Durability studies for aerospace applications using peel and wedge tests
JP Sargent
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2005)
The determination of the mode II adhesive fracture resistance, GIIC, of structural adhesive joints:: an effective crack length approach
BRK Blackman et al.
ENGINEERING FRACTURE MECHANICS (2005)
Adhesive and composite failure prediction of single-L joint structures under tensile loading
S Feih et al.
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2005)
Stiffener debonding mechanisms in post-buckled CFRP aerospace panels
C Meeks et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2005)
Composite failure prediction of single-L joint structures under bending
S Feih et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2005)
Fatigue crack growth in bonded DCB specimens
A Pirondi et al.
ENGINEERING FRACTURE MECHANICS (2004)
Fracture analyses and experimental results of crack growth under general mixed mode loading conditions
FG Buchholz et al.
ENGINEERING FRACTURE MECHANICS (2004)
On the instantaneous energy release rate of the end-notch flexure adhesive joint specimen
KS Alfredsson
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2004)
Adhesively-bonded joints and repairs in metallic alloys, polymers and composite materials: Adhesives, adhesion theories and surface pretreatment
A Baldan
JOURNAL OF MATERIALS SCIENCE (2004)
Bond between near-surface mounted carbon-fiber-reinforced polymer laminate strips and concrete
JMD Cruz et al.
JOURNAL OF COMPOSITES FOR CONSTRUCTION (2004)
Experimental study of failure and failure progression in T-stiffened skins
K Vijayaraju et al.
COMPOSITE STRUCTURES (2004)
Life prediction methodology for GFRP laminates under spectrum loading
TP Philippidis et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2004)
Fracture mechanisms and failure processes at stiffener run-outs in polymer matrix composite stiffened elements
E Greenhalgh et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2004)
Determination of cohesive laws by the J integral approach
BF Sorensen et al.
ENGINEERING FRACTURE MECHANICS (2003)
Measuring the mode I adhesive fracture energy, GIC, of structural adhesive joints:: the results of an international round-robin
BRK Blackman et al.
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2003)
Trends in the design, manufacture and evaluation of wind turbine blades
PS Veers et al.
WIND ENERGY (2003)
Prediction of Zed section stringer pull-off loads
JP Sargent et al.
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2003)
Analysis of tapered ENF specimen and characterization of bonded interface fracture under Mode-II loading
PZ Qiao et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2003)
Initiation of fracture at the interface corner of bi-material joints
AR Akisanya et al.
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2003)
The effect of defects on the performance of post-buckled CFRP stringer-stiffened panels
E Greenhalgh et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2003)
The calculation of adhesive fracture energies in mode I: revisiting the tapered double cantilever beam (TDCB) test
BRK Blackman et al.
ENGINEERING FRACTURE MECHANICS (2003)
The effects of geometry and material properties on the fracture of single lap-shear joints
MS Kafkalidis et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2002)
The strength of adhesively bonded T-joints
LFM da Silva et al.
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2002)
Fiber-reinforced polymer composites for construction-state-of-the-art review
CE Bakis et al.
JOURNAL OF COMPOSITES FOR CONSTRUCTION (2002)
Determination of dynamic shear modulus of structural adhesives in thick adherend shear test specimens
MR Maheri et al.
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2002)
Three-dimensional numerical investigation of brittle bond fracture
HM Jensen
INTERNATIONAL JOURNAL OF FRACTURE (2002)
Numerical analysis of directionally unstable crack propagation in adhesively bonded joints
B Chen et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2001)
Surface treatment of titanium for adhesive bonding to polymer composites: a review
P Molitor et al.
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2001)
Fatigue of hybrid (adhesive/bolted) joints in SRIM composites
MF Fu et al.
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2001)
Computational fracture analysis of different specimens regarding 3D and mode coupling effects
G Dhondt et al.
ENGINEERING FRACTURE MECHANICS (2001)
Higher-order zig-zag model for analysis of thick composite beams with inclusion of transverse normal stress and sublaminates approximations
U Icardi
COMPOSITES PART B-ENGINEERING (2001)
The impact wedge-peel performance of structural adhesives
BRK Blackman et al.
JOURNAL OF MATERIALS SCIENCE (2000)
Joining techniques for aluminium spaceframes used in automobiles Part II - adhesive bonding and mechanical fasteners
TA Barnes et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2000)
Energy release rate analysis for adhesive and laminate double cantilever beam specimens emphasizing the effect of residual stresses
JA Nairn
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2000)
On the use of fracture mechanics in designing a single lap adhesive joint
MMA Wahab
JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY (2000)
Postbuckling behaviour of a blade-stiffened composite panel loaded in uniaxial compression
BG Falzon et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2000)
Adhesive bonding of fibre reinforced polymer composite materials
IA Ashcroft et al.
ASSEMBLY AUTOMATION (2000)
分享论文
