相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。On the Factors Governing Austenite Stability: Intrinsic versus Extrinsic
Binbin He
MATERIALS (2020)
Microstructure-Property Relationships in Thermomechanically Processed Medium-Mn Steels with High Al Content
Adam Grajcar et al.
METALS (2018)
Observation of deformation twinning and martensitic transformation during nanoindentation of a transformation-induced plasticity steel
Zhiping Xiong et al.
SCIENTIFIC REPORTS (2017)
Site-specific atomic-scale characterisation of retained austenite in a strip cast TRIP steel
Z. P. Xiong et al.
ACTA MATERIALIA (2017)
In-situ EBSD study of deformation behavior of retained austenite in a low-carbon quenching and partitioning steel via uniaxial tensile tests
Wan-song Li et al.
MATERIALS CHARACTERIZATION (2016)
In-situ study of the deformation-induced rotation and transformation of retained austenite in a low-carbon steel treated by the quenching and partitioning process
W. S. Li et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
In situ synchrotron X-ray diffraction studies of the effect of microstructure on tensile behavior and retained austenite stability of thermo-mechanically processed transformation induced plasticity steel
Kun Yan et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
Experiment and modeling to investigate the effect of stress state, strain and temperature on martensitic phase transformation in TRIP-assisted steel
Hwigeon Kim et al.
ACTA MATERIALIA (2015)
Austenite stability and deformation behavior in a cold-rolled transformation-induced plasticity steel with medium manganese content
Z. H. Cai et al.
ACTA MATERIALIA (2015)
Factors influencing the austenite stability during tensile testing of Quenching and Partitioning steel determined via in-situ Electron Backscatter Diffraction
Dorien De Knijf et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2015)
Nano-scale observation on the transformation behavior and mechanical stability of individual retained austenite in CMnSiAl TRIP steels
Hyoung Seok Park et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2015)
Effect of microstructure on retained austenite stability and tensile behaviour in an aluminum-alloyed TRIP steel
J. Chiang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2015)
Effects of retained austenite volume fraction, morphology, and carbon content on strength and ductility of nanostructured TRIP-assisted steels
Y. F. Shen et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2015)
The crystallography of carbide-free bainites in thermo-mechanically processed low Si transformation-induced plasticity steels
Elena V. Pereloma et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2014)
The effect of processing parameters on the microstructure and mechanical properties of low-Si transformation-induced plasticity steels
Fayez Alharbi et al.
JOURNAL OF MATERIALS SCIENCE (2014)
Unravelling the structural and chemical features influencing deformation-induced martensitic transformations in steels
G. K. Tirumalasetty et al.
SCRIPTA MATERIALIA (2014)
A correlative approach to segmenting phases and ferrite morphologies in transformation-induced plasticity steel using electron back-scattering diffraction and energy dispersive X-ray spectroscopy
Azdiar A. Gazder et al.
ULTRAMICROSCOPY (2014)
Orientation dependence of the martensite transformation in a quenched and partitioned steel subjected to uniaxial tension
D. De Knijf et al.
JOURNAL OF APPLIED CRYSTALLOGRAPHY (2014)
Quantitative assessment of the effects of microstructure on the stability of retained austenite in TRIP steels
S. Zhang et al.
ACTA MATERIALIA (2013)
Partial transformation of austenite in Al-Mn-Si TRIP steel upon tensile straining: an in situ EBSD study
T. N. Lomholt et al.
MATERIALS SCIENCE AND TECHNOLOGY (2013)
The effect of morphology on the stability of retained austenite in a quenched and partitioned steel
X. C. Xiong et al.
SCRIPTA MATERIALIA (2013)
Addressing Retained Austenite Stability in Advanced High Strength Steels
Elena V. Pereloma et al.
EUROPEAN SYMPOSIUM ON MARTENSITIC TRANSFORMATIONS (2013)
Deformation-induced austenite grain rotation and transformation in TRIP-assisted steel
G. K. Tirumalasetty et al.
ACTA MATERIALIA (2012)
High-energy X-ray diffraction study on the temperature-dependent mechanical stability of retained austenite in low-alloyed TRIP steels
R. Blonde et al.
ACTA MATERIALIA (2012)
Investigation of plastic deformation heterogeneities in duplex steel by EBSD
S. Wronski et al.
MATERIALS CHARACTERIZATION (2012)
Reply to comments on Austenite stability of ultrafine-grained transformation-induced plasticity steel with Mn partitioning
Seawoong Lee et al.
SCRIPTA MATERIALIA (2012)
Evolution of recrystallization texture in a 0.78 wt.% Cr extra-low-carbon steel after warm and cold rolling
Azdiar A. Gazder et al.
ACTA MATERIALIA (2011)
Nanoscale microstructural characterization of a nanobainitic steel
I. B. Timokhina et al.
ACTA MATERIALIA (2011)
Austenite stability of ultrafine-grained transformation-induced plasticity steel with Mn partitioning
Seawoong Lee et al.
SCRIPTA MATERIALIA (2011)
Characterization of the Bake-hardening Behavior of Transformation Induced Plasticity and Dual-phase Steels Using Advanced Analytical Techniques
Ilana B. Timokhina et al.
ISIJ INTERNATIONAL (2010)
Yielding Behavior of Nb Micro-alloyed C-Mn-Si TRIP Steel Studied by In-situ Synchrotron X-ray Diffraction
Jaehyuk Jung et al.
ISIJ INTERNATIONAL (2010)
Orientation gradients and geometrically necessary dislocations in ultrafine grained dual-phase steels studied by 2D and 3D EBSD
Marion Calcagnotto et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2010)
Strain partitioning and mechanical stability of retained austenite
Joo Hyun Ryu et al.
SCRIPTA MATERIALIA (2010)
Measurement of local plastic strain distribution of stainless steel by electron backscatter diffraction
Masayuki Kamaya
MATERIALS CHARACTERIZATION (2009)
Effect of the bainitic transformation temperature on retained austenite fraction and stability in Ti microalloyed TRIP steels
A. Kammouni et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2009)
Effects of morphology and stability of retained austenite on the ductility of TRIP-aided bainitic steels
Francisca G. Caballero et al.
ISIJ INTERNATIONAL (2008)
Characterization of individual retained austenite grains and their stability in low-alloyed TRIP steels
E. Jimenez-Melero et al.
ACTA MATERIALIA (2007)
Multiscale mechanics of TRIP-assisted multiphase steels:: I.: Characterization and mechanical testing
P. J. Jacques et al.
ACTA MATERIALIA (2007)
Three-dimensional atom probe analysis of solute distribution in thermomechanically processed TRIP steels
E. V. Pereloma et al.
ACTA MATERIALIA (2007)
A study of the carbon distribution in retained austenite
C. P. Scott et al.
SCRIPTA MATERIALIA (2007)
Martensitic transformation of individual grains in low-alloyed TRIP steels
E. Jimenez-Melero et al.
SCRIPTA MATERIALIA (2007)
Microstructure and texture of a lightly deformed TRIP-assisted steel characterized by means of the EBSD technique
Roumen Petrov et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2007)
Thermal stability of retained austenite in TRIP steels studied by synchrotron X-ray diffraction during cooling
NH van Dijk et al.
ACTA MATERIALIA (2005)
Effect of microstructure on the stability of retained austenite in transformation-induced-plasticity steels
IB Timokhina et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2004)
Tensile behavior of TRIP-aided multi-phase steels studied by in situ neutron diffraction
Y Tomota et al.
ACTA MATERIALIA (2004)
Structure-properties relationship in TRIP steels containing carbide-free bainite
BC De Cooman
CURRENT OPINION IN SOLID STATE & MATERIALS SCIENCE (2004)
In situ observations on the mechanical stability of austenite in TRIP-steel
SO Kruijver et al.
JOURNAL DE PHYSIQUE IV (2003)
On the influence of interactions between phases on the mechanical stability of retained austenite in transformation-induced plasticity multiphase steels
PJ Jacques et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2001)