相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。A photogrammetric approach to fusing natural colour and thermal infrared UAS imagery in 3D point cloud generation
Farid Javadnejad et al.
INTERNATIONAL JOURNAL OF REMOTE SENSING (2020)
Evaluating Thermal Attribute Mapping Strategies for Oblique Airborne Photogrammetric System AOS-Tx8
Dong Lin et al.
REMOTE SENSING (2020)
A Cost-Effective System for Aerial 3D Thermography of Buildings
Claudia Daffara et al.
JOURNAL OF IMAGING (2020)
Fusion of thermal imagery with point clouds for building facade thermal attribute mapping
Dong Lin et al.
ISPRS JOURNAL OF PHOTOGRAMMETRY AND REMOTE SENSING (2019)
COMBINATION OF THERMAL AND GEOMETRIC INFORMATION FOR BIM ENRICHMENT
Helene Macher et al.
27TH CIPA INTERNATIONAL SYMPOSIUM: DOCUMENTING THE PAST FOR A BETTER FUTURE (2019)
Comparison and evaluation of geometric calibration methods for infrared cameras to perform metric measurements on a plane
R. Usamentiaga et al.
APPLIED OPTICS (2018)
Review of Unmanned Aerial System (UAS) applications in the built environment: Towards automated building inspection procedures using drones
Tarek Rakha et al.
AUTOMATION IN CONSTRUCTION (2018)
Camera pose refinement by matching uncertain 3D building models with thermal infrared image sequences for high quality texture extraction
Dorota Iwaszczuk et al.
ISPRS JOURNAL OF PHOTOGRAMMETRY AND REMOTE SENSING (2017)
Highly accurate geometric calibration for infrared cameras using inexpensive calibration targets
R. Usamentiaga et al.
MEASUREMENT (2017)
PHOTOGRAMMETRIC 3D BUILDING RECONSTRUCTION FROM THERMAL IMAGES
E. Maset et al.
INTERNATIONAL CONFERENCE ON UNMANNED AERIAL VEHICLES IN GEOMATICS (VOLUME IV-2/W3) (2017)
Structure from motion photogrammetry in physical geography
M. W. Smith et al.
PROGRESS IN PHYSICAL GEOGRAPHY-EARTH AND ENVIRONMENT (2016)
Deep Learning for Robust Normal Estimation in Unstructured Point Clouds
Alexandre Boulch et al.
COMPUTER GRAPHICS FORUM (2016)
Investigation of Mix-Variation Effect on Defect-Detection Ability Using Infrared Thermography as a Nondestructive Evaluation Technique
Sharef Farrag et al.
JOURNAL OF BRIDGE ENGINEERING (2016)
An Easy-to-Use Airborne LiDAR Data Filtering Method Based on Cloth Simulation
Wuming Zhang et al.
REMOTE SENSING (2016)
Combining UAV-based plant height from crop surface models, visible, and near infrared vegetation indices for biomass monitoring in barley
Juliane Bendig et al.
INTERNATIONAL JOURNAL OF APPLIED EARTH OBSERVATION AND GEOINFORMATION (2015)
Large Scale Automatic Analysis and Classification of Roof Surfaces for the Installation of Solar Panels Using a Multi-Sensor Aerial Platform
Luis Lopez-Fernandez et al.
REMOTE SENSING (2015)
Combined Use of Terrestrial Laser Scanning and IR Thermography Applied to a Historical Building
Antonio Costanzo et al.
SENSORS (2015)
Non-destructive approach for the generation and thermal characterization of an as-built BIM
S. Lagueela et al.
CONSTRUCTION AND BUILDING MATERIALS (2014)
Automatic facade modelling using point cloud data for energy-efficient retrofitting
M. Previtali et al.
APPLIED GEOMATICS (2014)
An automated vision-based method for rapid 3D energy performance modeling of existing buildings using thermal and digital imagery
Youngjib Ham et al.
ADVANCED ENGINEERING INFORMATICS (2013)
Automatic thermographic and RGB texture of as-built BIM for energy rehabilitation purposes
S. Lagueela et al.
AUTOMATION IN CONSTRUCTION (2013)
A comparison of dense matching algorithms for scaled surface reconstruction using stereo camera rigs
Ali Hosseininaveh Ahmadabadian et al.
ISPRS JOURNAL OF PHOTOGRAMMETRY AND REMOTE SENSING (2013)
A quantitative methodology to evaluate thermal bridges in buildings
Francesco Asdrubali et al.
APPLIED ENERGY (2012)
Automation of thermographic 3D modelling through image fusion and image matching techniques
S. Laguela et al.
AUTOMATION IN CONSTRUCTION (2012)
Novel approach to 3D thermography and energy efficiency evaluation
D. Gonzalez-Aguilera et al.
ENERGY AND BUILDINGS (2012)
Calibration of building energy models for retrofit analysis under uncertainty
Y. Heo et al.
ENERGY AND BUILDINGS (2012)
An Automated Technique for Generating Georectified Mosaics from Ultra-High Resolution Unmanned Aerial Vehicle (UAV) Imagery, Based on Structure from Motion (SfM) Point Clouds
Darren Turner et al.
REMOTE SENSING (2012)
A screening methodology for implementing cost effective energy retrofit measures in Canadian office buildings
S. E. Chidiac et al.
ENERGY AND BUILDINGS (2011)
Mapping Infrared Data on Terrestrial Laser Scanning 3D Models of Buildings
Mario Ivan Alba et al.
REMOTE SENSING (2011)
The 3D Hough Transform for Plane Detection in Point Clouds: A Review and a new Accumulator Design
Dorit Borrmann et al.
3D RESEARCH (2011)
Accurate, Dense, and Robust Multiview Stereopsis
Yasutaka Furukawa et al.
IEEE TRANSACTIONS ON PATTERN ANALYSIS AND MACHINE INTELLIGENCE (2010)
Precise ellipse estimation without contour point extraction
Jean-Nicolas Ouellet et al.
MACHINE VISION AND APPLICATIONS (2009)
Fusion of lidar and imagery for reliable building extraction
Dong Hyuk Lee et al.
PHOTOGRAMMETRIC ENGINEERING AND REMOTE SENSING (2008)
Modeling the world from Internet photo collections
Noah Snavely et al.
INTERNATIONAL JOURNAL OF COMPUTER VISION (2008)
Energy performance assessment of existing dwellings
Bart Poel et al.
ENERGY AND BUILDINGS (2007)
Evaluation of building materials using infrared thermography
Eva Barreira et al.
CONSTRUCTION AND BUILDING MATERIALS (2007)
Uncalibrated building energy simulation modeling results
Mushtaq Ahmad et al.
HVAC&R RESEARCH (2006)
A flexible new technique for camera calibration
ZY Zhang
IEEE TRANSACTIONS ON PATTERN ANALYSIS AND MACHINE INTELLIGENCE (2000)
分享论文
