相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。Cyclic response of electrodeposited copper films. Experiments and elastic-viscoplastic mean-field modeling
G. Girard et al.
MECHANICS OF MATERIALS (2021)
A strategy for synthetic microstructure generation and crystal plasticity parameter calibration of fine-grain-structured dual-phase steel
Wenqi Liu et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2020)
Predicting forming limit diagrams for magnesium alloys using crystal plasticity finite elements
Hyuk Jong Bong et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2020)
Study on the plastic anisotropy of advanced high strength steel sheet: Experiments and microstructure-based crystal plasticity modeling
Qian Li et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2020)
Modelling-assisted description of anisotropic edge failure in magnesium sheet alloy under mixed-mode loading
Youngung Jeong et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2020)
New robust self-consistent homogenization schemes of elasto-viscoplastic polycrystals
Miroslav Zecevic et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2020)
A comparative study between elasto-plastic self-consistent crystal plasticity and anisotropic yield function with distortional hardening formulations for sheet metal forming
Zhangxi Feng et al.
MECHANICS OF MATERIALS (2020)
An efficient elasto-visco-plastic self-consistent formulation: Application to steel subjected to loading path changes
Youngung Jeong et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2020)
Multi-scale mechanisms of twinning-detwinning in magnesium alloy AZ31B simulated by crystal plasticity modeling and validated via in situ synchrotron XRD and in situ SEM-EBSD
Hongjia Zhang et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2019)
Deep drawing simulations using the finite element method embedding a multi-level crystal plasticity constitutive law: Experimental verification and sensitivity analysis
Timothy J. Barrett et al.
COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2019)
Investigating mesh sensitivity and polycrystalline RVEs in crystal plasticity finite element simulations
Hojun Lim et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2019)
An implicit formulation of the elasto-plastic self-consistent polycrystal plasticity model and its implementation in implicit finite elements
Milovan Zecevic et al.
MECHANICS OF MATERIALS (2019)
Effect of shear deformation on plasticity, recrystallization mechanism and texture evolution of Mg-3Al-1Zn alloy sheet: Experiment and coupled finite element-VPSC simulation
S. F. Chen et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2019)
Extension of the visco-plastic self-consistent model to account for elasto-visco-plastic behavior using a perturbed visco-plastic approach
Youngung Jeong et al.
MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING (2019)
Mechanical response of stainless steel subjected to biaxial load path changes: Cruciform experiments and multi-scale modeling
Manas V. Upadhyay et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2018)
Crystal plasticity finite element analysis of ferritic stainless steel for sheet formability prediction
Ji Hoon Kim et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2017)
Crystal-plasticity finite-element analysis of anisotropic deformation behavior in a commercially pure titanium Grade 1 sheet
Takayuki Hama et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2017)
A comparative study between micro- and macro-mechanical constitutive models developed for complex loading scenarios
Youngung Jeong et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2017)
Coupling elasto-plastic self-consistent crystal plasticity and implicit finite elements: Applications to compression, cyclic tension-compression, and bending to large strains
Milovan Zecevic et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2017)
Finite element simulation of gap opening between cladding tube and spacer grid in a fuel rod assembly using crystallographic models of irradiation growth and creep
Anirban Patra et al.
NUCLEAR ENGINEERING AND DESIGN (2017)
Multiaxial constitutive behavior of an interstitial-free steel: Measurements through X-ray and digital image correlation
Y. Jeong et al.
ACTA MATERIALIA (2016)
Mechanical behavior of low carbon steel subjected to strain path changes: Experiments and modeling
W. Wen et al.
ACTA MATERIALIA (2016)
A virtual laboratory using high resolution crystal plasticity simulations to determine the initial yield surface for sheet metal forming operations
Haiming Zhang et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2016)
Forming limit prediction using a self-consistent crystal plasticity framework: a case study for body-centered cubic materials
Youngung Jeong et al.
MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING (2016)
Uncertainty in flow stress measurements using X-ray diffraction for sheet metals subjected to large plastic deformations
Y. Jeong et al.
JOURNAL OF APPLIED CRYSTALLOGRAPHY (2016)
Evaluation of biaxial flow stress based on elasto-viscoplastic self-consistent analysis of X-ray diffraction measurements
Youngung Jeong et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2015)
Experimental and Visco-Plastic Self-Consistent evaluation of forming limit diagrams for anisotropic sheet metals: An efficient and robust implementation of the M-K model
C. Schwindt et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2015)
Modeling of the cyclic behavior of elastic-viscoplastic composites by the additive tangent Mori-Tanaka approach and validation by finite element calculations
C. Czarnota et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2015)
A multiscale simulation framework of the accumulative roll bonding process accounting for texture evolution
A. Prakash et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2015)
An elasto-plastic self-consistent model with hardening based on dislocation density, twinning and de-twinning: Application to strain path changes in HCP metals
Milovan Zecevic et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2015)
Multiscale deep drawing analysis of dual-phase steels using grain cluster-based RGC scheme
D. D. Tjahjanto et al.
MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING (2015)
Studying the effect of stress relaxation and creep on lattice strain evolution of stainless steel under tension
H. Wang et al.
ACTA MATERIALIA (2013)
A crystallographic dislocation model for describing hardening of polycrystals during strain path changes. Application to low carbon steels
K. Kitayama et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2013)
Integration of self-consistent polycrystal plasticity with dislocation density based hardening laws within an implicit finite element framework: Application to low-symmetry metals
Marko Knezevic et al.
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2013)
Study of internal lattice strain distributions in stainless steel using a full-field elasto-viscoplastic formulation based on fast Fourier transforms
A. K. Kanjarla et al.
ACTA MATERIALIA (2012)
Stress-strain relationship between ferrite and martensite in a dual-phase steel studied by in situ neutron diffraction and crystal plasticity theories
W. Woo et al.
ACTA MATERIALIA (2012)
Time-dependent springback of advanced high strength steels
H. Lim et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2012)
Finite element modeling using homogeneous anisotropic hardening and application to spring-back prediction
Jin-Woo Lee et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2012)
Multiscale modeling of plasticity based on embedding the viscoplastic self-consistent formulation in implicit finite elements
Javier Segurado et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2012)
A constitutive model of twinning and detwinning for hexagonal close packed polycrystals
H. Wang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2012)
Process parameter design of spring-back and spring-go in V-bending process using Taguchi technique
Sutasn Thipprakmas et al.
MATERIALS & DESIGN (2011)
Overview of constitutive laws, kinematics, homogenization and multiscale methods in crystal plasticity finite-element modeling: Theory, experiments, applications
F. Roters et al.
ACTA MATERIALIA (2010)
A finite strain elastic-viscoplastic self-consistent model for polycrystalline materials
H. Wang et al.
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2010)
Crystal plasticity-based forming limit prediction for non-cubic metals: Application to Mg alloy AZ31B
C. John Neil et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2009)
Predictions of forming limit diagrams using a rate-dependent polycrystal self-consistent plasticity model
J. W. Signorelli et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2009)
Homogenization of elastic-viscoplastic heterogeneous materials: Self-consistent and Mori-Tanaka schemes
S. Mercier et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2009)
The study of spring-back of CK67 steel sheet in V-die and U-die bending processes
M. Bakhshi-Jooybari et al.
MATERIALS & DESIGN (2009)
Investigation of spring-go phenomenon using finite element method
Sutasn Thipprakmas et al.
MATERIALS & DESIGN (2008)
Simulation of earing during deep drawing of magnesium alloy AZ31
Tom Walde et al.
ACTA MATERIALIA (2007)
Self-consistent modelling of the mechanical behaviour of viscoplastic polycrystals incorporating intragranular field fluctuations
R. A. Lebensohn et al.
PHILOSOPHICAL MAGAZINE (2007)
Validation of an interaction law for the Eshelby inclusion problem in elasto-viscoplasticity
S Mercier et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2005)
A selfconsistent formulation for the prediction of the anisotropic behavior of viscoplastic polycrystals with voids
RA Lebensohn et al.
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2004)
Creep and anelasticity in the springback of aluminum
JF Wang et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2004)
Averaging models for heterogeneous viscoplastic and elastic viscoplastic materials
A Molinari
JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY-TRANSACTIONS OF THE ASME (2002)
Mechanical response of zirconium -: II.: Experimental and finite element analysis of bent beams
GC Kaschner et al.
ACTA MATERIALIA (2001)
Mechanical response of zirconium -: I.: Derivation of a polycrystal constitutive law and finite element analysis
CN Tomé et al.
ACTA MATERIALIA (2001)
The influence of crystallographic texture and interstitial impurities on the mechanical behavior of zirconium
GC Kaschner et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2000)