相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。Ceramic Sonotrodes for Light Alloy Melt Treatment
H. Puga et al.
INTERNATIONAL JOURNAL OF METALCASTING (2021)
Influence of ZrB2/hBN particles on the wear behaviour of AA7075 composites fabricated through stir followed by squeeze cast technique
P. Loganathan et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY (2021)
Effect of Al2O3Particle Size on Mechanical Properties of Ultrasonic-Assisted Stir-Casted Al A356 Matrix Composites
Ugur Aybarc et al.
INTERNATIONAL JOURNAL OF METALCASTING (2021)
Nano-indentation and Corrosion Characteristics of Ultrasonic Vibration Assisted Stir-Cast AZ31-WC-Graphite Nano-composites
Sudip Banerjee et al.
INTERNATIONAL JOURNAL OF METALCASTING (2021)
Effect of ageing temperature on the corrosion behaviour of UHTC particulates reinforced magnesium composites fabricated through ultrasonic assisted squeeze casting process
A. Gnanavelbabu et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2021)
Influence of ultrasonication power on grain refinement, mechanical properties and wear behaviour of AZ91D/nano-Al2O3 composites
A. Gnanavelbabu et al.
MATERIALS RESEARCH EXPRESS (2020)
Experimental Characterization of Dimensional and Surface Alternation of Straight and Angular Cutting on Self-lubricating Composite: A Wire EDM Approach
A. Gnanavelbabu et al.
ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING (2020)
Ultrasonic Melt Treatment of Light Alloys
Joaquim Barbosa et al.
INTERNATIONAL JOURNAL OF METALCASTING (2019)
The Use of Stirring Methods for the Production of SiC-Reinforced Aluminum Matrix Composite and Validation Via Simulation Studies
Ugur Aybarc et al.
INTERNATIONAL JOURNAL OF METALCASTING (2019)
Synthesis and comparative sliding wear behavior of stir cast Mg and Mg/Al2O3 metal matrix composites
Amandeep Singh et al.
MATERIALS RESEARCH EXPRESS (2019)
Influence mechanisms of Zr and Fe particle additions on the microstructure and mechanical behavior of squeeze-cast 7075Al hybrid composites
Tiwen Lu et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2019)
Ultrasonic assisted squeeze casting of a wrought aluminum alloy
Gang Chen et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2019)
Development of high strength and toughness nano-SiCp/A356 composites with ultrasonic vibration and squeeze casting
Du Yuan et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2019)
Tribological behavior of ultrasonic assisted double stir casted novel nano-composite material (AA7150-hBN) using Taguchi technique
Pagidi Madhukar et al.
COMPOSITES PART B-ENGINEERING (2019)
Conventional stir casting versus ultrasonic assisted stir casting process: Mechanical and physical characteristics of AMCs
Amir Hussain Idrisi et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2019)
Multi-response parametric optimization of squeeze casting process for fabricating Al 6061-SiC composite
Muhammad Hassan Sarfraz et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2019)
Effect of high intensity ultrasonic treatment on microstructural modification and hardness of a nickel-aluminum bronze alloy
M. E. Moussa et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2018)
Prediction of effect of reinforcement content, flake size and flake time on the density and hardness of flake AA2024-SiC nanocomposites using neural networks
Temel Varol et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2018)
A systematic approach to model and optimize wear behaviour of castings produced by squeeze casting process
Manjunath G. C. Patel et al.
JOURNAL OF MANUFACTURING PROCESSES (2018)
The effect of pouring temperature and surface angle of vortex casting on microstructural changes and mechanical properties of 7050Al-3 wt% SiC composite
S. H. Mousavi Anijdan et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
Combined effects of ultrasonic melt treatment, Si addition and solution treatment on the microstructure and tensile properties of multicomponent Al-Si alloys
Jae-Gil Jung et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2017)
Characterization the role of squeezing pressure on microstructure, tensile properties and failure mode of a new Mg-6Zn-4Al-0.5Cu magnesium alloy
Shaozhen Zhu et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2017)
Improvement of particles distribution of in-situ 5 vol% TiB2 particulates reinforced Al-4.5Cu alloy matrix composites with ultrasonic vibration treatment
Qi Gao et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2017)
The effect of pressure and pouring temperature on the porosity, microstructure, hardness and yield stress of AA2024 aluminum alloy during the squeeze casting process
A. Jahangiri et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2017)
Grain refinement of binary Al-Si, Al-Cu and Al-Ni alloys by ultrasonication
N. Srivastava et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2017)
Influence of squeeze casting pressure and heat treatment on microstructure and mechanical properties of Mg94Ni2Y4 alloy with LPSO structure
Liangyan Hao et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
Taguchi approach to influence of processing parameters on erosive wear behaviour of Al7034-T6 composites
B. A. Mudasar Pasha et al.
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2017)
Back propagation genetic and recurrent neural network applications in modelling and analysis of squeeze casting process
Manjunath G. C. Patel et al.
APPLIED SOFT COMPUTING (2017)
Mechanical behavior of AZ31/Al2O3 magnesium alloy nanocomposites prepared using ultrasound assisted stir casting
Apratim Khandelwal et al.
COMPOSITES PART B-ENGINEERING (2017)
Microstructure, mechanical response and fractography of AZ91E/Al2O3 (p) nano composite fabricated by semi solid stir casting method
Sameer D. Kumar et al.
JOURNAL OF MAGNESIUM AND ALLOYS (2017)
Squeeze casting process modeling by a conventional statistical regression analysis approach
Manjunath G. C. Patel et al.
APPLIED MATHEMATICAL MODELLING (2016)
An investigation of material removal rate and surface roughness of squeeze casted A413 alloy on WEDM by multi response optimization using RSM
R. Soundararajan et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2016)
Effects of ultrasonic treatment on microstructure and mechanical properties of Mg-6Zn-0.5Y-2Sn alloy
Han-song Xue et al.
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2016)
Investigation of the factors influencing cavitation intensity during the ultrasonic treatment of molten aluminium
I. Tzanakis et al.
MATERIALS & DESIGN (2016)
Modelling and multi-objective optimisation of squeeze casting process using regression analysis and genetic algorithm
G. C. Manjunath Patel et al.
AUSTRALIAN JOURNAL OF MECHANICAL ENGINEERING (2016)
An investigation into aluminum-aluminum bimetal fabrication by squeeze casting
Teng Liu et al.
MATERIALS & DESIGN (2015)
Optimization of laser cutting parameters for Al6061/SiCp/Al2O3 composite using grey based response surface methodology (GRSM)
R. Adalarasan et al.
MEASUREMENT (2015)
Effects of pouring temperature and cylinder temperature on microstructures and mechanical properties of rheomoulding AZ91D alloy
Ming-fan Qi et al.
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2015)
Grain Refinement of Pure Aluminum Using Ultrasonics
C. Allen et al.
International Journal of Metalcasting (2015)
Modeling and multi-objective optimization of powder mixed electric discharge machining process of aluminum/alumina metal matrix composite
Gangadharudu Talla et al.
ENGINEERING SCIENCE AND TECHNOLOGY-AN INTERNATIONAL JOURNAL-JESTECH (2015)
ULTRASONIC CAVITATION-ASSISTED MOLTEN METAL PROCESSING OF CAST A356-NANOCOMPOSITES
Xiaoda Liu et al.
INTERNATIONAL JOURNAL OF METALCASTING (2014)
Processing, microstructure and mechanical properties of micro-SiC particles reinforced magnesium matrix composites fabricated by stir casting assisted by ultrasonic treatment processing
X. J. Wang et al.
MATERIALS & DESIGN (2014)
Effects of processing parameters and Ca content on microstructure and mechanical properties of squeeze casting AZ91-Ca alloys
Yang Zhang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2014)
Effects of ultrasonic treatment on microstructures of AZ91 alloy
Yue-shuang Yang et al.
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2014)
Analysis of dry sliding friction and wear behaviour of AA6351-SiC-B4C composites using grey relational analysis
S. Thirumalai Kumaran et al.
TRIBOLOGY-MATERIALS SURFACES & INTERFACES (2014)
Effects of squeeze casting parameters on solidification time based on neural network
Rong Ji Wang et al.
INTERNATIONAL JOURNAL OF MATERIALS & PRODUCT TECHNOLOGY (2013)
Influence of technical parameters on strength and ductility of AlSi9Cu3 alloys in squeeze casting
Shi-bo Bin et al.
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2013)
Design Element Concept of squeeze casting process
R. Ahmad et al.
APPLIED MATHEMATICAL MODELLING (2012)
Optimization of squeeze casting parameters for non symmetrical AC2A aluminium alloy castings through Taguchi method
P. Senthil et al.
JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY (2012)
Processing, microstructure and tensile properties of nano-sized Al2O3 particle reinforced aluminum matrix composites
Hai Su et al.
MATERIALS & DESIGN (2012)
Optimization of AZ80 magnesium alloy squeeze cast process parameters using morphological matrix
Guo Zhi-hong et al.
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2012)
Enhanced properties of Mg-based nano-composites reinforced with Al2O3 nano-particles
M. Habibnejad-Korayem et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2009)
Effect of ultrasonic power on microstructure and mechanical properties of AZ91 alloy
Deming Gao et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2009)
RECENT DEVELOPMENTS ON ULTRASONIC CAVITATION BASED SOLIDIFICATION PROCESSING OF BULK MAGNESIUM NANOCOMPOSITES
G. Cao et al.
INTERNATIONAL JOURNAL OF METALCASTING (2008)
Optimization of squeeze casting process parameters using Taguchi analysis
P. Vijian et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2007)
Effects of squeeze casting parameters on density, macrostructure and hardness of LM13 alloy
A. Maleki et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2006)
分享论文
