相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。Understanding the hydrogen effect on pop-in behavior of an equiatomic high-entropy alloy during in-situ nanoindentation
Dong Wang et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2022)
Effect of hydrogen on deformation behavior of Alloy 725 revealed by in-situ bi-crystalline micropillar compression test
Xu Lu et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2021)
Pop-In Phenomenon as a Fundamental Plasticity Probed by Nanoindentation Technique
Takahito Ohmura et al.
MATERIALS (2021)
Hydrogen embrittlement of low carbon structural steel at macro-, micro- and nano-levels
Muhammad Wasim et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2020)
A Modified Electrochemical Nanoindentation Setup for Probing Hydrogen-Material Interaction Demonstrated on a Nickel-Based Alloy
Anna Sophie Ebner et al.
JOM (2020)
An SEM compatible plasma cell for in situ studies of hydrogen-material interaction
A. Massone et al.
REVIEW OF SCIENTIFIC INSTRUMENTS (2020)
Insight into indentation-induced plastic flow in austenitic stainless steel
Xia Wenzhen et al.
JOURNAL OF MATERIALS SCIENCE (2020)
Effect of grain size on the strain rate sensitivity of CoCrFeNi high-entropy alloy
Yakai Zhao et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)
Addressing H-Material Interaction in Fast Diffusion Materials-A Feasibility Study on a Complex Phase Steel
Agustina Massone et al.
MATERIALS (2020)
Microstructural and micro-mechanical characterization during hydrogen charging: An in situ scanning electron microscopy study
Jinwoo Kim et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2019)
Influence of hydrogen on incipient plasticity in CoCrFeMnNi high-entropy alloy
Guanghui Yang et al.
SCRIPTA MATERIALIA (2019)
Dependence of strain rate on hydrogen-induced hardening of austenitic stainless steel investigated by nanoindentation
Yuanjian Hong et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2019)
Influences of hydrogen charging method on the hydrogen distribution and nanomechanical properties of face-centered cubic high-entropy alloy: A comparative study
Yakai Zhao et al.
SCRIPTA MATERIALIA (2019)
Effect of hydrogen-induced surface steps on the nanomechanical behavior of a CoCrFeMnNi high-entropy alloy revealed by in-situ electrochemical nanoindentation
Dong Wang et al.
INTERMETALLICS (2019)
Effect of hydrogen on nanomechanical properties in Fe-22Mn-0.6C TWIP steel revealed by in-situ electrochemical nanoindentation
Dong Wang et al.
ACTA MATERIALIA (2019)
Rate limiting deformation mechanisms of bcc metals in confined volumes
D. Kiener et al.
ACTA MATERIALIA (2019)
Influence of crystal orientation and Berkovich tip rotation on the mechanical characterization of grain boundaries in molybdenum
S. Jakob et al.
MATERIALS & DESIGN (2019)
Hydrogen-enhanced fatigue crack growth in a single-edge notched tensile specimen under in-situ hydrogen charging inside an environmental scanning electron microscope
Di Wan et al.
ACTA MATERIALIA (2019)
Hydrogen embrittlement revealed via novel in situ fracture experiments using notched micro-cantilever specimens
Yun Deng et al.
ACTA MATERIALIA (2018)
Overview on micro- and nanomechanical testing: New insights in interface plasticity and fracture at small length scales
G. Dehm et al.
ACTA MATERIALIA (2018)
Essential refinements of spherical nanoindentation protocols for the reliable determination of mechanical flow curves
A. Leitner et al.
MATERIALS & DESIGN (2018)
Tensile mechanical properties and fracture behaviors of nickel-based superalloy 718 in the presence of hydrogen
Xinfeng Li et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2018)
Effect of hydrogen on dislocation nucleation in alloy 718
Gaute Stenerud et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2017)
Hydrogen-induced nanohardness variations in a CoCrFeMnNi high-entropy alloy
Yakai Zhao et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2017)
Effect of strain rate on hydrogen embrittlement in low-carbon martensitic steel
Yuji Momotani et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2017)
Effect of temperature on hydrogen embrittlement susceptibility of alloy 718 in Light Water Reactor environment
Florian Galliano et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2017)
Advanced Nanoindentation Testing for Studying Strain-Rate Sensitivity and Activation Volume
Verena Maier-Kiener et al.
JOM (2017)
Thermally activated deformation and the rate controlling mechanism in CoCrFeMnNi high entropy alloy
Sun Ig Hong et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
In-situ micro-cantilever bending test in environmental scanning electron microscope: Real time observation of hydrogen enhanced cracking
Y. Deng et al.
SCRIPTA MATERIALIA (2017)
In situ electrochemical microcantilever bending test: A new insight into hydrogen enhanced cracking
Tarlan Hajilou et al.
SCRIPTA MATERIALIA (2017)
Multi-scale observation of hydrogen-induced, localized plastic deformation in fatigue-crack propagation in a pure iron
Yuhei Ogawa et al.
SCRIPTA MATERIALIA (2017)
Nanoindentation testing as a powerful screening tool for assessing phase stability of nanocrystalline high-entropy alloys
Verena Maier-Kiener et al.
MATERIALS & DESIGN (2017)
Thermal activation mechanisms and Labusch-type strengthening analysis for a family of high-entropy and equiatomic solid-solution alloys
Zhenggang Wu et al.
ACTA MATERIALIA (2016)
Effect of hydrogen on the hardness of different phases in super duplex stainless steel
Nousha Kheradmand et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2016)
Dynamic nanoindentation testing for studying thermally activated processes from single to nanocrystalline metals
Karsten Durst et al.
CURRENT OPINION IN SOLID STATE & MATERIALS SCIENCE (2015)
Comparison of In Situ Micromechanical Strain-Rate Sensitivity Measurement Techniques
Juri Wehrs et al.
JOM (2015)
Can microscale fracture tests provide reliable fracture toughness values? A case study in silicon
Balila Nagamani Jaya et al.
JOURNAL OF MATERIALS RESEARCH (2015)
Nanomechanical behavior and structural stability of a nanocrystalline CoCrFeNiMn high-entropy alloy processed by high-pressure torsion
Dong-Hyun Lee et al.
JOURNAL OF MATERIALS RESEARCH (2015)
Thermally activated deformation processes in body-centered cubic Cr - How microstructure influences strain-rate sensitivity
Verena Maier et al.
SCRIPTA MATERIALIA (2015)
Temperature dependence of the mechanical properties of equiatomic solid solution alloys with face-centered cubic crystal structures
Z. Wu et al.
ACTA MATERIALIA (2014)
Mechanisms of hydrogen-enhanced localized plasticity: An atomistic study using α-Fe as a model system
J. Song et al.
ACTA MATERIALIA (2014)
Stress-dependent hardening-to-softening transition of hydrogen effects in nanoindentation of a linepipe steel
Dong-Hyun Lee et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2014)
Effect of trapping and temperature on the hydrogen embrittlement susceptibility of alloy 718
Florian Galliano et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2014)
Incipient plasticity and deformation mechanisms in single-crystal Mg during spherical nanoindentation
D. Catoor et al.
ACTA MATERIALIA (2013)
Incipient plasticity and dislocation nucleation of FeCoCrNiMn high-entropy alloy
C. Zhu et al.
ACTA MATERIALIA (2013)
Resolving the hydrogen effect on dislocation nucleation and mobility by electrochemical nanoindentation
Afrooz Barnoush et al.
SCRIPTA MATERIALIA (2012)
Nanoindentation strain-rate jump tests for determining the local strain-rate sensitivity in nanocrystalline Ni and ultrafine-grained Al
Verena Maier et al.
JOURNAL OF MATERIALS RESEARCH (2011)
CONTINUOUS STIFFNESS MEASUREMENT DURING INSTRUMENTED INDENTATION TESTING
J. Hay et al.
EXPERIMENTAL TECHNIQUES (2010)
Tensile properties of Ni-based superalloy 720Li: Temperature and strain rate effects
K. Gopinath et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2008)
Determination of mechanical properties of copper at the micron scale
Daniel Kiener et al.
ADVANCED ENGINEERING MATERIALS (2006)
Hydrogen effects on dislocation activity in austenitic stainless steel
K. A. Nibur et al.
ACTA MATERIALIA (2006)
Mechanical properties of nanocrystalline materials
MA Meyers et al.
PROGRESS IN MATERIALS SCIENCE (2006)
Effect of nanocrystalline and ultrafine grain sizes on the strain rate sensitivity and activation volume: fcc versus bcc metals
Q Wei et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2004)
Mechanical behavior of nanocrystalline metals and alloys
KS Kumar et al.
ACTA MATERIALIA (2003)
Nanocrystalline electrodeposited Ni: microstructure and tensile properties
F Dalla Torre et al.
ACTA MATERIALIA (2002)
Comparison of hydrogen embrittlement of stainless steels and nickel-base alloys
OA El kebir et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2002)
The effects of hydrogen on deformation and cross slip in a BCC titanium alloy
KR Morasch et al.
SCRIPTA MATERIALIA (2001)
分享论文
