相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。The compatibilization of PLA-g-TPU graft copolymer on polylactide/thermoplastic polyurethane blends
Xian-Zhong Mo et al.
JOURNAL OF POLYMER RESEARCH (2020)
Reactive Comb Polymer Compatibilized Immiscible PVDF/PLLA Blends: Effects of the Main Chain Structure of Compatibilizer
Xin Yang et al.
POLYMERS (2020)
Direct evidence for the validity of assessing reaction extent by torque spectrum during reactive processing
Yan Zhang et al.
POLYMER (2020)
Supertough and Transparent Poly(lactic acid) Nanostructure Blends with Minimal Stiffness Loss
Zhaoxin Li et al.
ACS OMEGA (2020)
Simultaneously Grafting Poly(lactic acid) (PLLA) and Polyethylene (PE) Chains onto a Reactive SG Copolymer: Formation of Supertough PLLA/PE Blends by Reactive Processing
Qunli Yu et al.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2020)
Supertough Poly(lactic acid) and Sustainable Elastomer Blends Compatibilized by PLLA-b-PMMA Block Copolymers as Effective A-b-C-Type Compatibilizers
Hai Jiang et al.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2020)
Fabrication and characterization of TiMoCu/PMMA composite for biomedical application
Yong-Hua Li et al.
MATERIALS LETTERS (2020)
Compatibilization of iPP/HDPE Blends with PE-g-iPP Graft Copolymers
Kristine Klimovica et al.
ACS MACRO LETTERS (2020)
Improvement of PLLA Ductility by Blending with PVDF: Localization of Compatibilizers at Interface and Its Glycidyl Methacrylate Content Dependency
Yan Zhang et al.
POLYMERS (2020)
Enhanced compatibility between poly(lactic acid) and poly (butylene adipate-co-terephthalate) by incorporation of N-halamine epoxy precursor
Yan Zhao et al.
INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2020)
Poly (lactic acid) blends: Processing, properties and applications
Mohammadreza Nofar et al.
INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2019)
Design of Supertoughened and Heat-Resistant PLLA/Elastomer Blends by Controlling the Distribution of Stereocomplex Crystallites and the Morphology
Baogou Wu et al.
MACROMOLECULES (2019)
Application of polymethylmethacrylate-grafted cellulose as reinforcement for compatibilised polylactic acid/natural rubber blends
Noor Afizah Rosli et al.
CARBOHYDRATE POLYMERS (2019)
Compatibilization of immiscible PLA-based biodegradable polymer blends using amphiphilic di-block copolymers
Yue Ding et al.
EUROPEAN POLYMER JOURNAL (2019)
Toward Fully Bio-based and Supertough PLA Blends via in Situ Formation of Cross-Linked Biopolyamide Continuity Network
Hongzhi Liu et al.
MACROMOLECULES (2019)
Transparent PC/PMMA Blends Via Reactive Compatibilization in a Twin-Screw Extruder
Tobias Bubmann et al.
POLYMERS (2019)
Sub-100 nm Cocontinuous Structures Fabricated in Immiscible Commodity Polymer Blend with Extremely Low Volume/Viscosity Ratio
Fei Li et al.
ACS APPLIED POLYMER MATERIALS (2019)
Manufacturing and Characterization of Toughened Poly(lactic acid) (PLA) Formulations by Ternary Blends with Biopolyesters
Maria Jesus Garcia-Campo et al.
POLYMERS (2018)
Enhancing Impact Resistance of Polymer Blends via Self-Assembled Nanoscale Interfacial Structures
Yichen Guo et al.
MACROMOLECULES (2018)
Highly-Toughened Polylactide- (PLA-) Based Ternary Blends with Significantly Enhanced Glass Transition and Melt Strength: Tailoring the Interfacial Interactions, Phase Morphology, and Performance
Majid Mehrabi Mazidi et al.
MACROMOLECULES (2018)
Tuning PVDF/PS/HDPE polymer blends to tri-continuous morphology by grafted copolymers as the compatibilizers
Yan Shao et al.
POLYMER (2018)
Bio-Based PLA/NR-PMMA/NR Ternary Thermoplastic Vulcanizates with Balanced Stiffness and Toughness: Soft-Hard Core-Shell Continuous Rubber Phase, In Situ Compatibilization, and Properties
Yukun Chen et al.
ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2018)
New advances in the biodegradation of Poly(lactic) acid
Xiang Qi et al.
INTERNATIONAL BIODETERIORATION & BIODEGRADATION (2017)
A new approach to fabricate polypropylene alloy with excellent low-temperature toughness and balanced toughness-rigidity through unmatched thermal expansion coefficients between components
Yonggang Shangguan et al.
POLYMER (2017)
Progress in Toughening Poly(Lactic Acid) with Renewable Polymers
Ming Wang et al.
POLYMER REVIEWS (2017)
Fabrication of gelatin-poly(epichlorohydrin-co-ethylene oxide) fiber scaffolds by Forcespinning® for tissue engineering and drug release
Narsimha Mamidi et al.
MRS COMMUNICATIONS (2017)
Highly toughened polylactide/epoxidized poly(styrene-b-butadiene-b-styrene) blends with excellent tensile performance
Yanshai Wang et al.
EUROPEAN POLYMER JOURNAL (2016)
Effect of Dual Reactive Compatibilizers on the Formation of Co-Continuous Morphology of Low Density Polyethylene/Polyamide 6 Blends with Low Polyamide 6 Content
Dawei Ren et al.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2016)
Intermolecular cooperativity and entanglement network in a miscible PLA/PMMA blend in the presence of nanosilica
Xiaoqiong Hao et al.
POLYMER (2016)
Highly toughened polylactide with epoxidized polybutadiene by in-situ reactive compatibilization
Yanshai Wang et al.
POLYMER (2016)
Dramatic Improvement in Toughness of PLLA/PVDF Blends: the Effect of Compatibilizer Architectures
Wenyong Dong et al.
ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2016)
Effect of a dual compatibilizer on the formation of co-continuous morphology of immiscible polymer blends
Changjiang Yu et al.
MATERIALS & DESIGN (2016)
Dynamic vulcanization of castor oil in a polylactide matrix for toughening
Tong-Hui Zhao et al.
RSC ADVANCES (2016)
Effects of molecular weight and grafted maleic anhydride of functionalized polylactic acid used in reactive compatibilized binary and ternary blends of polylactic acid and thermoplastic cassava starch
Sukeewan Detyothin et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2015)
Supertoughened Biobased Poly(lactic acid)-Epoxidized Natural Rubber Thermoplastic Vulcanizates: Fabrication, Co-continuous Phase Structure, Interfacial in Situ Compatibilization, and Toughening Mechanism
Youhong Wang et al.
JOURNAL OF PHYSICAL CHEMISTRY B (2015)
Entanglement network formed in miscible PLA/PMMA blends and its role in rheological and thermo-mechanical properties of the blends
Xiaoqiong Hao et al.
POLYMER (2015)
Dynamic mechanical properties of immiscible polymer systems with and without compatibilizer
Seno Jose et al.
POLYMER TESTING (2015)
Compatibilization strategies in poly(lactic acid)-based blends
Jian-Bing Zeng et al.
RSC ADVANCES (2015)
Supertough Polylactide Materials Prepared through In Situ Reactive Blending with PEG-Based Diacrylate Monomer
Huagao Fang et al.
ACS APPLIED MATERIALS & INTERFACES (2014)
Dynamically Vulcanized Biobased Polylactide/Natural Rubber Blend Material with Continuous Cross-Linked Rubber Phase
Yukun Chen et al.
ACS APPLIED MATERIALS & INTERFACES (2014)
Fully Biobased and Supertough Polylactide-Based Thermoplastic Vulcanizates Fabricated by Peroxide-Induced Dynamic Vulcanization and Interfacial Compatibilization
Guang-Chen Liu et al.
BIOMACROMOLECULES (2014)
Crosslinked bicontinuous biobased PLA/NR blends via dynamic vulcanization using different curing systems
Daosheng Yuan et al.
CARBOHYDRATE POLYMERS (2014)
A new approach in modeling of mechanical properties of binary phase polymeric blends
Esmail Sharifzadeh et al.
IRANIAN POLYMER JOURNAL (2014)
Miscible Blends of Polylactide and Poly(methyl methacrylate): Morphology, Structure, and Thermal Behavior
Maurizio Canetti et al.
JOURNAL OF POLYMER SCIENCE PART B-POLYMER PHYSICS (2014)
In situ formed crosslinked polyurethane toughened polylactide
Guang-Chen Liu et al.
POLYMER CHEMISTRY (2014)
Super-tough poly(L-lactide)/crosslinked polyurethane blends with tunable impact toughness
Yi-Song He et al.
RSC ADVANCES (2014)
Toughening of poly(L-lactide) with poly(epsilon-caprolactone): Combined effects of matrix crystallization and impact modifier particle size
Hongwei Bai et al.
POLYMER (2013)
Synthesis and Remarkable Efficacy of Model Polyethylene-graft-poly(methyl methacrylate) Copolymers as Compatibilizers in Polyethylene/Poly(methyl methacrylate) Blends
Yuewen Xu et al.
MACROMOLECULES (2012)
Modification of Chlorinated Poly(propylene) via Atom Transfer Radical Graft Copolymerization of 2-Ethylhexyl Acrylate: A Brush-like Graft Copolymer
Dhruba J. Haloi et al.
MACROMOLECULAR CHEMISTRY AND PHYSICS (2011)
Tuning Polymer Blends to Cocontinuous Morphology by Asymmetric Diblock Copolymers as the Surfactants
Gongwei Pu et al.
MACROMOLECULES (2011)
Improvement in Toughness and Crystallization of Poly(L-lactic acid) by Melt Blending with Poly(epichlorohydrin-co-ethylene oxide)
Kunyu Zhang et al.
POLYMER ENGINEERING AND SCIENCE (2011)
Toughening of polylactide with natural rubber grafted with poly(butyl acrylate)
Chunmei Zhang et al.
POLYMER INTERNATIONAL (2011)
An overview of the recent developments in polylactide (PLA) research
K. Madhavan Nampoothiri et al.
BIORESOURCE TECHNOLOGY (2010)
Poly(lactic acid) modifications
Rahul M. Rasal et al.
PROGRESS IN POLYMER SCIENCE (2010)
Physical and Mechanical Properties of Poly(methyl methacrylate)-Grafted Natural Rubber Synthesized by Methyl Methacrylate Photopolymerization Initiated by N,N-Diethyldithiocarbamate Functions Previously Created on Natural Rubber Chains
D. Derouet et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2009)
Preparation and properties of biodegradable poly(lactic acid)/poly(butylene adipate-co-terephthalate) blend with glycidyl methacrylate as reactive processing agent
Naiwen Zhang et al.
JOURNAL OF MATERIALS SCIENCE (2009)
Co-Continuous Polymeric Nanostructures via Simple Melt Mixing of PS/PMMA
Gongwei Pu et al.
MACROMOLECULAR RAPID COMMUNICATIONS (2009)
Nucleation Enhancement Effect in Poly(L-lactide) (PLLA)/Poly(ε-caprolactone) (PCL) Blend Induced by Locally Activated Chain Mobility Resulting from Limited Miscibility
Fuji Sakai et al.
MACROMOLECULES (2009)
Super-tough poly(lactic acid) materials: Reactive blending with ethylene copolymer
Hideko I. Oyama
POLYMER (2009)
Toughening of polylactide by melt blending with linear low-density polyethylene
KS Anderson et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2003)
Thermal degradation mechanism and rate constants of the thermal degradation of poly(epichlorohydrin-co-ethylene oxide), deduced from pyrolysis-GC-MS studies
MA Soto-Oviedo et al.
POLYMER DEGRADATION AND STABILITY (2003)
Design and properties of co-continuous nanostructured polymers by reactive blending
H Pernot et al.
NATURE MATERIALS (2002)
Quantitative characterization of dispersed particle size, size distribution, and matrix ligament thickness in polypropylene blended with metallocene ethylene-octene copolymers
K Premphet et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2001)
Brittle-tough transition in elastomer toughening thermoplastics: effects of the elastomer stiffness
W Jiang et al.
POLYMER (2001)
Dynamic mechanical response of polymer networks
SF Edwards et al.
JOURNAL OF CHEMICAL PHYSICS (2000)