4.5 Article

Effects of high-temperature exposure on properties of lightweight geopolymer foams incorporating diatomite powders

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Materials Science, Ceramics

3D printing of dense and porous alkali-activated refractory wastes via Direct Ink Writing (DIW)

Bartolomeo Coppola et al.

Summary: Alkali-activated pastes prepared from refractory wastes were successfully 3D-printed using two different aluminosilicates, achieving high mechanical properties through optimization of rheological parameters and generation of hierarchically porous structures with PMMA beads. The addition of PMMA beads allowed for the creation of macroporous samples without compromising mechanical properties.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2021)

Review Construction & Building Technology

Basic performances and potential research problems of strain hardening geopolymer composites: A critical review

Bang-Cheng Lyu et al.

Summary: Researchers have been working on changing concrete properties from brittleness to ductility and toughness, with strain hardening cementitious composites and geopolymer composites providing potential solutions. However, differences in reaction mechanisms, chemical compositions, and microstructures between geopolymer and Portland-cement systems may affect the performance of composites.

CONSTRUCTION AND BUILDING MATERIALS (2021)

Article Construction & Building Technology

Enhancement of strengths of high-calcium fly ash geopolymer containing borax with rice husk ash

Peem Nuaklong et al.

Summary: Incorporating rice husk ash led to an improvement in compressive strength of high-calcium fly ash geopolymer modified with borax, while using borax instead of sodium silicate resulted in decreased strength. The decrease in strength when using borax was attributed to the increase in crystalline nature of reaction products caused by lower Si/Al ratios in the gel phases formed.

JOURNAL OF BUILDING ENGINEERING (2021)

Review Environmental Sciences

Review on pollution damage costs accounting

Yashuang Feng et al.

Summary: This review examines the application of damage cost accounting to pollution, categorizing existing models into static and dynamic ones and emphasizing the importance of spatial scales in the accounting process.

SCIENCE OF THE TOTAL ENVIRONMENT (2021)

Article Materials Science, Multidisciplinary

Mechanical strength and microstructure of metakaolin/volcanic ash-based geopolymer composites reinforced with reactive silica from rice husk ash (RHA)

Achile Nana et al.

Summary: By replacing metakaolin with different contents of volcanic ash and rice husk ash, the mechanical strength and physical properties of geopolymer composites can be improved. Optimal mechanical strength was obtained in composite samples containing 20% volcanic ash and 10% rice husk ash.

MATERIALIA (2021)

Article Materials Science, Ceramics

Alkali-activated refractory wastes exposed to high temperatures: development and characterization

Bartolomeo Coppola et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2020)

Article Materials Science, Ceramics

Mixed-conducting ceramic-carbonate membranes exhibiting high CO2/O2 permeation flux and stability at high temperatures

R. Ortega-Lugo et al.

JOURNAL OF ADVANCED CERAMICS (2020)

Article Materials Science, Multidisciplinary

Thermo-physical characterization of a metakaolin-based geopolymer incorporating calcium carbonate: A case study

A. Aboulayt et al.

MATERIALS CHEMISTRY AND PHYSICS (2020)

Article Materials Science, Multidisciplinary

Effects of high-temperature exposure on fractal dimension of fly-ash-based geopolymer composites

Young Cheol Choi et al.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2020)

Article Materials Science, Ceramics

Preparation and characterization of monodispersed spherical Fe2O3@SiO2 reddish pigments with core-shell structure

Shile Chen et al.

JOURNAL OF ADVANCED CERAMICS (2019)

Article Construction & Building Technology

Preparation and optimization of ultra-light and thermal insulative aerogel foam concrete

Pengwei Li et al.

CONSTRUCTION AND BUILDING MATERIALS (2019)

Article Green & Sustainable Science & Technology

A porous gradient geopolymer-based tube membrane with high PM removal rate for air pollution

Jie-ting Wang et al.

JOURNAL OF CLEANER PRODUCTION (2019)

Article Materials Science, Ceramics

Isotropic freeze casting of through-porous hydroxyapatite ceramics

Zhen Wu et al.

JOURNAL OF ADVANCED CERAMICS (2019)

Review Green & Sustainable Science & Technology

Use of geopolymer concrete for a cleaner and sustainable environment - A review of mechanical properties and microstructure

Amer Hassan et al.

JOURNAL OF CLEANER PRODUCTION (2019)

Article Green & Sustainable Science & Technology

Green synthesis of high porosity waste gangue microsphere/geopolymer composite foams via hydrogen peroxide modification

Shu Yan et al.

JOURNAL OF CLEANER PRODUCTION (2019)

Article Materials Science, Multidisciplinary

Preparation and characteristics of porous magnesium phosphate cement modified by diatomite

Xuezhu Luan et al.

MATERIALS CHEMISTRY AND PHYSICS (2019)

Article Construction & Building Technology

Mechanical properties and behaviour of high-strength plain and hybrid-fiber reinforced geopolymer composites under dynamic splitting tension

Musaad Zaheer Nazir Khan et al.

CEMENT & CONCRETE COMPOSITES (2019)

Article Construction & Building Technology

Influence of pore structure on the strength behavior of particle- and fiber-reinforced metakaolin-based geopolymer composites

Ange Therese Akono et al.

CEMENT & CONCRETE COMPOSITES (2019)

Review Construction & Building Technology

A critical review of geopolymer properties for structural fire-resistance applications

Mukund Lahoti et al.

CONSTRUCTION AND BUILDING MATERIALS (2019)

Article Materials Science, Ceramics

Design of lightweight metakaolin based geopolymer foamed with hydrogen peroxide

Svetlana Petlitckaia et al.

CERAMICS INTERNATIONAL (2019)

Article Green & Sustainable Science & Technology

Investigation of the strength development of cast-in-place geopolymer piles with heating systems

Wei Hu et al.

JOURNAL OF CLEANER PRODUCTION (2019)

Article Materials Science, Multidisciplinary

Use of residual diatomaceous earth as a silica source in geopolymer production

A. Font et al.

MATERIALS LETTERS (2018)

Article Construction & Building Technology

Preparation of blended geopolymer from red mud and coal gangue with mechanical co-grinding preactivation

Junjun Geng et al.

MATERIALS AND STRUCTURES (2017)

Article Materials Science, Multidisciplinary

One-step fabrication of novel porous and permeable self-supporting zeolite block from fly ash

Yi Liu et al.

MATERIALS LETTERS (2017)

Article Materials Science, Ceramics

Fully reacted high strength geopolymer made with diatomite as a fumed silica alternative

Cengiz Bagci et al.

CERAMICS INTERNATIONAL (2017)

Article Materials Science, Ceramics

Characterisation and properties of geopolymer composites. Part 2: Role of cordierite-mullite reinforcement

Suthee Wattanasiriwech et al.

CERAMICS INTERNATIONAL (2017)

Article Construction & Building Technology

Synthesis & characterization of natural soil based inorganic polymer foam for thermal insulations

Syed Farrukh Alam Zaidi et al.

CONSTRUCTION AND BUILDING MATERIALS (2017)

Article Materials Science, Ceramics

Effect of vacuum dehydration on gel structure and properties of metakaolin-based geopolymers

Wei Li et al.

CERAMICS INTERNATIONAL (2017)

Article Engineering, Multidisciplinary

Lightweight geopolymer-based hybrid materials

Giuseppina Roviello et al.

COMPOSITES PART B-ENGINEERING (2017)

Article Construction & Building Technology

Preparation of geopolymers from vanadium tailings by mechanical activation

Bo Wei et al.

CONSTRUCTION AND BUILDING MATERIALS (2017)

Article Construction & Building Technology

The influence of the stabilizing agent SDS on porosity development in alkali-activated fly-ash based foams

L. Korat et al.

CEMENT & CONCRETE COMPOSITES (2017)

Article Materials Science, Ceramics

High-porosity geopolymer membrane supports by peroxide route with the addition of egg white as surfactant

Chengying Bai et al.

CERAMICS INTERNATIONAL (2017)

Article Materials Science, Ceramics

Microstructure and mechanical properties of a metakaolinite-based geopolymer nanocomposite reinforced with carbon nanotubes

Saloumeh Mesgari Abbasi et al.

CERAMICS INTERNATIONAL (2016)

Article Materials Science, Ceramics

Effect of curing temperature and SiO2/K2O molar ratio on the performance of metakaolin-based geopolymers

Jingkun Yuan et al.

CERAMICS INTERNATIONAL (2016)

Article Green & Sustainable Science & Technology

Rice husk ash and spent diatomaceous earth as a source of silica to fabricate a geopolymeric binary binder

Johanna M. Mejia et al.

JOURNAL OF CLEANER PRODUCTION (2016)

Article Materials Science, Ceramics

In Situ Processing of Graphene/Leucite Nanocomposite Through Graphene Oxide/Geopolymer

Shu Yan et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2016)

Article Materials Science, Multidisciplinary

Characterization of geopolymer fly-ash based foams obtained with the addition of Al powder or H2O2 as foaming agents

V. Ducman et al.

MATERIALS CHARACTERIZATION (2016)

Article Construction & Building Technology

Mechanical, thermal insulation, thermal resistance and acoustic absorption properties of geopolymer foam concrete

Zuhua Zhang et al.

CEMENT & CONCRETE COMPOSITES (2015)

Article Materials Science, Ceramics

In situ fabrication and characterization of graphene/geopolymer composites

Shu Yan et al.

CERAMICS INTERNATIONAL (2015)

Review Construction & Building Technology

Geopolymer foam concrete: An emerging material for sustainable construction

Zuhua Zhang et al.

CONSTRUCTION AND BUILDING MATERIALS (2014)

Article Materials Science, Multidisciplinary

The effect of adding nano-SiO2 and nano-Al2O3 on properties of high calcium fly ash geopolymer cured at ambient temperature

Tanakorn Phoo-ngernkham et al.

MATERIALS & DESIGN (2014)

Article Materials Science, Ceramics

Thermal evolution and crystallization kinetics of potassium-based geopolymer

Peigang He et al.

CERAMICS INTERNATIONAL (2011)

Article Green & Sustainable Science & Technology

An environmental evaluation of geopolymer based concrete production: reviewing current research trends

G. Habert et al.

JOURNAL OF CLEANER PRODUCTION (2011)

Article Engineering, Environmental

Hydrothermal preparation of diatomaceous earth combined with calcium silicate hydrate gels

Hirotaka Maeda et al.

JOURNAL OF HAZARDOUS MATERIALS (2011)

Article Materials Science, Ceramics

Hierarchically Porous Ceramics from Diatomite Powders by Pulsed Current Processing

Farid Akhtar et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2009)

Article Construction & Building Technology

Thermal conductivity of cement composites containing rubber waste particles: Experimental study and modelling

A. Benazzouk et al.

CONSTRUCTION AND BUILDING MATERIALS (2008)

Article Chemistry, Applied

The adsorption of dyes from aqueous solution using diatomite

J. X. Lin et al.

JOURNAL OF POROUS MATERIALS (2007)

Article Materials Science, Multidisciplinary

Dissolution processes, hydrolysis and condensation reactions during geopolymer synthesis: Part II. High Si/Al ratio systems

K. Sagoe-Crentsil et al.

JOURNAL OF MATERIALS SCIENCE (2007)

Article Materials Science, Ceramics

Thermal evolution of metakaolin geopolymers: Part 1 - Physical evolution

Peter Duxson et al.

JOURNAL OF NON-CRYSTALLINE SOLIDS (2006)

Article Engineering, Environmental

Remediation of wastewater containing heavy metals using raw and modified diatomite

MAM Khraisheh et al.

CHEMICAL ENGINEERING JOURNAL (2004)