Topology Optimization for Design of a 3D-Printed Constant-Force Compliant Finger

A compliant constant-force mechanism is a passive force regulation device that can generate a nearly constant output force over a range of input or output displacements while without the use of sensors and feedback control. In topology synthesis of a compliant constant-force mechanism for a given input displacement range, the constant output force can be achieved by maintaining the output displacement to be nearly a same value while the input displacement increases. In order to further control the desired output displacement for the compliant constant-force mechanism before contacting the object, this article introduces a new composite objective function that can consider both the output force (with contact) and the output displacement (without contact) of the synthesized compliant mechanism. The sensitivity for the proposed objective function with respect to the element density is derived while considering the effect of nonlinearity in the large deformation condition. The proposed topology optimization method is used to design an innovative constant-force compliant finger, and its prototype is manufactured by 3-D printing using a flexible thermoplastic elastomer. The experimental results show the developed constant-force compliant finger can provide a nearly constant output force of 41.9 N over the input displacement ranging from 15 to 30 mm while the maximum and average force variations within the constant-force range are 2.2% and 0.9%, respectively. In addition, the developed constant-force compliant finger is used to design a three-fingered constant-force compliant gripper that can be used in robotic grasping of fragile objects.

Automated summary

This article introduces a new compliant constant-force mechanism and proposes a new composite objective function for optimizing its design. Experimental results show that the developed constant-force compliant finger can provide a nearly constant output force over a range of input displacements, leading to the design of a three-fingered constant-force compliant gripper for robotic grasping of fragile objects.