相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。Experimental investigation on thermal characteristics of hot surface by synthetic jet impingement
Pushpanjay K. Singh et al.
APPLIED THERMAL ENGINEERING (2020)
Numerical investigation of impingement heat transfer on smooth and roughened surfaces in a high-pressure turbine inner casing
Fujuan Tong et al.
INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2020)
Air Jet Impingement Cooling of Electronic Devices Using Additively Manufactured Nozzles
Beomjin Kwon et al.
IEEE TRANSACTIONS ON COMPONENTS PACKAGING AND MANUFACTURING TECHNOLOGY (2020)
Experimental and numerical study of inclined free surface liquid jet impingement
Kuldeep Baghel et al.
INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2020)
Low Frequency Pulsating Jet Impingement Boiling and Single Phase Heat Transfer
S. Abishek et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2020)
Comparison of the Heat Transfer Capabilities of Conventional Single- and Two-Phase Cooling Systems for an Electric Vehicle IGBT Power Module
Itxaso Aranzabal et al.
IEEE TRANSACTIONS ON POWER ELECTRONICS (2019)
Synthetic jet impingement heat transfer enhancement - A review
Gopal Krishan et al.
APPLIED THERMAL ENGINEERING (2019)
Experimental characterization and model validation of liquid jet impingement cooling using a high spatial resolution and programmable thermal test chip
T-W Wei et al.
APPLIED THERMAL ENGINEERING (2019)
Numerical study of free surface jet impingement on orthogonal surface
Kuldeep Baghel et al.
INTERNATIONAL JOURNAL OF MULTIPHASE FLOW (2019)
High-Efficiency Polymer-Based Direct Multi-Jet Impingement Cooling Solution for High-Power Devices
Tiwei Wei et al.
IEEE TRANSACTIONS ON POWER ELECTRONICS (2019)
Thermal modeling and comparative analysis of jet impingement liquid cooling for high power electronics
Ruikang Wu et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2019)
An immersed jet array impingement cooling device with distributed returns for direct body liquid cooling of high power electronics
Ruikang Wu et al.
APPLIED THERMAL ENGINEERING (2019)
Numerical study of submerged impinging jets for power electronics cooling
Massimo Sabato et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2019)
First Demonstration of a Low Cost/Customizable Chip Level 3D Printed Microjet Hotspot-Targeted Cooler for High Power Applications
T-W Wei et al.
2019 IEEE 69TH ELECTRONIC COMPONENTS AND TECHNOLOGY CONFERENCE (ECTC) (2019)
Direct Single Impinging Jet Cooling of a MOSFET Power Electronic Module
Johannes Joerg et al.
IEEE TRANSACTIONS ON POWER ELECTRONICS (2018)
Review of Thermal Packaging Technologies for Automotive Power Electronics for Traction Purposes
Justin Broughton et al.
JOURNAL OF ELECTRONIC PACKAGING (2018)
Heat transfer augmentation in solar thermal collectors using impinging air jets: A comprehensive review
Ranchan Chauhan et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2018)
Efficiency improvement of solar photovoltaic/solar air collectors by using impingement jets: A review
Rahul Nadda et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2018)
Thermal Management on IGBT Power Electronic Devices and Modules
Cheng Qian et al.
IEEE ACCESS (2018)
Heat transfer performance of boiling jet array impingement on micro-grooved surfaces
R. Jenkins et al.
EXPERIMENTAL THERMAL AND FLUID SCIENCE (2017)
Experimental study on pulsation behavior of the ultrasonic vibration-assisted abrasive waterjet
Rongguo Hou et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2017)
Self-similarity of heat transfer characteristics in laminar submerged and free-surface slot jet impingement
Malte Bieber et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2017)
Flow and thermal characteristics of jet impingement: comprehensive review
Anuj K. Shukla et al.
INTERNATIONAL JOURNAL OF HEAT AND TECHNOLOGY (2017)
Heat Management in Power Converters: From State of the Art to Future Ultrahigh Efficiency Systems
Eduardo Laloya et al.
IEEE TRANSACTIONS ON POWER ELECTRONICS (2016)
Effect of Prandtl number and rotation on vortex shedding behind a circular cylinder subjected to cross buoyancy at subcritical Reynolds number
Dipankar Chatterjee et al.
INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2016)
Experimental performance evaluation and modeling of jet impingement cooling for thermal management of photovoltaics
Haitham M. S. Bahaidarah
SOLAR ENERGY (2016)
A 3-D-Lumped Thermal Network Model for Long-Term Load Profiles Analysis in High-Power IGBT Modules
Amir Sajjad Bahman et al.
IEEE JOURNAL OF EMERGING AND SELECTED TOPICS IN POWER ELECTRONICS (2016)
Liquid Jet Impingement Cooling of a Silicon Carbide Power Conversion Module for Vehicle Applications
Kyle Gould et al.
IEEE TRANSACTIONS ON POWER ELECTRONICS (2015)
Recent developments of jet impingement nucleate boiling
Lu Qiu et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2015)
Effect of nozzle shape on jet impingement heat transfer from a circular cylinder
Dushyant Singh et al.
INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2015)
Experimental and Numerical Investigations on Steady and Unsteady Jet Impingement Cooling for High-Power Electronics
Radhamony Leena et al.
IEEE TRANSACTIONS ON COMPONENTS PACKAGING AND MANUFACTURING TECHNOLOGY (2015)
Heat transfer due to impinging double free circular jets
Mohamed A. Teamah et al.
ALEXANDRIA ENGINEERING JOURNAL (2015)
NUMERICAL SIMULATION OF TURBINE BLADE COOLING VIA JET IMPINGEMENT
Abdulla R. Al Ali et al.
CLEAN, EFFICIENT AND AFFORDABLE ENERGY FOR A SUSTAINABLE FUTURE (2015)
Thermo-fluid-dynamics of submerged jets impinging at short nozzle-to-plate distance: A review
Giovanni Maria Carlomagno et al.
EXPERIMENTAL THERMAL AND FLUID SCIENCE (2014)
Heat transfer under composite arrangement of pulsed and steady turbulent submerged multiple jets impinging on a flat surface
Javad Mohammadpour et al.
INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2014)
Lumped Parameter Modeling for Thermal Characterization of High-Power Modules
Marco Iachello et al.
IEEE TRANSACTIONS ON COMPONENTS PACKAGING AND MANUFACTURING TECHNOLOGY (2014)
INVESTIGATION OF HEAT TRANSFER PROCESSES INVOLVED LIQUID IMPINGEMENT JETS: A REVIEW
M. Molana et al.
BRAZILIAN JOURNAL OF CHEMICAL ENGINEERING (2013)
Computational modeling of vortex shedding in water cooling of 3D integrated electronics
Fabio Alfieri et al.
INTERNATIONAL JOURNAL OF HEAT AND FLUID FLOW (2013)
High-power electronics thermal management with intermittent multijet sprays
Miguel R. O. Panao et al.
APPLIED THERMAL ENGINEERING (2012)
Impingement-based high performance cooling configurations for automotive power converters
Pritish R. Panda et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2012)
Experimental investigation of flow boiling heat transfer of jet impingement on smooth and micro structured surfaces
Sidy Ndao et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2012)
Thermal Management of Power Inverter Modules at High Fluxes via Two-Phase Spray Cooling
Huseyin Bostanci et al.
IEEE TRANSACTIONS ON COMPONENTS PACKAGING AND MANUFACTURING TECHNOLOGY (2012)
Effect of a hybrid jet impingement/micro-channel cooling device on the performance of densely packed PV cells under high concentration
Jerome Barrau et al.
SOLAR ENERGY (2011)
Cooling Methods for High-Power Electronic Systems
Andrei Blinov et al.
ELECTRICAL CONTROL AND COMMUNICATION ENGINEERING (2011)
Thermal performance study of integrated cold plate with power module
Y. P. Zhang et al.
APPLIED THERMAL ENGINEERING (2009)
Evaporation-Enhanced, Dynamically Adaptive Air (Gas)-Cooled Heat Sink for Thermal Management of High Heat Dissipation Devices
Andrei G. Fedorov et al.
IEEE TRANSACTIONS ON COMPONENTS AND PACKAGING TECHNOLOGIES (2009)
A Thermal-Hydraulic Comparison of Liquid Microchannel and Impinging Liquid Jet Array Heat Sinks for High-Power Electronics Cooling
Anthony J. Robinson
IEEE TRANSACTIONS ON COMPONENTS AND PACKAGING TECHNOLOGIES (2009)
Two-Phase Spray Cooling of Hybrid Vehicle Electronics
Issam Mudawar et al.
IEEE TRANSACTIONS ON COMPONENTS AND PACKAGING TECHNOLOGIES (2009)
Multi-objective thermal design optimization and comparative analysis of electronics cooling technologies
Sidy Ndao et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2009)
Analysis of a Synthetic Jet-Based Electronic Cooling Module
Deepak Jagannatha et al.
NUMERICAL HEAT TRANSFER PART A-APPLICATIONS (2009)
An experimental investigation of free and submerged miniature liquid jet array impingement heat transfer
A. J. Robinson et al.
EXPERIMENTAL THERMAL AND FLUID SCIENCE (2007)
Spray cooling heat transfer: The state of the art
Jurigho Kim
INTERNATIONAL JOURNAL OF HEAT AND FLUID FLOW (2007)
Influence of a pulsation on heat transfer and flow structure in submerged impinging jets
Herbert Martin Hofmann et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2007)
Performance improvement of a power conversion module by liquid micro-jet impingement cooling
Avijit Bhunia et al.
IEEE TRANSACTIONS ON COMPONENTS AND PACKAGING TECHNOLOGIES (2007)
Microjet cooler with distributed returns
Govindarajan Natarajan et al.
HEAT TRANSFER ENGINEERING (2007)
Electronic cooling using synthetic jet impingement
Anna Pavlova et al.
JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME (2006)
Experimental and numerical investigation of single-phase heat transfer using a hybrid jet-impingement/micro-channel cooling scheme
MK Sung et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2006)
Effect of nozzle geometry on pressure drop and heat transfer in submerged jet arrays
A Royne et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2006)
Single-phase and two-phase cooling characteristics of upward-facing and downward-facing sprays
JR Rybicki et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2006)
Optimized heat transfer for high power electronic cooling using arrays of microjets
M Fabbri et al.
JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME (2005)
Micromachined jets for liquid impingement cooling of VLSI chips
EN Wang et al.
JOURNAL OF MICROELECTROMECHANICAL SYSTEMS (2004)
Fluid flow and heat transfer in air jet impingement in food processing
A Sarkar et al.
JOURNAL OF FOOD SCIENCE (2004)
Effects of spray characteristics on critical heat flux in subcooled water spray cooling
RH Chen et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2002)
Forced convection heat transfer enhancement using a self-oscillating impinging planar jet
C Camci et al.
JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME (2002)
Assessment of high-heat-flux thermal management schemes
I Mudawar
IEEE TRANSACTIONS ON COMPONENTS AND PACKAGING TECHNOLOGIES (2001)
分享论文
