☆ 4.7 Article

The computational modeling for the static analysis of axially functionally graded micro-cylindrical imperfect beam applying the computer simulation

ENGINEERING WITH COMPUTERS (2022)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Computer Science, Interdisciplinary Applications

Pull-in and freestanding instability of actuated functionally graded nanobeams including surface and stiffening effects

Rasha M. Abo-Bakr et al.

Summary: This paper presents a new solution technique for solving highly nonlinear integro-differential equations governing electrically actuated nanobeams made of functionally graded material. The proposed method combines the modified couple stress theory and Gurtin-Murdoch surface elasticity theory to capture the size effects of the nanoscale thin beam. Various nonlinearity factors are considered in the mathematical formulation. The resulting algebraic model provides means for obtaining critical performance parameters of nanobeam-based actuators.

ENGINEERING WITH COMPUTERS (2022)

添加到收藏夹

Article Computer Science, Interdisciplinary Applications

On the modeling of bending responses of graphene-reinforced higher order annular plate via two-dimensional continuum mechanics approach

Yuesong Li et al.

Summary: This research investigates the bending responses of FG-GPLRC plates and identifies the factors that influence the bending characteristics. It is found that the number of GPLs used for reinforcement and the radius ratio have significant effects on the normal and shear stresses of the structure.

ENGINEERING WITH COMPUTERS (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Frequency and buckling responses of a high-speed rotating fiber metal laminated cantilevered microdisk

Zhiyong Wang et al.

Summary: This article presents the amplitude and vibrational characteristics of a rotating fiber metal laminated microdisk. The current microstructure is modeled using a two-parameter viscoelastic foundation and the centrifugal and coriolis effects due to rotation are considered. The strains and stresses are determined using the third-order shear deformable theory and the nonlocal strain gradient theory is used to access size-effects. The boundary conditions are derived through governing equations of the laminated rotating microdisk using Hamilton's principle and solved using a numerical method based on the generalized differential quadrature method.

MECHANICS OF ADVANCED MATERIALS AND STRUCTURES (2022)

添加到收藏夹

Article Computer Science, Interdisciplinary Applications

Computer simulation via a couple of homotopy perturbation methods and the generalized differential quadrature method for nonlinear vibration of functionally graded non-uniform micro-tube

Xiaoping Huang et al.

Summary: This paper studies the impact of nonlinear modal analysis on the vibrational response of axially functionally graded truncated conical micro-scale tubes. Different cross sections, such as uniform, linear tapered, convex, and exponential sections, are considered for various applications. The results provide valuable insights for design and manufacture of micro-electro-mechanical systems (MEMS) by analyzing the effect of various cross sections and parameters on micro-tube frequency.

ENGINEERING WITH COMPUTERS (2022)

添加到收藏夹

Article Computer Science, Interdisciplinary Applications

Dynamic simulation of the ultra-fast-rotating sandwich cantilever disk via finite element and semi-numerical methods

Jinhui Wu et al.

Summary: The research focuses on the vibrational and amplitude behaviors of a sandwich spinning disk with a graphene nanoplatelets reinforced composite core. High-order shear deformable theory is used to calculate stresses and strains, and a computational method called generalized differential quadrature method is employed to solve the structure's boundary conditions. Matlab programming is used to explain the disk's vibrations, while ABAQUS software is used for 3-D finite element simulations. The frequency response of the system is found to be better in smaller radius ratios.

ENGINEERING WITH COMPUTERS (2022)

添加到收藏夹

Article Computer Science, Interdisciplinary Applications

Porosity-dependent vibration analysis of FG microplates embedded by polymeric nanocomposite patches considering hygrothermal effect via an innovative plate theory

Ehsan Arshid et al.

Summary: The study investigated the vibrational behavior of a three-layered sandwich microplate with functionally graded porous materials as core and piezoelectric nanocomposite materials as face sheets. By reinforcing the face sheets with carbon nanotubes, their properties can be changed, and equations of motion can be derived using innovative theoretical methods. Results show that an increase in CNTs' volume fraction improves mechanical properties and natural frequency, while the hygrothermal environment also has significant effects on the results.

ENGINEERING WITH COMPUTERS (2022)

添加到收藏夹

Article Computer Science, Interdisciplinary Applications

Application of shifted Chebyshev polynomial-based Rayleigh-Ritz method and Navier's technique for vibration analysis of a functionally graded porous beam embedded in Kerr foundation

Subrat Kumar Jena et al.

Summary: This study investigates the applicability of shifted Chebyshev polynomial-based Rayleigh-Ritz method and Navier's technique on the free vibration of functionally graded beams with uniformly distributed porosity, considering varying material properties along the thickness and embedding the beam in an elastic substrate. The use of shifted Chebyshev polynomials as shape functions ensures computational efficiency and avoids ill-conditioning, with various boundary conditions considered for parametric study. Validation through comparison with existing literature and a convergence study on natural frequencies are performed to examine the effectiveness and accuracy of the model.

ENGINEERING WITH COMPUTERS (2021)

添加到收藏夹

Article Mechanics

Three-dimensional frequency response of the CNT-Carbon-Fiber reinforced laminated circular/annular plates under initially stresses

M. S. H. Al-Furjan et al.

Summary: The frequency characteristics of circular/annular plates reinforced with multi-scale hybrid laminates nanocomposite are studied using state-space formulation based on 3D-elasticity theory. The properties of the plates change layer-by-layer with carbon nanotubes uniformly dispersed in each layer. Initial lateral stress and stacking sequence have significant effects on the frequency behavior of the composite structure.

COMPOSITE STRUCTURES (2021)

添加到收藏夹

Article Mechanics

Vibrational characteristics of a higher-order laminated composite viscoelastic annular microplate via modified couple stress theory

M. S. H. Al-Furjan et al.

Summary: This article investigates the vibrational characteristics of a laminated composite annular microplate using modified couple stress theory and Kelvin-Voight model. The non-classical governing equations are derived by adding higher-order stress tensors, and the results show that increasing the viscoelastic parameter does not affect the frequency of the microplate.

COMPOSITE STRUCTURES (2021)

添加到收藏夹

Article Mechanics

On the vibrations of the non-polynomial viscoelastic composite open-type shell under residual stresses

Zuocai Dai et al.

Summary: This paper investigates the mechanical behaviors of functionally graded graphene platelets reinforced composite on a non-polynomial viscoelastic substrate, and uses the differential quadrature method to study its frequency response. Results show that initial compressive stress can enhance system stability and improve energy absorption of the structure.

COMPOSITE STRUCTURES (2021)

添加到收藏夹

Article Engineering, Civil

Non-polynomial framework for stress and strain response of the FG-GPLRC disk using three-dimensional refined higher-order theory

M. S. H. Al-Furjan et al.

Summary: This article presents a non-polynomial framework for bending responses of functionally graded-graphene nanoplatelets composite reinforced disk and conducts a parametric study to investigate the effects of various factors on the bending characteristics. The results show that the relationship between GPL patterns and shear stress varies in different layers of the disk, and the structure exhibits the best behavior against sinusoidal loading pattern.

ENGINEERING STRUCTURES (2021)

添加到收藏夹

Article Computer Science, Interdisciplinary Applications

Geometrically nonlinear analysis of functionally graded shells using an edge-based smoothed MITC3 (ES-MITC3) finite elements

Quoc-Hoa Pham et al.

ENGINEERING WITH COMPUTERS (2020)

添加到收藏夹

Article Computer Science, Interdisciplinary Applications

Investigation of state vector computational solution on modeling of wave propagation through functionally graded nanocomposite doubly curved thick structures

M. Ghassabi et al.

ENGINEERING WITH COMPUTERS (2020)

添加到收藏夹

Article Engineering, Mechanical

Buckling analysis of functionally graded sandwich cylindrical micro/nanoshells based on the couple stress theory

Hamid Zeighampour et al.

JOURNAL OF SANDWICH STRUCTURES & MATERIALS (2019)

添加到收藏夹

Article Engineering, Civil

Buckling-restrained brace using round steel bar cores restrained by inner round steel tubes and outer square steel tube

Jhon Alexander Segura Mateus et al.

ENGINEERING STRUCTURES (2019)

添加到收藏夹

Article Computer Science, Interdisciplinary Applications

Nonlinear primary resonance of imperfect spiral stiffened functionally graded cylindrical shells surrounded by damping and nonlinear elastic foundation

Habib Ahmadi

ENGINEERING WITH COMPUTERS (2019)

添加到收藏夹

Article Computer Science, Interdisciplinary Applications

Galerkin's approach for buckling analysis of functionally graded anisotropic nanoplates/different boundary conditions

Behrouz Karami et al.

ENGINEERING WITH COMPUTERS (2019)

添加到收藏夹

Article Engineering, Mechanical

Mechanics of Fluid-Conveying Microtubes: Coupled Buckling and Post-Buckling

Ali Farajpour et al.

VIBRATION (2019)

添加到收藏夹

Article Mechanics

Buckling of nonuniform and axially functionally graded nonlocal Timoshenko nanobeams on Winkler-Pasternak foundation

Mouafo Teifouet Armand Robinson et al.

COMPOSITE STRUCTURES (2018)

添加到收藏夹

Article Engineering, Mechanical

Buckling of a slender rod confined in a circular tube: Theory, simulation, and experiment

Jia-Peng Liu et al.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2018)

添加到收藏夹

Article Mechanics

Post-Buckling Analysis of a Rod Confined in a Cylindrical Tube

Jia-Peng Liu et al.

JOURNAL OF APPLIED MECHANICS-TRANSACTIONS OF THE ASME (2018)

添加到收藏夹

Article Engineering, Multidisciplinary

Bending, buckling and vibration of small-scale tapered beams

Sundaramoorthy Rajasekaran et al.

INTERNATIONAL JOURNAL OF ENGINEERING SCIENCE (2017)

添加到收藏夹

Article Engineering, Manufacturing

Buckling in low pressure tube hydroforming

C. Nikhare et al.

JOURNAL OF MANUFACTURING PROCESSES (2017)

添加到收藏夹

Article Construction & Building Technology

Conceptual numerical investigation of all-steel Tube-in-Tube buckling restrained braces

Hamid Heidary-Torkamani et al.

JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH (2017)

添加到收藏夹

Article Materials Science, Multidisciplinary

Buckling Analysis of Axially Functionally Graded and Non-Uniform Beams Based on Timoshenko Theory

Yong Huang et al.

ACTA MECHANICA SOLIDA SINICA (2016)

添加到收藏夹

Article Mechanics

Size dependent vibro-buckling of rotating beam based on modified couple stress theory

M. R. Ilkhani et al.

COMPOSITE STRUCTURES (2016)

添加到收藏夹

Article Mechanics

Vibration behavior of a rotating non-uniform FG microbeam based on the modified couple stress theory and GDQEM

Navvab Shafiei et al.

COMPOSITE STRUCTURES (2016)

添加到收藏夹

Article Engineering, Multidisciplinary

Nonlinear vibration of axially functionally graded non-uniform nanobeams

Navvab Shafiei et al.

INTERNATIONAL JOURNAL OF ENGINEERING SCIENCE (2016)

添加到收藏夹

Article Mechanics

Post-buckling response of non-uniform cross-section bilaterally constrained beams

Pengcheng Jiao et al.

MECHANICS RESEARCH COMMUNICATIONS (2016)

添加到收藏夹

Article Engineering, Multidisciplinary

Nonlinear bending and post-buckling of extensible microscale beams based on modified couple stress theory

Yong-Gang Wang et al.

APPLIED MATHEMATICAL MODELLING (2015)

添加到收藏夹

Article Engineering, Multidisciplinary

Buckling analysis of size-dependent nonlinear beams based on a nonlocal strain gradient theory

Li Li et al.

INTERNATIONAL JOURNAL OF ENGINEERING SCIENCE (2015)

添加到收藏夹

Article Multidisciplinary Sciences

Buckling of Microtubules on a 2D Elastic Medium

Arif Md. Rashedul Kabir et al.

SCIENTIFIC REPORTS (2015)

添加到收藏夹

Article Mechanics

A unified higher order beam theory for buckling of a functionally graded microbeam embedded in elastic medium using modified couple stress theory

M. Simsek et al.

COMPOSITE STRUCTURES (2013)

添加到收藏夹

Article Engineering, Multidisciplinary

Size dependent buckling analysis of functionally graded micro beams based on modified couple stress theory

A. Nateghi et al.

APPLIED MATHEMATICAL MODELLING (2012)

添加到收藏夹

Article Mechanics

Predicting buckling behavior of microtubules based on an atomistic-continuum model

Ping Xiang et al.

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2011)

添加到收藏夹

Article Chemistry, Multidisciplinary

Buckling Analysis of Cantilever Carbon Nanotubes Using the Strain Gradient Elasticity and Modified Couple Stress Theories

B. Akgoz et al.

JOURNAL OF COMPUTATIONAL AND THEORETICAL NANOSCIENCE (2011)

添加到收藏夹

Article Materials Science, Multidisciplinary

Circumferential buckling instability of a growing cylindrical tube

D. E. Moulton et al.

JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2011)

添加到收藏夹

Article Materials Science, Multidisciplinary

Microstructure-dependent couple stress theories of functionally graded beams

J. N. Reddy

JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2011)

添加到收藏夹

Article Engineering, Mechanical

Energy absorption of an axially crushed square tube with a buckling initiator

X. W. Zhang et al.

INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2009)

添加到收藏夹

Article Nanoscience & Nanotechnology

Determination of the elastic modulus of micro- and nanowires/tubes using a buckling-based metrology

Yan-Ping Cao et al.

SCRIPTA MATERIALIA (2009)

添加到收藏夹

Article Physics, Multidisciplinary

Buckling and force propagation along intracellular microtubules

Moumita Das et al.

EPL (2008)

添加到收藏夹

Article Physics, Multidisciplinary

Peristaltically induced transport of a MHD biviscosity fluid in a non-uniform tube

N. T. M. Eldabe et al.

PHYSICA A-STATISTICAL MECHANICS AND ITS APPLICATIONS (2007)

添加到收藏夹

Article Engineering, Multidisciplinary

Nonlocal theories for bending, buckling and vibration of beams

J. N. Reddy

INTERNATIONAL JOURNAL OF ENGINEERING SCIENCE (2007)

添加到收藏夹

Article Engineering, Mechanical

Buckling of non-uniform beams by a direct functional perturbation method

Essam M. Totry et al.

PROBABILISTIC ENGINEERING MECHANICS (2007)

添加到收藏夹

Article Physics, Fluids & Plasmas

Orthotropic elastic shell model for buckling of microtubules

C. Y. Wang et al.

PHYSICAL REVIEW E (2006)

添加到收藏夹

Article Physics, Applied

Buckling analysis of micro- and nano-rods/tubes based on nonlocal Timoshenko beam theory

C. M. Wang et al.

JOURNAL OF PHYSICS D-APPLIED PHYSICS (2006)

添加到收藏夹

Article Optics

Study of the buckling mechanism in laser tube forming

HS Hsieh et al.

OPTICS AND LASER TECHNOLOGY (2005)

添加到收藏夹

Article Mechanics

Couple stress based strain gradient theory for elasticity

F Yang et al.

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2002)

添加到收藏夹

Article Mechanics

Modified Lindstedt-Poincare methods for some strongly non-linear oscillations Part I: expansion of a constant

JH He

INTERNATIONAL JOURNAL OF NON-LINEAR MECHANICS (2002)

添加到收藏夹

Article Mechanics

Modified Lindstedt-Poincare methods for some strongly non-linear oscillations Part II: a new transformation

JH He

INTERNATIONAL JOURNAL OF NON-LINEAR MECHANICS (2002)

添加到收藏夹

Article Mechanics

Helical buckling of a tube in an inclined wellbore

NC Huang et al.

INTERNATIONAL JOURNAL OF NON-LINEAR MECHANICS (2000)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.