Maximising the efficiency of Menard pressuremeter testing in cohesive materials by a cookie-cutter drilling technique

Menard pressuremeter testing has been widely used in geotechnical engineering applications for 40 years and is an important technique in determining in-situ horizontal stress distributions. In this study, Menard pressuremeter testing is combined with a cookie-cutter insertion technique to determine horizontal stresses for a soft-rock in an operational Australian mine. The method presents an alternative to the Self-Bored Pressuremeter, with cookie-cutter drill rods allowing for sample recovery and further laboratory testing. The method accommodates for the presence of gravel and hard layered materials that present a risk of damage to cutting shoes of Self-Bored Pressuremeter devices. The combination of a sonic drill rig, coupled with the cookie cutter rods produces a close tolerance pocket resulting in pseudo self boring pressuremeter tests. The undrained shear strength, unload-reload shear modulus and in-situ horizontal stress are presented from pressuremeter tests conducted in the region for the first time. The undrained shear strength was observed in the range of 0.47-0.57 MPa, the unload-reload shear modulus between 17.43 and 18.25 MPa, the lift-off pressure in the range of 0.35-0.61 MPa. The K-0 of coal was equal to 1, with interseam materials ranging from 2.1 to 3.5. Results of the cookie-cutter insertion method are compared with conventional drilling methods, with the cookie-cutter insertion test providing results in good agreement with both advanced triaxial laboratory tests and FEM numerical analysis. Cookie-cutter pressuremeter tests were conducted on cohesive soils at Australia's second-largest open-pit mine, with pressuremeter test results presented for Victorian brown coal for the first time.

Automated summary

The combination of cookie-cutter insertion technique and sonic drill rig provides a new method for pressuremeter testing in soft rock, avoiding damage to traditional testing equipment in gravel and hard materials. This method allows for sample recovery and further laboratory testing.