相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。Influence of finite element model, load-sharing and load distribution on crack propagation path in spur gear drive
Rama Thirumurugan et al.
ENGINEERING FAILURE ANALYSIS (2020)
Experimental and numerical investigation on fatigue crack growth behavior of commercial pure titanium under I-II mixed mode loading at negative load ratios
Peng Zhang et al.
INTERNATIONAL JOURNAL OF FATIGUE (2020)
Investigation of the effect of load distribution along the face width and load sharing between the pairs in contact on the fracture parameters of the spur gear tooth with root crack
Thirumurugan Rama et al.
ENGINEERING FAILURE ANALYSIS (2019)
Optimization of Ventilation Spacer for Direct-Drive Permanent Magnet Wind Generator
Xiang Zhao et al.
ENERGIES (2019)
Three-dimensional mode-I/III fatigue crack propagation: Computational modeling and experiments
M. Faruk Yaren et al.
INTERNATIONAL JOURNAL OF FATIGUE (2019)
A novel test system for mixed mode-I/II/III fracture tests - Part 1: Modeling and numerical analyses
A. O. Ayhan et al.
ENGINEERING FRACTURE MECHANICS (2019)
Calculation of mesh stiffness of spur gears considering complex foundation types and crack propagation paths
Kangkang Chen et al.
MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2019)
Geometrical complexity and crack trajectory based fatigue life prediction for a spur gear having tooth root crack
Vivek Patil et al.
ENGINEERING FAILURE ANALYSIS (2019)
A novel test system for mixed mode-I/II/III fracture tests - Part 2: Experiments and criterion development
O. Demir et al.
ENGINEERING FRACTURE MECHANICS (2019)
Evaluation of mixed mode-I/II criteria for fatigue crack propagation using experiments and modeling
Oguzhan Demir et al.
CHINESE JOURNAL OF AERONAUTICS (2018)
Crack growth modeling in spur gear tooth and its effect on mesh stiffness using extended finite element method
Jay Govind Verma et al.
ENGINEERING FAILURE ANALYSIS (2018)
Meshing characteristics of spur gear pair under different crack types
Zhanwei Li et al.
ENGINEERING FAILURE ANALYSIS (2017)
A new specimen for mixed mode-I/II fracture tests: Modeling, experiments and criteria development
Oguzhan Demir et al.
ENGINEERING FRACTURE MECHANICS (2017)
Approximate equations for the meshing stiffness and the load sharing ratio of spur gears including hertzian effects
Miryam B. Sanchez et al.
MECHANISM AND MACHINE THEORY (2017)
Robust and efficient validation of the linear hexahedral element
A. Johnen et al.
26TH INTERNATIONAL MESHING ROUNDTABLE, (IMR26 2017) (2017)
Quadrilateral and hexahedral mesh generation based on surface foliation theory
Na Lei et al.
COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2017)
The effects of spur gear tooth spatial crack propagation on gear mesh stiffness
Wennian Yu et al.
ENGINEERING FAILURE ANALYSIS (2015)
Fault features analysis of cracked gear considering the effects of the extended tooth contact
Hui Ma et al.
ENGINEERING FAILURE ANALYSIS (2015)
Three dimensional fatigue crack initiation and propagation analysis of a gear tooth under various load conditions and fatigue life extension with boron/epoxy patches
Mir Ali Ghaffari et al.
ENGINEERING FRACTURE MECHANICS (2015)
Surface cracks in finite thickness plates under thermal and displacement-controlled loads - Part 2: Crack propagation
Mahmut Uslu et al.
ENGINEERING FRACTURE MECHANICS (2014)
Analytically evaluating the influence of crack on the mesh stiffness of a planetary gear set
Xihui Liang et al.
MECHANISM AND MACHINE THEORY (2014)
Automatic swept volume decomposition based on sweep directions extraction for hexahedral meshing
Haiyan Wu et al.
23RD INTERNATIONAL MESHING ROUNDTABLE (IMR23) (2014)
Crack growth modeling via 3D automatic adaptive mesh refinement based on modified-SPR technique
A. R. Khoei et al.
APPLIED MATHEMATICAL MODELLING (2013)
Improving mesh stiffness calculation of cracked gears for the purpose of vibration-based fault analysis
Omar D. Mohammed et al.
ENGINEERING FAILURE ANALYSIS (2013)
Fatigue crack growth in real structures
H. A. Richard et al.
INTERNATIONAL JOURNAL OF FATIGUE (2013)
A model for the study of meshing stiffness in spur gear transmissions
A. Fernandez del Rincon et al.
MECHANISM AND MACHINE THEORY (2013)
Mesh stiffness calculation of a spur gear pair with tooth profile modification and tooth root crack
Zaigang Chen et al.
MECHANISM AND MACHINE THEORY (2013)
Simulation of three-dimensional fatigue crack propagation using enriched finite elements
Ali O. Ayhan
COMPUTERS & STRUCTURES (2011)
Dynamic simulation of spur gear with tooth root crack propagating along tooth width and crack depth
Zaigang Chen et al.
ENGINEERING FAILURE ANALYSIS (2011)
Crack insertion, meshing and fracture analysis of structures using tetrahedral finite elements
Ergun Nart et al.
EUROPEAN JOURNAL OF MECHANICS A-SOLIDS (2011)
Three-dimensional fracture analysis using tetrahedral enriched elements and fully unstructured mesh
Ali O. Ayhan
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2011)
Comparison of hexahedral and tetrahedral elements in finite element analysis of the foot and footwear
Srinivas C. Tadepalli et al.
JOURNAL OF BIOMECHANICS (2011)
Full-hexahedral structured meshing for image-based computational vascular modeling
Gianluca De Santis et al.
MEDICAL ENGINEERING & PHYSICS (2011)
Numerical Modelling of Crack Growth in a Gear Tooth Root
Srdan Podrug et al.
STROJNISKI VESTNIK-JOURNAL OF MECHANICAL ENGINEERING (2011)
Following Spur Gear Crack Propagation in the Tooth Foot by Finite Element Method
S. Zouari et al.
JOURNAL OF FAILURE ANALYSIS AND PREVENTION (2010)
3D adaptive finite element modeling of non-planar curved crack growth using the weighted superconvergent patch recovery method
H. Moslemi et al.
ENGINEERING FRACTURE MECHANICS (2009)
Investigation of crack propagation scatter in a gear tooth's root
Stanislav Pehan et al.
ENGINEERING FRACTURE MECHANICS (2008)
Development of fatigue crack growth in real structures
H. A. Richard et al.
ENGINEERING FRACTURE MECHANICS (2008)
Influence of different load models on gear crack path shapes and fatigue lives
S. Podrug et al.
FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2008)
Geometry-adapted hexahedral meshes improve accuracy of finite-element-method-based EEG source analysis
Carsten H. Wolters et al.
IEEE TRANSACTIONS ON BIOMEDICAL ENGINEERING (2007)
Computational approach to contact fatigue damage initiation analysis of gear teeth flanks
M. Sraml et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2007)
Fracture in a rubber-sprung railway wheel
HA Richard et al.
ENGINEERING FAILURE ANALYSIS (2005)
Review of mathematical and experimental models for determination of service life of gears
B Abersek et al.
ENGINEERING FRACTURE MECHANICS (2004)
Finite element remeshing in metal forming using hexahedral elements
ML Alves et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2003)
Finite element modeling of spur gearing fractures
VG Sfakiotakis et al.
FINITE ELEMENTS IN ANALYSIS AND DESIGN (2002)
A computational model for determination of service life of gears
S Glodez et al.
INTERNATIONAL JOURNAL OF FATIGUE (2002)
Stress intensity factors for three-dimensional surface cracks using enriched finite elements
AO Ayhan et al.
INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING (2002)
The generation of hexahedral meshes for assembly geometry: survey and progress
TJ Tautges
INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING (2001)
Consideration of moving tooth load in gear crook propagation predictions
DG Lewicki et al.
JOURNAL OF MECHANICAL DESIGN (2001)
Effect of crack closure on gear crack propagation
M Guagliano et al.
INTERNATIONAL JOURNAL OF FATIGUE (2001)
Simulating fatigue crack growth in spiral bevel gears
LE Spievak et al.
ENGINEERING FRACTURE MECHANICS (2001)