相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。Studies of Fracture Toughness in Concretes Containing Fly Ash and Silica Fume in the First 28 Days of Curing
Grzegorz Ludwik Golewski et al.
MATERIALS (2021)
The Beneficial Effect of the Addition of Fly Ash on Reduction of the Size of Microcracks in the ITZ of Concrete Composites under Dynamic Loading
Grzegorz Ludwik Golewski
ENERGIES (2021)
On the special construction and materials conditions reducing the negative impact of vibrations on concrete structures
Grzegorz Ludwik Golewski
MATERIALS TODAY-PROCEEDINGS (2021)
Strain field distribution of asphalt mortar using digital image processing
Chao Xing et al.
CONSTRUCTION AND BUILDING MATERIALS (2020)
Surface topography analysis based on fatigue fractures obtained with bending of the 2017A-T4 alloy
Wojciech Macek et al.
MEASUREMENT (2020)
The use of digital image correlation for identifying failure characteristics of cross-laminated timber under transverse loading
Satheeskumar Navaratnam et al.
MEASUREMENT (2020)
Mechanical properties and prediction of fracture parameters of geopolymer/alkali-activated mortar modified with PVA fiber and nano-SiO2
Peng Zhang et al.
CERAMICS INTERNATIONAL (2020)
Energy Savings Associated with the Use of Fly Ash and Nanoadditives in the Cement Composition
Grzegorz Ludwik Golewski
ENERGIES (2020)
Digital image correlation and acoustic emission for damage analysis during tensile loading of open-hole flax laminates
Mohamed Habibi et al.
ENGINEERING FRACTURE MECHANICS (2020)
Natural Kenaf Fiber and LC3 Binder for Sustainable Fiber-Reinforced Cementitious Composite: A Review
Mohammad Hajmohammadian Baghban et al.
APPLIED SCIENCES-BASEL (2020)
A unified model for predicting the compressive strength of recycled aggregate concrete containing supplementary cementitious materials
Tianyu Xie et al.
JOURNAL OF CLEANER PRODUCTION (2020)
Recovery of residual anhydrous clinker in finely ground recycled concrete
Z. Prosek et al.
RESOURCES CONSERVATION AND RECYCLING (2020)
Investigation of the time elapsed effect on residual stress measurement in a composite plate by DIC method
M. Babaeeian et al.
OPTICS AND LASERS IN ENGINEERING (2020)
Full-field measurement and fracture and fatigue characterizations of asphalt concrete based on the SCB test and stereo-DIC
Fang Yuan et al.
ENGINEERING FRACTURE MECHANICS (2020)
Improvement of Strength Parameters of Cement Matrix with the Addition of Siliceous Fly Ash by Using Nanometric C-S-H Seeds
Bartosz Szostak et al.
ENERGIES (2020)
Changes in the Fracture Toughness under Mode II Loading of Low Calcium Fly Ash (LCFA) Concrete Depending on Ages
Grzegorz Ludwik Golewski
MATERIALS (2020)
Compressive performance evaluation of concrete confined by stirrups at elevated temperature using DIC technology
Yanhua Liu et al.
CONSTRUCTION AND BUILDING MATERIALS (2020)
The influence of microcrack width on the mechanical parameters in concrete with the addition of fly ash: Consideration of technological and ecological benefits
Grzegorz Ludwik Golewski
CONSTRUCTION AND BUILDING MATERIALS (2019)
Measurement of fracture mechanics parameters of concrete containing fly ash thanks to use of Digital Image Correlation (DIC) method
Grzegorz Ludwik Golewski
MEASUREMENT (2019)
Hybrid image processing approach for autonomous crack area detection and tracking using local digital image correlation results applied to single-fiber interfacial debonding
Ilyass Tabiai et al.
ENGINEERING FRACTURE MECHANICS (2019)
Sulfate attack resistance of sustainable concrete incorporating various industrial solid wastes
Zhuo Tang et al.
JOURNAL OF CLEANER PRODUCTION (2019)
Investigation of microstructure-property relantionships of magnesia-hercynite refractory composites by a refined digital image correlation technique
Imad Khlifi et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2019)
Experimental study on micro-damage identification in reinforced concrete beam with wavelet packet and DIC method
Binna Zhao et al.
CONSTRUCTION AND BUILDING MATERIALS (2019)
Estimation of the optimum content of fly ash in concrete composite based on the analysis of fracture toughness tests using various measuring systems
Grzegorz Ludwik Golewski
CONSTRUCTION AND BUILDING MATERIALS (2019)
Evaluation of Interfacial Fracture Toughness and Interfacial Shear Strength of Typha Spp. Fiber/Polymer Composite by Double Shear Test Method
Ikramullah et al.
MATERIALS (2019)
Effects of Fineness and Dosage of Fly Ash on the Fracture Properties and Strength of Concrete
Chung-Hao Wu et al.
APPLIED SCIENCES-BASEL (2019)
A novel specific requirements for materials used in reinforced concrete composites subjected to dynamic loads
Grzegorz Ludwik Golewski
COMPOSITE STRUCTURES (2019)
Properties of recycled concrete aggregates strengthened by different types of pozzolan slurry
Wafaa Mohamed Shaban et al.
CONSTRUCTION AND BUILDING MATERIALS (2019)
Strength and transport characteristics of volcanic pumice powder based high strength concrete
Abdullah M. Zeyad et al.
CONSTRUCTION AND BUILDING MATERIALS (2019)
A novel study for the estimation of crack propagation in concrete using machine learning algorithms
Gokhan Bayar et al.
CONSTRUCTION AND BUILDING MATERIALS (2019)
Mechanical and Ultrasonic Testing of Self-Compacting Concrete
Hongbo Li et al.
ENERGIES (2019)
Green Concrete: By-Products Utilization and Advanced Approaches
Ahmed Al-Mansour et al.
SUSTAINABILITY (2019)
Impact of silica fume, fly ash, and metakaolin on the thickness and strength of the ITZ in concrete
V. Nezerka et al.
CEMENT & CONCRETE COMPOSITES (2019)
Fly ash and slag
Zbigniew Giergiczny
CEMENT AND CONCRETE RESEARCH (2019)
Sustainable CFRP-reinforced recycled concrete for cleaner eco-friendly construction
L. W. Zhang et al.
JOURNAL OF CLEANER PRODUCTION (2019)
The Development of Nanoalumina-Based Cement Mortars for Overlay Applications in Concrete Floors
Jacek Szymanowski et al.
MATERIALS (2019)
Deterioration of mode II fracture toughness, compressive strength and elastic modulus of concrete under the environment of acid rain and cyclic wetting-drying
Changlin Zhou et al.
CONSTRUCTION AND BUILDING MATERIALS (2019)
Petrographic and Mechanical Characteristics of Concrete Produced by Different Type of Recycled Materials
Petros Petrounias et al.
GEOSCIENCES (2019)
COMPARATIVE STUDY AND EMPIRICAL MODELLING OF PULVERIZED COCONUT SHELL, PERIWINKLE SHELL AND PALM KERNEL SHELL AS A POZZOLANS IN CONCRETE
Efe Ewaen Ikponmwosa et al.
ACTA POLYTECHNICA (2019)
A failure analysis of concrete composites incorporating fly ash during torsional loading
T. Sadowski et al.
COMPOSITE STRUCTURES (2018)
Effect of curing time on the fracture toughness of fly ash concrete composites
Grzegorz Ludwik Golewski
COMPOSITE STRUCTURES (2018)
Crack monitoring in historical masonry with distributed strain and acoustic emission sensing techniques
Els Verstrynge et al.
CONSTRUCTION AND BUILDING MATERIALS (2018)
Green Concrete mix using solid waste and nanoparticles as alternatives - A review
Vinita Vishwakarma et al.
CONSTRUCTION AND BUILDING MATERIALS (2018)
Influence of the PVA fibers and SiO2 NPs on the structural properties of fly ash based sustainable geopolymer
Shilang Xu et al.
CONSTRUCTION AND BUILDING MATERIALS (2018)
Acoustic emission characteristics of fracture modes in masonry materials
G. Livitsanos et al.
CONSTRUCTION AND BUILDING MATERIALS (2018)
Mechanical and fracture properties of concrete reinforced with recycled and industrial steel fibers using Digital Image Correlation technique and X-ray micro computed tomography
Lukasz Skarzynski et al.
CONSTRUCTION AND BUILDING MATERIALS (2018)
Effects of marble powder on the properties of the air-cured blended cement paste
Nadhir Toubal Seghir et al.
JOURNAL OF CLEANER PRODUCTION (2018)
Deformation analysis of shear band in granular materials via a robust plane shear test and numerical simulation
Dong Lei et al.
POWDER TECHNOLOGY (2018)
Fracture study of concrete composites with synthetic fibers additive under modes I and III using ENDB specimen
M. R. M. Aliha et al.
CONSTRUCTION AND BUILDING MATERIALS (2018)
A unified approach for mix design of concrete containing supplementary cementitious materials based on reactivity moduli
T. Xie et al.
JOURNAL OF CLEANER PRODUCTION (2018)
Fracture toughness testing using photogrammetry and digital image correlation
Wen Hao Kan et al.
METHODSX (2018)
Global CO2 emissions from cement production
Robbie M. Andrew
EARTH SYSTEM SCIENCE DATA (2018)
Shear behaviour of prestressed precast SFRC girders
T. Soetens et al.
ENGINEERING STRUCTURES (2017)
Effects of glass fiber-reinforcement on the mechanical properties of coarse grained building stone
A. A. Pazeto et al.
CONSTRUCTION AND BUILDING MATERIALS (2017)
Experimental study on alarming of concrete micro-crack initiation based on wavelet packet analysis
Dong Lei et al.
CONSTRUCTION AND BUILDING MATERIALS (2017)
Research on local deformation property of asphalt mixture using digital image correlation
Chao Xing et al.
CONSTRUCTION AND BUILDING MATERIALS (2017)
The fracture toughness the KIIIc of concretes with F fly ash (FA) additive
G. L. Golewski et al.
CONSTRUCTION AND BUILDING MATERIALS (2017)
Non-destructive neural identification of the bond between concrete layers in existing elements
Lukasz Sadowski et al.
CONSTRUCTION AND BUILDING MATERIALS (2016)
Flexural cracking behavior of normal strength, high strength and high strength fiber concrete beams, using Digital Image Correlation technique
M. Hamrat et al.
CONSTRUCTION AND BUILDING MATERIALS (2016)
Cement industry greenhouse gas emissions - management options and abatement cost
Raili Kajaste et al.
JOURNAL OF CLEANER PRODUCTION (2016)
Reducing greenhouse gasses emissions by fostering the deployment of alternative raw materials and energy sources in the cleaner cement manufacturing process
Hrvoje Mikulcic et al.
JOURNAL OF CLEANER PRODUCTION (2016)
Fracture behavior of fly ash concrete containing silica fume
Peng Zhang et al.
STRUCTURAL ENGINEERING AND MECHANICS (2016)
Effect of Prefabricated Crack Length on Fracture Toughness and Fracture Energy of Fly Ash Concrete Reinforced by Nano-SiO2 and Fibers
P. Zhang et al.
IRANIAN JOURNAL OF SCIENCE AND TECHNOLOGY-TRANSACTIONS OF CIVIL ENGINEERING (2016)
Investigation of the rate dependence of fracture propagation in rocks using digital image correlation (DIC) method
G. Gao et al.
ENGINEERING FRACTURE MECHANICS (2015)
Crack closure effects during low cycle fatigue propagation in line pipe steel: An analysis with digital image correlation
S. Rabbolini et al.
ENGINEERING FRACTURE MECHANICS (2015)
Fracture examination in concrete through combined digital image correlation and acoustic emission techniques
Syed Yasir Alam et al.
CONSTRUCTION AND BUILDING MATERIALS (2014)
The performance of Fly ash and Metakaolin concrete at elevated temperatures
Abid Nadeem et al.
CONSTRUCTION AND BUILDING MATERIALS (2014)
An analysis of shear fracture toughness KIIc and microstructure in concretes containing fly-ash
G. L. Golewski et al.
CONSTRUCTION AND BUILDING MATERIALS (2014)
The technique of digital image correlation to identify defects in glass structures
Emanuela Speranzini et al.
STRUCTURAL CONTROL & HEALTH MONITORING (2014)
Experimental investigation of mixed-mode-I/II fracture in polymer mortars using digital image correlation method
L. C. S. Nunes et al.
LATIN AMERICAN JOURNAL OF SOLIDS AND STRUCTURES (2014)
Non-destructive investigation of corrosion current density in steel reinforced concrete by artificial neural networks
L. Sadowski
ARCHIVES OF CIVIL AND MECHANICAL ENGINEERING (2013)
Mechanical behavior of an assembly of wood-geopolymer-earth bricks
F. Gouny et al.
CONSTRUCTION AND BUILDING MATERIALS (2013)
Experimental validation of concrete crack identification and location with acoustic emission method
B. Goszczynska et al.
ARCHIVES OF CIVIL AND MECHANICAL ENGINEERING (2012)
Monitoring size effect on crack opening in concrete by digital image correlation
S. Y. Alam et al.
EUROPEAN JOURNAL OF ENVIRONMENTAL AND CIVIL ENGINEERING (2012)
Experimental investigation and numerical modeling fracture processes under Mode II in concrete composites containing fly-ash additive at early age
Grzegorz L. Golewski et al.
ADVANCED MATERIALS AND STRUCTURES IV (2012)
Supplementary cementitious materials
Barbara Lothenbach et al.
CEMENT AND CONCRETE RESEARCH (2011)
Use of acoustic emission and X-ray computed tomography for damage evaluation of freeze-thawed concrete
Tetsuya Suzuki et al.
CONSTRUCTION AND BUILDING MATERIALS (2010)
Digital Image Correlation
Nick McCormick et al.
MATERIALS TODAY (2010)
Strength, porosity and corrosion resistance of ternary blend Portland cement, rice husk ash and fly ash mortar
P. Chindaprasirt et al.
CONSTRUCTION AND BUILDING MATERIALS (2008)
About the analysis of microcracking in concrete
E Ringot et al.
CEMENT & CONCRETE COMPOSITES (2001)
Cements of yesterday and today -: Concrete of tomorrow
PC Aïtcin
CEMENT AND CONCRETE RESEARCH (2000)
分享论文
