相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。In-situ effect in cross-ply laminates under various loading conditions analyzed with hybrid macro/micro-scale computational models
Qingping Sun et al.
COMPOSITE STRUCTURES (2021)
Experimental and computational analysis of structure-property relationship in carbon fiber reinforced polymer composites fabricated by selective laser sintering
Haibin Tang et al.
COMPOSITES PART B-ENGINEERING (2021)
An integrated computational materials engineering framework to analyze the failure behaviors of carbon fiber reinforced polymer composites for lightweight vehicle applications
Qingping Sun et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2021)
Meso-scale modeling and damage analysis of carbon/epoxy woven fabric composite under in-plane tension and compression loadings
Guowei Zhou et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2021)
Experimental investigation on the effects of fabric architectures on mechanical and damage behaviors of carbon/epoxy woven composites
Guowei Zhou et al.
COMPOSITE STRUCTURES (2021)
Crushing behaviors of unidirectional carbon fiber reinforced plastic composites under dynamic bending and axial crushing loading
Guowei Zhou et al.
INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2020)
Effects of fabric architectures on mechanical and damage behaviors in carbon/epoxy woven composites under multiaxial stress states
Guowei Zhou et al.
POLYMER TESTING (2020)
Experimental investigations of bolted, adhesively bonded and hybrid bolted/bonded single-lap joints in composite laminates
Xin Li et al.
MATERIALS TODAY COMMUNICATIONS (2020)
Correlation Between Failure and Local Material Property in Chopped Carbon Fiber Chip-Reinforced Sheet Molding Compound Composites under Tensile Load
Haibin Tang et al.
POLYMER COMPOSITES (2019)
Failure criteria of unidirectional carbon fiber reinforced polymer composites informed by a computational micromechanics model
Qingping Sun et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2019)
On cohesive element parameters and delamination modelling
X. Lu et al.
ENGINEERING FRACTURE MECHANICS (2019)
Failure mechanisms of cross-ply carbon fiber reinforced polymer laminates under longitudinal compression with experimental and computational analyses
Qingping Sun et al.
COMPOSITES PART B-ENGINEERING (2019)
R-curve behaviour of the mixed-mode I/II delamination in carbon/epoxy laminates with unidirectional and multidirectional interfaces
Yu Gong et al.
COMPOSITE STRUCTURES (2019)
Composite Laminate Delamination Simulation and Experiment: A Review of Recent Development
Ala Tabiei et al.
APPLIED MECHANICS REVIEWS (2018)
Multi-scale computational analysis of unidirectional carbon fiber reinforced polymer composites under various loading conditions
Qingping Sun et al.
COMPOSITE STRUCTURES (2018)
Modelling and simulation methodology for unidirectional composite laminates in a Virtual Test Lab framework
O. Falco et al.
COMPOSITE STRUCTURES (2018)
Compressive test and numerical simulation of center-notched composite laminates with different crack configurations
Ge Mingming et al.
POLYMER COMPOSITES (2017)
On the relationship between failure mechanism and compression after impact (CAI) strength in composites
M. R. Abir et al.
COMPOSITE STRUCTURES (2017)
Numerical simulation of progressive damage and failure in composite laminates using XFEM/CZM coupled approach
R. Higuchi et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2017)
Interlaminar fracture of CF/EP composite containing a dual-component microencapsulated self-healant
Habibah Ghazali et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2016)
Progressive damage modeling of open-hole composite laminates under compression
Z. C. Su et al.
COMPOSITE STRUCTURES (2015)
Modelling impact damage in composite laminates: A simulation of intra- and inter-laminar cracking
Y. Shi et al.
COMPOSITE STRUCTURES (2014)
Fracture mechanical investigations and cohesive zone failure modelling on automotive composites
Stephan Marzi et al.
COMPOSITE STRUCTURES (2014)
Modelling complex progressive failure in notched composite laminates with varying sizes and stacking sequences
M. Ridha et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2014)
Measurement of cohesive laws for interlaminar failure of CFRP
D. Svensson et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2014)
Influence of the stacking sequence and crack velocity on fracture toughness of woven composite laminates in mode I
P. Navarro et al.
ENGINEERING FRACTURE MECHANICS (2014)
Validation of low velocity impact modelling on different stacking sequences of CFRP laminates and influence of fibre failure
N. Hongkarnjanakul et al.
COMPOSITE STRUCTURES (2013)
Finite element modeling of mode I delamination growth in laminated DCB specimens with R-curve effects
M. Heidari-Rarani et al.
COMPOSITES PART B-ENGINEERING (2013)
Influence of cut-out hole on multi-layer Kevlar-29/epoxy composite laminated plates
A. R. Abu Talib et al.
MATERIALS & DESIGN (2013)
Characterization of crack propagation in mode I delamination of multidirectional CFRP laminates
T. A. Sebaey et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2012)
Enhancing interlaminar fracture characteristics of woven CFRP prepreg composites through CNT dispersion
Sunil C. Joshi et al.
JOURNAL OF COMPOSITE MATERIALS (2012)
Influence of the Matrix Type on the Mode I Fracture of Carbon-Epoxy Composites Under Dynamic Delamination
A. Argueelles et al.
EXPERIMENTAL MECHANICS (2011)
Use of the tapered double-cantilever beam geometry for fracture toughness measurements and its application to the quantification of self-healing
E. N. Brown
JOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN (2011)
Mesh-independent modeling of both distributed and discrete matrix cracking in interaction with delamination in composites
F. P. van der Meer et al.
ENGINEERING FRACTURE MECHANICS (2010)
An experimental and numerical investigation into the damage mechanisms in notched composites
S. R. Hallett et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2009)
Characterizing delamination of fibre composites by mixed mode cohesive laws
Bent F. Sorensen et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2009)
Analysis of a new specimen for mixed mode fracture tests on brittle materials
M. R. Ayatollahi et al.
ENGINEERING FRACTURE MECHANICS (2009)
Mixed mode I plus II interlaminar fracture of carbon/epoxy laminates
A. B. Pereira et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2008)
Prediction of size effects in notched laminates using continuum damage mechanics
P. P. Camanho et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2007)
Application of the effective crack method to mode I and mode II interlaminar fracture of carbon/epoxy unidirectional laminates
A. B. de Morais et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2007)
A damage model for the simulation of delamination in advanced composites under variable-mode loading
A. Turon et al.
MECHANICS OF MATERIALS (2006)
Analysis of the mixed-mode end load split delamination test
N. Blanco et al.
COMPOSITE STRUCTURES (2006)
Influence of intralaminar cracking on the apparent interlaminar mode I fracture toughness of cross-ply laminates
MFSF de Moura et al.
FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2004)
Dependence of fracture toughness of composite laminates on interface ply orientations and delamination growth direction
J Andersons et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2004)
Experimental and numerical investigation of the tension and compression strength of un-notched and notched quasi-isotropic laminates
J Wang et al.
COMPOSITE STRUCTURES (2004)
Four-point bend interlaminar shear testing of uni- and multi-directional carbon/epoxy composite systems
P Feraboli et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2003)
Initiation and bifurcation mechanisms of cracks in multi-directional laminates
A Laksimi et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2000)
分享论文
