相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。Pressure drop analysis on the positive half-cell of a cerium redox flow battery using computational fluid dynamics: Mathematical and modelling aspects of porous media
Fernando F. Rivera et al.
FRONTIERS OF CHEMICAL SCIENCE AND ENGINEERING (2021)
Modelling and simulation of H2-H2O bubbly flow through a stack of three cells in a pre-pilot filter press electrocoagulation reactor
Miguel A. Sandoval et al.
SEPARATION AND PURIFICATION TECHNOLOGY (2021)
Process intensification through the use of multifunctional reactors for PEMFC grade hydrogen production: Process design and simulation
Izurieta Eduardo M et al.
CHEMICAL ENGINEERING AND PROCESSING-PROCESS INTENSIFICATION (2020)
Mass transfer and hydrodynamic characterization of structured 3D electrodes for electrochemistry
Jonas Hereijgers et al.
CHEMICAL ENGINEERING JOURNAL (2020)
Theoretical analysis of mass transfer during anodic dissolution of tungsten rotating disk electrode in alkaline solutions
Vladimir M. Volgin et al.
ELECTROCHIMICA ACTA (2020)
Characterization of the reaction environment in flow reactors fitted with BDD electrodes for use in electrochemical advanced oxidation processes: A critical review
Oscar M. Cornejo et al.
ELECTROCHIMICA ACTA (2020)
CFD simulation of biphasic flow, mass transport and current distribution in a continuous rotating cylinder electrode reactor for electrocoagulation process
A. Daniel Villalobos-Lara et al.
JOURNAL OF ELECTROANALYTICAL CHEMISTRY (2020)
Comparison of oscillating flow and slip velocity mass transfer enhancement in spacer-filled membrane channels: CFD analysis and validation
Y. Y. Liang et al.
JOURNAL OF MEMBRANE SCIENCE (2020)
Influence of temperature and other system parameters on microbial fuel cell performance: Numerical and experimental investigation
Siddharth Gadkari et al.
CHEMICAL ENGINEERING JOURNAL (2020)
Design, mathematical modelling, and numerical simulation of a novel tubular photoelectrochemical reactor and experimental validation by residence time distribution and mass transfer coefficients
Maria I. Jaramillo-Gutierrez et al.
CHEMICAL ENGINEERING JOURNAL (2020)
Electrochemical Engineering Assessment of a Novel 3D-Printed Filter-Press Electrochemical Reactor for Multipurpose Laboratory Applications
Raul A. Marquez-Montes et al.
ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2020)
Bipolar plate research using Computational Fluid Dynamics and neutron radiography for proton exchange membrane fuel cells
Alfredo Iranzo et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2020)
Mass Transport Optimization for Redox Flow Battery Design
Nicholas Gurieff et al.
APPLIED SCIENCES-BASEL (2020)
Experimental and numerical evaluation of the performance of the electrochemical reactor operated with static and dynamic electrodes in the reduction of hexavalent chromium
Juan A. Yanez-Varela et al.
CHEMICAL ENGINEERING JOURNAL (2020)
Inactivation of helminth eggs in an electro-Fenton reactor: Towards full electrochemical disinfection of human waste using activated carbon
Irma Robles et al.
CHEMOSPHERE (2020)
Modeling 3D current and potential distribution in a microbial electrolysis cell with augmented anode surface and non-ideal flow pattern
Karla M. Hernandez-Garcia et al.
BIOCHEMICAL ENGINEERING JOURNAL (2020)
Relating forward water and reverse salt fluxes to membrane porosity and tortuosity in forward osmosis: CFD modelling
Mohammad Kahrizi et al.
SEPARATION AND PURIFICATION TECHNOLOGY (2020)
Simulations of fluid flow, mass transport and current distribution in a parallel plate flow cell during nickel electrodeposition
Tzayam Perez et al.
JOURNAL OF ELECTROANALYTICAL CHEMISTRY (2020)
Evaluation of a decaying swirling flow electrochemical reactor for the manufacture of colloidal sulphur by reduction of sulphur dioxide
C. C. Contigiani et al.
CHEMICAL ENGINEERING AND PROCESSING-PROCESS INTENSIFICATION (2020)
Theoretical and experimental evaluation of the potential-current distribution and the recirculation flow rate effect in the performance of a porous electrode microbial electrolysis cell (MEC)
K. M. Hernandez-Garcia et al.
FUEL (2020)
Influence of Bubbles on the Energy Conversion Efficiency of Electrochemical Reactors
Andrea Angulo et al.
JOULE (2020)
Critical Review-The Versatile Plane Parallel Electrode Geometry: An Illustrated Review
L. F. Arenas et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2020)
The Effect of a Conical Inner Electrode on the Mass-transfer Behavior in a Cylindrical Electrochemical Reactor under Single-Phase and Two-Phase (Gas-Liquid) Swirling Flow
C. C. Contigiani et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2020)
A numerical multiphase CFD simulation for PEMFC with parallel sinusoidal flow fields
Seyed Ali Atyabi et al.
JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2019)
A hierarchical interdigitated flow field design for scale-up of high-performance redox flow batteries
Yikai Zeng et al.
APPLIED ENERGY (2019)
A theoretical analysis of the optimal electrode thickness and porosity
J. W. Haverkort
ELECTROCHIMICA ACTA (2019)
Quantitative study of mass transfer in megasonic micro electroforming based on mass transfer coefficient: Simulation and experimental validation
Ming Zhao et al.
ELECTROCHIMICA ACTA (2019)
Mathematical modeling of the electrochemical degradation of 2-chlorophenol using an electrochemical flow reactor equipped with BDD electrodes
Alejandro Regalado-Mendez et al.
JOURNAL OF FLOW CHEMISTRY (2019)
Experimental study and mathematical modeling of two phase flow with a Eulerian approach in a continuous gas evolving electrochlorinator
J. A. Ramirez et al.
CHEMICAL ENGINEERING RESEARCH & DESIGN (2019)
Evaluation of a modified hydrocyclone as electrochemical reactor for processing of two-phase (gas-liquid) systems
A. N. Colli et al.
ELECTROCHIMICA ACTA (2019)
A two-dimensional model for the design of flow fields in vanadium redox flow batteries
B. W. Zhang et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2019)
Time-dependent mass-transfer behaviour under laminar and turbulent flow conditions in rotating electrodes: A CFD study with analytical and experimental validation
A. N. Coili et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2019)
Modeling discontinuous potential distributions using the finite volume method, and application to liquid metal batteries
Norbert Weber et al.
ELECTROCHIMICA ACTA (2019)
Zinc electrode shape-change in secondary air batteries: A 2D modeling approach
Tobias Schmitt et al.
JOURNAL OF POWER SOURCES (2019)
Numerical modelling and CFD simulation of a polymer electrolyte membrane (PEM) fuel cell flow channel using an open pore cellular foam material
Tabbi Wilberforce et al.
SCIENCE OF THE TOTAL ENVIRONMENT (2019)
Heterogeneous Model To Distinguish the Activity of Electrogenerated Chlorine Species from Soluble Chlorine in an Electrochemical Reactor
Ricardo E. Palma-Goyes et al.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2019)
Coupling k Convection-Diffusion and Laplace Equations in an Open-Source CFD Model for Tertiary Current Distribution Calculations
A. N. Colli et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2019)
Phenomenological behavior coupling hydrodynamics and electrode kinetics in a flow electrochemical reactor. Numerical analysis and experimental validation
F. F. Rivera et al.
CHEMICAL ENGINEERING JOURNAL (2019)
Two-phase hydrodynamic modelling and experimental characterization in an activated sludge electrooxidation flow reactor
J. A. Barrios et al.
CHEMICAL ENGINEERING RESEARCH & DESIGN (2019)
Mass transfer in fibrous media with varying anisotropy for flow battery electrodes: Direct numerical simulations with 3D X-ray computed tomography
Matthew D. R. Kok et al.
CHEMICAL ENGINEERING SCIENCE (2019)
Towards uniformly distributed heat, mass and charge: A flow field design study for high pressure and high current density operation of PEM electrolysis cells
Anders Christian Olesen et al.
ELECTROCHIMICA ACTA (2019)
Simulations of single-phase flow in an up-flow electrochemical reactor with parallel plate electrodes in a serpentine array
Locksley F. Castaneda et al.
JOURNAL OF ELECTROANALYTICAL CHEMISTRY (2019)
Rotational plating process design with computational fluid analysis
Joo-Pyo Hong et al.
JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY (2019)
Development of a New Modeling Technique to Simulate 3-dimensional Electroplating System Considering the Effects of Fluid Flow
Kyung-Hwan Lim et al.
JOURNAL OF ELECTROCHEMICAL SCIENCE AND TECHNOLOGY (2019)
Environmental applications of electrochemical technology. What is needed to enable full-scale applications?
E. Lacasa et al.
CURRENT OPINION IN ELECTROCHEMISTRY (2019)
Mathematical modeling and simulation of the reaction environment in electrochemical reactors
Locksley F. Cataneda et al.
CURRENT OPINION IN ELECTROCHEMISTRY (2019)
General Simplified Model to Calculate Current Distribution in Electrochemical Reactors with N Bipolar Electrodes
I. Rodriguez-Torres et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2019)
Analysis of flow field design on vanadium redox flow battery performance: Development of 3D computational fluid dynamic model and experimental validation
M. Messaggi et al.
APPLIED ENERGY (2018)
Investigation of a two-dimensional model on microbial fuel cell with different biofilm porosities and external resistances
Wen-Fang Cai et al.
CHEMICAL ENGINEERING JOURNAL (2018)
Local mass-transfer study in a decaying swirling flow electrochemical reactor under single-phase and two-phase (gas-liquid) flow
C. C. Contigiani et al.
CHEMICAL ENGINEERING JOURNAL (2018)
CFD and experimental validation of an electrochemical reactor electrode design for Cr(VI) removal
Juan A. Yanez-Varela et al.
CHEMICAL ENGINEERING JOURNAL (2018)
Reactive diffusion migration layer and mass transfer wall function to model active chlorine generation in a filter press type electrochemical reactor for organic pollutant degradation
Eligio P. Rivero et al.
CHEMICAL ENGINEERING RESEARCH & DESIGN (2018)
Abatement of the antibiotic levofloxacin in a solar photoelectro-Fenton flow plant: Modeling the dissolved organic carbon concentration-time relationship
Gabriela Coria et al.
CHEMOSPHERE (2018)
Contribution of Sacrificial Anode in reinforced concrete patch repair: Results of numerical simulations
Eric Lozinguez et al.
CONSTRUCTION AND BUILDING MATERIALS (2018)
Electrodialysis for water desalination: A critical assessment of recent developments on process fundamentals, models and applications
A. Campione et al.
DESALINATION (2018)
Effect of various strategies of soc-dependent operating current on performance of a vanadium redox flow battery
W. W. Yang et al.
ELECTROCHIMICA ACTA (2018)
Impact of carbonation processes in anion exchange membrane fuel cells
Ulrike Krewer et al.
ELECTROCHIMICA ACTA (2018)
Analysis of inlet and gap effect in hydrodynamics and mass transport performance of a multipurpose electrochemical reactor: CFD simulation and experimental validation
A. Rodriguez et al.
ELECTROCHIMICA ACTA (2018)
Experimental study and mathematical modeling of the electrochemical degradation of dyeing wastewaters in presence of chloride ion with dimensional stable anodes (DSA) of expanded meshes in a FM01-LC reactor
Martin R. Cruz-Diaz et al.
ELECTROCHIMICA ACTA (2018)
Fluid Dynamics and Mass Transfer Study of Electrochemical Oxidation by CFD Prediction and Experimental Validation
Li Liu et al.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2018)
Performance evaluation of different bipolar plate designs of 3D planar anode-supported SOFCs
Deepra Bhattacharya et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2018)
Effect of the design parameters on mass transfer and energy consumption inside a lithium electrolysis cell
Elaheh Oliaii et al.
JOURNAL OF APPLIED ELECTROCHEMISTRY (2018)
Modelling the transport of ions and electrochemical regeneration of the resin in a hybrid ion exchange/electrodialysis process for As(V) removal
E. P. Rivero et al.
JOURNAL OF APPLIED ELECTROCHEMISTRY (2018)
Modeling the transient temperature distribution in a direct methanol fuel cell
Vaidhiswaran Ramesh et al.
JOURNAL OF ELECTROANALYTICAL CHEMISTRY (2018)
Electrosynthesis of hydrogen peroxide in a filter-press flow cell using graphite felt as air-diffusion cathode
Tzayam Perez et al.
JOURNAL OF ELECTROANALYTICAL CHEMISTRY (2018)
Models for Microbial Fuel Cells: A critical review
Chengshuo Xia et al.
JOURNAL OF POWER SOURCES (2018)
Multi-phase models for water and thermal management of proton exchange membrane fuel cell: A review
Guobin Zhang et al.
JOURNAL OF POWER SOURCES (2018)
A CFD Study with Analytical and Experimental Validation of Laminar and Turbulent Mass-Transfer in Electrochemical Reactors
A. N. Colli et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2018)
Study of mixing systems and geometric configurations for anaerobic digesters using CFD analysis
Grazia Leonzio
RENEWABLE ENERGY (2018)
Efficiently pumping out value-added resources from wastewater by bioelectrochemical systems: A review from energy perspectives
Shiqiang Zou et al.
WATER RESEARCH (2018)
Effect of placement angles on wireless electrocoagulation for bipolar aluminum electrodes
Zhenlian Qi et al.
FRONTIERS OF ENVIRONMENTAL SCIENCE & ENGINEERING (2018)
Homogenization of current density of PEM fuel cells by in-plane graded distributions of platinum loading and GDL porosity
Lei Xing et al.
CHEMICAL ENGINEERING SCIENCE (2018)
Multi-objective Bayesian optimization of chemical reactor design using computational fluid dynamics
Seongeon Park et al.
COMPUTERS & CHEMICAL ENGINEERING (2018)
Current and concentration distributions in electrochemical microreactors: Numerical calculations and asymptotic approximations for self-supported paired synthesis
S. Fransen et al.
ELECTROCHIMICA ACTA (2018)
Metal foams as flow distributors in comparison with serpentine and parallel flow fields in proton exchange membrane electrolyzer cells
S. Toghyani et al.
ELECTROCHIMICA ACTA (2018)
Current and potential distribution in electrochemical reactors with activated or resistive electrodes. A multiregion and open source approach
A. N. Colli et al.
ELECTROCHIMICA ACTA (2018)
Mass transport and energy consumption inside a lithium electrolysis cell
Elaheh Oliaii et al.
ELECTROCHIMICA ACTA (2018)
Computational Fluid Dynamics Approach for Performance Prediction in a Zinc-Air Fuel Cell
K. David Huang et al.
ENERGIES (2018)
Numerical modeling and analysis of thermal behavior and Li+ transport characteristic in lithium-ion battery
Zhoujian An et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2018)
Effects of gas diffusion layer deformation on the transport phenomena and performance of PEM fuel cells with interdigitated flow fields
Shian Li et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2018)
Flow distribution and mass transport analysis in cell geometries for redox flow batteries through computational fluid dynamics
R. Cervantes-Alcala et al.
JOURNAL OF APPLIED ELECTROCHEMISTRY (2018)
Numerical simulation and exploration of electrocoagulation process for arsenic and antimony removal: Electric field, flow field, and mass transfer studies
Peipei Song et al.
JOURNAL OF ENVIRONMENTAL MANAGEMENT (2018)
Natural convection effects in electrochemical systems
Javor K. Novev et al.
CURRENT OPINION IN ELECTROCHEMISTRY (2018)
Pressure Drop through Platinized Titanium Porous Electrodes for Cerium-Based Redox Flow Batteries
Luis F. Arenas et al.
AICHE JOURNAL (2018)
Modeling Zinc Electrowinning for Current Efficiency Prediction Based on Nernst-Plank Equation and Electrode Gas Evolution Reaction Kinetics
Zongliang Zhang et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2018)
Modeling of inhomogeneous compression effects of porous GDL on transport phenomena and performance in PEM fuel cells
Jiatang Wang et al.
INTERNATIONAL JOURNAL OF ENERGY RESEARCH (2017)
From millimetres to metres: the critical role of current density distributions in photo-electrochemical reactor design
A. Hankin et al.
ENERGY & ENVIRONMENTAL SCIENCE (2017)
On the mass transfer performance enhancement of membraneless redox flow cells with mixing promoters
Julian Marschewski et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2017)
Evolution of microfluidic fuel stack design as an innovative alternative to energy production
A. Moreno-Zuria et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2017)
Development of Bi-polar plate design of PEM fuel cell using CFD techniques
Tabbi Wilberforce et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2017)
Effect of electrode intrusion on pressure drop and electrochemical performance of an all-vanadium redox flow battery
S. Kumar et al.
JOURNAL OF POWER SOURCES (2017)
Simulations of Turbulent Flow, Mass Transport, and Tertiary Current Distribution on the Cathode of a Rotating Cylinder Electrode Reactor in Continuous Operation Mode during Silver Deposition
Mario Rosales et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2017)
Compact and General Strategy for Solving Current and Potential Distribution in Electrochemical Cells Composed of Massive Monopolar and Bipolar Electrodes
A. N. Colli et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2017)
Combination of Cumulative and Convergent Flows as a Means to Improve the Uniformity of Tertiary Current Distribution in Parallel-Plate Electrochemical Reactors
A. N. Colli et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2017)
Advances in modeling and simulation of Li-air batteries
Peng Tan et al.
PROGRESS IN ENERGY AND COMBUSTION SCIENCE (2017)
Performance evaluation of 3D rotating anode in electro coagulation reactor: Part I: Effect of impeller
Aditya Choudhary et al.
JOURNAL OF WATER PROCESS ENGINEERING (2017)
Performance evaluation of 3D rotating anode in electro coagulation reactor: Part II: Effect of rotation
Aditya Choudhary et al.
JOURNAL OF WATER PROCESS ENGINEERING (2017)
Graphite felt as a versatile electrode material: Properties, reaction environment, performance and applications
Locksley F. Castaneda et al.
ELECTROCHIMICA ACTA (2017)
On the Values for the Turbulent Schmidt Number in Environmental Flows
Carlo Gualtieri et al.
FLUIDS (2017)
Multi-physical modelling of reverse electrodialysis
L. Gurreri et al.
DESALINATION (2017)
Strongly coupled model for the prediction of the performances of an electrochemical reactor
Giuliana Litrico et al.
CHEMICAL ENGINEERING SCIENCE (2017)
Study of Hydrodynamics at Asahi™ prototype electrochemical flow reactor, using computational fluid dynamics and experimental characterization techniques
Fernando F. Rivera et al.
ELECTROCHIMICA ACTA (2017)
Effects of the current density distribution on a single-cell DMFC by tuning the anode catalyst in layers of gradual loadings: Modelling and experimental approach
Nicolo S. Vasile et al.
CHEMICAL ENGINEERING JOURNAL (2017)
Modeling of the electrocoagulation process: A study on the mass transfer of electrolysis and hydrolysis products
Jun Lu et al.
CHEMICAL ENGINEERING SCIENCE (2017)
Effect of electrode area on demineralization performance and the distribution of current density in an industrial-scale electrodialysis stack
David Tvrznik
DESALINATION (2017)
Analysis and validation of the hydrodynamics of an electrodialysis cell using computational fluid dynamics
R. Enciso et al.
DESALINATION (2017)
Solar photoelectro-Fenton flow plant modeling for the degradation of the antibiotic erythromycin in sulfate medium
Tzayam Perez et al.
ELECTROCHIMICA ACTA (2017)
Electrocoagulation process in water treatment: A review of electrocoagulation modeling approaches
Jean Nepo Hakizimana et al.
DESALINATION (2017)
Hydrodynamic design of electrochemical reactors based on computational fluid dynamics
G. Rodriguez et al.
DESALINATION AND WATER TREATMENT (2016)
Modeling of Ion Crossover in Vanadium Redox Flow Batteries: A Computationally-Efficient Lumped Parameter Approach for Extended Cycling
Philipp A. Boettcher et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2016)
In Situ Potential Distribution Measurement and Validated Model for All-Vanadium Redox Flow Battery
Yasser Ashraf Gandomi et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2016)
CFD prediction and experimental validation of surface cathode concentration in filter press parallel plate electrolysers
G. Rodriguez et al.
CATALYSIS TODAY (2016)
Computational fluid dynamics simulations of single-phase flow in a filter-press flow reactor having a stack of three cells
Miguel A. Sandoval et al.
ELECTROCHIMICA ACTA (2016)
Computational fluid dynamic simulations of turbulent flow in a rotating cylinder electrode reactor in continuous mode of operation
Mario Rosales et al.
ELECTROCHIMICA ACTA (2016)
Comparison of experimental and CFD mass transfer coefficient of three commercial turbulence promoters
J. E. Lira-Teco et al.
FUEL (2016)
Evaluation of the Effect of Pitched Blade Impellers on the Performance of an Electrochemical Reactor
Rodriguez-Arias Yonatan et al.
INTERNATIONAL JOURNAL OF ELECTROCHEMICAL SCIENCE (2016)
CFD simulation and development of an improved photoelectrochemical reactor for H2 production
Foad Farivar
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2016)
Simulation of transport phenomena in a photo-electrochemical reactor for solar hydrogen production
Ali M. Qureshy et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2016)
A numerical study of the gas-liquid, two-phase flow maldistribution in the anode of a high pressure PEM water electrolysis cell
Anders Christian Olesen et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2016)
Comparison of different microreactors for solvent-free, continuous synthesis of [EMIM][EtSO4] ionic liquid: An experimental and CFD study
N. Sen et al.
JOURNAL OF MOLECULAR LIQUIDS (2016)
Multi-variable mathematical models for the air-cathode microbial fuel cell system
Shiqi Ou et al.
JOURNAL OF POWER SOURCES (2016)
Modelling and simulation of thermal behaviour of vanadium redox flow battery
Yitao Yan et al.
JOURNAL OF POWER SOURCES (2016)
A multi -scale model of the oxygen reduction reaction on highly active graphene nanosheets in alkaline conditions
Jorge Vazquez-Arenas et al.
JOURNAL OF POWER SOURCES (2016)
Simultaneous Spatial and Temporal Measurements of the Current Distribution in a Miniature Hull Cell
Brian Chmielowiec et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2016)
Fundamentals and applications of inertial microfluidics: a review
Jun Zhang et al.
LAB ON A CHIP (2016)
Microbial electrolysis cells: An emerging technology for wastewater treatment and energy recovery. From laboratory to pilot plant and beyond
A. Escapa et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2016)
EXPERIMENTAL AND NUMERICAL INVESTIGATION OF TWO-PHASE FLOW PATTERNS IN MAGNESIUM ELECTROLYSIS CELL WITH NON-UNIFORM CURRENT DENSITY DISTRIBUTION
Cheng-Lin Liu et al.
CANADIAN JOURNAL OF CHEMICAL ENGINEERING (2015)
Numerical study on the improvement of flow distribution uniformity among parallel mini-channels
Cyril Pistoresi et al.
CHEMICAL ENGINEERING AND PROCESSING-PROCESS INTENSIFICATION (2015)
The effect of internal impellers on mixing in an electrochemical reactor with rotating rings electrodes
Huerta-Chavez Oliver et al.
CHEMICAL ENGINEERING AND PROCESSING-PROCESS INTENSIFICATION (2015)
Electrogenerated bubbles induced convection in narrow vertical cells: A review
Rainier Hreiz et al.
CHEMICAL ENGINEERING RESEARCH & DESIGN (2015)
Modelling current efficiency in an electrochemical hypochlorite reactor
M. Spasojevic et al.
CHEMICAL ENGINEERING RESEARCH & DESIGN (2015)
Modeling the the effect of non-ideal flow pattern on tertiary current distribution in a filter-press-type electrochemical reactor for copper recovery
Eligio P. Rivero et al.
CHEMICAL ENGINEERING RESEARCH & DESIGN (2015)
Electrogenerated bubbles induced convection in narrow vertical cells: Ply measurements and Euler-Lagrange CFD simulation
Rainier Hreiz et al.
CHEMICAL ENGINEERING SCIENCE (2015)
Modeling of spiral wound membrane desalination modules and plants - review and research priorities
A. J. Karabelas et al.
DESALINATION (2015)
Characterization of hydrodynamics and mass transfer in two types of tubular electrochemical reactors
Jiade Wang et al.
ELECTROCHIMICA ACTA (2015)
Simulation of current distribution along a planar electrode under turbulent flow conditions in a laboratory filter-press flow cell
Tzayam Perez et al.
ELECTROCHIMICA ACTA (2015)
One-dimensional Conduction-based Modeling of Bioenergy Production in a Microbial Fuel Cell Engaged with Multi-population Biocatalysts
Masih Karimi Alavijeh et al.
ELECTROCHIMICA ACTA (2015)
Local microprocesses at gas-evolving electrodes and their influence on mass transfer
Helmut Vogt et al.
ELECTROCHIMICA ACTA (2015)
Comparison between Numerical Simulations and Experimental Results on Copper Deposition in Rotating Cylinder Hull Cell
Jaeyeong Park et al.
ELECTROCHIMICA ACTA (2015)
The reaction environment in a filter-press laboratory reactor: the FM01-LC flow cell
Fernando F. Rivera et al.
ELECTROCHIMICA ACTA (2015)
The filter-press FM01-LC laboratory flow reactor and its applications
Fernando F. Rivera et al.
ELECTROCHIMICA ACTA (2015)
Fuel Pressure Distribution as a Criterion for the Bipolar Plate Geometry Optimization in PEM Fuel Cells, Modeling and Experiment
M. A. Zamora Antunano et al.
FUEL CELLS (2015)
Direct numerical simulation of near-wall turbulent flow and ionic mass transport in electrochemical reactors using a hybrid finite element/spectral method
M. Krivilyov et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2015)
Modeling of electrochemically generated bubbly flow under buoyancy-driven and forced convection
Jonathan Schillings et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2015)
Recent developments of electro-oxidation in water treatment - A review
Heikki Sarkka et al.
JOURNAL OF ELECTROANALYTICAL CHEMISTRY (2015)
Fundamental models for flow batteries
Q. Xu et al.
PROGRESS IN ENERGY AND COMBUSTION SCIENCE (2015)
Experimental and modeling studies of a micro direct methanol fuel cell
D. S. Falcao et al.
RENEWABLE ENERGY (2015)
Numerical Analysis of Petroleum Refinery Wastewater Treatment Using Electro-Fenton Process
Reza Davarnejad et al.
CHEMICAL PRODUCT AND PROCESS MODELING (2015)
Design of a new FM01-LC reactor in parallel plate configuration using numerical simulation and experimental validation with residence time distribution (RTD)
Martin R. Cruz-Diaz et al.
CHEMICAL ENGINEERING AND PROCESSING-PROCESS INTENSIFICATION (2014)
Current density distribution and gas volume fraction in the gap of lantern blade electrodes
Lokmane Abdelouahed et al.
CHEMICAL ENGINEERING RESEARCH & DESIGN (2014)
Hydrodynamics of gas bubbles in the gap of lantern blade electrodes without forced flow of electrolyte: Experiments and CFD modelling
Lokmane Abdelouahed et al.
CHEMICAL ENGINEERING SCIENCE (2014)
A coupled three dimensional model of vanadium redox flow battery for flow field designs
Cong Yin et al.
ENERGY (2014)
Hydrodynamic analysis of flow fields for redox flow battery applications
T. Jyothi Latha et al.
JOURNAL OF APPLIED ELECTROCHEMISTRY (2014)
The importance of current distribution and cell hydrodynamic analysis for the design of electrocoagulation reactors
Armando Vazquez et al.
JOURNAL OF CHEMICAL TECHNOLOGY AND BIOTECHNOLOGY (2014)
Numerical simulation of the primary, secondary and tertiary current distributions on the cathode of a rotating cylinder electrode cell. Influence of using plates and a concentric cylinder as counter electrodes
Tzayam Perez et al.
JOURNAL OF ELECTROANALYTICAL CHEMISTRY (2014)
Computational electrochemo-fluid dynamics modeling in a uranium electrowinning cell
K. R. Kim et al.
JOURNAL OF RADIOANALYTICAL AND NUCLEAR CHEMISTRY (2014)
Finite Element Modeling of Continuous Flow Tubular Electrochemical Reactor for Industrial and Domestic Wastewater Treatment
Bahadir K. Korbahti
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2014)
Modelling potential/current distribution in microbial electrochemical systems shows how the optimal bioanode architecture depends on electrolyte conductivity
Remy Lacroix et al.
PHYSICAL CHEMISTRY CHEMICAL PHYSICS (2014)
Recent advances and challenges in the anode architecture and their modifications for the applications of microbial fuel cells
G. Gnana Kumar et al.
BIOSENSORS & BIOELECTRONICS (2013)
Characterization of a bipolar parallel-plate electrochemical reactor for water disinfection using low conductivity drinking water
E. R. Henquin et al.
CHEMICAL ENGINEERING AND PROCESSING-PROCESS INTENSIFICATION (2013)
Highlights during the development of electrochemical engineering
S. Bebelis et al.
CHEMICAL ENGINEERING RESEARCH & DESIGN (2013)
Some aspects of photocatalytic reactor modeling using computational fluid dynamics
Yash Boyjoo et al.
CHEMICAL ENGINEERING SCIENCE (2013)
Flow dynamics and mass transfer studies in a tubular electrochemical reactor with a mesh electrode
Dhorgham Skban Ibrahim et al.
COMPUTERS & FLUIDS (2013)
The hydrodynamic behavior of a parallel-plate electrochemical reactor
Ulises Miguel Lopez-Garcia et al.
FUEL (2013)
CFD evaluation of internal manifold effects on mass transport distribution in a laboratory filter-press flow cell
L. Vazquez et al.
JOURNAL OF APPLIED ELECTROCHEMISTRY (2013)
Numerical simulation of current distribution along the boron-doped diamond anode of a filter-press-type FM01-LC reactor during the oxidation of water
Tzayam Perez et al.
JOURNAL OF ELECTROANALYTICAL CHEMISTRY (2013)
Basic mathematical model of overlimiting transfer enhanced by electroconvection in flow-through electrodialysis membrane cells
M. K. Urtenov et al.
JOURNAL OF MEMBRANE SCIENCE (2013)
Shear Flow of an Electrically Charged Fluid by Ion Concentration Polarization: Scaling Laws for Electroconvective Vortices
Rhokyun Kwak et al.
PHYSICAL REVIEW LETTERS (2013)
Towards orientation-independent performance of membraneless microfluidic fuel cell: Understanding the gravity effects
Jin Xuan et al.
APPLIED ENERGY (2012)
Primary potential and current density distribution analysis: A first approach for designing electrocoagulation reactors
Armando Vazquez et al.
CHEMICAL ENGINEERING JOURNAL (2012)
Numerical simulation of mass transport in a filter press type electrochemical reactor FM01-LC: Comparison of predicted and experimental mass transfer coefficient
Eligio P. Rivero et al.
CHEMICAL ENGINEERING RESEARCH & DESIGN (2012)
Scale-up of rotating cylinder electrode electrochemical reactor for Cu(II) recovery: Experimental and simulation study in turbulence regimen
Francisco J. Almazan-Ruiz et al.
ELECTROCHIMICA ACTA (2012)
Evaluation of the Effect of the Rotational Electrode Speed in an Electrochemical Reactor Using Computational Fluid Dynamics (CFD) Analysis
Helvio R. Mollinedo-Ponce-de-Leon et al.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2012)
Electrochemical Microreactor Design for Alkoxylation Reactions-Experiments and Simulations
Jiri Kristal et al.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2012)
Performance evaluation of an electrochemical reactor used to reduce Cr(VI) from aqueous media applying CFD simulations
Sergio Martinez-Delgadillo et al.
JOURNAL OF CLEANER PRODUCTION (2012)
A Transient Vanadium Flow Battery Model Incorporating Vanadium Crossover and Water Transport through the Membrane
K. W. Knehr et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2012)
Dean vortices in turbulent flows: rocking or rolling?
Athanasia Kalpakli et al.
JOURNAL OF VISUALIZATION (2012)
Model and experimental studies of gravitational convection in an electromembrane cell
A. V. Pismensky et al.
RUSSIAN JOURNAL OF ELECTROCHEMISTRY (2012)
Optimized design of an electrochemical filter-press reactor using CFD methods
Angel Frias-Ferrer et al.
CHEMICAL ENGINEERING JOURNAL (2011)
Performance of a multipurpose research electrochemical reactor
E. R. Henquin et al.
ELECTROCHIMICA ACTA (2011)
Generalized study of the temporal behaviour in recirculating electrochemical reactor systems
A. N. Colli et al.
ELECTROCHIMICA ACTA (2011)
A multiscale theoretical methodology for the calculation of electrochemical observables from ab initio data: Application to the oxygen reduction reaction in a Pt(111)-based polymer electrolyte membrane fuel cell
Rodrigo Ferreira de Morais et al.
ELECTROCHIMICA ACTA (2011)
A computational study of bifunctional oxygen electrode in air-breathing reversible microfluidic fuel cells
Jin Xuan et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2011)
Mass transfer enhancement for mesh electrode in a tubular electrochemical reactor using experimental and numerical simulation method
Jing Su et al.
RUSSIAN JOURNAL OF ELECTROCHEMISTRY (2011)
Intensive current transfer in membrane systems: Modelling, mechanisms and application in electrodialysis
Victor V. Nikonenko et al.
ADVANCES IN COLLOID AND INTERFACE SCIENCE (2010)
Residence time distribution and back-mixing in a tubular electrochemical reactor operated with different inlet flow velocities, to remove Cr(VI) from wastewater
S. A. Martinez-Delgadillo et al.
CHEMICAL ENGINEERING JOURNAL (2010)
Characterization of fluid dynamics and mass-transfer in an electrochemical oxidation cell by experimental and CFD studies
J. L. C. Santos et al.
CHEMICAL ENGINEERING JOURNAL (2010)
Mass transfer modeling and simulation at a rotating cylinder electrode (RCE) reactor under turbulent flow for copper recovery
E. P. Rivero et al.
CHEMICAL ENGINEERING SCIENCE (2010)
Performance of a tubular electrochemical reactor, operated with different inlets, to remove Cr(VI) from wastewater
S. A. Martinez-Delgadillo et al.
COMPUTERS & CHEMICAL ENGINEERING (2010)
Simulation of velocity profiles in a laboratory electrolyser using computational fluid dynamics
L. Vazquez et al.
ELECTROCHIMICA ACTA (2010)
Hydrogen production in a zigzag and straight catalytic wall coated micro channel reactor by CFD modeling
Ali Fazeli et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2010)
CFD study on flow distribution uniformity in fuel distributors having multiple structural bifurcations of flow channels
Hong Liu et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2010)
Laminar periodic flow and heat transfer in square channel with 45° inline baffles on two opposite walls
Pongjet Promvonge et al.
INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2010)
CFD-Based Design of Microtubular Solid Oxide Fuel Cells
Stefano Cordiner et al.
JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME (2010)
A kinetic perspective on extracellular electron transfer by anode-respiring bacteria
Cesar I. Torres et al.
FEMS MICROBIOLOGY REVIEWS (2010)
Simulation of the Two-Phase Flow Hydrodynamics in an IRDE Reactor
Thomas Nierhaus et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2009)
Two-phase electrolysis process: From the bubble to the electrochemical cell properties
Ph. Mandin et al.
CHEMICAL ENGINEERING AND PROCESSING-PROCESS INTENSIFICATION (2008)
Residence time distribution in continuous stirred tank electrochemical reactor
R. Saravanathamizhan et al.
CHEMICAL ENGINEERING JOURNAL (2008)
Determination of the effective thickness of a porous electrode in a flow-through reactor;: effect of the specific surface area of stainless steel fibres, used as a porous cathode, during the deposition of Ag(I) ions
J. L. Nava et al.
HYDROMETALLURGY (2008)
Turbulent Schmidt numbers for CFD analysis with various types of flowfield
Yoshihide Tominaga et al.
ATMOSPHERIC ENVIRONMENT (2007)
Prediction of the electrodeposition process behavior with the gravity or acceleration value at continuous and discrete scale
Ph. Mandin et al.
ELECTROCHIMICA ACTA (2007)
Optimizing model complexity with application to fuel cell based power systems
Karthik Subramanyan et al.
CHEMICAL ENGINEERING AND PROCESSING-PROCESS INTENSIFICATION (2007)
Potential and current density distributions along a bipolar electrode
R. Kodym et al.
JOURNAL OF APPLIED ELECTROCHEMISTRY (2007)
Models of hypochlorite production in electrochemical reactors with plate and porous anodes
C. Y. Cheng et al.
JOURNAL OF APPLIED ELECTROCHEMISTRY (2007)
Numerical simulation of the current, potential and concentration distributions along the cathode of a rotating cylinder Hull cell
C. T. J. Low et al.
ELECTROCHIMICA ACTA (2007)
The application of flow dispersion models to the FM01-LC laboratory filter-press reactor
P. Trinidad et al.
ELECTROCHIMICA ACTA (2006)
Modelling and calculation of the current density distribution evolution at vertical gas-evolving electrodes
M Philippe et al.
ELECTROCHIMICA ACTA (2005)
CFD simulations of coupled, countercurrent combustor/reformer microdevices for hydrogen production
SR Deshmukh et al.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2005)
The rotating cylinder electrode (RCE) and its application to the electrodeposition of metals
CTJ Low et al.
AUSTRALIAN JOURNAL OF CHEMISTRY (2005)
Micro reactor for electroorganic synthesis in the simulated moving bed-reaction and separation environment
M Küpper et al.
ELECTROCHIMICA ACTA (2003)
Optimisation of a cupplater reactor for gold deposition on wafers
D de Kubber et al.
ELECTROCHIMICA ACTA (2001)