4.7 Article

3D MXene hybrid architectures for the cold-resistant, rapid and selective capture of precious metals from electronic waste and mineral

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Green & Sustainable Science & Technology

Identification of pH-dependent removal mechanisms of lead and arsenic by basic oxygen furnace slag: Relative contribution of precipitation and adsorption

Sang Hyun Kim et al.

Summary: The study found that lead was mainly removed by precipitation, while arsenic was mainly removed by adsorption, with the precipitation of amorphous calcium arsenate observed at higher pH values. The research also suggested the involvement of Ca2+ in the adsorption of arsenic, and that the precipitation mechanism appeared more stable than adsorption when tested.

JOURNAL OF CLEANER PRODUCTION (2021)

Review Chemistry, Multidisciplinary

Recent Progress in Graphene/Polymer Nanocomposites

Xianxian Sun et al.

Summary: Nanocomposites with graphene as filler have attracted increasing attention due to their unique properties. This review summarizes recent progress on graphene/polymer nanocomposites, focusing on strengthening/toughening, electrical conduction, thermal transportation, and photothermal energy conversion. The influence of graphene configuration on properties and the role of interfacial interaction between graphene and polymer are analyzed, providing insights for preparing high-performance nanocomposites in the future.

ADVANCED MATERIALS (2021)

Article Engineering, Environmental

Pod-inspired MXene/porous carbon microspheres with ultrahigh adsorption capacity towards crystal violet

Zhengguo Wu et al.

Summary: This study presents the preparation of novel superadsorbent material CPCM@MXenes and their high efficiency in adsorption and removal of crystal violet from water. The material features high specific surface area, 3D structural arrangement, and good recyclability.

CHEMICAL ENGINEERING JOURNAL (2021)

Article Engineering, Environmental

Rapid synthesis of polyimidazole functionalized MXene via microwave-irradiation assisted multi-component reaction and its iodine adsorption performance

Shiyan Sun et al.

Summary: Recent studies have shown that the adsorption capacity of MXene-PIL for iodine can reach as high as about 170 mg/g. The in-situ generation of polyionic liquid on MXene has been demonstrated as a simple strategy for the potential application in adsorptive removal of iodine.

JOURNAL OF HAZARDOUS MATERIALS (2021)

Article Environmental Sciences

Persimmon tannin functionalized polyacrylonitrile fiber for highly efficient and selective recovery of Au(III) from aqueous solution

Fenglei Liu et al.

Summary: The efficient fibrous adsorbent PANF-TETA-PT showed superior adsorption capacity for Au(III) compared to other adsorbents, with good preference for adsorbing Au(III) even in the presence of coexisting pollutants. Characterization analysis revealed that electrostatic attraction and chelation dominated the uptake of Au(III) on PANF-TETA-PT.

CHEMOSPHERE (2021)

Article Engineering, Chemical

Selective capture of Hg(II) and Ag(I) from water by sulfur-functionalized polyamidoamine dendrimer/magnetic Fe3O4 hybrid materials

Liping Luan et al.

Summary: This study developed sulfur-functionalized PAMAM dendrimer/magnetic Fe3O4 hybrid materials for efficient capturing of Hg(II) and Ag(I) from water solution. The hybrid materials exhibited good adsorption selectivity and could be regenerated for practical reuse.

SEPARATION AND PURIFICATION TECHNOLOGY (2021)

Article Engineering, Environmental

Preparation of bifunctional polysilsesquioxane/carbon nanotube magnetic composites and their adsorption properties for Au (III)

Ting Xu et al.

Summary: Bifunctional polysilsesquioxane/carbon nanotube magnetic composites were prepared and their adsorption capacities for Au(III) were systematically investigated. The results showed that the composites exhibited good adsorption performance and could be utilized for efficient recovery of Au(III) from waste water.

CHEMICAL ENGINEERING JOURNAL (2021)

Review Environmental Sciences

Potential environmental applications of MXenes: A critical review

Yubing Sun et al.

Summary: Various environmental pollutants are discharged into environments due to rapid industrialization, posing a potential threat to human health and eco-diversity. Advanced nanomaterials like MXenes show promising performance in removing pollutants with exceptional structural properties, playing a key role in environmental applications.

CHEMOSPHERE (2021)

Article Engineering, Environmental

Highly selective and straightforward recovery of gold and platinum from acidic waste effluents using cellulose-based bio-adsorbent

Foni B. Biswas et al.

Summary: The recovery of precious metals (AuIII and PtIV) from waste resources using dithiocarbamate-modified cellulose (DMC) as a bio-adsorbent shows excellent adsorption efficiency, high selectivity, and significant capacity and rate for reaching equilibrium. The captured AuIII or PtIV in DMC can be subsequently recovered as Au0 and Pt0 via incineration with a yield of 99%, providing a more effective and straightforward technique compared to traditional methods.

JOURNAL OF HAZARDOUS MATERIALS (2021)

Article Green & Sustainable Science & Technology

Selective recovery of precious metals through photocatalysis

Yao Chen et al.

Summary: This article presents a greener photocatalytic process for recovering up to seven precious metals from waste, demonstrating its potential for wide application and importance in implementing a circular economy.

NATURE SUSTAINABILITY (2021)

Article Engineering, Biomedical

Black phosphorous nanosheet: A novel immune-potentiating nanoadjuvant for near-infrared-improved immunotherapy

Wen-Hao Li et al.

Summary: The research explores the immune-potentiating effects of black phosphorus nanosheets for cancer immunotherapy. By using a multifunctional nanoadjuvant, high loading capacity, efficient drug delivery, DC activation, and biocompatibility are integrated to enhance antitumor immunity. Additionally, near-infrared photothermal effects create an immune-favorable microenvironment for improved local immunization.

BIOMATERIALS (2021)

Article Engineering, Environmental

Fabrication of MXene/PEI functionalized sodium alginate aerogel and its excellent adsorption behavior for Cr(VI) and Congo Red from aqueous solution

Yilin Feng et al.

Summary: The MXene/PEI modified sodium alginate aerogel (MPA) showed excellent adsorption capacity for both Cr(VI) and Congo Red, with strong mechanical strength and antibacterial properties, making it suitable for wide applications in water treatment.

JOURNAL OF HAZARDOUS MATERIALS (2021)

Article Materials Science, Multidisciplinary

MXenes induce epitaxial growth of size-controlled noble nanometals: A case study for surface enhanced Raman scattering (SERS)

Renfei Cheng et al.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2020)

Article Chemistry, Multidisciplinary

Emerging 2D Materials Produced via Electrochemistry

Sheng Yang et al.

ADVANCED MATERIALS (2020)

Article Engineering, Environmental

A lightweight and conductive MXene/graphene hybrid foam for superior electromagnetic interference shielding

Zhimin Fan et al.

CHEMICAL ENGINEERING JOURNAL (2020)

Article Chemistry, Physical

Hyperbranched thiourea-grafted electrospun polyacrylonitrile fibers for efficient and selective gold recovery

Jiadi Liu et al.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2020)

Article Chemistry, Multidisciplinary

Polypyrrole-Mo3S13: An Efficient Sorbent for the Capture of Hg2+ and Highly Selective Extraction of Ag+ over Cu2+

Mengwei Yuan et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2020)

Article Chemistry, Multidisciplinary

Scalable Manufacturing of Free-Standing, Strong Ti3C2Tx MXene Films with Outstanding Conductivity

Jizhen Zhang et al.

ADVANCED MATERIALS (2020)

Article Chemistry, Multidisciplinary

In Situ Reduction of Au(I) for Efficient Recovery of Gold from Thiosulfate Solution by the 3D MoS2/Chitosan Aerogel

Peng Chen et al.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2020)

Article Nanoscience & Nanotechnology

Efficient Gold Recovery from E-Waste via a Chelate-Containing Porous Aromatic Framework

Tingting Ma et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Article Nanoscience & Nanotechnology

Anisotropic Electromagnetic Absorption of Aligned Ti3C2Tx MXene/Gelatin Nanocomposite Aerogels

Minglong Yang et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Article Engineering, Environmental

Efficient phosphorus recycling and heavy metal removal from wastewater sludge by a novel hydrothermal humification-technique

Shuaishuai Zhang et al.

CHEMICAL ENGINEERING JOURNAL (2020)

Article Chemistry, Multidisciplinary

Irreversible Amide-Linked Covalent Organic Framework for Selective and Ultrafast Gold Recovery

Hai-Long Qian et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2020)

Article Nanoscience & Nanotechnology

MXene-Carbon Nanotube Hybrid Membrane for Robust Recovery of Au from Trace-Level Solution

Chunmei Wang et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Article Multidisciplinary Sciences

Precious metal recovery from electronic waste by a porous porphyrin polymer

Yeongran Hong et al.

PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2020)

Article Nanoscience & Nanotechnology

SnS Micro/Nanocrystals with Urchinlike Architectures for Capture of Au(III), Pt(IV), and Pd(II)

Zhen Qin et al.

ACS APPLIED NANO MATERIALS (2020)

Review Engineering, Environmental

Recovery of precious metals from electronic waste and spent catalysts: A review

Yunji Ding et al.

RESOURCES CONSERVATION AND RECYCLING (2019)

Article Chemistry, Multidisciplinary

3D Macroscopic Architectures from Self-Assembled MXene Hydrogels

Tongxin Shang et al.

ADVANCED FUNCTIONAL MATERIALS (2019)

Article Chemistry, Multidisciplinary

N-Butyllithium-Treated Ti3C2Tx MXene with Excellent Pseudocapacitor Performance

Xifan Chen et al.

ACS NANO (2019)

Article Engineering, Environmental

Thiol-ene synthesis of thioether/carboxyl-functionalized polymers for selective adsorption of silver (I) ions

Yanjun Huang et al.

CHEMICAL ENGINEERING JOURNAL (2019)

Article Chemistry, Multidisciplinary

Recovery of Au(III) from Acidic Chloride Media by Homogenous Liquid-Liquid Extraction with UCST-Type Ionic Liquids

Ning Wang et al.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2019)

Article Engineering, Environmental

Highly efficient and selective recovery of Au(III) from a complex system by molybdenum disulfide nanoflakes

Biao Feng et al.

CHEMICAL ENGINEERING JOURNAL (2018)

Article Chemistry, Multidisciplinary

Multifunctional, Superelastic, and Lightweight MXene/Polyimide Aerogels

Ji Liu et al.

Article Chemistry, Multidisciplinary

Graphene Oxide Restricts Growth and Recrystallization of Ice Crystals

Hongya Geng et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2017)

Article Chemistry, Multidisciplinary

MoS2 Nanosheets with Widened Interlayer Spacing for High-Efficiency Removal of Mercury in Aquatic Systems

Kelong Ai et al.

ADVANCED FUNCTIONAL MATERIALS (2016)