4.3 Article

Combined effects of double porous layers and nanofluids on the performance of confined single and multi-jet impingement heat transfer

期刊

CHEMICAL ENGINEERING COMMUNICATIONS
卷 209, 期 7, 页码 925-937

出版社

TAYLOR & FRANCIS INC
DOI: 10.1080/00986445.2021.1928650

关键词

Finite element method; multiple jet; nanofluid; porous layer

向作者/读者索取更多资源

In this study, the cooling performance of nanofluid jet impingement with single and multiple jets is analyzed with the impact of using double porous layers with finite element method (FEM). The presence of the double porous layers significantly affects the convective heat transfer performance, with the variation in permeability having the largest impact on the performance.
In this study, nanofluid jet impingement cooling performance with single and multiple jets are analyzed under the impacts of using double porous layers with finite element method (FEM). The numerical study is performed by using different values of pertinent parameters as: Re number (100 <= Re <= 300), permeability of the porous zones (10(-4) <= Da1 <= 10(-1) and 10(-4) <= Da2 <= 10(-1)), second porous layer height (0.1H <= d2 <= 0.5H), distance between the porous layers (0.1H <= h <= 0.5H), solid volume fraction (0 <= phi <= 3%), and particle diameter (20nm <= dp <= 80nm). Discrepancies between the single and multiple jet configurations become higher for Re numbers while at Re = 300, the average heat transfer (HT) is 31% for multiple jet case. The presence of the double porous layers significantly affects the convective HT performance and the highest impact is observed by varying the permeability of the porous layers. When the lowest and highest permeability of the lower layer are compared, there is 119% variation in the average Nu for multi-jet (MJ) case and this value is 84.5% for single jet (SJ) case. When varying the permeability of the upper porous layer, the highest HT rate is achieved at Darcy number of 10(-3) while 32% higher Nu is obtained for MJ case as compared to SJ case. There is slight impact of the distance between the porous layers on the fluid flow and HT while varying the height of the upper layer results in 8.9% variation in the average Nu number. Inclusion of the nanoparticle (NP) further improves the average Nu by about 11% for single and multiple jet cases at the highest solid volume fraction while the impact of NP size is slight.

作者

我是这篇论文的作者
点击您的名字以认领此论文并将其添加到您的个人资料中。

评论

主要评分

4.3
评分不足

次要评分

新颖性
-
重要性
-
科学严谨性
-
评价这篇论文

推荐

暂无数据
暂无数据