相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。Incorporation of strontium and calcium in geopolymer gels
Brant Walkley et al.
JOURNAL OF HAZARDOUS MATERIALS (2020)
Effect of different grade levels of calcined clays on fresh and hardened properties of ternary-blended cementitious materials for 3D printing
Yu Chen et al.
CEMENT & CONCRETE COMPOSITES (2020)
Improving printability of limestone-calcined clay-based cementitious materials by using viscosity-modifying admixture
Yu Chen et al.
CEMENT AND CONCRETE RESEARCH (2020)
Hardening evolution of geopolymers from setting to equilibrium: A review
Navid Ranjbar et al.
CEMENT & CONCRETE COMPOSITES (2020)
How do different testing procedures affect the rheological properties of cement paste?
Aida Margarita Ley-Hernandez et al.
CEMENT AND CONCRETE RESEARCH (2020)
Influence of maximum applied shear rate on the measured rheological properties of flowable cement pastes
Dimitri Feys et al.
CEMENT AND CONCRETE RESEARCH (2019)
Rheology of cement grouts: On the critical shear rate and no-slip regime in the Couette geometry
Tafadzwa John Shamu et al.
CEMENT AND CONCRETE RESEARCH (2019)
Elucidating how particle packing controls rheology and strength development of dense cementitious suspensions
Iman Mehdipour et al.
CEMENT & CONCRETE COMPOSITES (2019)
Dissolution mechanism of fly ash to quantify the reactive aluminosilicates in geopolymerisation
Carsten Kuenzel et al.
RESOURCES CONSERVATION AND RECYCLING (2019)
Thixotropy of SCC-A model describing the effect of particle packing and superplasticizer adsorption on thixotropic structural build-up of the mortar phase based on interparticle interactions
Dirk Lowke
CEMENT AND CONCRETE RESEARCH (2018)
Hydration and rheology control of concrete for digital fabrication: Potential admixtures and cement chemistry
Delphine Marchon et al.
CEMENT AND CONCRETE RESEARCH (2018)
Rheological requirements for printable concretes
Nicolas Roussel
CEMENT AND CONCRETE RESEARCH (2018)
The role of early age structural build-up in digital fabrication with concrete
Lex Reiter et al.
CEMENT AND CONCRETE RESEARCH (2018)
Investigation of the rheology and strength of geopolymer mixtures for extrusion-based 3D printing
Biranchi Panda et al.
CEMENT & CONCRETE COMPOSITES (2018)
Cementitious materials for construction-scale 3D printing: Laboratory testing of fresh printing mixture
Ali Kazemian et al.
CONSTRUCTION AND BUILDING MATERIALS (2017)
Evolution of strength and failure of SCC during early hydration
Linus K. Mettler et al.
CEMENT AND CONCRETE RESEARCH (2016)
The rheology of cementitious suspensions: A closer look at experimental parameters and property determination using common rheological models
Kirk Vance et al.
CEMENT & CONCRETE COMPOSITES (2015)
Avoiding inaccurate interpretations of rheological measurements for cement-based materials
Olafur H. Wallevik et al.
CEMENT AND CONCRETE RESEARCH (2015)
Mechanical properties and compositional heterogeneities of fresh geopolymer pastes
A. Favier et al.
CEMENT AND CONCRETE RESEARCH (2013)
The origins of thixotropy of fresh cement pastes
N. Roussel et al.
CEMENT AND CONCRETE RESEARCH (2012)
An investigation of microstructure evolution in cement paste through setting using ultrasonic and rheological measurements
Kolluru V. Subramaniam et al.
CEMENT AND CONCRETE RESEARCH (2010)
Flow analysis of water-powder mixtures: Application to specific surface area and shape factor
M. Hunger et al.
CEMENT & CONCRETE COMPOSITES (2009)
Rheological properties of cement paste: Thixotropic behavior and structural breakdown
Jon Elvar Wallevik
CEMENT AND CONCRETE RESEARCH (2009)
Rheology of fresh concrete: from measurements to predictions of casting processes
Nicolas Roussel
MATERIALS AND STRUCTURES (2007)
The LCPC BOX: a cheap and simple technique for yield stress measurements of SCC
Nicolas Roussel
MATERIALS AND STRUCTURES (2007)
Geopolymerisation kinetics. 1. In situ energy-dispersive X-ray diffractometry
John L. Provis et al.
CHEMICAL ENGINEERING SCIENCE (2007)
The effect of alkali and Si/Al ratio on the development of mechanical properties of metakaolin-based geopolymers
P. Duxson et al.
COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2007)
A thixotropy model for fresh fluid concretes: Theory, validation and applications
Nicolas Roussel
CEMENT AND CONCRETE RESEARCH (2006)
The role played by the reactive alumina content in the alkaline activation of fly ashes
A Fernández-Jiménez et al.
MICROPOROUS AND MESOPOROUS MATERIALS (2006)
A physical model for the prediction of lateral stress exerted by self-compacting concrete on formwork
G. Ovarlez et al.
MATERIALS AND STRUCTURES (2006)
Rheometric and ultrasonic investigations of viscoelastic properties of fresh Portland cement pastes
ZH Sun et al.
CEMENT AND CONCRETE RESEARCH (2006)
Understanding the relationship between geopolymer composition, microstructure and mechanical properties
P Duxson et al.
COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2005)
Microstructure development of alkali-activated fly ash cement:: a descriptive model
A Fernández-Jiménez et al.
CEMENT AND CONCRETE RESEARCH (2005)
Alkaline activation of fly ashes:: NMR study of the reaction products
A Palomo et al.
JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2004)
Gelation, shear-thinning and shear-thickening in cement slurries
D Lootens et al.
OIL & GAS SCIENCE AND TECHNOLOGY-REVUE D IFP ENERGIES NOUVELLES (2004)
The effect of measuring procedure on the apparent rheological properties of self-compacting concrete
MR Geiker et al.
CEMENT AND CONCRETE RESEARCH (2002)
Dynamic mode rheology of cement and tricalcium silicate pastes from mixing to setting
L Nachbaur et al.
CEMENT AND CONCRETE RESEARCH (2001)
分享论文
