相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。Mechanical and microstructural characterization of geopolymers from assorted construction and demolition waste-based masonry and glass
Huseyin Ulugol et al.
JOURNAL OF CLEANER PRODUCTION (2021)
Development of alkali-activated binders from recycled mixed masonry-originated waste
Guerkan Yildirim et al.
JOURNAL OF BUILDING ENGINEERING (2021)
Effect of the Sodium Silicate Modulus and Slag Content on Fresh and Hardened Properties of Alkali-Activated Fly Ash/Slag
Xiaowei Ouyang et al.
MINERALS (2020)
Strength, microstructure, efflorescence behavior and environmental impacts of waste glass geopolymers cured at ambient temperature
Rui Xiao et al.
JOURNAL OF CLEANER PRODUCTION (2020)
Inline quantification of extrudability of cementitious materials for digital construction
V. N. Nerella et al.
CEMENT & CONCRETE COMPOSITES (2019)
PROPERTIES OF FRESH AND HARDENED GEOPOLYMER-BASED GROUTS
Jian Zhang et al.
CERAMICS-SILIKATY (2019)
Construction and demolition waste in geopolymer concrete technology: a review
Sina Dadsetan et al.
MAGAZINE OF CONCRETE RESEARCH (2019)
The Effect of Viscosity-Modifying Admixture on the Extrudability of Limestone and Calcined Clay-Based Cementitious Material for Extrusion-Based 3D Concrete Printing
Yu Chen et al.
MATERIALS (2019)
An approach to develop printable strain hardening cementitious composites
Stefan Chaves Figueiredo et al.
MATERIALS & DESIGN (2019)
The Effect of Material Fresh Properties and Process Parameters on Buildability and Interlayer Adhesion of 3D Printed Concrete
Biranchi Panda et al.
MATERIALS (2019)
Analysis of the production conditions of geopolymer matrices from natural pozzolana and fired clay brick wastes
Guido Silva et al.
CONSTRUCTION AND BUILDING MATERIALS (2019)
Rheology of fly ash-based geopolymer: Effect of NaOH concentration
Yasser Rifaai et al.
CONSTRUCTION AND BUILDING MATERIALS (2019)
Production of geopolymer binders using clay minerals and industrial wastes
Noureddine Hamdi et al.
COMPTES RENDUS CHIMIE (2019)
Micro-cable reinforced geopolymer composite for extrusion-based 3D printing
Guowei Ma et al.
MATERIALS LETTERS (2019)
Experimental study on mix proportion and fresh properties of fly ash based geopolymer for 3D concrete printing
Biranchi Panda et al.
CERAMICS INTERNATIONAL (2018)
Improving flexural characteristics of 3D printed geopolymer composites with in-process steel cable reinforcement
Jian Hui Lim et al.
CONSTRUCTION AND BUILDING MATERIALS (2018)
Compressive strength and microstructure analysis of geopolymer paste using waste glass powder and fly ash
Tawatchai Tho-In et al.
JOURNAL OF CLEANER PRODUCTION (2018)
Methods of enhancing strength of geopolymer produced from powder-based 3D printing process
Ming Xia et al.
MATERIALS LETTERS (2018)
Measurement of tensile bond strength of 3D printed geopolymer mortar
Biranchi Panda et al.
MEASUREMENT (2018)
Vision of 3D printing with concrete - Technical, economic and environmental potentials
Geert De Schutter et al.
CEMENT AND CONCRETE RESEARCH (2018)
Developing and Testing of Strain-Hardening Cement-Based Composites (SHCC) in the Context of 3D-Printing
Hiroki Ogura et al.
MATERIALS (2018)
Investigation of the rheology and strength of geopolymer mixtures for extrusion-based 3D printing
Biranchi Panda et al.
CEMENT & CONCRETE COMPOSITES (2018)
Effect of Polypropylene Fibre Addition on Properties of Geopolymers Made by 3D Printing for Digital Construction
Behzad Nematollahi et al.
MATERIALS (2018)
Compressive strength and microstructure of assorted wastes incorporated geopolymer mortars: Effect of solution molarity
Ghasan Fahim Huseien et al.
ALEXANDRIA ENGINEERING JOURNAL (2018)
High strength geopolymer binder based on waste-glass powder
Mostafa Vafaei et al.
ADVANCED POWDER TECHNOLOGY (2017)
A Review on the Effect of Fly Ash Characteristics and Their Variations on the Synthesis of Fly Ash Based Geopolymer
Oswyn K. Wattimena et al.
GREEN CONSTRUCTION AND ENGINEERING EDUCATION FOR SUSTAINABLE FUTURE (2017)
Alkali-activated building materials made with demolition wastes recycled construction and demolition wastes
Rafael Andres Robayo-Salazar et al.
CONSTRUCTION AND BUILDING MATERIALS (2017)
Cementitious materials for construction-scale 3D printing: Laboratory testing of fresh printing mixture
Ali Kazemian et al.
CONSTRUCTION AND BUILDING MATERIALS (2017)
Structural built-up of cement-based materials used for 3D-printing extrusion techniques
A. Perrot et al.
MATERIALS AND STRUCTURES (2016)
Structure and properties of clay-based geopolymer cements: A review
Liew Yun-Ming et al.
PROGRESS IN MATERIALS SCIENCE (2016)
Method of formulating geopolymer for 3D printing for construction applications
Ming Xia et al.
MATERIALS & DESIGN (2016)
Effects of Alkaline Solution on Properties of the HCFA Geopolymer Mortars
Ahmad B. Malkawi et al.
PROCEEDING OF 4TH INTERNATIONAL CONFERENCE ON PROCESS ENGINEERING AND ADVANCED MATERIALS (ICPEAM 2016) (2016)
Effect of synthesis parameters on the quality of construction and demolition wastes (CDW) geopolymers
Kostas Komnitsas et al.
ADVANCED POWDER TECHNOLOGY (2015)
Waste glass in the geopolymer preparation. Mechanical and microstructural characterisation
M. Torres-Carrasco et al.
JOURNAL OF CLEANER PRODUCTION (2015)
Development of porous fly ash-based geopolymer with low thermal conductivity
Junjie Feng et al.
MATERIALS & DESIGN (2015)
Characterization and Early Age Physical Properties of Ambient Cured Geopolymer Mortar Based on Class C Fly Ash
Ashley Russell Kotwal et al.
INTERNATIONAL JOURNAL OF CONCRETE STRUCTURES AND MATERIALS (2015)
Building components for an outpost on the Lunar soil by means of a novel 3D printing technology
Giovanni Cesaretti et al.
ACTA ASTRONAUTICA (2014)
Mechanical properties and setting time of ferrochrome slag based geopolymer paste and mortar
Mehmet Burhan Karakoc et al.
CONSTRUCTION AND BUILDING MATERIALS (2014)
Substitution materials for sustainable concrete production in Portugal
Paulo Cachim et al.
KSCE JOURNAL OF CIVIL ENGINEERING (2014)
Rheology of semi-solid fresh cement pastes and mortars in orifice extrusion
Xiangming Zhou et al.
CEMENT & CONCRETE COMPOSITES (2013)
Alkaline Activation of Ceramic Waste Materials
L. Reig et al.
WASTE AND BIOMASS VALORIZATION (2013)
Properties of inorganic polymer (geopolymer) mortars made of glass cullet
M. Cyr et al.
JOURNAL OF MATERIALS SCIENCE (2012)
Use of ram extruder as a combined rheo-tribometer to study the behaviour of high yield stress fluids at low strain rate
Arnoud Perrot et al.
RHEOLOGICA ACTA (2012)
A review: The comparison between alkali-activated slag (Si plus Ca) and metakaolin (Si plus Al) cements
Chao Li et al.
CEMENT AND CONCRETE RESEARCH (2010)
Alkali-activated complex binders from class C fly ash and Ca-containing admixtures
Xiaolu Guo et al.
JOURNAL OF HAZARDOUS MATERIALS (2010)
Influence of calcium compounds on the mechanical properties of fly ash geopolymer pastes
J. Temuujin et al.
JOURNAL OF HAZARDOUS MATERIALS (2009)
Workability and strength of lignite bottom ash geopolymer mortar
Apha Sathonsalowaphak et al.
JOURNAL OF HAZARDOUS MATERIALS (2009)
Geopolymer technology:: the current state of the art
P. Duxson et al.
JOURNAL OF MATERIALS SCIENCE (2007)
The influence of calcium content on the structure and thermal performance of fly ash based geopolymers
K. Dombrowski et al.
JOURNAL OF MATERIALS SCIENCE (2007)
Workability and strength of coarse high calcium fly ash geopolymer
P. Chindaprasirt et al.
CEMENT & CONCRETE COMPOSITES (2007)
Mechanism of geopolymerization and factors influencing its development: a review
Divya Khale et al.
JOURNAL OF MATERIALS SCIENCE (2007)
The coexistence of geopolymeric gel and calcium silicate hydrate at the early stage of alkaline activation
CK Yip et al.
CEMENT AND CONCRETE RESEARCH (2005)
On the interpretation of orifice extrusion data for viscoplastic materials
RA Basterfield et al.
CHEMICAL ENGINEERING SCIENCE (2005)
Rheology for the food industry
G Tabilo-Munizaga et al.
JOURNAL OF FOOD ENGINEERING (2005)
Characterization of rheology of fresh fiber reinforced cementitious composites through ram extrusion
X Zhou et al.
MATERIALS AND STRUCTURES (2005)
Influence of sodium silicate amount on the setting time and EXO temperature of a complex binder consisting of high-aluminate cement, liquid glass and metallurgical slag
S Goberis et al.
CEMENT AND CONCRETE RESEARCH (2004)
Alkaline activation of fly ashes:: NMR study of the reaction products
A Palomo et al.
JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2004)
Microanalysis of calcium silicate hydrate gel formed within a geopolymeric binder
CK Yip et al.
JOURNAL OF MATERIALS SCIENCE (2003)
Metakaolin and calcined clays as pozzolans for concrete: a review
BB Sabir et al.
CEMENT & CONCRETE COMPOSITES (2001)
On-site sorting of construction and demolition waste in Hong Kong
CS Poon et al.
RESOURCES CONSERVATION AND RECYCLING (2001)
Alkaline activation of metakaolin and calcium hydroxide mixtures: influence of temperature, activator concentration and solids ratio
S Alonso et al.
MATERIALS LETTERS (2001)
The geopolymerisation of alumino-silicate minerals
H Xu et al.
INTERNATIONAL JOURNAL OF MINERAL PROCESSING (2000)