相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。Investigations of the turbulent thermal-hydraulic performance in circular heat exchanger tubes with multiple rectangular winglet vortex generators
Zhiqiang Sun et al.
APPLIED THERMAL ENGINEERING (2020)
Performance enhancement of heat pipes assisted thermoelectric generator for automobile exhaust heat recovery
Qimin Cao et al.
APPLIED THERMAL ENGINEERING (2018)
Energy saving into an absorption heat transformer by using heat pipes between evaporator and condenser
M. I. Heredia et al.
APPLIED THERMAL ENGINEERING (2018)
Thermal performance of heat exchanger tube inserted with curved-winglet tapes
Sompol Skullong et al.
APPLIED THERMAL ENGINEERING (2018)
Thermal and friction characteristics of a circular tube fitted with perforated hollow circular cylinder inserts
Sumit Kumar Singh et al.
APPLIED THERMAL ENGINEERING (2018)
A numerical study on the performance of the thermoelectric module with different heat sink shapes
Young Min Seo et al.
APPLIED THERMAL ENGINEERING (2018)
Experimental investigation on heat transfer enhancement in a circular tube with equilateral triangle cross sectioned coiled-wire inserts
Orhan Keklikcioglu et al.
APPLIED THERMAL ENGINEERING (2018)
Experimental study on heat transfer enhancement characteristics of tube with cross hollow twisted tape inserts
Yan He et al.
APPLIED THERMAL ENGINEERING (2018)
Thermal performance intensification of a circular heat exchanger tube integrated with compound circular ring-metal wire net inserts
Amit Bartwal et al.
CHEMICAL ENGINEERING AND PROCESSING-PROCESS INTENSIFICATION (2018)
Steady flow around an inclined torus at low Reynolds numbers: Lift and drag coefficients
Peng Yu et al.
COMPUTERS & FLUIDS (2018)
Study of different heat exchange technologies influence on the performance of thermoelectric generators
Song Lv et al.
ENERGY CONVERSION AND MANAGEMENT (2018)
A thermoelectric cooler coupled with a gravity-assisted heat pipe: An analysis from heat pipe perspective
Xiaoqin Sun et al.
ENERGY CONVERSION AND MANAGEMENT (2018)
An experimental and numerical study on the laminar heat transfer and flow characteristics of a circular tube fitted with multiple conical strips inserts
Peng Liu et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2018)
Effect of geometry and applied currents on the exergy and exergoeconomic performance of a two-stage cascaded thermoelectric cooler
Arash Nemati et al.
INTERNATIONAL JOURNAL OF REFRIGERATION-REVUE INTERNATIONALE DU FROID (2018)
Numerical study of fluid flow and heat transfer phenomenon within microchannels comprising different superhydrophobic structures
Masoud Kharati-Koopaee et al.
INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2018)
Thermal performance of rotating closed-loop pulsating heat pipes: Experimental investigation and semi-empirical correlation
M. Ebrahimi Dehshali et al.
INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2018)
Nanofluid heat transfer analysis in a microchannel heat sink (MCHS) under the effect of magnetic field by means of KKL model
S. R. Hosseini et al.
POWDER TECHNOLOGY (2018)
Numerical investigation of heat transfer enhancement using various nanofluids in hexagonal microchannel heat sink
A. A. Alfaryjat et al.
THERMAL SCIENCE AND ENGINEERING PROGRESS (2018)
Numerical simulation and sensitivity analysis of heat transfer enhancement in a flat heat exchanger tube with discrete inclined ribs
Nianben Zheng et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2017)
Numerical study of winglets vortex generator effects on thermal performance in a circular pipe
Y. Xu et al.
INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2017)
Direct numerical simulations on the flow past an inclined circular disk
Xinliang Tian et al.
JOURNAL OF FLUIDS AND STRUCTURES (2017)
Flow past a sphere: Predicting enhanced drag with shear-thinning fluids, dissipative and constant shear-viscosity models
I. E. Garduno et al.
JOURNAL OF NON-NEWTONIAN FLUID MECHANICS (2017)
Autophoretic flow on a torus
Lasse C. Schmieding et al.
PHYSICAL REVIEW FLUIDS (2017)
Heat transfer in turbulent tube flow inserted with loose-fit multi-channel twisted tapes as swirl generators
Suttisak Kunlabud et al.
THEORETICAL AND APPLIED MECHANICS LETTERS (2017)
Numerical simulation and optimization of heat transfer enhancement in a heat exchanger tube fitted with vortex rod inserts
Nianben Zheng et al.
APPLIED THERMAL ENGINEERING (2017)
Thermal characteristic of a turbulent flow through a circular tube fitted with perforated vortex generator inserts
Sunil Chamoli et al.
APPLIED THERMAL ENGINEERING (2017)
Heat transfer enhancement on the liquid side of an industrially designed flat-tube heat exchanger with passive inserts - Numerical investigation
Pourya Forooghi et al.
APPLIED THERMAL ENGINEERING (2017)
Thermo-fluid performance and entropy generation analysis for a new eccentric helical screw tape insert in a 3D tube
S. Rashidi et al.
CHEMICAL ENGINEERING AND PROCESSING-PROCESS INTENSIFICATION (2017)
Multi-objective shape optimization of a heat exchanger tube fitted with compound inserts
Sunil Chamoli et al.
APPLIED THERMAL ENGINEERING (2017)
Numerical study on viscoelastic fluid flow past a rigid body
Y. L. Xiong et al.
APPLIED MATHEMATICAL MODELLING (2017)
Heat transfer characterization in a tubular heat exchanger with V-shaped rings
Witoon Chingtuaythong et al.
APPLIED THERMAL ENGINEERING (2017)
Experimental investigation on thermal performance and fluid flow characteristics in heat exchanger tube with solid hollow circular disk inserts
Alok Kumar et al.
APPLIED THERMAL ENGINEERING (2016)
Heat transfer enhancement for laminar flow in tubes using curved delta wing vortex generator inserts
P. W. Deshmukh et al.
APPLIED THERMAL ENGINEERING (2016)
Heat transfer and fluid flow characteristics of heat exchanger tube with multiple twisted tapes and solid rings inserts
Vijaypal Singh et al.
CHEMICAL ENGINEERING AND PROCESSING-PROCESS INTENSIFICATION (2016)
Thermal characteristic of a tube fitted with porous media inserts in the single phase flow
Wenbin Tu et al.
INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2016)
Heat transfer and entropy generation in a parabolic trough receiver with wall-detached twisted tape inserts
Aggrey Mwesigye et al.
INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2016)
Thermal characterization in a circular tube fitted with inclined horseshoe baffles
Pongjet Promvonge et al.
APPLIED THERMAL ENGINEERING (2015)
Entropy generation analysis for laminar thermal augmentation with conical strip inserts in horizontal circular tubes
Yonghua You et al.
INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2015)
Thermal performance enhancement in a heat exchanger tube fitted with inclined vortex rings
Pongjet Promvonge et al.
APPLIED THERMAL ENGINEERING (2014)
Heat transfer enhancement by multiple twisted tape inserts and TiO2/water nanofluid
Smith Eiamsa-ard et al.
APPLIED THERMAL ENGINEERING (2014)
Validation of a Galerkin technique on a boundary integral equation for creeping flow around a torus
Sofia Sarraf et al.
COMPUTATIONAL & APPLIED MATHEMATICS (2014)
Steady flow past a torus with aspect ratio less than 5
Peng Yu
JOURNAL OF FLUIDS AND STRUCTURES (2014)
Effects of upwind area of tube inserts on heat transfer and flow resistance characteristics of turbulent flow
Jian Guo et al.
EXPERIMENTAL THERMAL AND FLUID SCIENCE (2013)
Effect of perforated twisted-tapes with parallel wings on heat transfer enhancement in a heat exchanger tube
C. Thianpong et al.
2011 2ND INTERNATIONAL CONFERENCE ON ADVANCES IN ENERGY ENGINEERING (ICAEE) (2012)
Heat transfer enhancement in a tube with equilateral triangle cross sectioned coiled wire inserts
Sibel Gunes et al.
EXPERIMENTAL THERMAL AND FLUID SCIENCE (2010)
Turbulent heat transfer enhancement by counter/co-swirling flow in a tube fitted with twin twisted tapes
S. Eiamsa-ard et al.
EXPERIMENTAL THERMAL AND FLUID SCIENCE (2010)
Experimental investigation of convective heat transfer and pressure loss in a round tube fitted with circular-ring turbulators
V. Kongkaitpaiboon et al.
INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2010)
Experimental investigation of heat transfer and turbulent flow friction in a tube fitted with perforated conical-rings
V. Kongkaitpaiboon et al.
INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2010)
Thermal enhancement in a round tube with snail entry and coiled-wire inserts
Pongjet Promvonge
INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2008)
From spheres to circular cylinders: the stability and flow structures of bluff ring wakes
GJ Sheard et al.
JOURNAL OF FLUID MECHANICS (2003)
Investigation of heat transfer and pressure drop in a concentric heat exchanger with snail entrance
A Durmus et al.
APPLIED THERMAL ENGINEERING (2002)